Return number of msdus poped as return value for
htt_rx_frag_pop_hl to process fragmentation indication
correctly.
Change-Id: I104c04757aa8bfac5d6516b1455e1e0506b460a4
CRs-Fixed: 2419759
Currently the sap ctx's channel list is not freed
as part of undo acs, and hence can lead to mem leak
when the do acs and SSR is triggered in parallel.
Scenario:-
1. Turn on SAP
2. Do SSR in parallel
3. Unload WLAN
Fix is to clear the channel list as part of undo
acs.
Change-Id: Ie8dcace1d32aeec2621e785d793290d70c194f62
CRs-Fixed: 2511752
a. when T-put < 18Mbps, do GRO/GRO flush for each RX packet.
b. when T-put can kept stable (18Mbps ~ 60 Mbps) last >= 1 second ,
skip GRO flush logic.
Change-Id: Ic8075f10f72b479c6941d7ac12a71fd90f945094
CRs-Fixed: 2509672
Before sending vdev delete command to target_if layer, attach vdev
delete params to wma_txrx_node's del_staself_req member in wma layer.
This helps while responding to vdev delete command in case wmi service
"wmi_service_sync_delete_cmds" is disabled.
VDEV delete command response is sent to upper layer even vdev_mlme
object is not found.
Change-Id: Idfd8b036ff1ea676dd3ad8be703512ff84f299b7
CRs-Fixed: 2510460
Configuration for Issue:-
DUT configuration:-
1. Configure DUT's country as US where channel 165 does
not support channel bandwidth of 40 mhz.
AP Configuration:-
1 Configure the AP in a country where channel 165
supports channel bandwidth 40MHZ.
Scenario of the issue:-
1.Connect to a diff AP on some channel x with same SSID,
and then roam to this AP.
Observation:-
The DUT would connect in 40 mhz to this AP instead of 20Mhz,
which violates the DUT's country reg rules.
Expectation:-
The DUT should re-connect only in 20Mhz on channel 165, or
only in max BW supported by reg in that country.
Issue:-
The DUT does not consider the max bandwidth allowed for the channel
in the country configured, and allow the re-association only
in the respective bandwidth.
Fix:-
Send the max BW supported by the channels in the current
reg domain to the FW so that it considers the max BW of the
channel and AP capability and then roam in the respective BW
only.
Change-Id: I1730d6c65d3dd305dcf2ebe340c3d5ad950761d7
CRs-Fixed: 2504900
Reduce the log level from err or info to debug so that logs
are not printed on console.
Change-Id: I0d33c2a8f5b4bb4974656ac0d1eb6713a74cb5f4
CRs-Fixed: 2516281
MPTA helper and Coex configuration features are not included
after latest system compilation updating. Modify configure
file qcs40x.snoc.perf_defconfig to include them.
Change-Id: I8ecad6c84bd4ca2d8e1b69f0cea14b61b2545ca3
CRs-Fixed: 2511723
As part of RSO update config, roam scan mode is set to 4 before
the WMI_ROAM_SCAN_RSSI_THRESHOLD command is sent to the firmware.
And after WMI_ROAM_SCAN_RSSI_THRESHOLD is sent, the roam scan
mode value is again set back to 7(value 7 enables RSSI scan and
periodic scan). There is a very small window between these two
commands where BMISS event is received and firmware forwards it
to the host which causes a disconnection.
Fix is to disable sending roam scan mode to 4 before sending the
WMI_ROAM_SCAN_RSSI_THRESHOLD command.
Change-Id: I2c22308d711e71e67d132a0bd121aed66497998b
CRs-Fixed: 2508762
Currently Host issue a disconnect and cleanup for current AP,
even if the offloaded roaming feature has started, but has not
completed for some reason. This results in connection loss with
the current AP.
Fix is to call abort event SIR_ROAMING_ABORT in case of roaming
offload timeout in order to maintain the connection with the
current AP.
Change-Id: I4168f8aeb7a759896a5d93e1918ce6542e61b37e
CRs-Fixed: 2508449
Currently, HOST sets discon_in_progress flag after posting
ROAM_SCAN_OFFLOAD_STOP command to WMA for a session. In case of
disconnection in HOST while roaming in FW if ROAM SYNC IND from fw comes
to host after posting ROAM_SCAN_OFFLOAD_STOP command to WMA, host start
processing SYNC IND and FW start processing ROAM_SCAN_OFFLOAD_STOP
which will cause to cleanup/disconnect with new AP to which it has just
roamed. After this cleanup fw will send HO_FAIL.
Now host as part of roam sync indication sends PEER_REORDER_QUEUE_SETUP
for the deleted peer which results in firmware assert.
Fix is to set discon_in_progress flag to true before posting
ROAM_SCAN_OFFLOAD_STOP command to WMA in order to ignore ROAM SYNC IND
and return status as failure to fw.
Change-Id: Id5c787d5489a6c0722b090951db388484f94f2e9
CRs-Fixed: 2505851
When driver receives the command to disable the channels
it maintains a list of the channels which are disabled.
During SAP stop, driver restores the disabled channels
but it is not freeing the cache list. Now when again the
command is issued to disable the channels, driver is not
processing this command as it still has the channels in its
cached list which were disabled during previous command.
This results into failure of current command and all the
subsequent commands to disable the channels until the
cache list is not cleared with set_disable_channel_list
command with empty channel list.
To address above issue, clear the cache channel list
as soon as driver restores the channels on stop bss.
Change-Id: I6b8c7ba250ef38b892ab83621add45fbfc09a2cd
CRs-fixed: 2496642
In HL data path, when HTT credits are used outside the HL scheduler,
credits are getting deducted form target_tx credit only.
When CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL is enabled, credits
should be deducted from TXQ group also.
Change-Id: Ice4160043fc1d812686f8ce7ee310110299d2276
CRs-Fixed: 2485819
Copy the sap channel list that is obtained after filtering
the channel list from all the checks like SRD, DFS
to maintain the sync between the ACS module, and the sap
channel select logic.
Change-Id: I78a835f700ab34fa81b9b748e6ad28ca3b726650
CRs-Fixed: 2513628
WMA interface PMF capability is vdev configuration hence do not
update the capability in WMA interface based on peer capability.
Change-Id: I08b39b9bc631321aa77aa1ab3bcbf1841bb3dda1
CRs-Fixed: 2504060
Vdev_id and ENABLE_ROAM_TRIGGERS_ALL are passed to
hdd_send_roam_triggers_to_sme in reverse order. Pass them in
correct the order.
Change-Id: I79d2a843ee9f237620d31dbf91e3c57750e66e88
CRs-Fixed: 2514476
As part of vdev target if convergence the new vdev command
resp time are defined in target if layer.
So use the vdev timer values from target if.
Change-Id: Ib74f91331e4cb470233e678ded9159e17045467e
CRs-fixed: 2513794
As per current implementation, hdd_mic_flush_work makes a call
to qdf_flush_work irrespective of whether the work is initialized
or not.
Since flush_work() without INIT_WORK() is erroneous, ignore the call
to flush_work if work is not initialized.
Change-Id: Ib96439e1416188e643935a4ddaa13671d221c1e2
CRs-Fixed: 2514424
Currently, as part of ndi_delete broadcast sta id is set
to invalid. But set this sta id to invalid as part of
ndi delete response from FW.
Change-Id: I4df843c4bce1c06b5c62cfd932b681e3320e5341
CRs-Fixed: 2513607
In case of DBS, two AP can operate on different band together.
Current logic of resetting CAC state in sap_clear_global_dfs_param
function assumes that if two APs are up state then it must be SCC
scenario and resulting in dropping of tx packets if stop follwed by
start operation is performed on AP on DFS channel.
This change reset CAC state as part of stop AP if another AP is
operating on 2.4GHz in case of DBS operation.
Change-Id: I3f71606bf610d45184a0fa81d2b9d9a6c11f72e8
CRs-Fixed: 2509808
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST is a nested attribute which
carries frequencies as sub attributes. Validate the size of each
sub attribute to make sure it's of size uint32_t. Extract the
frequencies if all are of valid size. Return failure if an
invalid length attribute is found.
Change-Id: I1743c2dbef640b28b78504a548edbb70f4f29e49
CRs-Fixed: 2513822
If radar event is indicated in station vdev, it may be dropped by
station vdev since station does not support DFS master.
Select first sap vdev started in dfs channel to handle radar event.
Change-Id: I74229eb02c6ae6d81042df6b736d231db26253b5
CRs-Fixed: 2512836
Scan period is configured through the DRIVER command
SETROAMSCANPERIOD currently. Add provision to set the same through
the roam subcmd and the attr QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD
Change-Id: I3dd56f56ac8bc4ba48a88f8df292e9d4d5545fed
CRs-Fixed: 2509656
Use "client mac address" in bootp protocol to get
station id to handle scenarion when
DHCP exchanges(discover/offer/request/ack) happens
with broadcast address as destination address.
Change-Id: Ie233b2ffed1533f0a45fded199bb09649e48b4dd
CRs-Fixed: 2506023
Userspace may query for current configured full roam scan period
through the vendor cmd QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET
and the attribute QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD.
Fill the full scan period in the same attribute and send as reply
Change-Id: I0ab8b3d7b469515244ce27accc852c6d93514b2d
CRs-Fixed: 2508804
Userspace may configure and enable roam control and query for
the status. Add provision to send the same as vendor cmd reply
Change-Id: I7b82f85fa560c974eedc5115276bd87a84f9d3a0
CRs-Fixed: 2508802
Firmware only supports offloading in STA and P2P CLI mode, so remove
NaN offloading option.
Change-Id: I1adb8ead32a0d45a34f72590c33309b17d6c80c0
CRs-Fixed: 2512426
When wifi is off, unnecessary error logs are printed. To avoid these logs
from printing, move hif context assignment to right before its usage.
Change-Id: Ie2313f796674885a7a518693a09877df4e6cb817
CRs-Fixed: 2513187
Topic: 6ghz_chan_to_freq
Convert channel to freq in tpAddBssParams and wma_vdev_start_req
structure to avoid duplicate channel numbers in 6ghz, and 2.4ghz
operation.
Change-Id: I8f657a566d1555efa07bf9155b84c37431c57f86
Crs-Fixed: 2511312
