PMKR0 buffer's length is currently 32 bytes in struct
pe_fils_session, which is incapable of storing the
value of Q when SHA384 is used for authentication.
Enlarge the PMKR0 buffer to 48 bytes in case SHA384
is used.
Change-Id: Ib935a4dfc6fc415453d3c3b9cf458cc3b0f4f0a2
CRs-Fixed: 2462643
CSR is populating TX SSID in NonTx to NonTx
BSSID roaming scenario.
SSID is populated from the TX beacon instead
of the generated NonTX beacon. MOdified code
to populate the IE's from NonTX beacon.
Change-Id: Ib02f320ba0e6622ad79a1bd2429ad5f61e53b71b
CRs-Fixed: 2462018
When BTM config is disabled in the supplicant, the BSS
transition bit (19) of the extended capabilities will be
disabled. If BTM offload is enabled, currently driver still
advertises that the BSS transition bit(19) as disabled. This
results in AP disabling 11v for this STA.
Advertise the BSS transition bit (19) as enabled in the extended
capabilities if btm_offload ini bit 1 is enabled.
Change-Id: I7c1977294a2e166321951ee0ec31f18929c42176
CRs-Fixed: 2455919
Function mlme_get_dynamic_oce_flags can return the NULL value.
Avoid and check for NULL pointer in the callers.
Change-Id: Idc83a9e5dea812a73fed24de3aa2c2c49436f7d1
CRs-Fixed: 2462716
Reject AP list which is maintained by the blacklist manager
has to be sent to the FW for roaming case scenarios, as
the blacklist, and rssi reject APs should not be preferred
in the reassociation.
Change-Id: I58bf90e17653dde2a5042780ba7d57fa3115d63a
CRs-Fixed: 2461230
Add logic to add a bssid in the reject AP list maintained
by the blacklist manager. The logic includes addition of
userspace blacklist, avoid list, RSSI reject list,
and not deletion of lowest delta BSSID if the space in the
reject ap list is full.
Change-Id: I0c359f510510582099059fbb9cc098f5a3f91c1b
CRs-Fixed: 2460795
Add logic to filter the bad BSSIDs present in the scan list
with the BSSIDs present in the blacklist manager's reject ap
list.
Change-Id: I3a19be753b64387e251e3a9bc740865bf80251a8
CRs-Fixed: 2460788
BLM:- Blacklist Manager
Add the basic infrastructure such as target-if, tgt, init,
deinit, ini files, core and main files for the new component
Blacklist Manager.
Change-Id: I624a779ee0dd6be7cb26a911af0aefd426ca9bff
CRs-Fixed: 2460602
In the target_if layer based on the mc address list count the
filter params are filled and sent to the firmware. If the mc address
list passed is more than the maximum supported address list there
can be possible buffer overflow.
Sanitize the mc address list count to avoid any overflow.
CRs-Fixed: 2452131
Change-Id: I03208a5487cfd730e933666c47accb2e46fbbc72
In order to ensure that HT40 is enabled by default on 2.4 GHz
remove gChannelBondingMode24GHz entry from INI file and set
the default value of gChannelBondingMode24GHz to 1.
Change-Id: I8b7657e3eef5f4ec19863c8da6a611a63ccecd9c
CRs-Fixed: 2461593
In case of STA+STA to configure 11k for second STA without
assertion, the driver should de-config 11k for currently
enabled STA. Currently, driver de-configures 11k but not updates
corresponding vdev id results vdev id for which roam disable and
11k disable sent to fw could be different. This leads to assert
in fw.
Fix is to update corresponding vdev id also for which driver
de-configures 11k.
Change-Id: I841a0561124cf110096f5326f2d9ba191518d3f2
CRs-Fixed: 2460097
The Linux Coding Style doesn't allow mixed-case names so rename
pePersona to opmode in struct pe_session to be in compliance.
Change-Id: I3434bdba5300fb89c7e78cd16dacfd151ba7c00b
CRs-Fixed: 2459760
Few IOT APs advertise reduced NSS capabilities on ending
up in bad state. These APs can later recover to support
the actual NSS capabilities. In this scenario, when STA
initiates connection to these APs, which are in bad state,
reduced NSS capabilities is advertised. STA cannot later
upgrade NSS capabilities to the minimum of STA max NSS
capability and APs actual NSS capability, once AP recovers.
Fix is to advertise max NSS capability during connection
with these IOT APs based on vendor OUIs and downgrade if
AP still advertises reduced NSS capability in association
response.
Change-Id: I49ea13534b1a44fd9ffadd1e8fb44e9d782147c4
CRs-Fixed: 2453938
In function mlme_init_btm_cfg(), initializing the
btm_solicited_timeout, btm_max_attempt_cnt and btm_sticky_time
is done using the cfg_default() api, which always returns the
default value irrespective of the ini configured. This results
in failure of ini configuration from the WCNSS_qcom_cfg.ini file.
Use cfg_get() api to get the default value of ini items.
Change-Id: I773676cc67878f233cb6d14e0ad3ec1d79a5518f
CRs-Fixed: 2461612
Provide platform driver interface for idle restart/shutdown for
PCIe bus in PLD. Remove PCIe power off call for discrete PCIe bus
enabled SoC such that platform driver can execute proper SoC power
off sequence.
Change-Id: If08186247e89a4182cadbf83817dce4f02654ecc
CRs-Fixed: 2431419
The current default value for gActionOUISwitchTo11nMode ini
leads to forcing 11n connection with vendor APs which don't
require the WAR.
Fix is to update the default value of the ini to restrict
the WAR to appropriate vendor AP.
Change-Id: Ia148da288ee16a62a8b32e54b1801bb9d19031e2
CRs-Fixed: 2461414
Fix an issue where driver downgrades HW to single MAC mode for
NAN + NDI concurrency. DBS must be enabled for since NAN operates
in 2G.
Change-Id: Ie4d76e7a73d40ce663c6f907693954b62add0394
CRs-fixed: 2460830
In csr_roam_joined_state_msg_processor, roam_info->tx_stbc is
assigned twice because of a typo.
Assign roam_info->rx_stbc as the value of
pUpperLayerAssocCnf->rx_stbc.
Change-Id: Ic90f6b486a50dcc3aca8cb7171a137a34319914d
CRs-Fixed: 2460716
Abstract the callback hdd_softap_ipa_start_xmit by
hdd_softap_ipa_start_xmit, to match the return type of
wlan_ipa_softap_xmit pointer, to fix a CFI failure.
Change-Id: If1cb1a80801558d5c7831ec89ad5281b0bbe36f3
The request_firmware() will take too long time(60s) when the
requested fw file do not exist. Replace this API with
request_firmware_direct.
Change-Id: Ie40db69a24dc1e0b86f140ca1aad91bd3b10e95e
CRs-Fixed: 2435125
A VHT beamformee shall indicate the maximum number of space-time
streams it can receive in a VHT NDP in the Beamformee STS
Capability subfield of the VHT Capabilities Information field of
the VHT Capabilities element. The SAP is advertising STS value
as 8 in both 2G and 5G band. This may cause IOT issues.
Fix the default value of beamformee STS capability value as
default value 3 for SAP.
Change-Id: I026eabeea941a33f1ffab6e498e6de90e182320e
CRs-Fixed: 2448390
WiFi chip in SDXPRAIRIE supports DBS, and it is OK to start AP+AP in
DFS channel in DBS mode.
If CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE is defined, AP+AP in
DFS channel in DBS mode fails to start.
Remove CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE definition to make
AP+AP in DFS channel in DBS mode work for SDXPRAIRIE.
Change-Id: I1947b480aca2acb3245350c73935f6a4f9af964f
CRs-Fixed: 2459215
If tdls feature is disabled, as currently tdls_osif_init_cb is called
before checking flags, tdls_osif_deinit_cb will be missed which causes
memory leak.
Do tdls_osif_init_cb after checking tdls_feature_flags.
Change-Id: I008c69a9b39f5321d1ca79f5193539f5abd32a02
CRs-Fixed: 2459853
The linux coding style forbids use of typedef unless clearly
some rules are met. The tSirBssDescription doesn't match any of
those criteria, so replace it with underlying structure
bss_description.
Change-Id: I36ad517325117cf04d499c7c472ca6ef5921a85d
CRs-Fixed: 2459769
The Linux Coding Style doesn't allow mixed-case names so rename
bssIdx in struct pe_session to be in compliance.
Change-Id: Idf2df6cb4ca30e4fdae74b8fb39445bb878003c5
CRs-Fixed: 2459768
From Android Q onwards LOCAL_MODULE_TAGS set to debug
variant is deprecated, thus set LOCAL_MODULE_TAGS
to optional variant by removing LOCAL_MODULE_TAGS.
If a module doesn't specify a tag (by LOCAL_MODULE_TAGS),
its tag defaults to optional.
Change-Id: Iecadd3bf07a375e2cfb044b400330c490f2023b0
CRs-Fixed: 2452507
For implicit and external control the tdls connection is
established based on the tx and rx pkt count. But currently,
pkt count with connected AP also tracked.
Do not track packets for connected AP as TDLS is not possible
with connected AP.
Change-Id: I29d6f4e7858de1ec453d64b6fce548f5132c57d4
CRs-Fixed: 2457524
