When AP rejects assoc request based on poor rssi
host will put the AP in blacklist mgr list, only when
rssi value improves by threshold value,should the
STA try to connect to AP.
Change-Id: I78009b89ea07afdd5f3381973a9eb7ec1f73d1b5
CRs-Fixed: 2632015
Presently vdev delete is sent to firmware 1st and the object manager
vdev delete is deleted after all the references are released.
With this change the vdev delete is sent to firmware when all the
references are released and the vdev delete is sent to firmware via
the object manager vdev delete notification.
Change-Id: I67bea0d2b2a0d2d9eb4602e5d0b8bbdcafdd4d26
CRs-Fixed: 2618278
Currently, driver send a generic reason code
eSIR_MAC_DISASSOC_DUE_TO_INACTIVITY_REASON to userspace when a
STA kickout happens. Send eSIR_MAC_SA_QUERY_TIMEOUT when STA
kickout happens due to SA query timeout.
Send eSIR_MAC_PEER_XRETRY_FAIL when STA kickout happens due to
XRETRY failure.
Still host sends deauth frame with reason code
eSIR_MAC_DISASSOC_DUE_TO_INACTIVITY_REASON.
Change-Id: I72fa7406ef1b131ef3519bb6bef21cc52bc548cb
CRs-Fixed: 2624948
Firmware advertises WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT
at the time of initialization. When user requests for roam scan channels
to driver using GETROAMSCANCHANNELS command, driver queries firmware for
roam scan channel list by sending wmi command with command id
WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID and vdev id.
Firmware response to WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID commmad is
WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID. This event has roam scan channel
list, vdev id, connected BSSID, command_response.
Firmware issues WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID event for two reasons,
one for GETROAMSCANCHANNELS command where firmware sets command_response=1
in wmi event and asynchronous event upon disconnection where firmware sets
command_response=0 in wmi event.
Change-Id: I690aca6c3f1e3aa7ae1fe54aadc839ea19446079
CRs-Fixed: 2621535
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: Ifed2431882b1f7d2869771e812daa5bcd5dc17e9
CRs-Fixed: 2619314
After deauth/disassoc, roaming is triggered by the firmware and
if roaming failure occurs before handoff is started, then
firmware sends the WMI_ROAM_EVENTID event with deauth reason.
Currently unspecified reason is sent to the upper layers for
every emergency deauth roaming failure.
Extract the reason code from the deauth/disassoc frame sent by
the AP, received in WMI_ROAM_EVENTID.
Change-Id: I461a38e8a8e60fa26b2ace3f54a6f8208f00838d
CRs-Fixed: 2611473
Currently, wifi-pos uses channel number to get the fwr phymode.
For adding 6g support wifi-pos need to get the phymode from
frequency instead of channel number.
As a part of fix, Add handler for getting phymode based on
frequency
CRs-Fixed: 2617906
Change-Id: Ie65b3ed98760cef152df3697805593efbad4d5a1
Add vdev start check such that host does not send ARP_NS stats command
to FW when vdev is already stopped.
Change-Id: I94c0b4c26db3f48c7b2de1ad3003c0f0520fa396
CRs-Fixed: 2621587
As part of the vendor extended stats, add API to
request Rx hardware stats for a given vdev id.
Change-Id: I46d73de21724c4c5ebf4a78075b7b2c1d02fe92a
CRs-Fixed: 2605729
lim_sta_send_add_bss_pre_assoc, sta_send_add_bss and
wma_send_peer_assoc have duplicate logs.
Also send_peer_assoc_cmd_tlv print all the required info with
flags and other params.
So remove the duplicate logs and keep only missing info in
sta_send_add_bss and wma_send_peer_assoc, which is not printed
anywhere.
Change-Id: Ic5aa63f1a4296553b584bcc768d8c5cb04ddddf3
CRs-Fixed: 2616910
As per the logic implemented in the FW, it will send a dummy event for
link layer stats in case the buffer allocation fails. In this case,
there can occur a scenario in host wherein we are not properly freeing
the previously allocated memory.
In the event handler wma_unified_link_radio_stats_event_handler, if the
event is dummy, we are updating the value of the num_radios inside
wma_handle->link_layer_results. This num_radios is later used to free
any allocated memory. On setting it to zero, we are preventing that
memfree to occur; leading to a memleak.
To fix this, in case there is a dummy event, first free any possible
previous results before setting the num_radios to be zero.
Change-Id: Ibe4ddf1a137a33130100483cefb004b7dae4ce02
CRs-Fixed: 2610754
Currently, the driver schedules the message to set
power save enable/disable to FW as part of the
set power mgmt command received from the userspace.
This command is then scheduled and is sent via
the scheduler thread.
Generally, userspace sets the power save disable
when it starts the DHCP process and enables the
power save back when the DHCP is completed.
DHCP packets are sent through the Datapath and the
PS enable/disable command would be sent via the
control path explained above.
the Race could happen that the scheduler was busy
with some other task and the PS disable command
was in the queue and the DHCP process began.
This would result in DHCP packets going to the peer
with PS enabled.
The fix is to set the power save enable/disable directly
instead of using the scheduler path.
Change-Id: I0f2aed37f875c283f318fb44bcc40d0ab401413a
CRs-Fixed: 2611480
Add support to make event WMI_ROAM_PMKID_REQUEST_EVENTID as
wakable in FIPS case.
In FIPS Enabled case, for roaming Firmware sends PMKID request
to host as firmware is not supposed to do crypto functionality
with FIPS enabled.
Change-Id: I09b6b68f77ba75f9e5519ff18017c95d16771f52
CRs-Fixed: 2513790
Add support to fallback the PMKID generation from firmware to
wpa_supplicant.
In FIPS Enabled case, for roaming Firmware sends PMKID
request to host as firmware is not supposed to do crypto
functionality with FIPS enabled. Once the roam candidate
selection is done in the firmware, it sends the
WMI_ROAM_PMKID_REQUEST_EVENTID. After receiving this event
the host driver triggers an event to wpa_supplicant using
NL80211_CMD_PMKSA_CANDIDATE for PMKID generation. Then
wpa_supplicant responds with PMKID to host using
NL80211_CMD_SET_PMKSA. And host updates the wmi pmk cache
and indicates the firmware via WMI_PDEV_UPDATE_PMK_CACHE_CMDID
wmi command.
Change-Id: I7d33a2b92f97260fa5a7e742b6f877adc7eced55
CRs-Fixed: 2512955
Currently many layers store the datapath handles i.e.
pdev and vdev handles and use them for passing as an
argument to the CDP APIs. This gives way to possible
race conditions, where the datapath handle provided by
the outer layer might be a stale pointer, which in turn
leads to unexpected results.
Remove the storage and usage of all the datapath handles
from the layers currently using them.
- cds_context
- vdev objmgr
- pdev objmgr
Change-Id: Icf24bd3792af203d1a06e153f0badd6e7405559f
CRs-Fixed: 2602199
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: I014acfc5d97a2bf00831259b9811b3c5bc7610a1
CRs-Fixed: 2528554
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I5134ca882f5fcf0e5941317e48712717eddb58fe
CRs-Fixed: 2541708
When CONFIG_WLAN_FEATURE_11W is disabled, compilation of lahaina still fails
in a few areas. Even though CONFIG_WLAN_FEATURE_11W should be always be
enabled now, add appropriate fixes for the compilation issues in the event
that CONFIG_WLAN_FEATURE_11W is disabled.
Change-Id: I1743678df6b66a63160795374de7969f313f55d9
CRs-Fixed: 2601362
DUT as SAP and disabled LDPC, but peer supported LDPC and DUT still
TX data packages by LDPC coding. This behavior is different to other
vendors. This change disable LDPC capability of peer when associating.
Change-Id: If90944ca359c7164d4acecfe1d6146e3d2b30b5d
CRs-Fixed: 2599860
Remove deprecated code because of CRYPTO_SET_KEY_CONVERGED cleanup
in MAC layer.
Change-Id: I65bc90b457cdd642d64d6ab0e6829856ee93e472
CRs-fixed: 2593528
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in WMA layer.
Change-Id: If70fc5cb01f2a0123030c92410e126ce8078e1c6
CRs-fixed: 2593526
While sending peer_assoc_cmd to FW,add 6ghz HE band capability
if chan_freq is 6ghz.
Change-Id: Icfe886e8c9089d2c58609866e5bc64250c2b6eea
CRs-Fixed: 2591039
Currently cdp ops are given pdev/vdev/peer
handle as its arguments which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_data_tx_cb_set
- txrx_mgmt_tx_cb_set
- txrx_mgmt_send_ext
- txrx_pdev_attach_target
- txrx_pdev_detach
- txrx_vdev_attach
- txrx_vdev_register
- txrx_vdev_detach
- txrx_peer_create
- txrx_peer_delete
- txrx_peer_delete_sync
- txrx_fw_stats_get
- txrx_get_vdev_from_vdev_id
- txrx_pdev_set_ctrl_pdev
- txrx_pdev_attach
- txrx_get_vdev_mac_addr
- txrx_pdev_post_attach
- txrx_pdev_pre_detach
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: Ib8b0b1edd63e7c3f8813b11ca26b50ec121fe255
CRs-Fixed: 2541459
Presently, during Subsystem Restart(SSR) the object references
are not released cleanly, invoke stop adapter during the SSR
to have common functionality between the netdevice going down
and SSR.
Change-Id: I2980379022f62ef27dea92868c8033c087544d50
CRs-Fixed: 2587443
1. Update pAddBssParams->ch_width to 160Mhz ch width value
based on VHT operation IE's ch width, channel segment 0
and channel segment 1 fields.
2. Report link rate information to OS for 160Mhz based on
rate flag TX_RATE_VHT160.
The change will fix the incorrect bandwdith reported by
IW commmand (iw wlan0 link) when STA is connected to AP
in VHT160 mode.
Change-Id: I698b12da825619e8e8f28f0cf4ea1ccf2e7072e6
CRs-Fixed: 2585986
Update tx rate flags to include 160Mhz bandwidth in
wma_set_bss_rate_flags_he.
Add HE 160 mcs to rate mapping for nss 1 and nss 2.
This change will fix incorrect bandwidth report via
IW command: iw wlan0 link.
Change-Id: Idd1adc4f2783b86a2a837999ea87bb38c813f213
CRs-Fixed: 2585078
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I502312f25d2754984b86e1cc4e011800a5d4b58a
CRs-Fixed: 2573464
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
Cleanup peer id from the callers of cdp APIs from
where the peer ID was passed, and use mac address
instead to identify the STA.
Change-Id: Ie6dcae77e959439a71c11b1a2fa0daddcaa6e719
CRs-Fixed: 2529822
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539735
Change-Id: I2baad09fde29d439ae2099e01e4e68ed6b94196d
Presently as part of the vdev creation the self peer for the vdev
is created in the object manager and in the firmware. The self
peer creation in the object manager needs the vdev to be in the
created state. As part of new changes to send the vdev create to
firmware as part of the vdev creation notification there will be
failure in creating in the self peer.
Hence, drive the self peer creation from the SME layer which will
create the vdev.
Change-Id: I0875f4ec5bd96438c0f21056e1d6920d3be2a177
CRs-Fixed: 2555868
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement.
Change-Id: I583059190827c9aed8d8089412a4cfac92ddf4c9
CRs-Fixed: 2554859
Vdev start/stop/delete events have been registered in
target_if_vdev_mgr_wmi_event_register in MCL/WIN common code.
Change MACRO name SERIALIZE_VDEV_RESP_TIMER to
SERIALIZE_VDEV_RESP.
Change-Id: I4d54a4755d7311b488f12f46a73db7e4645a4e0b
CRs-Fixed: 2554732
This change is to support 11ax linkspeed rate
on UI.
It supports different config for gReportMaxLinkSpeed.
Current 11ax rate support to max 80 nss2 mcs11.
Change-Id: Iff8cbafe1354ab50c4b3a90ef8ab698a3350a21d
CRs-Fixed: 2529291
Update SME/CSR for using channel frequency in STA connection
params and handle 6G AP IEs for association.
Change-Id: I1725223b6763a729762b604c850c9b493f739ae6
CRs-fixed: 2552009
With des_chan->ch_phymode already having the chanmode value,
remove chanmode from from struct wma_txrx_node to use common
des_chan->ch_phymode
Change-Id: Ib34a032b541367305a9fdba998ed6a00073ac9aa
CRs-Fixed: 2550440
Remove sta index references in lim since mac address
would be used instead of this index as part of the
sta index cleanup.
Change-Id: Ia7cbb94cf988a04506440ddaca6b1c302e13e852
CRs-Fixed: 2524509
Remove usage of cdp APIs to fetch local id and cleanup
few sta index references in wma and lim.
Change-Id: I32633ef7491b3b91ee55dd813a009c4d8010a3f5
CRs-Fixed: 2524506
