Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
ipa_is_fw_wdi_activated is invoked in the context of default 100ms
bus bandwidth calculation timer. Any logs will lead to excessive
messages and fix is to ratelimit these possible log messages.
Change-Id: I6e408187759bb6b6a5c511f2f88c2b14f4c889ab
CRs-Fixed: 2279024
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Enable the converged configuration component in the Kbuild. Also, hook
into the cfg parse and release APIs.
Change-Id: Id0df669a34463e9f51bd5cc5bf2939fb1ac6228d
CRs-Fixed: 2258233
There will be excessive logs in exception path when running SAP embedded
traffic since these logs are per packet.
Fix is to ratelimit all logs in IPA exception path to avoid excessive
logs.
Change-Id: Ia96a60f4de145740d7099b432c92e7b5785047d2
CRs-Fixed: 2272014
User can override the Listen Interval value set during association
by using wifi config set vendor command. Since there is no limit
check in host, a very high value causes an assert in the Firmware.
Add an upper limit check on the user Listen Interval value.
Change-Id: I8128ccbb875adf57c95a15d0391fb442d3dbbbc3
CRs-Fixed: 2256334
WLAN logs are excessively filled with
IPA logs when IPA performance level
is set.
Remove unnecessary logging in
hdd_ipa_set_perf_level().
Change-Id: I07563c1a6e98981e2b074bce7a969c9cbd94ec24
CRs-Fixed: 2268632
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: Icfcc28fb592ee99704d8fb23bc3cb45b6e4c9f53
CRs-Fixed: 2266718
The change id I50c357ca0f8ddfcc1a51ad4ed040961daf052459
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I33d83b5777ea259e29175e632a36e5fec3be24bc
CRs-Fixed: 2262351
Currently while going to suspend, dtim parameters are not
correctly getting configured. Some other parameters to config
like the inactivity timeout are completely skipped as well.
Cleanly port the setting of dtim and other parameters during
suspend and resume.
Change-Id: Ic41a8ace3f5650e53f2dcaa416bfe241b87aa88d
CRs-Fixed: 2248160
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the pmo component.
Change-Id: Ia23e1d0eed5a88b0cb1caf4feebd535d36ca2690
CRs-Fixed: 2261705
In case of rmmod if stop bss fails SAP IPA interface is not
deleted. So again at next driver load IPA will be holding the
stale IPA header and new IPA header will not be added at IPA
interface creation. In this change clean IPA interface when SAP
stop bss fails.
Change-Id: I3a1bf891752308ba1a29d6768f24880d8514d5bf
CRs-Fixed: 2224307
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
Some times HTT response for suspend IPA pipes from FW host arrives
after vdev has been cleaned up at FW. After receiving FW HTT IPA
pipe suspend response HOST processes pending events. For event AP
DISCONNECT HOST sends IPA offload disable command to FW with vdev
id that has been deleted at FW. As a result FW asserts.
In this change before processing IPA WLAN pending events validate the
session. If session exists then only process the events.
Change-Id: I464a91c3a85e6002297d9ade2fbd45b45a2a4d51
CRs-Fixed: 2261111
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
There are several logs in PMO that log debugging related information
at the INFO level. Reduce the logging level of these debug logs to
avoid spamming the console.
Change-Id: Ib1bb9279d5d8104104b58bd2c83869f72c0bde4a
CRs-Fixed: 2260190
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
With IPA WDI unified API, IPA PM is used instad of IPA RM
for power/resource management. When checking if IPA clk
scaling is enabled or not, HDD_IPA_RM_ENABLE_MASK is thus
not applicable for WDI unified API.
Change-Id: Ie18c2ba6168a06a3bf03f6a5754ffef98113ce30
CRs-Fixed: 2256015
With IPA WDI unified API, IPA PM is initialized after WLAN IPA pipes
are connected. Initializing IPA perf profile will fail if IPA pipes
are not yet connected.
Fix is to
1. Initialize perf perofile only after IPA pipes are connected
successfully.
2. If clk scaling is disabled, initialize perf level to maximum.
3. Allow driver to proceed if perf profile initialization fails.
Change-Id: I3a63e0f1decec10440467da62cb6ccf740eda318
CRs-Fixed: 2258682
Currently while sending wmi command when target is suspend, it will
check whether command is WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID/
WMI_PDEV_RESUME_CMDID, but D0WOW command is an exception, to keep align
with legacy code so don't set wmi_handle->is_target_suspended if it is
D0WOW enable command.
Move out logic of checking D0WOW status from PMO tgt to core layer.
Change-Id: I164f24ea733e54e5e0dbdb77344917df5d039e53
CRs-Fixed: 2254047
There are several logs along the suspend/resume code paths that log
debugging related information at the INFO level. Reduce the logging
level of these debug logs to avoid spamming the console.
Change-Id: I0e81901e4a053038392c1012600ae125a1ad27a3
CRs-Fixed: 2258093
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
In the case of invalid iface_ctx, the stats reset operation is not
needed, so removed it.
Change-Id: I48b4b42717451e1ccbfc9753147e65d35ff78df4
CRs-fixed: 2254683
When running embedded tput between client and SAP, there'll be
excessive logs per packet. Fix is to remove the per packet
debug message.
Change-Id: I846f4fd5e54cc8945b3159c56e04418feea0183f
CRs-Fixed: 2253186
Fix a few things in one shot.
- clean up some code to avoid potential NULL pointer dereference.
- add a helper function - wlan_ipa_free_tx_desc_list() to
avoid duplication.
- rearrage wlan_ipa_teardown_sys_pipe() to allow others' reference
Change-Id: I9d6391a7f20ae427bf59f07958bd13f349e61d83
CRs-Fixed: 2233867
In function wlan_ipa_uc_loaded_handler,the qdf_dev is as return of
wlan_psoc_get_qdf_dev(),which maybe NULL,then NULL reference could
occur later.
Change-Id: I3c6d5af35934deef643cb600b1966c22769c71ed
CRs-Fixed: 2250977
When ipa_check_hw_present() returns false, g_ipa_config
is left as NULL pointer. ipa_config_is_enabled() and
ipa_config_is_uc_enabled() will lead to NULL pointer
dereference.
Fix is to check against g_ipa_config NULL pointer
in ipa_config_is_enabled() and ipa_config_is_uc_enabled().
Change-Id: I95da7aede7d72db8591102eea7504cad59686105
CRs-Fixed: 2246224
There are two types of WLAN IPA exceptions, where WLAN driver is
involved for packet processing.
One is for RX exceptions, such as ICMP or Intra-BSS packets.
The other one is for WDI 1.0 MCC TX SW path, where packet queueing
is happening in WLAN driver.
In both cases, skb is allocated in IPA driver. If NBUF_MEMORY_DEBUG
is defined and qdf_net_buf_debug_acquire_skb() is not invoked for
the skb, qdf_nbuf_free() will trigger ASSERT to report unallocated
buffer.
For early processing of RX exceptions, dev_kfree_skb_any() needs to
be called instead of qdf_nbuf_free() otherwise above ASSERT will be
triggered.
For MCC TX SW path, ipa_free_skb() should be called to free skb to
IPA driver.
Change-Id: I039cb20673ce3aa98056529f7609801f76c4c16a
CRs-Fixed: 2247339
qdf_wait_for_event_completion() needs a timeout value in milliseconds.
msecs_to_jiffies() is not needed to convert timeout value into jiffies.
Change-Id: I95315f937d651fd200f58d89f44eb167c6f29cc8
CRs-Fixed: 2250143
IPA driver adds unified WDI API for ipa_wdi_create_smmu_mapping
and ipa_wdi_release_smmu_mapping. WLAN driver needs to adopt the
change accordingly.
Change-Id: I997aae3651831d0ecf576369fdb428c0f59be77b
CRs-Fixed: 2230075
Previously change "qcacld-3.0: Use enum QDF_OPMODE", Change-Id
Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f, replaced all instances of
tQDF_ADAPTER_MODE to QDF_OPMODE in the qcacld-3.0 project. However
since tQDF_ADAPTER_MODE was originally defined in a common project,
and not all references to it could be immediately removed, a legacy
definition was left with the expectation that it would be removed when
all references to it had been updated. Unfortunately new instances of
using tQDF_ADAPTER_MODE have been subsequently added to the project,
so replace them with QDF_OPMODE.
Change-Id: I71cead84151cc0411f7cc5cc13a87a281e7502c0
CRs-Fixed: 2245247
DISA head files include lots of not used public head files, and cause
compilation issue when disable PMO feature flag.
Change-Id: I287f845a3e9f923d042463c34abaedadb905d3b2
CRs-Fixed: 2243947
Currently in functions to show IPA resource info and IPA stats
there are information related to IPA resources memory address.
This may be lead to potential information leak to the location
of IPA resources. Remove the addresses information from the
logs in res info and stats function.
Change-Id: I75d756211c8aaaea300fb207e40a08f5b1ca81e3
CRs-Fixed: 2225361
IPA RM is not used when WDI_UNIFIED_API is defined.
Remove to use wake_lock and rm_lock, which are created from RM setup.
Change-Id: I6c614fde7d6d7f0ab94aa9933578f3dca814a40e
CRs-Fixed: 2231424
Use QDF_IPA_WLAN_EVENT_MAX instead of IPA_WLAN_EVENT_MAX to record
WLAN event to IPA.
Also record QDF_SWITCH_TO_MCC/SCC and QDF_WDI_ENABLE/DISABLE event.
Change-Id: Iada6c39d2b952f6b9a1690a86c5871d2ca588cd2
CRs-Fixed: 2240425
IPA component needs to discard repetitive start_bss event in
case SAP is on DFS channel. Issue is we checked against
available SAP interface and this will lead to second SAP
interface setup failure.
Fix is to check against same SAP interface to see if it has
already been setup.
Change-Id: I2fc3656f5e1fba39dba14dba137c6202c5ec5af0
CRs-Fixed: 2240368
Use get_wmi_unified_hdl_from_psoc instead of GET_WMI_HDL_FROM_PSOC due
to incompatible return types.
Solve renaming dependencies with common side changes.
Change-Id: Ie84641327d64876877c7d26b63d632c79770a88c
CRs-Fixed: 2203055
The Change-Id: I69c813047ab4b1b129e4fb057d8aacbef5cc9efea
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I2c346a266c2c767dd37b5901d8d671e475449a01
CRs-Fixed: 2233325
Add fallthrough comment in pmo_register_wow_wakeup_events
as per linux checkpatch script. Fallthrough required to set
interface type and to set sta wow bitmask.
Change-Id: I6931371e9a2d4421354c19c12e552c75e50cb798
CRs-Fixed: 2233187
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
The following PMO functions have been identified as having off-by-one
logic errors. Address these errors.
* pmo_register_resume_handler
* pmo_register_suspend_handler
* pmo_unregister_resume_handler
* pmo_suspend_all_components
Change-Id: I6a328fc24ae6a575ef56cf9532133eb666e0dc8c
CRs-Fixed: 2232388
Add Unified WDI API support for ol_txrx_ipa_set_perf_level and fix
client parameter for ipa_wdi_set_perf_profile.
Change-Id: Ieaaf7cf5231f74cd6ba358c02032ae173d9618f0
CRs-Fixed: 2211504
There's an excessive log for IPA if IPA is disabled on ini but enabled
in FW. Change the log level to debug from info.
Change-Id: I60a49132bc00b06fc0725c7a3f648fa773321f56
CRs-Fixed: 2232196
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: Iaccda7d9e895cdb4610f0ec984add3aeb7ef9926
CRs-Fixed: 2227330
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: I2c88b6af33e8f10f1837263f157c1f6892a2c2fb
CRs-Fixed: 2227326
There's an excessive log for IPA uC stat request reason even when
WDI pipe is suspended.
Enable IPA uC stat request reason log only when IPA pipe is resumed.
Change-Id: I35d98e02a9180738bc9cdb25f59e31d572df9e0e
CRs-Fixed: 2181952
Extend support to get IPA HW status on all platforms if IPA OFFLOAD
feature is enabled.
Change-Id: Ideea6b7f058b3d80efecc9473a20d7a31046b4bc
CRs-Fixed: 2230316
When AP_DISCONNECT event occurs during IPA resource unloading in
progress, timeout could happen since suspending FW IPA Rx pipe took much
time. This could cause a subsequent AP_CONNECT event failed since no
interface is available.
Fix this by
- Adapter struct sanity check using hdd_validate_adapter()
- Call hdd_ipa_cleanup_iface() for AP_DISCONNECT/STA_DISCONNECT event
in loading/unloading timeout case
- Assert when no interface is available in hdd_ipa_setup_iface()
Change-Id: Ie96e4f0e96ccffacf4ce5fcc976636c440214873
CRs-Fixed: 2208347
wdi2.0 feature adds extra 2 bytes to frag_header and thus hdr_len
to IPA HW also adds 2 bytes. This change breaks pre-wdi2.0 platform
with WiFi FW discarding all TX traffic since packet payload is
with an extra 2-byte offset.
Fix is to add frag_header structure with pre-wdi2.0 pattern.
Change-Id: I467a05bab4111a305ae23250c61cecc050821611
CRs-Fixed: 2047714
IPA RM APIs are depricated from WDI UNIFIED APIs.
Remove to call IPA RM APIs when IPA_WDI_UNIFIED_API is enabled.
Change-Id: I4de2f16a9d320a769870efacdd0c067bab133a0a
CRs-Fixed: 2220247
Issue is under AP-AP MCC config, mcc event is not sent from wlan
to IPA driver. mcc mode is decided with the help of connection
table. But for AP mode, mcc mode is checked and updated before
connection table is updated by adding the SAP vdev entry.
Fix is to make ipa mcc mode check and notification when connection
table is updated. Since block is not allowed when conn table is
updated, a new work_struct mcc_work is introduced.
Change-Id: I935222e26bb3f6b31685f52b75084b034daccad2
CRs-Fixed: 2075876
Fix LLVM compilation error: implicit conversion from enumeration type
'qdf_ipa_wlan_event' to different enumeration type
'qdf_ipa_wlan_event_t'
Change-Id: Ie5f09f3e5b6f1e93d344d22483754292d370ce60
CRs-Fixed: 2216820
Historically, recovery was triggered if PDEV suspend failed, but the
logic was lost during componentization. Restore the previous logic of
triggering recovery on PDEV suspend timeout.
Change-Id: I6e193e98c5ef45fd7ab4b6595ea85d986fa84131
CRs-Fixed: 2215588
Check if IPA is enabled in ini configuration before doing
IPA operations from northbound interface calls.
Change-Id: Ic075562c1afe52d26ebefaff058fde7c90d4f7d1
CRs-Fixed: 2215269
When IPA RM resources are not granted immediately, IPA
WDI pipes activation is deferred and activated from the
RM notify callback when resources are granted. In this
case after pipe activation resource loading flag is not
set to true. As a result when IPA wants to access the WLAN
resource driver sends wrong status as resource loading in
progress. So reset the flag when IPA WDI pipes activation
is deferred and activated from rm notification handler.
Change-Id: Ia336181f0471a9a8d6c853aefa19a23102077222
CRS-Fixed: 2198206
Currently SAP vdev id is passed for STA IPA RX offload when DUT
connects first to an AP and later hotspot is turned on. In this
fix pass sta vdev id for STA IPA RX offload command to FW during
sap client connect and disconnect events.
Change-Id: Id73b837a8efd1840f3ca0cba8e4ebda82cdd7fc7
CRs-Fixed: 2211896
For unified WDI IPA rm resource manager is not initialized. Do not
call set perf level for ipa rm resources.
Change-Id: Icf9e50b4cbe8e3d1eeedd9428d48e1889339fe13
CRs-Fixed: 2210736
IPA module has been moved to CLD component under the converged
driver model. Move the legacy HDD IPA SMMU functions to the
IPA component.
Change-Id: I3ac5ebe87cc48913f3e8e075e60737e78664f861
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy HDD IPA WLAN event handler to
the IPA component.
Change-Id: Ia53adce7ef29eea747f288fa074f96a84e47925d
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy HDD IPA FW OP event handler to
the IPA component.
Change-Id: Idecf12c33a5b4ab80de50626029ff43b5f9336a2
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA UC offload initialization to
the IPA component.
Change-Id: I221a11e7f8aa2459918f87c6b043d4682e05cb04
CRs-Fixed: 2177925
As part of converged driver model remove IPA from
HDD and create a new IPA CLD component. Remove the
legacy code from the HDD.
Change-Id: Id4691e0f490c2f9bd9ccc8d5225be32002a5df9e
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA stats and debug info APIs to
the IPA component.
Change-Id: Ieb68a1579986c835f66c84e5e3b7aa2a4004383d
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA set perf level APIs to the IPA
component.
Change-Id: Idbbab9cc6885b6acf1cd40d432a236f0629c8dff
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA RM APIs to the IPA component.
Change-Id: Iaff12ae3cec9ee6ff20543579692385c9a555613
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA setup and initialization code
to the IPA component.
Change-Id: I63717eb2601c569131c6642f7330e4182e604424
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Remove legacy WMA interface IPA command and use
the new defined API.
Change-Id: Icd9a207f43f8df4dc563d0078d402470683cfd7d
CRs-Fixed: 2177925
As part of converged driver model remove IPA from
HDD and create a new IPA CLD component. Add files for
IPA core, dispatcher and target_if. Define IPA related
public and private structures.
Change-Id: I8848331edc7dd878f9fc51ef9f5e311ad91ed70b
CRs-Fixed: 2177925
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers to support compiling out entire levels of
logging messages. Migrate the PMO logging wrappers to consumer these
new APIs instead of QDF_TRACE.
Change-Id: I3f46450e76cc6422a0877e95785bfd41e4c0af0c
CRs-Fixed: 2208536
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers. Instead of using QDF_TRACE_RATE_LIMITED
directly, use the level-specific versions.
Change-Id: I21b47f443ae53d1780fd21e352f69b0ea48ae726
CRs-Fixed: 2208563
QDF_TRACE_RATE_LIMITED recently lost its 'rate' parameter in
I31a3f48f68fb6bc67f59f3157a635345943d3331. Update call sites to account
for this change.
Change-Id: I301a36a445be4ecc3e1d24e007d7ca6f05898fc5
CRs-Fixed: 2205796
In order to better align with the other PMO logging wrappers, and the
rest of the driver, rename the following macros:
* PMO_ENTER -> pmo_enter
* PMO_EXIT -> pmo_exit
Change-Id: I9186c1425f22c5a8d4fc98f048a9d487b6095797
CRs-Fixed: 2206650
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2
num_packet_filter = Packet Filter enabled ? 12 : 0xffffffff
Change-Id: Ie8cb4ae44c83b115b249e22ebd7146278ed70612
CRs-Fixed: 2199297
Building CLD3.2 with a performance configuration results in several
"potentially uninitialized" warnings. Initialize the relevant variables
to avoid the warnings.
Change-Id: I6a4324cb313dfb9d3b4c82294bc2fc8ce357fd0b
CRs-Fixed: 2202533
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
Building CLD3.2 with a performance configuration results in several
"potentially uninitialized" warnings. Initialize the relevant variables
to avoid the warnings.
Change-Id: If97b67d50ebe2b7465fd2cc5a6a44488e4cb25a7
CRs-Fixed: 2200294
Provide PMO-specific device capabilities to PMO. This allows PMO to do
intersections between configuration and device capabilities.
Change-Id: If0a199f9be466d16cef900a29b14b73a2a4e52d0
CRs-Fixed: 2197828
pmo_core_wow_enter(), pmo_core_wow_exit() and struct
pmo_wow_enter_params are all dead code. Remove them.
Change-Id: I254a0bad794ffc1170a2799918e1627a3e01e340
CRs-Fixed: 2199462
It is really common to want to update or read from the PMO private
context, but doing so requires several lines boilerplate code. Because
this boilerplate is in so many places, mistakes like using the wrong
lock operation, or forgetting to use locks at all, are a always a
danger. Add pmo_psoc_with_ctx() to address this deficiency, which
retrieves the private context pointer, locks on entry, and unlocks on
exit. Usage is like so:
struct pmo_psoc_prov_obj *psoc_ctx;
pmo_psoc_with_ctx(psoc, psoc_ctx) {
/* use psoc_ctx */
}
Which is equivalent to:
struct pmo_psoc_prov_obj *psoc_ctx;
psoc_ctx = pmo_psoc_get_priv(psoc);
qdf_spin_lock_bh(&psoc_ctx->lock);
/* use psoc_ctx */
qdf_spin_unlock_bh(&psoc_ctx->lock);
Change-Id: I6a3ccbfbfb57c589d44c7eae57e2ed8272dae3ee
CRs-Fixed: 2197722
Under unregistering of PMO handlers, incoming component id is sanity
checked. In the logic, WLAN_UMAC_MAX_COMPONENTS as id will not cause
failure even though it is an id beyond the acceptable bound.
Correct the logic so that WLAN_UMAC_MAX_COMPONENTS ends up in failure.
Change-Id: I6935f34c6d91a4217c3f7f73cd5539af2741ed2b
CRs-Fixed: 2091831
In function pmo_core_send_lphb_enable check index before accessing array.
In function pmo_core_is_wow_applicable initialize vaiable before access.
Change-Id: Iadba3175d10da3e4e311d8ab9e8a850053d3da24
CRs-Fixed: 2162257
Add final changes of DISA component into the skeleton. Fill up all the
code in core, dispatcher and target_if of the DISA component. Use new
wmi API to extract cmd response from event buffer.
Change-Id: I55f7170efa1055f1449dd95d9f1a911dfa6b54ce
CRs-Fixed: 2161979
Create a skeleton for the DISA component. This is a CLD
component. Add files for disa core, dispatcher and
target_if. Define DISA related public structures and
objmgr objects. Add API's as stubs.
Change-Id: I63b32a0e7da0283d091815aaccea6b8703f5184c
CRs-Fixed: 2159579
Rename pmo_ucfg_* API to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I59491eff038709a883efb527168159a7e9e2ba2a
CRs-Fixed: 2145088
Measurement pilot public action frame (Action Id = 7) is not
handled in the driver, if the AP is sending this action frame
it ends up waking up the APPS and burn battery.
Since anyway host is not handling this action frame, configure
the firmware to drop this action frame.
Change-Id: I15327f9af8cccaa7324e4e39f1e6336225740b75
CRs-Fixed: 2146506
Send WOW timer pattern to firmware when suspend is requested and
INSTALL_KEY is not sent to firmware yet. This will allow firmware
to wake host in case Eapol frames are not received and do a graceful
disconnect.
Change-Id: Ibbcc0af85ee9ddcd7f6559c83c67274508193004
CRs-Fixed: 2127634
Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: Ia2107ff6939666b4a0bd19d57149d17814f2dfb5
CRs-Fixed: 2070426
With current implementation in case of an SSR/PDR threads that are
waiting on events will only get purged after the wait timeout has
occurred, increasing the recovery time for the driver. Utilize new
APIs that maintain a list of events. In case of an SSR/PDR
forcefully set these events.
Change-Id: I83b4f576a65f8da5762288ac8dfccdef7d05d82a
CRs-Fixed: 2045156
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141065
Rename pmo_ucfg_* APIs to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I9fba71ee5d5cf6428f043c7d7782ef585951e059
CRs-Fixed: 2140474
Rename pmo_ucfg_is_vdev_connected to ucfg_pmo_is_vdev_connected
to match existing naming convention for component ucfg APIs.
Change-Id: Idd04103664135f226881b07263365d70df5790e0
CRs-Fixed: 2135888
Rename pmo_ucfg_is_ap_mode_supports_arp_ns to ucfg_pmo_*
to match existing naming convention for component ucfg APIs.
Change-Id: I6877e1ebbc8a89d9b2cfb08f7af46e3f3b6606f3
CRs-Fixed: 2135193
PMO resume timeout is 25 seconds which is too large
hence reduce PMO resume timeout to 6 seconds.
Change-Id: I9f29e136bc091ddd3ae2ca38a495edcbff6c1cb8
CRs-Fixed: 2128481
Checkpatch reported multiple instances of block comments not aligning
on "*" so fix them.
Change-Id: I082f62f59fe16d84ba013adbbfcd2e9bf1985e3c
CRs-Fixed: 2122901
This is a qcacld-2.0 to qcacld-3.0 propagation.
If the device connects to 11k enabled AP and enter WoW mode, then
the AP is keep sending RRM beacon reports (Action frames) which are
waking up the APPS and leading to battery drain.
The fix is to configure the firmware to not to wake up APPS
for RRM action frame.
Change-Id: I2368be4f641b8b8684a458daea52a81fa671200b
CRs-Fixed: 1115560
Add support for WMI_SET_MULTIPLE_MCAST_FILTER_CMDID command
that can add/delete multiple mcast filters.
CRs-Fixed: 2096595
Change-Id: I3dc93c603a5a6676d97b5911a716277c7bef0ef8
Update ini param g_auto_detect_power_failure_mode to incorporate below
values,
0 - Don't register wow wakeup event and FW crashes on power failure
1 - Register wow wakeup event and FW sends failure event to host on
power failure
2 - Don't register wow wakeup event and FW silently rejuvenate on
power failure
3 - Don't register wow wakeup event and the auto power failure detect
feature is disabled in FW.
Change-Id: I8a704954ecbacadbc035c1523fa41a18b6300f66
CRs-Fixed: 2087144
Add new kek_len param used for FILS in the pmo_gtk_req structure under
PMO GTK public structures
Change-Id: I4fc25026d9fc004f267b9461d1671f8b1ac57f53
CRs-Fixed: 2081252
Info level logs are logged on console, hence change PMO
logs in wlan_pmo_suspend_resume.c to debug log level to avoid
excessive console logging.
Change-Id: Ie9852ef5ea8fefaa33a82f0b287224271ada003b
CRs-Fixed: 2121361
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_gtk.c to debug log level to avoid excessive console
logging.
Change-Id: I3aa1eef2476827157adfa51e37b0054b10ba58c1
CRs-Fixed: 2118712
The Wow pattern id should be identified unique for different vdevs of
legacy firmware, and latest firmware accept same Wow pattern id on
different vdevs.
This change is to differentiate this behavior using
WMI_SERVICE_UNIFIED_WOW_CAPABILITY flag, and supply a set of APIs to
manipulate pattern id.
Change-Id: I5fe7623a309a0c3baa14fb7312107c057e994462
CRs-Fixed: 2103017
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_tgt_gtk.c to debug log level to avoid excessive console
logging.
Change-Id: I8f19e8651927a7c3cae9ee1e1118f983c063b3ed
CRs-Fixed: 2116340
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_ns.c to debug log level to avoid excessive console logging.
Change-Id: I60620f6a3ce4fe708f026a554a5295c1f708f485
CRs-Fixed: 2116335
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_arp.c to debug log level to avoid excessive console logging.
Change-Id: I4eef5203f612b3ddaace30d4da43c13103dd60c7
CRs-Fixed: 2116328
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_suspend_resume.h to debug log level to avoid excessive
console logging.
Change-Id: I77edb26ce3eb61573bba830787fe0ffb32eb6281
CRs-Fixed: 2116321
Info level logs are logged on console, hence change PMO
logs in wlan_pmo_main.c to debug log level to avoid excessive
console logging.
Change-Id: I1f3c00537ce850079a06aaf479bdb917e7ea55e2
CRs-Fixed: 2116314
Enable rx of NDP data packets in WOW mode by enabling
WOW_PATTERN_MATCH_EVENT for NDI vdev.
Change-Id: I4d5edfc91c23fd8cc277c005da7803690b5fe054
CRs-Fixed: 2069493
Currently, host driver sets bitmap of allowed action frames to fw.
For a particular action category, there are certain action id
frames which are not processed. This causes host wakeup and leads
to power drain.
Set action id along with action category to fw for action frames
to be allowed to host driver.
Change-Id: Ifa0b40b290fcabb9ce5e48f69bd462aebb9017ac
CRs-Fixed: 2072123
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
In the suspend path, the code waits for all active/pending scans to be
cancelled before continuing the suspend. Instead, for better power
savings, abort all active/pending scans during suspend and immediately
continue the suspend process.
Change-Id: I16a5429c00034fe58fb4c70a8dacda666ac54227
CRs-Fixed: 2073229
