Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2354496
In case of TSO, same skb results in multiple tx_desc after
segmentation. To avoid multiple free of skb "skb->users"
count is used. Currently, race condition is observed while
incrementing "skb->users" count in ol_tx_ll_fast and before
that, tx_completion is received for all the segments which
are sent before. In this case, "skb->users" count will be 1
so, skb is removed from the skb debug node which leads double
free of skb when tx completion is received for the last segment.
To fix this, increment the "skb->users" count before sending
first segment and decrement only iwhen the last segment.
Change-Id: I26000fcda8715b737cac803ec8e64c0fb640dfe4
CRs-Fixed: 2582617
Firmware peer state needs to be set to AUTHORIZE only after
completing the 4 way handshake. In failure scenario,
host configured AUTHORIZE state before 4 way handshake and
it triggered assert in the firmware.
Peer state moved to connection in progress/CONN after successful
association and AUTH state after successful 4way handshake.
Change-Id: I5e3d94843443d0fc2612a918b5c14479f91914d8
CRs-Fixed: 2580929
The host driver checks the peer PMF capability
before adding MBO IE. But for open authentication
AP, the peer will not advertise PMF capability.
So while connecting to open mode AP, the MBO IE
doesn't get added in the association request frames.
Check if the authentication algorithm is open.
If the authentication algorithm is open don't
check for peer pmf capability to add MBO IE.
Change-Id: Ieae85ce696a40234535388a548906dc9521b19a0
CRs-Fixed: 2584527
In 11D scan procedure if WMI_11D_NEW_COUNTRY_EVENTID event is
received, host processes 11d new country code event.
Host driver as a response sends WMI_SCAN_CHAN_LIST_CMDID
new channel list cmd to firmware.
As a result the ongoing scan procedure is aborted by firmware,
and if the scan was a first scan for connection, then it would
lead to connection latency as the supplicant then have to
scan again.
Fix is to check if any scan is in progress, then delay
WMI_SCAN_CHAN_LIST_CMDID channel list command to FW till
the current scan is complete.
Change-Id: I4e747bb747c32430b5d8024823aa0df4928a8c71
CRs-Fixed: 2569741
With Vdev delete not using serialization, no need to disconnect
any STA with connection in progress.
The logic was added to remove the active connect command from
serialization queue so that vdev delete can complete before hdd
time out.
Now as vdev delete is not using the serialization remove this.
Change-Id: Id8c5ab31e54c8cf26999aff58c0773213f0cb13a
CRs-Fixed: 2585753
Remove wlan_reg_freq_to_chan within function
csr_update_op_class_array and use channel frequencies
directly to retrieve opclass.
To utilize the new channel frequency function,
regional opclass table will be used unconditionally,
given no OTA packets' country IEs will be populated
here(and thus no need to carry global opclass).
Change-Id: Ida9831e7e74223455089770744222185ae3cb1d3
CRs-Fixed: 2576285
Update driver to check SAP client acceptance as per MAC ACL policy
to control association.
Change-Id: Id6888b87393e79e2f86a7d5b1132c4a897179a23
CRs-fixed: 2583874
Add credit tracking for HL Data Path in DPTRACE.
Also update proto_bitmap to dynamically enable/disable
credit tracking.
Change-Id: Idd9216b634586f3a81c2194ea4bd2122a472154a
CRs-Fixed: 2574053
Currently, default MGMT retry limit is 4 which means 4
transmissions are supported for any management frame.
In noisy environment, Chances to get connection failure
are higher with 4 retransmissions.
Fix is to add INI support mgmt_retry_max to make
CFG_MGMT_RETRY_MAX configurable. Default value for
CFG_MGMT_RETRY_MAX is 15 to reduce the chances of connection
failure in noisy environment.
Change-Id: Id50cb68813fba517a8a1580a3d6662c73b0a381e
CRs-Fixed: 2575385
When NUD FAILED event is sent by kernel, driver checks if this event
needs to be honored or not. If there is any active traffic, driver
will not honor NUD FAILED event and won't issue disconnect.
Currently, when NUD FAILED event is not honored, driver NUD state is
updated to NUD_NONE. This won't allow the further NUD FAILED event
processing in driver if received without NUD PROBE/NUD INCOMPLETE.
Reset the driver NUD state machine when NUD FAILED event
is not honored and restart NUD tracking.
Change-Id: I46826fdf60fc2f3543567c09ddc8574f119efd38
CRs-Fixed: 2583096
Currently in case of LTE-coex event, the driver restarts
the SAP to a new channel if the current SAP operating
channel is unsafe.
In the current logic the driver gets the PCL apply the
logic to remove unsafe channels, NOL channels etc.
and then chose a final channel for the SAP.
Now for the case of standlaone SAP the PCL would contain
only 5ghz channels, and it may be the case that ACS
channel list contains only 2.4ghz channels because
the SAP was initially started on 2.4ghz band.
Now with the intersection of 2.4ghz and 5ghz, the driver
would not get anything left to restart the SAP and the SAP
restart would eventually fail.
Fix is to directly check the number of connections as 1,
that would mean only SAP is present, and if it is the
case, just restart the SAP on any other channel from the
ACS channel list rather than intersection with PCL.
Change-Id: If3a77ca877b2bf5e83ca64930e716936f680940f
CRs-Fixed: 2556054
While processing BEACON_REPORTING_ACTIVE_REPORTING vendor command
on a particular STA (say its vdevid == 0), If scan started on any
interfaces (for example, on same STA (with vdev id == 0) or P2P
(with vdev id == 1) or on second STA (with vdev id == 1) of
STA + STA), Host should send a pause indication to upper layer only
for the vdev id(s) (here vdev id == 0) on which host processing
BEACON_REPORTING vendor command comes from user space.
Add sanity check to make sure that HOST should send pause
indication to upper layer only for vdev of STA for which host
processing BEACON_REPORTING vendor command at the moment.
Change-Id: I5ed5dc42e4dded2a803349d75234b84d3aa7f314
CRs-Fixed: 2582389
Currently the driver in case of force SCC picks up
2.4ghz SCC channel if any other STA/AP is already
up on that channel, so in the process of shifting
in the API sap_validate_channel it picks up 2.4ghz
and calls a reg API to set the freq related params
to it. Now since the frequency for 2.4ghz is 40 mhz
capable the max BW supported for 2.4ghz becomes 40 and
the driver starts the SAP on 40mhz.
Now since the OBSS scan is offloaded to the hostpad
and now since it was driver which started the SAP
on 40mhz there is no mechanism to start OBSS scan
from driver, which leads to channel blockage if
any legacy 11g, 11b lient is operating on the channel.
Fix is to lower down the BW to 20Mhz if the SAP does a
force SCC in 2.4ghz.
Change-Id: I0d85dfb5e9e8332957d853173063e77d18ea600c
CRs-Fixed: 2581495
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
In wma_rx_invalid_peer_ind driver store the i_addr1(ra) in invalid
peer list, which is the self address.
To fix store i_addr2(ta), which is the actual peer address,
in invalid peer list.
Change-Id: I6ff035f3155e611d867778ea56bfdbe8ed3302c8
CRs-Fixed: 2583502
In 6GHz BSS, the VHT and HT IE are not present and only
HE IE is present. Driver needs to update ch_width to peer
struct based on HE IE if vht and HT is not supported.
Change-Id: Ib48dc63f972cfc040b40c3dbf53a4c46f9e95eee
CRs-Fixed: 2583249
Currently the driver does not set weight calculated flag
in the spectrum channel structure for each channel as
true in 40, 80, 160 sorting case.
Now in the next iteration the weight calculation done
comes as false, and the weight is set as maximum
which leads to wrong channel and BW selection and the
last while running channel selection logic.
Fix is to set weight calculation done as true for all
the channels which come under the particular BW, and
skip the channels for which the weights are already
calculated.
Change-Id: Ib355dd5cf7c3aeeb5534bfa295785bdfc30eed86
CRs-Fixed: 2583538
Currently cdp_host_get_vdev_stats API provided
with vdev handle as its arguments, which is
directly accessed in that API. This can cause
a race-condition in access of the respective
handle if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the vdev_id which will be used to get the
respective handles and hence avoiding unwanted
access of the handle if it has been deleted.
Change-Id: I4cc959b9244f5c22dea71194c86c583cd9c2a071
CRs-Fixed: 2583358
Supplicant delivers the HANG event via HIDL for STA
and via a legacy socket interface for SAP standalone case.
As per current supplicant implementation, wdev_id only matters
when the HANG event gets processed via HIDL.
Currently, for STA interface, host sends wdev as NULL to
cfg80211_vendor_event_alloc, this allows userspace to
process nl_cmd for QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX
event with the 1st interface which is p2p in supplicant instead
of WLAN interface.
Set wdev with the proper value for STA interface to avoid processing
nl_cmd with P2P interface by userspace.
Change-Id: If3c1b2e11daf682a6ef535014738f4b2a2b5d009
CRs-Fixed: 2580359
Currently the driver caches the command which comes
for PS enable/disable and if the user disables the
command the API sme_ps_enable_disable cannot go
forward to enable/disable the command because
of the check for last user command cache to be disabled
or not.
Fix is to cache the command after the disable has
been sent to FW to avoid the scenario where the command
is not sent by host as the check to send the command failed.
Change-Id: Ibff459fa03aceaf6963735d22d30c54a488751f4
CRs-Fixed: 2582410
