Commit Graph

9 Commits

Author SHA1 Message Date
Jeremy Fitzhardinge
eefb47f6a1 xen: use spin_lock_nest_lock when pinning a pagetable
When pinning/unpinning a pagetable with split pte locks, we can end up
holding multiple pte locks at once (we need to hold the locks while
there's a pending batched hypercall affecting the pte page).  Because
all the pte locks are in the same lock class, lockdep thinks that
we're potentially taking a lock recursively.

This warning is spurious because we always take the pte locks while
holding mm->page_table_lock.  lockdep now has spin_lock_nest_lock to
express this kind of dominant lock use, so use it here so that lockdep
knows what's going on.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-09 14:25:19 +02:00
Jeremy Fitzhardinge
d6182fbf04 xen64: allocate and manage user pagetables
Because the x86_64 architecture does not enforce segment limits, Xen
cannot protect itself with them as it does in 32-bit mode.  Therefore,
to protect itself, it runs the guest kernel in ring 3.  Since it also
runs the guest userspace in ring3, the guest kernel must maintain a
second pagetable for its userspace, which does not map kernel space.
Naturally, the guest kernel pagetables map both kernel and userspace.

The userspace pagetable is attached to the corresponding kernel
pagetable via the pgd's page->private field.  It is allocated and
freed at the same time as the kernel pgd via the
paravirt_pgd_alloc/free hooks.

Fortunately, the user pagetable is almost entirely shared with the
kernel pagetable; the only difference is the pgd page itself.  set_pgd
will populate all entries in the kernel pagetable, and also set the
corresponding user pgd entry if the address is less than
STACK_TOP_MAX.

The user pagetable must be pinned and unpinned with the kernel one,
but because the pagetables are aliased, pgd_walk() only needs to be
called on the kernel pagetable.  The user pgd page is then
pinned/unpinned along with the kernel pgd page.

xen_write_cr3 must write both the kernel and user cr3s.

The init_mm.pgd pagetable never has a user pagetable allocated for it,
because it can never be used while running usermode.

One awkward area is that early in boot the page structures are not
available.  No user pagetable can exist at that point, but it
complicates the logic to avoid looking at the page structure.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 11:05:38 +02:00
Jeremy Fitzhardinge
f6e587325b xen64: add extra pv_mmu_ops
We need extra pv_mmu_ops for 64-bit, to deal with the extra level of
pagetable.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:57:16 +02:00
Jeremy Fitzhardinge
48b5db2062 xen64: define asm/xen/interface for 64-bit
Copy 64-bit definitions of various interface structures into place.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:56:18 +02:00
Jeremy Fitzhardinge
e57778a1e3 xen: implement ptep_modify_prot_start/commit
Xen has a pte update function which will update a pte while preserving
its accessed and dirty bits.  This means that ptep_modify_prot_start() can be
implemented as a simple read of the pte value.  The hardware may
update the pte in the meantime, but ptep_modify_prot_commit() updates it while
preserving any changes that may have happened in the meantime.

The updates in ptep_modify_prot_commit() are batched if we're currently in lazy
mmu mode.

The mmu_update hypercall can take a batch of updates to perform, but
this code doesn't make particular use of that feature, in favour of
using generic multicall batching to get them all into the hypervisor.

The net effect of this is that each mprotect pte update turns from two
expensive trap-and-emulate faults into they hypervisor into a single
hypercall whose cost is amortized in a batched multicall.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 15:17:23 +02:00
Jeremy Fitzhardinge
e2426cf85f xen: avoid hypercalls when updating unpinned pud/pmd
When operating on an unpinned pagetable (ie, one under construction or
destruction), it isn't necessary to use a hypercall to update a
pud/pmd entry.  Jan Beulich observed that a similar optimisation
avoided many thousands of hypercalls while doing a kernel build.

One tricky part is that early in the kernel boot there's no page
structure, so we can't check to see if the page is pinned.  In that
case, we just always use the hypercall.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 13:24:40 +02:00
Jeremy Fitzhardinge
3843fc2575 xen: remove support for non-PAE 32-bit
Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used.  xen-unstable has now officially dropped
non-PAE support.  Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22 18:42:49 +02:00
Mark McLoughlin
f64337062c xen: refactor xen_{alloc,release}_{pt,pd}()
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel@lists.xensource.com
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04 18:36:48 +02:00
Thomas Gleixner
9702785a74 i386: move xen
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:51 +02:00