Commit Graph

21 Commits

Author SHA1 Message Date
Russ Anderson
b8de471f37 [IA64] Update printing of feature set bits
Newer Itanium versions have added additional processor feature set
bits.  This patch prints all the implemented feature set bits.  Some
bit descriptions have not been made public.  For those bits, a generic
"Feature set X bit Y" message is printed.  Bits that are not implemented
will no longer be printed.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09 13:05:30 -08:00
Tony Luck
e0cc09e295 Pull error-inject into release branch 2007-04-30 13:55:43 -07:00
Russ Anderson
618b206f0b [IA64] Proper handling of TLB errors from duplicate itr.d dropins
Jack Steiner noticed that duplicate TLB DTC entries do not cause a
linux panic.  See discussion:

http://www.gelato.unsw.edu.au/archives/linux-ia64/0307/6108.html

The current TLB recovery code is recovering from the duplicate itr.d
dropins, masking the underlying problem.  This change modifies
the MCA recovery code to look for the TLB check signature of the
duplicate TLB entry and panic in that case.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-08 09:41:46 -08:00
Uwe Kleine-König
1b3c3714cb Fix typos concerning hierarchy
heirarchical, hierachical -> hierarchical
        heirarchy, hierachy -> hierarchy

Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:23:03 +01:00
Fenghua Yu
1138b7e2d4 [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface
This patch implements pal_mc_error_inject() interface in kernel. Both physical
mode and virtual mode are supported.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-29 15:29:56 -08:00
Venkatesh Pallipadi
17e77b1cc3 [PATCH] Add support for type argument in PAL_GET_PSTATE
PAL_GET_PSTATE accepts a type argument to return different kinds of
frequency information.
Refer: Intel ItaniumArchitecture Software Developer's Manual -
Volume 2: System Architecture, Revision 2.2
(http://developer.intel.com/design/itanium/manuals/245318.htm)

Add the support for type argument and use Instantaneous frequency
in the acpi driver.

Also fix a bug, where in return value of PAL_GET_PSTATE was getting compared
with 'control' bits instead of 'status' bits.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07 11:21:55 -08:00
Russ Anderson
5b4d5681ff [IA64] More Itanium PAL spec updates
Additional updates to conform with Rev 2.2 of Volume 2 of "Intel
Itanium Architecture Software Developer's Manual" (January 2006).

Add pal_bus_features_s bits 52 & 53 (page 2:347)
Add pal_vm_info_2_s field max_purges (page 2:2:451)
Add PAL_GET_HW_POLICY call (page 2:381)
Add PAL_SET_HW_POLICY call (page 2:439)

Sample output before:
---------------------------------------------------------------------
cobra:~ # cat /proc/pal/cpu0/vm_info
Physical Address Space         : 50 bits
Virtual Address Space          : 61 bits
Protection Key Registers(PKR)  : 16
Implemented bits in PKR.key    : 24
Hash Tag ID                    : 0x2
Size of RR.rid                 : 24
Supported memory attributes    : WB, UC, UCE, WC, NaTPage
---------------------------------------------------------------------

Sample output after:
---------------------------------------------------------------------
cobra:~ # cat /proc/pal/cpu0/vm_info
Physical Address Space         : 50 bits
Virtual Address Space          : 61 bits
Protection Key Registers(PKR)  : 16
Implemented bits in PKR.key    : 24
Hash Tag ID                    : 0x2
Max Purges                     : 1
Size of RR.rid                 : 24
Supported memory attributes    : WB, UC, UCE, WC, NaTPage
---------------------------------------------------------------------

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07 11:10:16 -08:00
Russ Anderson
6533bdedac [IA64] Add se bit to Processor State Parameter structure
Rev 2.2 of Volume 2 of "Intel Itanium Architecture Software Developer's
Manual" (January 2006) adds a se bit to the Processor State Parameter
fields (pages 2:299).  This patch gets the structs back in sync
with the spec.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07 11:02:53 -08:00
Russ Anderson
323cbb0991 [IA64] Add dp bit to cache and bus check structs
Rev 2.2 of Volume 2 of "Intel Itanium Architecture Software Developer's
Manual" (January 2006) adds a dp bit to the cache_check and bus_check
fields (pages 2:401-2:404).  This patch gets the structs back in sync
with the spec.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07 11:02:38 -08:00
Bjorn Helgaas
c12fb18857 [IA64] remove unused PAL_CALL_IC_OFF
Linux maps PAL instructions with an ITR, but uses a DTC for PAL data.
Section 11.10.2.1.3, "Making PAL Procedures Calls in Physical or Virtual
Mode," of the SDM (rev 2.2), says we must therefore make all PAL calls
with PSR.ic = 1 so that Linux can handle any TLB faults.

PAL_CALL_IC_OFF is currently unused, and as long as we use the ITR + DTC
strategy, we can't use it.  So remove it.  I also removed the code in
ia64_pal_call_static() that conditionally cleared PSR.ic.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-10-17 14:53:52 -07:00
Russ Anderson
b29e7132b5 [IA64] PAL calls need physical mode, stacked
PAL_CACHE_READ and PAL_CACHE_WRITE need to be called in physical
mode with stacked registers.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-09-26 15:21:11 -07:00
Tony Luck
ae3e021862 Pull model-name into release branch 2006-09-26 09:47:04 -07:00
Matthew Wilcox
1bf1eba74e [IA64] Format /proc/pal/*/version_info correctly
/proc/pal/*/version_info is a bit confusing.  HP firmware, at least,
reports 07.31 instead of 0.7.31.  Also, the comment is out of place;
it's an internal detail about the implementation of ia64_pal_version.
Since the 2.2 revision of the SDM still states that PAL_VERSION can
be called in virtual mode, correct the comment to be more accurate.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-07-31 11:49:13 -07:00
Tony Luck
76d08bb3f0 [IA64] Add "model name" to /proc/cpuinfo
Linux ia64 port tried to decode the processor family number
to something human-readable, but Intel brandnames don't change
synchronously with updates to the family number.  Adopt a more
i386-like approach and just print the family number in decimal.
Add a new field "model name" that uses PAL_BRAND_INFO to find
the official name for the cpu, or on older systems, falls back
to using the well-known codenames (Merced, McKinley, Madison).

Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-05 13:54:14 -07:00
Tony Luck
2ab9391dea [IA64] Avoid "u64 foo : 32;" for gcc3 vs. gcc4 compatibility
gcc3 thinks that a 32-bit field of a u64 type is itself a u64, so
should be printed with "%ld".  gcc4 thinks it needs just "%d".
Make both versions happy by avoiding this construct.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-31 10:28:29 -08:00
Zhang, Yanmin
f19180056e [IA64] Export cpu cache info by sysfs
The patch exports 8 attributes of cpu cache info under
/sys/devices/system/cpu/cpuX/cache/indexX:
1) level
2) type
3) coherency_line_size
4) ways_of_associativity
5) size
6) shared_cpu_map
7) attributes
8) number_of_sets: number_of_sets=size/ways_of_associativity/coherency_line_size.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-30 17:14:12 -08:00
Fenghua Yu
4129a953ad [IA64] New IA64 core/thread detection patch
IPF SDM 2.2 changes definition of PAL_LOGICAL_TO_PHYSICAL to add
proc_number=-1 to get core/thread mapping info on the running processer.

Based on this change, we had better to update existing core/thread
detection in IA64 kernel correspondingly. The attached patch implements
this change. It simplifies detection code and eliminates potential race
condition. It also runs a bit faster and has better scalability especially
when cores and threads number grows up in one package.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-24 13:15:23 -08:00
Xu, Anthony
f15ac5801f [IA64] pal cache flush patch
Because PAL spec has changed since 2002, you can goto
http://developer.intel.com/design/itanium/manuals/iiasdmanual.htm to
download new SDM, all PAL calls should be invoked with psr.ic=1, and
it's caller's responsibility to handle possible tlb miss.
Ia64_pal_cache_flush was written according to old spec, it is obsolete,
and this patch has ia64_pal_cache_flush conform to new spec.

Signed-off-by Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-16 15:44:53 -08:00
Venkatesh Pallipadi
4db8699bcf [IA64] Add ACPI based P-state support
Patch to support P-state transitions on ia64. This driver is based on ACPI,
and uses the ACPI processor driver interface to find out the P-state support
information for the processor. This driver plugs into generic cpufreq
infrastructure.

Once this driver is loaded successfully, ondemand/userspace governor can be
used to change the CPU frequency dynamically based on load or on request from
userspace process.

Refer :
ACPI specification -
      http://www.acpi.info
P-state related PAL calls -
      http://developer.intel.com/design/itanium/downloads/24869909.pdf

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 15:09:24 -07:00
Suresh Siddha
e927ecb05e [IA64] multi-core/multi-thread identification
Version 3 - rediffed to apply on top of Ashok's hotplug cpu
patch.  /proc/cpuinfo output in step with x86.

This is an updated MC/MT identification patch based on the 
previous discussions on list. 

Add the Multi-core and Multi-threading detection for IPF.
  - Add new core and threading related fields in /proc/cpuinfo.
		Physical id
		Core id
		Thread id
		Siblings
  - setup the cpu_core_map and cpu_sibling_map appropriately
  - Handles Hot plug CPU
 
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Gordon Jin <gordon.jin@intel.com>
Signed-off-by: Rohit Seth <rohit.seth@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25 13:25:06 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00