Commit Graph

21 Commits

Author SHA1 Message Date
Nishanth Aravamudan
9e173c031a [PATCH] ia64: fix-up schedule_timeout() usage
Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:56 -08:00
Linus Torvalds
8a212ab6b8 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-10-28 21:09:26 -07:00
Tony Luck
1e1bb25e97 Pull big-sim-disk into release branch 2005-10-28 14:33:14 -07:00
Tony Luck
c85749e6d1 Pull hp-machvec into release branch 2005-10-28 11:15:25 -07:00
Al Viro
06a544971f [PATCH] gfp_t: dma-mapping (ia64)
... and related annotations for amd64 - swiotlb code is shared, but
prototypes are not.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:47 -07:00
Peter Chubb
b6a7e1ecef [IA64] Allow simulator to use bigger disks
The simscsi code at present overflows an int if it's given a large
disk image.  The attached patch increases the possible size to 128G.
While it's unlikely that anyone will want to use SKI with such a
large drive, the same framework is currently being used for various
virtualisation experiments.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 14:36:55 -07:00
Peter Chubb
83a78d9ba7 [IA64] Fix simscsi for new SCSI midlayer
The sd driver now uses scsi_execute_req() for almost everything.
scsi_execute_req() converts requests into scatterlists.

Fix the HP SCSI disk simulator to understand scatterlists for
more commands.

Without this patch the current kernel will not boot on the simulator
(the disks are always detected as having no sectors, and so cannot be
mounted).

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-22 10:42:39 -07:00
Alex Williamson
0b9afede3d [IA64] more robust zx1/sx1000 machvec support
Machine vector selection has always been a bit of a hack given how
early in system boot it needs to be done.  Services like ACPI namespace
are not available and there are non-trivial problems to moving them to
early boot.  However, there's no reason we can't change to a different
machvec later in boot when the services we need are available.  By
adding a entry point for later initialization of the swiotlb, we can add
an error path for the hpzx1 machevec initialization and fall back to the
DIG machine vector if IOMMU hardware isn't found in the system.  Since
ia64 uses 4GB for zone DMA (no ISA support), it's trivial to allocate a
contiguous range from the slab for bounce buffer usage.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-14 16:22:11 -07:00
Tony Luck
c85b2a5fe2 Pull sim-fixes into release branch 2005-09-11 14:27:15 -07:00
viro@ZenIV.linux.org.uk
e72225d160 [PATCH] bogus #if (simserial)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:34 -07:00
Peter Chubb
dc90e95f31 [IA64] Add PAL_VM_SUMMARY/PAL_MEM_ATTRIB to bootloader for SKI
This patch implements PAL_VM_SUMMARY (and PAL_MEM_ATTRIB for good
measure) and pretends that the simulated machine is a McKinley.

Some extra comments and clean-up by Tony Luck.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 08:32:03 -07:00
Adrian Bunk
38d26b9f57 [IA64] arch/ia64/hp/sim/boot/fw-emu.c: remove egcs workaround
Kernel 2.6 doesn't support egcs, and I didn't find any user of this 
function.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 14:50:37 -07:00
Peter Chubb
a4cce10492 [IA64] Fix simulator boot (for real this time).
Thanks to Stephane, we've now worked out the real cause of the
`Linux  will not boot on simulator' problem.  Turns out it's a stack
overflow because the stack pointer wasn't being initialised properly
in boot_head.S (it was being initialised to the lowest instead of the
highest address of the stack, so the first push started to overwrite
data in the BSS).

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:41:56 -07:00
Tony Luck
62d75f3753 [IA64] backout incorrect fix for simulator boot issue
Earlier fix in 4aec0fb122 just
masked the real problem.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:39:15 -07:00
Ian Wienand
4aec0fb122 [IA64] Simulator bootloader fails with gcc 4
After building a fresh tree with gcc 4 I can't boot the simulator as
the bootloader loader dies with 

loading /home/ianw/kerntest/kerncomp//build/sim_defconfig/vmlinux...
failed to read phdr

After some investigation I believe this is do with differences between
the alignment of variables on the stack between gcc 3 and 4 and the
ski simulator.  If you trace through with the simulator you can see
that the disk_stat structure value returned from the SSC_WAIT_COMPLETION
call seems to be only half loaded.  I guess it doesn't like the alignment
of the input.

Signed-off-by: Ian Wienand <ianw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-18 14:10:41 -07:00
Kenji Kaneshige
3b5cc09033 [IA64] assign_irq_vector() should not panic
Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:30:07 -07:00
David Mosberger-Tang
819c67e69c [IA64] Replace stale KDB-code with useful MAGIC_SYSRQ code in simserial.c
Patch makes it possible to use the "F4" function key to do
magic sysrq in the HP Ski simulator.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:58:29 -07:00
Bjorn Helgaas
e15da40176 [IA64] Recognize HP sx2000 chipset
No functional change, just identify the device nicely:

  -IOC: Unknown (103c:12ec) 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
  +IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000

We used to create fake PCI devices for these chips, but we no longer do that.
So I don't think there's any reason to touch pci_ids.h now.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:25:56 -07:00
Alex Williamson
bb0fc08545 [IA64] use common pxm function
This patch simplifies a couple places where we search for _PXM
values in ACPI namespace.  Thanks,

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:33:18 -07:00
Alex Williamson
5f6602a101 [IA64] sba_iommu bug fixes
This fixes a couple of bugs in the zx1/sx1000 sba_iommu.  These are
all pretty low likelihood of hitting.  The first problem is a simple off
by one, deep in the sba_alloc_range() error path.  Surrounding that was
a lock ordering problem that could have potentially deadlocked with the
order the locks are grabbed in sba_unmap_single().  I moved the resource
locking into sba_search_bitmap() to prevent this.  Finally, there's a
potential race between unmapping pdir entries and marking incoming DMA
pages clean.  If you see any oddities, please let me know, but I've
tested it pretty thoroughly here.  Tony, please apply.  Thanks,

BTW, many of the options in this driver not on by default are becoming
more and more broken.  I'll be working on some patches to clean them
out, but I wanted to get this bug fix out first.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25 13:14:36 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00