Fix mangled APIs sme_configure_ext_wo_w,
sme_process_ready_to_ext_wo_w and
lim_remove_timeout_pbc_sessions which were introduced
while converting the names programmatically.
Change-Id: Ie0a79b476a99bf1be0411dae0542359e7d58141a
CRs-Fixed: 882962
qcacld-2.0 to qcacld-3.0 propagation
Current implementation defers all the received frames
when ADD TS request is sent out over the air. This,
in addition, to check for pMac->lim.gLimAddtsSent
incurs delay, till ADD TS response timeout, in processing
of the ADD TS response received if SET_LIM_PROCESS_DEFD_MESGS
is set to FALSE. As there is no rationale defer processing
of Rx frames while waiting for ADDTS response, changes are
made to not defer processing of RX frames for the same.
Change-Id: I1d1a41a0e3555ae19548a0cabf3b9569af775f72
CRs-Fixed: 839546
qcacld-2.0 to qcacld-3.0 propagation
Default value of Tx beamformee is 0.
As as part of fix, enable the default value
of Tx beamformee.
Change-Id: Ib4b30f2a925e95cd96cc789ac7bc223274fa6a67
CRs-Fixed: 921834
qcacld-2.0 to qcacld-3.0 propagation
Add support to parse operating class from xcsa frame and select
channel bandwidth on basis of new operating class.
Change-Id: I33d794e77220ef82cca793767d459979eb940669
CRs-Fixed: 942104
qcacld-2.0 to qcacld-3.0 propagation
If deauth is received just after Assoc rsp from AP in addSTA
response Re/assoc confirm is sent with status failure.
But protStatusCode in assoc confirm is not updated and thus the
pRoamInfo->reasonCode may have garbage value.
In case of Wep connection failure reason code,
pRoamInfo->reasonCode, is sent to the supplicant in connect
result. Now if pRoamInfo->reasonCode is 0 supplicant receives
connection success though connection have actually failed.
To avoid this update protStatusCode, before sending Re/assoc
failure.
Also properly derive if connection is WEP from roamProfile before
clearing it.
CRs-Fixed: 926572
Change-Id: I5ae0832d37746be16696f521bddd5b67307b1ee4
qcacld-2.0 to qcacld-3.0 propagation
Add support in driver for a new vendor command to get
the link properties nss, rate flags and operating
frequency.
Change-Id: Ie3b8d5b2c3886055d303441c5d8b2f2a0a2719bd
CRs-Fixed: 834199
qcacld-2.0 to qcacld-3.0 propagation
PE generated disassoc request is not serialized in SME queue. This
results in corrupting 'lim.limDisassocDeauthCnfReq.pMlmDisassocReq'
which is a global context to save disassoc request.
Address the above by indicating all the PE generated disassoc requests
to SME and process disconnection request only after receiving
eWNI_SME_DISASSOC_CNF from SME(similar to that of processing disassoc
request from peer).
Change-Id: I2b93925ba64c4d9ff22b071dd2e5c7681be59e15
CRs-Fixed: 934183
qcacld-2.0 to qcacld-3.0 propagation.
Too many log prints are seen if mtrace are dumped and this cause
WD bark.
To avoid this lower the log level of mtrace to Info.
Change-Id: I05d3fa8b3494785a1933f159280b6c9ba6923c0d
CRs-Fixed: 926416
qcacld-2.0 to qcacld-3.0 propagation
Create a configuration item to program the first bucket
threshold of the scan results to have the flexibility to
adjust the first bucket threshold.
CRs-Fixed: 922979
Change-Id: I6fad27a2990f7555173e4735131e8392d0277009
This is qcacld-2.0 to qcacld-3.0 propagation
Currently driver drops the action frame category 18 - FST action frames.
This patch adds support for these frames in wlan host code.
Change-Id: I7021e328b7ebe9a1e46f526e3928c7d1279e1ad7
CRs-Fixed: 921117
This is qcacld-2.0 to qcacld-3.0 propagation
When STA is connected to 160MHz AP, channel width is updated to
20MHz since the 160MHz channel width is not handled.
Add support to handle the 160MHz BW in beacon IEs.
Change-Id: Id13164762d6da142093f049121440ce976cecfc1
CRs-Fixed: 924219
qcacld-2.0 to qcacld-3.0 propagation
On receiving channel switch announcement from AP delete all TDLS
peers before leaving BSS and proceed for channel switch.
Change-Id: I898f501d9d0afbbfef3a553ed63b52da5cd8f978
CRs-Fixed: 914129
qcacld-2.0 to qcacld-3.0 propagation
Few STA/P2P-client's are sending assoc req frame and waiting for
300-500ms. If they don't receive the assoc resp frame within
this time then they resending the assoc req frame. These frames
are not going to have retry bit set.
In the current design host driver is not handling these duplicate
assoc req frames without retry bit set.
To mitigate this issue, while processing assoc request frame,
if pStaDs entry already exists then send assoc response with
same tid and stop processing the assoc req further.
Change-Id: I6d67f4cd352bbee422301b832742e7386666037f
CRs-Fixed: 868736
qcacld-2.0 to qcacld-3.0 propagation
When disassoc request is received from peer and at the same time
if deauth request is received from supplicant, LIM cleanup
may not happen properly as there is a chance of session deletion
in limSendSmeDeauthNtf while cleanup in progress from
limProcessSmeDisassocCnf. This can result in not sending delbss to FW.
Hence, FW can crash when config bss is sent for new connection.
Following changes are added to handle this.
1. Add state eLIM_SME_WT_DISASSOC_STATE in __limProcessSmeDeauthReq
and allow host to post LIM_MLM_DEAUTH_REQ instead of invoking
limSendSmeDeauthNtf, where session is deleted.
2. Send eWNI_SME_DEAUTH_RSP if cleanup is already in progress to avoid
cleanup again. If mlm state is not eLIM_MLM_LINK_ESTABLISHED_STATE,
then it means cleanup is already in progress.
3. Return from __limProcessSmeDisassocCnf if cleanup is already in
progress.
4. Add check in limProcessMlmDeauthCnf to send deauth confirmation even
if state is eLIM_SME_WT_DISASSOC_STATE.
5. Add similar checks in limProcessMlmDisassocReqNtf to handle disassoc
from peer and supplicant simultaneously.
Change-Id: Ie19a7b79d835a5e5a77ef48f9379c1cf90dc38d7
CRs-Fixed: 878334
This is a qcacld-2.0 to qcacld-3.0 propagation.
1. Add log to print ssid, bssid, rssi, channel and country code
while connecting to an AP.
2. Add log to print disconnect reason when disconnect request is
received from user space.
3. Cleanup some of the logs moving it to appropriate log level
which are showing up as ERROR level in bug report.
Change-Id: Id8ea69a14a18565c226f89a8a5e10be46741d76d
CRs-Fixed: 914336
qcacld-2.0 to qcacld-3.0 propagation
Add supported class IE in beacon and probe response frames.
Change-Id: Ife4cb1b3db0119a9472cad0f861887c487b147d3
CRs-Fixed: 941466
