Any direct reference to adapter->vdev outside the initial
assignment should use get/put to properly refer the vdev.
core/hdd/src/wlan_hdd_ioctl.c
core/hdd/src/wlan_hdd_station_info.c
os_if/interop_issues_ap/src/wlan_cfg80211_interop_issues_ap.c
Change-Id: I897ee8ac2a4816b91ed48e2c32e97540430c5520
CRs-Fixed: 2714025
Firmware sends the HTT msg which has information about the
CFR. This information is required by CFR component to get the
CFR data capture.
Call CFR ucfg api to pass this CFR related info to the CFR component.
Change-Id: I6e9bdd991d8e7f84f35231900fc00ed18e89f835
CRs-Fixed: 2724722
ICNSS2 platform driver is used for moselle and adrastea which uses
IPCI and SNOC PLD layer, respectively. Add support to enable both
for ICNSS2 based to target flag.
Change-Id: I06fbacade99b09c9ea7347aa28e10968eaeedaa8
Introduce new INI sae_connect_retries to decide auth (initial connect
and roam auth) and connect retry for sae. MAX reties is capped to 2
and max for roam auth is 1.
Default is 0x49 i.e. 1 retry each.
Bits Retry Type
BIT[0:2] AUTH retries
BIT[3:5] Connection reties
BIT[6:8] ROAM AUTH retries
Change-Id: Idae86a7bdb32244c7f3a140b8591418b8238758a
CRs-Fixed: 2728458
Use global operating class to initiaize operating class array.
Country specific operating class table is used less and less now,
so use the global operating class by default.
Change-Id: Iaa6559d47cb1d8d30c8826dc3e7d5b63c743297b
CRs-Fixed: 2728601
Currently, policy mgr table entries correspond to NAN/NDI are
updated only if nan_dbs is supported. Update/access the
policy mgr table even when nan_conc_control is supported by host.
This allows the host to take care of NAN cuncurrencies through
policy mgr on the non-DBS platforms.
Process NAN enable request in host if nan_conc_control is
supported, which updates the NAN entry to policy mgr table.
Change-Id: Id6e58a9bfde6ceb66a8a0b33136880f75e36090f
CRs-Fixed: 2729995
Currently, non-dbs pcl tables don't have entries for
NAN/NDI when the target doesn't support DBS. Firmware takes care
of the NAN concurrencies in such targets.
But host has to take care of the NAN concurrencies when firmware
allows host to do so through WMI_SERVICE_NAN_DISABLE_SUPPORT.
So add entries in non-dbs pcl table to allow/block different
concurrencies in host.
Change-Id: I0c4c59065a2fbc3beae13b1217673e8290c1baa8
CRs-Fixed: 2729992
Present source of self RSN capability to copy in RSO command i.e
csr_roam_session's rsn_cap is zero, A new capability OCVC (Operating
Channel Validation Capable) bit is in RSN capabilities. FW enables
OCV feature only if STA and AP both supports it.
Hence update self RSN capability to FW in RSO start/update command.
Change-Id: I1db500142560ec64a24ffab0c414c0c2b733e454
CRs-Fixed: 2721095
Currently, SAP has to be moved to NAN channel once NAN enable is
successful. The frequency is copied to a uint8_t variable but
it can't hold the frequency as the value would be more than 2412.
It was initially declared to hold channel number. Change the
variable to qdf_freq_t to hold the frequency.
Also, move the SAP to NAN 2.4GHz channel in non-DBS platforms.
Change-Id: I27186c3a5915db549336537702287ee67cdce011
CRs-Fixed: 2729991
When nan_sap and nan_disable are supported but nan_dbs is not
supported,
1. Allow SAP+NAN concurrency if force SCC is supported
2. Disable NAN if SAP comes up on a different band and force SCC is
not supported
3. Reject NAN enable if SAP is already on a different band and force SCC is
not supported
Change-Id: Ic53eedcda2e5b314f9be2a4bd913d5e63f6613a2
CRs-Fixed: 2729986
nan_disable_support is the firmware capability to allow host to
disable NAN. So that host can disable NAN in any unsupported
concurrencies. This was actually introduced to handle
NAN concurrencies. Rename the capability flag and corresponding
APIs across host driver to resemble the functionality.
Change-Id: I24805194fdb855040bcc518acc96459ee7cb5128
CRs-Fixed: 2729984
For user request of get roam scan frequencies using vendor sub command
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET and vendor sub attribute
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL, host replies with list
of roam scan frequencies.
Change-Id: Ia63a5181e13541629a380dec9a032743d15add0c
CRs-Fixed: 2725834
Add changes to handle transition to the 2 new states:
1. Roaming in progress: Switch to this state when roam
start notification is received from firmware.
2. Roam Synch in progress: Switch to this from RSO
STARTED state if roam synch indication event is received
from firmware. Change to this state is also allowed in
RSO STOPPED state if supplicant disabled roaming on that
vdev - to allow roam invoke to be processed.
Also query the state machine to get the roaming status instead
of using discrete flags at various layers. Clean the redundant
roaming in progress, roam synch related flags.
Change-Id: Ide20a30d9d8c20a96d8bba70367b51b8643cae09
CRs-Fixed: 2725443
Fix the type mismatch issue in set wifi config PHY_MODE and
refactor related APIs.
Change-Id: I2d84f144766126c54e2ed449d367316b65fc769c
CRs-Fixed: 2706050
If STA DUT receives assoc response with assoc response status as
eSIR_MAC_TRY_AGAIN_LATER, host starts a pmf comeback timer to
send assoc request again on pmf comeback timer timeout.
Change-Id: Ifb28e44af86daef90db7146572cdfae26dfcaa20
CRs-Fixed: 2728459
Prevent wow if TDLS is started, allow wow if TDLS link disabled. This
feature is enabled only if lithium plaform isn't drv supported.
Change-Id: Ie66d62cb139fe9a1d292925a78f2dd861f16ef69
CRs-Fixed: 2716922
