Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation. The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation. The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This is the upstream fix for this bug. This patch differs
from the RHEL5 fix (Red Hat bz #555754) which simply writes to the 8-byte
value field of the quota. In upstream quota code, we're
required to write the entire quota (88 bytes) which can be split
across a page boundary. We check for such quotas, and read/write
the two parts from/to the corresponding pages holding these parts.
With this patch, I don't see the bug anymore using the reproducer
in Red Hat bz 555754. I successfully ran a couple of simple tests/mounts/
umounts and it doesn't seem like this patch breaks anything else.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to report both the accounting and enforcing flags if we are
in enforcing mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Currenly sync_quota_sb does a lot of sync and truncate action that only
applies to "VFS" style quotas and is actively harmful for the sync
performance in XFS. Move it into vfs_quota_sync and add a wait parameter
to ->quota_sync to tell if we need it or not.
My audit of the GFS2 code says it's also not needed given the way GFS2
implements quotas, but I'd be happy if this can get a detailed review.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
GFS2 now has three new mount options, statfs_quantum, quota_quantum and
statfs_percent. statfs_quantum and quota_quantum simply allow you to
set the tunables of the same name. Setting setting statfs_quantum to 0
will also turn on the statfs_slow tunable. statfs_percent accepts an
integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to
do any early sync when the local number of blocks free changes by at
least statfs_percent from the totoal number of blocks free. Setting
statfs_percent to 0 disables this.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support to GFS2 to send quota warnings via netlink.
Also it removes a stray \r which was left over from when the
code used to print warnings on the console.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support for viewing the current GFS2 quota settings
via the XFS quota API. The setting of quotas will be addressed
in a later patch. Fields which are not supported here are left
set to zero.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Both of these functions contained confusing and in one case
duplicate code. This patch adds a new check in do_glock()
so that we report -ENOENT if we are asked to sync a quota
entry which doesn't exist. Due to the previous patch this is
now reported correctly to userspace.
Also there are a few new comments, and I hope that the code
is easier to understand now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The "create" argument to qdsb_get() was only ever set to true,
so this patch removes that argument.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is no point in testing for GLF_DEMOTE here, we might as
well always release the glock at that point.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The plan is to add further operations to the gfs2_quotactl_ops
in future patches. The sync operation is easy, so we start with
that one.
We plan to use the XFS quota control functions because they more
closely match the GFS2 ones.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
These two functions are altered so that gfs2_quota_sync may
in future be called directly from the VFS. The GFS2 superblock
changes to a VFS super block and there is an addition of an int
argument which is currently ignored.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch renames the ops_*.c files which have no counterpart
without the ops_ prefix in order to shorten the name and make
it more readable. In addition, ops_address.h (which was very
small) is moved into inode.h and inode.h is cleaned up by
adding extern where required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead.
(as suggested in Documentation/spinlocks.txt)
Signed-off-by: Xu Gang <xug@cn.fujitsu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
o Reducing overhead by eliminating duplicated fields between structures
o Simplifcation of the code (reduces the code size by a fair bit)
o The locking interface is now the DLM interface itself as proposed
some time ago.
o Fewer lookups of glocks when processing replies from the DLM
o Fewer memory allocations/deallocations for each glock
o Scope to do further optimisations in the future (but this patch is
more than big enough for now!)
Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.
This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We only really need a single spin lock for the quota data, so
lets just use the lru lock for now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Deallocation of gfs2_quota_data objects now happens on-demand through a
shrinker instead of routinely deallocating through the quotad daemon.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Following on from the recent clean up of gfs2_quotad, this patch moves
the processing of "truncate in progress" inodes from the glock workqueue
into gfs2_quotad. This fixes a hang due to the "truncate in progress"
processing requiring glocks in order to complete.
It might seem odd to use gfs2_quotad for this particular item, but
we have to use a pre-existing thread since creating a thread implies
a GFP_KERNEL memory allocation which is not allowed from the glock
workqueue context. Of the existing threads, gfs2_logd and gfs2_recoverd
may deadlock if used for this operation. gfs2_scand and gfs2_glockd are
both scheduled for removal at some (hopefully not too distant) future
point. That leaves only gfs2_quotad whose workload is generally fairly
light and is easily adapted for this extra task.
Also, as a result of this change, it opens the way for a future patch to
make the reading of the inode's information asynchronous with respect to
the glock workqueue, which is another improvement that has been on the list
for some time now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a clean up of gfs2_quotad prior to giving it an
extra job to do in addition to the current portfolio of updating
the quota and statfs information from time to time.
As a result it has been moved into quota.c allowing one of the
functions it calls to be made static. Also the clean up allows
the two existing functions to have separate timeouts and also
to coexist with its future role of dealing with the "truncate in
progress" inode flag.
The (pointless) setting of gfs2_quotad_secs is removed since we
arrange to only wake up quotad when one of the two timers expires.
In addition the struct gfs2_quota_data is moved into a slab cache,
mainly for easier debugging. It should also be possible to use
a shrinker in the future, rather than the current scheme of scanning
the quota data entries from time to time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The final field in gfs2_dinode_host was the i_flags field. Thats
renamed to i_diskflags in order to avoid confusion with the existing
inode flags, and moved into the inode proper at a suitable location
to avoid creating a "hole".
At that point struct gfs2_dinode_host is no longer needed and as
promised (quite some time ago!) it can now be removed completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix GFS2's need_sync()'s use of do_div() on an s64 by using div_s64() instead.
This does assume that gt_quota_scale_den can be cast to an s32.
This was introduced by patch b3b94faa5f.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There are several places where GFP_KERNEL allocations happen under a glock,
which will result in hangs if we're under memory pressure and go to re-enter the
fs in order to flush stuff out. This patch changes the culprits to GFS_NOFS to
keep this problem from happening. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch combines the 2 patches in bug 434736 to correct the lock
ordering in the unstuffing of the quota inode in gfs2_adjust_quota and
adjusting the number of revokes in gfs2_write_jdata_pagevec
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_alloc_get may fail so we have to check it to prevent
NULL pointer dereference.
Signed-off-by: Cyrill Gorcunov <gorcunov@gamil.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.
In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This just eliminates an unused variable from the quota code.
Not likely to be a time saver.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is just a cleanup. Function gfs2_get_block() just calls
function gfs2_block_map reversing the last two parameters. By
reversing the parameters, gfs2_block_map() may be called directly
and function gfs2_get_block may be eliminated altogether.
Since this function is done for every block operation,
this streamlines the code and makes it a little bit more efficient.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As requested by Christoph, this patch cleans up GFS2's internal
read function so that it no longer uses the do_generic_mapping_read
function. This function is obsolete and GFS2 is the last user of it.
As a side effect the internal read code gets smaller and easier
to read and gfs2_readpage is split into two. One function has the locking
and the other function has the rest of the logic.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
This is the filesystem part of the patches to fix this bz. There are
additional userland patches (gfs2_quota, libgfs2) for the complete
solution. This patch adds a new field qu_ll_next to the gfs2_quota
structure. This field allows us to create linked lists of quotas in the
ondisk quota inode. Instead of scanning through the entire sparse quota
file for valid quotas, we can now simply walk through the user and group
quota linked lists to perform the do_list operation.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch forcibly unstuffs (if stuffed) the hidden quota inode at the
first availble opportunity. In any practical scenario the quota inode
won't be stuffed, so this is ok to do. Unstuffing the quota inode allows
us to ignore the case of a stuffed quota inode in gfs2_adjust_quota().
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).
The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.
The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.
This fixes Red Hat bz #239686
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a bug where gfs2 was writing update quota usage
information to the wrong location in the quota file.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes an error in the quota code where a 'struct
gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a
'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from
fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a locking mistake in the quota code, we do a mutex_lock instead
of a mutex_unlock.
Signed-off-by: Josef Whiter <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove duplicate di_uid/di_gid fields in favour of using
inode->i_uid/inode->i_gid instead. This saves 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fix means that bmap will map extents of the length requested
by the VFS rather than guessing at it, or just mapping one block
at a time. The other callers of gfs2_block_map are audited to ensure
they send the correct max extent lengths (i.e. set bh->b_size correctly).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a bug in the directory reading code, where we might have dereferenced
a NULL pointer in case of OOM. Updated the directory code to use the new
& improved version of gfs2_meta_ra() which now returns the first block
that was being read. Previously it was releasing it requiring following
code to grab the block again at each point it was called.
Also turned off readahead on directory lookups since we are reading a
hash table, and therefore reading the entries in order is very
unlikely. Readahead is still used for all other calls to the
directory reading function (e.g. when growing the hash table).
Removed the DIO_START constant. Everywhere this was used, it was
used to unconditionally start i/o aside from a couple of places, so
I've removed it and made the couple of exceptions to this rule into
separate functions.
Also hunted through the other DIO flags and removed them as arguments
from functions which were always called with the same combination of
arguments.
Updated gfs2_meta_indirect_buffer to be a bit more efficient and
hopefully also be a bit easier to read.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.
Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.
Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a tidy up of the GFS2 bmap code. The main change is that the
bh is passed to gfs2_block_map allowing the flags to be set directly
rather than having to repeat that code several times in ops_address.c.
At the same time, the extent mapping code from gfs2_extent_map has
been moved into gfs2_block_map. This allows all calls to gfs2_block_map
to map extents in the case that no allocation is taking place. As a
result reads and non-allocating writes should be faster. A quick test
with postmark appears to support this.
There is a limit on the number of blocks mapped in a single bmap
call in that it will only ever map blocks which are pointed to
from a single pointer block. So in other words, it will never try
to do additional i/o in order to satisfy read-ahead. The maximum
number of blocks is thus somewhat less than 512 (the GFS2 4k block
size minus the header divided by sizeof(u64)). I've further limited
the mapping of "normal" blocks to 32 blocks (to avoid extra work)
since readpages() will currently read a maximum of 32 blocks ahead (128k).
Some further work will probably be needed to set a suitable value
for DIO as well, but for now thats left at the maximum 512 (see
ops_address.c:gfs2_get_block_direct).
There is probably a lot more that can be done to improve bmap for GFS2,
but this is a good first step.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
