As a result of long path names and a large number of source files,
combined with upstream kernel build infrastructure changes, the
qcacld-3.0 build may encounter E2BIG errors when linking the final
wlan.o. To address this problem support for nested composite objects
is being added to the kernel. Update the Kbuild with the logic
required to take advantage of the nested composite support.
Change-Id: Ic6748517a922fc03a43acab2b44133b37e02707a
CRs-Fixed: 2861273
Currently UMAC_INTERFACE_MGR_OBJS are added to OBJS when
CONFIG_INTERFACE_MGR is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_INTERFACE_MGR_OBJS.
Change-Id: Ibfac21851b6a27a532cbe28a9be86909ea093e5d
CRs-Fixed: 2874549
Currently the qdf_lro.o rule is not located with the other QDF_OBJS
rules, so relocate it so that all of the QDF rules are contiguous.
Change-Id: Ia4d6e133901af900d5f63208e14ac24501ac005e
CRs-Fixed: 2868050
Currently the definitions of the Direct Buffer RX component are
defined in the middle of the WMA component definitions. Relocate these
definitions so that the WMA definitions are contiguous.
Change-Id: I3f83b70a18131a84cb262840103e705862498bc4
CRs-Fixed: 2868049
Currently HTT_OBJS are added to OBJS when CONFIG_LITHIUM is not
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HTT_OBJS.
Change-Id: Ifdce8f5ab6b4597156341620ae101ee8be2b4afd
CRs-Fixed: 2868008
Currently HAL_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to HAL_OBJS is
already conditional upon CONFIG_LITHIUM so remove the condition from
the assignment to OBJS.
Change-Id: I0dd7ca874561ff6c6cd8ccfdae1775f6dcb9bf12
CRs-Fixed: 2868007
Currently FWLOG_OBJS are added to OBJS when
CONFIG_FEATURE_FW_LOG_PARSING is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of FWLOG_OBJS.
Change-Id: I6b09d9dfa2553943d3bb4370dc1977106a14a7d5
CRs-Fixed: 2868006
Currently EPPING_OBJS are added to OBJS when CONFIG_FEATURE_EPPING is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
EPPING_OBJS.
Change-Id: I69f9b1b707c9475a393f89f2297e90e4ee8d1e5e
CRs-Fixed: 2868005
Currently DFS_OBJS are added to OBJS when
CONFIG_WLAN_DFS_MASTER_ENABLE is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of DFS_OBJS.
Change-Id: I0c04087feb76c7fbbaa4231f1c36a83624e54482
CRs-Fixed: 2868004
Currently FWOL_OBJS are added to OBJS when CONFIG_WLAN_FW_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
FWOL_OBJS.
Change-Id: I103628406108b0ca1d8290f61e379c796a63bce5
CRs-Fixed: 2868003
Currently OCB_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DSRC is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to OCB_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DSRC so remove the
condition from the assignment to OBJS.
Change-Id: I011aa37270b8024d2f558bdb18aac2a02e3c1026
CRs-Fixed: 2868002
Currently IPA_OBJS are added to OBJS when CONFIG_IPA_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to IPA_OBJS is
already conditional upon CONFIG_IPA_OFFLOAD so remove the condition
from the assignment to OBJS.
Change-Id: I16217146d44b790298e47516c28e1ce6445ffed6
CRs-Fixed: 2868001
Currently PKTLOG_OBJS are added to OBJS when CONFIG_REMOVE_PKT_LOG is
not enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
PKTLOG_OBJS.
Change-Id: I34b9bea3186e5bda12e7ce0d8a1327383170b6c1
CRs-Fixed: 2868000
Currently HOST_DIAG_LOG_OBJS are added to OBJS when BUILD_DIAG_VERSION
is enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HOST_DIAG_LOG_OBJS.
Change-Id: Icdf6898b848f682d9617537394651f533ba81553
CRs-Fixed: 2867999
Currently DISA_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DISA is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to DISA_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DISA so remove the
condition from the assignment to OBJS.
Change-Id: I2130b8efe12e5366b40856704d62d000a4e474f4
CRs-Fixed: 2867998
Currently ACTION_OUI_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_ACTION_OUI is enabled. An upcoming change requires
that assignments to OBJS be unconditional. Fortunately the assignment
of .o files to ACTION_OUI_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_ACTION_OUI so remove the condition from the
assignment to OBJS.
Change-Id: Icf1c4f061286e3ae88344b380deff4bf135143e1
CRs-Fixed: 2867997
Currently PKT_CAPTURE_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_PKT_CAPTURE is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to PKT_CAPTURE_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_PKT_CAPTURE so remove the condition from the
assignment to OBJS.
Change-Id: If9083c5ba382e1ae1a638b77e12437a707b69073
CRs-Fixed: 2867996
Currently FTM_TIME_SYNC_OBJS are added to OBJS when
CONFIG_FEATURE_WLAN_TIME_SYNC_FTM is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to FTM_TIME_SYNC_OBJS is already conditional
upon CONFIG_FEATURE_WLAN_TIME_SYNC_FTM so remove the condition from
the assignment to OBJS.
Change-Id: I57fd2c08f6c732018d50a232156e3b29c0fac285
CRs-Fixed: 2867921
Currently UMAC_GREEN_AP_OBJS are added to OBJS when
CONFIG_QCACLD_FEATURE_GREEN_AP is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of UMAC_GREEN_AP_OBJS.
Change-Id: If3e3a97d39c7f347c2ff91bcd3db86675dcaa664
CRs-Fixed: 2867913
Currently UMAC_CRYPTO_OBJS are added to OBJS when
CONFIG_CRYPTO_COMPONENT is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_CRYPTO_OBJS.
Change-Id: I28ca48d6876307814ce440a3fe53cb8f8df1d42f
CRs-Fixed: 2867906
Currently DP_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be unconditional.
Fortunately most of the assignments to DP_OBJS are already protected
by this feature. Update the logic so that all of the assignments are
protected, and remove the condition from the OBJS assignment.
Change-Id: Icc7d015831d8940bf1d91335be1439a70965801f
CRs-Fixed: 2867900
Currently hal_rx_flow.o is assigned to DP_OBJS, but since this is a
HAL file, change the assignment to HAL_OBJS.
Change-Id: Ie7c56300d3dd60b52305b5b3c7ace58c6e8cdb57
CRs-Fixed: 2867882
Currently TXRX3.0_OBJS are added to the OBJS aggregation only when
CONFIG_WLAN_FEATURE_DP_RX_THREADS is enabled. However only one of the
object files, dp_rx_thread.o, should be controlled by that feature.
Update the logic to conditionally add dp_rx_thread.o to TXRX3.0_OBJS,
to encapsulate all TXRX3.0_OBJS assignments within CONFIG_LITHIUM,
and unconditionally add TXRX3.0_OBJS to OBJS.
Change-Id: I6ceeafeab43a960277a1870daff5566288199ada
CRs-Fixed: 2867843
There are currently two different places where ol_txrx_event.o is
added to the final target object list. As part of ongoing Makefile
cleanup consolidate these to a single location.
Change-Id: Id342ae771830f5fd4d65c6c5523c36f1e50bc941
CRs-Fixed: 2867841
Enable FEATURE_HAL_DELAYED_REG_WRITE_V2 support for Tx rings
register writes and QCA_OL_DP_SRNG_LOCK_LESS_ACCESS support
for Rx rings register writes, for moselle platforms.
Change-Id: I6b2469d22a37a097fa721269d311c0076c3b89a0
CRs-Fixed: 2873528
Pass a new flag to the Kbuild and add a compile flag
to enable the BUILD_TAG information.
Change-Id: Ic9bc331b64e7cbf627f5f99758f4d556328cda10
CRs-Fixed: 2865654
To improve build time performance remove date and time
embedding from wifi DLKM Kbuild config.
Change-Id: I465699005b0e5eee762f528a8d8f102c1987b18e
CRs-Fixed: 2855334
Decouple BW monitor from WDI3_STATS_UPDATE and add as a
separate feature flag WDI3_STATS_BW_MONITOR.
Change-Id: I77fb5658d995daceaada6a7d64f669da706ead9c
CRs-Fixed: 2868582
Adding history to track the FST lock/unlock events; this
would come in handy in debugging deadlock issues.
Change-Id: I40f783e72e516330fdf71ac91553bc7c4338b82a
CRs-Fixed: 2854397
Increase the number of TWT peers allowed to 32 from current
default value of 2.
Change-Id: I9c081f602af059c940223ea2f66ea257a7d44f07
CRs-Fixed: 2825861
Modify connect start code in interface manager by
moving disable roam and tdls link teardown notify
APIs from HDD to if mgr. Alongside, move tdls link
teardown notify API from HDD to if mgr in start bss API.
Also, move the tdls link teardown API to TDLS module from
HDD module as TDLS should manage the wait logic.
Change-Id: I09fa31878563a3daaa7c5fde46327475829317b3
CRs-Fixed: 2811807
Classify the ICMP request packet and mark it to be
sent to the firmware in the packet control block.
Add an INI which indicates the time interval for
marking the ICMP requests to be sent to FW.
For the INI value:
-1, indicates to mark all ICMP requests to be sent to FW.
0, indicates that none of the ICMP requests will be sent to FW.
> 0, indicates the time interval for marking ICMP requests
to be sent to FW.
Change-Id: Ia9c41765cef64a4f5fd19019df595c9e7fd657e9
CRs-Fixed: 2826444
Currently RX_DIAG_WQ_MAX_SIZE is set to 0. Which means, there is no
limit to the number of FW diag events that can be queued for processing.
This may result in SKB memory pool is being blocked by FW diag events.
To avoid this, set RX_DIAG_WQ_MAX_SIZE default value as 1000.
Change-Id: I44c69f910a512d8f9a1aed0809c55c6d93737cb2
CRs-Fixed: 2824443
Currently, FW diag logs, management frames and stats responses are
processed in worker context. Because of this, there is a possible
out of memory scenario when there are huge number of diag events
waiting in work queue.
To address this, process diag events in a separate worker thread and
set the limit for the number of diag events that can be queued in
work queue.
Change-Id: Ib9f7b8042479e8b2f4d67c9a4250932b018f29a4
CRs-Fixed: 2821534
New files are created for 6ghz scan functionality. Add the same
for compilation.
Change-Id: I3f715db50fb5020afea74297794d07ddc5b39913
CRs-Fixed: 2806415
Use separate hang reason for case that lack of credit after suspend.
Meanwhile add hang buf offset check to avoid overflow.
Change-Id: Ic794d02672cd663598da66b9e75924c41b5ef0e8
CRs-Fixed: 2801343
Add feature GENERIC_SHADOW_REGISTER_ACCESS_ENABLE to enable
shadow reg write for generic shadow registers.
This is enabled only for HSP.
Change-Id: I90302aa050baa9128313dbaf0c4ab57e426289b3
CRs-Fixed: 2794917
User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: Ic7c6232558b9411106bf3fb88ec8d9b0b28b045d
CRs-Fixed: 2778476
The naming of the osif files and functions is not correct as
these files and functions include wlan_cfg80211 as prefix
instead of osif.
Correct file name and function name should contain the component
name first, followed by feature name followed by method.
Change-Id: I26a592de71bbde0f731436acb970778c85d19226
CRs-Fixed: 2786807
Enable feature to send EXIT_POWER_SAVE QMI from host instead of
HOST_WAKEUP_FROM_SLEEP WMI. When FW receive EXIT_POWER_SAVE QMI,
it will implicitly consider that it also received HOST_WAKEUP_FROM_SLEEP
and send ACK for it through CE2.
Change-Id: I14515b62ff3ff1b4ed66397039ce180a99d49d43
CRs-Fixed: 2779383
