Update core ops to invoke calc_bw_ar50lt API to
calculate bus bw requirement for ar50lt.
Change-Id: I1c8e1766d9aa2f8ad44498587b171c2827759ddb
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
VPx cycle requirement is not same as CABAC.
Hence update required as per system recommendation.
CRs-Fixed: 2560714
Change-Id: If600bc9c4abb364dba5f807c944976be992567c9
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
The commit adds the following
1 Keep DMA mask aligned with api definition.
2 Replace the various division operations with 32 bit compatible modules.
Change-Id: I7bc931ffd124ef2b0be8d2bec44fbebf29d4cfb3
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Fix to set 7 instead of 1 to firmware to
enable all custom bias, matrix and limit.
Change-Id: Idd8bf0f6036ef2919855f379fffa51d5339eba1d
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Set operating rate to 1 by force for HEIC, so as
to avoid overloads.
Change-Id: If3f980e096c7e30368b9c6a280e78bbe1625e87a
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Driver is not polling for the PC Ready to be
set and truning of the regulators/clocks. Fix the
same.
H2X Interrupt has to be enabled for every boot.
CRs-Fixed: 2572953
Change-Id: Ib24b35dcebedf464bcd461718a18e732531ea4ce
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Fix to use correct CSC coefficients for
BT601 to BT709 CSC.
Change-Id: I8365603fed10151db0efbea0058bb896c419c3f4
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Fix to use output port resolution to determine
vbv delay.
Change-Id: Id6dc80f1349d0f5b10be2fa6343fb98816156f58
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
10 bit support is available only for hevc codec type.
So increase encoder output buffer size(factor - 1.25)
only for hevc.
Change-Id: I49f6bccc074814d8c737f47fd82907a018ac169a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
For HFR(like 960 fps) usecases requires higher buffer count-24.
But due to framework change(277033), We don't need any addtional
buffers for HFR usecases also. So reducing the count back to 12.
Change-Id: Ia3669858cde0962275d00f31d2bbb7308a3ce983
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
1. Set perf mode for image session buffers so that
they will be processed quickly.
2. Set max frequency for any turbo sessions.
Change-Id: Icf9b0af5cffcd395356783a9ff7a9421a309f52c
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Check ubwc_config for not being NULL before
dereferencing.
Change-Id: Ia4c87ea4a0e963b33165b0ea9a9c39339cc65832
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Add new ioctl to query the supported ROI map type.
Based on vpu version, report whether support 2-bit type
ROI map, or 2-byte type ROI map.
Change-Id: I6db970f5f36e4cc61365867c2a07d63aaf9365ea
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
For hevc codec, LCU sizes are 32x32 or 64x64. Existing
capabilities consider alignment with 16. Considering a
hevc clip of dimension 4096x2160, the coded resolution
becomes 4096x2176. Limiting the cap with 4096x2160 will
break such usecase, hence keeping the capabilities
considering 32-byte alignment.
Change-Id: I505843878f177c63b88959f92ce3a7d5a06b996b
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
-Fix to add 4 extra dcvs buffers at encoder input and decoder
output side irrespective of fps and resolution.
-Decrease total encoder input buffer count from 16 to 8 for non-hfr
use-cases.
-Increase total encoder output buffer count for hfr use-cases
irrespective of resolution.
Change-Id: I2fcda6e8c93bcc0df8c3168049ebf4a60e6bb5f1
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Input buffer counts, ie Dec Bitstream and Enc Yuv,
depend on input resolution. Hence they should be recalculated
in set format. Stale values can result in excess memory usage.
CRs-Fixed: 2548727
Change-Id: I57c87270a6613da290f14484897cef16e964e27a
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Increase vpp cycles by 2% for 1080P@HSR480 encode
usecase so that the video core runs at higher
frequency(366Mhz) helping to achieve the desired
performance.
Change-Id: Id81abd36ab79067d52da9371d1dd5bdcfe622389
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
make changes in video driver to make it as module.
Change-Id: I00788a1b72cc799f655b16e1bc6b7d6d6e0441f9
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Reject the buffer device address mapping when the device
address is mapped in secure context bank for a non-secure
instance and for the converse as well.
Change-Id: Ic2fc578acd23d3582b390b24cc9d829d49d00d4d
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
For secure encoding case, there is no camera usage. Hence,
by default make number of planes as 1. If any input requires
extradata, client will enable it and driver will update
number of planes.
Change-Id: Id9afd0a286a53d5d4c6045ba58227f57a0a8e0ca
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Fix to add condition to skip mbpf capability checking
for HEIF image encoding.
Change-Id: Ife323366b8c08040c3f6fab8a0d15b89fe6f6777
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Default buffer count will not be sufficient for HFR(fps > 480).
So recalculate buffer count, if fps is updated before calling
vidioc_reqbuf.
Change-Id: Iec792892d283072f064c4148c65560b6a7e31d45
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Set CABAC as the default entropy mode for h264.
Also, check profile settings to ensure that CABAC mode
is set only for applicable profiles.
Change-Id: Id5e67c1a7ac0862ea963312ebdaee58945bf8bc0
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Increase total input buffers used for HFR cases. Required
for smooth performance.
Change-Id: Ia7dd49ead71239c2fb669e016d5e9fd2f94ca862
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
DCVS scaling window should be equal to the additional buffers
allocated for DCVS and independent of the buffer count required
by Client and FW.
CRs-Fixed: 2527739
Change-Id: I665a3d9792f44ea031d6c8d05d6e7a546a22f9a8
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
SKU index is not applicable for all targets. Hence no need
to keep it mandatory. SKU related changes will happen only
when the property is present otherwise will default to 0.
Change-Id: I88076ea95bccd4130202c055e5c148d817dd302e
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
