Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mmiotrace map had a bug that would typecast the entry from
the trace to the wrong type. That is a known danger of C typecasts,
there's absolutely zero checking done on them.
Help that problem a bit by using a GCC extension to implement a
type filter that restricts the types that a trace record can be
cast into, and by adding a dynamic check (in debug mode) to verify
the type of the entry.
This patch adds a macro to assign all entries of ftrace using the type
of the variable and checking the entry id. The typecasts are now done
in the macro for only those types that it knows about, which should
be all the types that are allowed to be read from the tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need a kind of disambiguation when a print_line callback
returns 0.
_There is not enough space to print all the entry.
Please flush the seq and retry.
_I can't handle this type of entry
This patch changes the type of this callback for better information.
Also some changes have been made in this V2.
_ Only relay to default functions after the print_line callback fails.
_ This patch doesn't fix the issue with the broken pipe (see patch 2/4 for that)
Some things are still in discussion:
_ Find better names for the enum print_line_t values
_ Change the type of print_trace_line into boolean.
Patches to change that can be sent later.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the underlining ring buffer for ftrace now hold variable length
entries, we can take advantage of this by only storing the size of the
actual event into the buffer. This happens to increase the number of
entries in the buffer dramatically.
We can also get rid of the "trace_cont" operation, but I'm keeping that
until we have no more users. Some of the ftrace tracers can now change
their code to adapt to this new feature.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the boot/initcall tracer.
It's primary purpose is to be able to trace the initcalls.
It is intended to be used with scripts/bootgraph.pl after some small
improvements.
Note that it is not active after its init. To avoid tracing (and so
crashing) before the whole tracing engine init, you have to explicitly
call start_boot_trace() after do_pre_smp_initcalls() to enable it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace "none" tracer by the recently created "nop" tracer.
Both are pretty similar except that nop accepts TRACE_PRINT
or TRACE_SPECIAL entries.
And as a consequence, changing the size of the ring buffer now
requires that tracing has already been disabled.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The functions are already 'extern' anyway, so there's no problem
with linkage. Removing these ifdefs also helps find any potential
compiler errors.
Suggested by Andrew Morton.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A no-op tracer which can serve two purposes:
1. A template for development of a new tracer.
2. A convenient way to see ftrace_printk() calls without
an irrelevant trace making the output messy.
[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring
buffer. The related file operations are derived from code by Frédéric
Weisbecker <fweisbec@gmail.com>.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
trace_vprintk() for easier implementation of tracer specific *_printk
functions. Add check check for no_tracer, and implement
__ftrace_printk() as a wrapper.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While profiling the smp behaviour of the scheduler it was needed to know to
which cpu a task got woken.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently ftrace_printk only works with the ftrace tracer, switch it to an
iter_ctrl setting so we can make us of them with other tracers too.
[rostedt@redhat.com: tweak to the disable condition]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a feature that can help kernel developers debug their
code using ftrace.
int ftrace_printk(const char *fmt, ...);
This records into the ftrace buffer using printf formatting. The entry
size in the buffers are still a fixed length. A new type has been added
that allows for more entries to be used for a single recording.
The start of the print is still the same as the other entries.
It returns the number of characters written to the ftrace buffer.
For example:
Having a module with the following code:
static int __init ftrace_print_test(void)
{
ftrace_printk("jiffies are %ld\n", jiffies);
return 0;
}
Gives me:
insmod-5441 3...1 7569us : ftrace_print_test: jiffies are 4296626666
for the latency_trace file and:
insmod-5441 [03] 1959.370498: ftrace_print_test jiffies are 4296626666
for the trace file.
Note: Only the infrastructure should go into the kernel. It is to help
facilitate debugging for other kernel developers. Calls to ftrace_printk
is not intended to be left in the kernel, and should be frowned upon just
like scattering printks around in the code.
But having this easily at your fingertips helps the debugging go faster
and bugs be solved quicker.
Maybe later on, we can hook this with markers and have their printf format
be sucked into ftrace output.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some tracers will need to work with more than one entry. In order to do this
the trace_entry structure was split into two fields. One for the start of
all entries, and one to continue an existing entry.
The trace_entry structure now has a "field" entry that consists of the previous
content of the trace_entry, and a "cont" entry that is just a string buffer
the size of the "field" entry.
Thanks to Andrew Morton for suggesting this idea.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When CONFIG_FTRACE is not enabled, the tracing_start_functon_trace
and tracing_stop_function_trace should be nops.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new work with converting the trace hooks over to markers broke the
command line recording of ftrace. This patch fixes it again.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
here is a patch that makes mmiotrace work almost well within the tracing
framework. The patch applies on top of my previous patch. I have my own
output formatting in place now.
Summary of changes:
- fix the NULL dereference that was due to not calling tracing_reset()
- add print_line() callback into struct tracer
- implement print_line() for mmiotrace, producing up-to-spec text
- add my output header, but that is not really called in the right place
- rewrote the main structs in mmiotrace
- added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP
- made some functions in trace.c non-static
- check current==NULL in tracing_generic_entry_update()
- fix(?) comparison in trace_seq_printf()
Things seem to work fine except a few issues. Markers (text lines injected
into mmiotrace log) are missing, I did not feel hacking them in before we
have variable length entries. My output header is printed only for 'trace'
file, but not 'trace_pipe'. For some reason, despite my quick fix,
iter->trace is NULL in print_trace_line() when called from 'trace_pipe'
file, which means I don't get proper output formatting.
I only tried by loading nouveau.ko, which just detects the card, and that
is traced fine. I didn't try further. Map, two reads and unmap. Works
perfectly.
I am missing the information about overflows, I'd prefer to have a
counter for lost events. I didn't try, but I guess currently there is no
way of knowning when it overflows?
So, not too far from being fully operational, it seems :-)
And looking at the diffstat, there also is some 700-900 lines of user space
code that just became obsolete.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Porting ftrace to the marker infrastructure.
Don't need to chain to the wakeup tracer from the sched tracer, because markers
support multiple probes connected.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refactor code from tracing_read_pipe() and create trace_seq_to_user().
Moved trace_seq_reset() call before iter->trace->read() call so that
when all leftover data is returned, trace_seq is reset automatically.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a method for open_pipe and open_read to the pluggins
so that they can add a header to the trace pipe call.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch sets up the infrastructure to record overruns of the tracing
buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In cleaning up of the sched_switch code, the function trace recording
of task comms was removed. This patch adds back the recording of comms
for function trace. The output of ftrace now has the task comm instead
of <...>.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is first installment of adding documentation to the ftrace.
Expect many more patches of this kind in the near future.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Lock debugging enabled cause huge performance problems for tracing. Having
the lock verification happening for every function that is called
because mcount calls spin_lock can cripple the system.
This patch converts the spin_locks used by ftrace into raw_spin_locks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With the adding of the configuration changes in the Makefile to prevent
tracing of functions in the ftrace code, all tracing of all the ftrace
code has been removed. Unfortunately, one of the selftests, relied on
a function to be traced. With the new change, the function was no longer
traced and the test failed.
This patch separates out the test function into its own file so that
we can add the "-pg" flag to the compilation of that function and the
adding of the mcount call to that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
now that we have a kbuild method for notrace, no need to pollute the
C code with the annotations.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A new check was added in the ftrace function that wont trace if the CPU
trace buffer is disabled. Unfortunately, other tracers used ftrace() to
write to the buffer after they disabled it. The new disable check makes
these calls into a nop.
This patch changes the __ftrace that is called without the check into a
new api for the other tracers to use, called "trace_function". The other
tracers use this interface instead when the trace CPU buffer is already
disabled.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
we can hold all cpu trace buffer locks at once - put each into a
separate lock class.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch creates a file called trace_pipe in the tracing
debug directory. This file is a consumer of the trace buffers.
This means that reads of this file consumes the entries from
the trace buffers so that they will not be read a second time,
as contrast to the static buffers latency_trace and trace.
Reading from the trace_pipe will remove the entries from trace
and latency_trace too.
The advantage that trace_pipe has is that it can record live
traces. It will block when there is nothing in the buffer,
and read the entries as they are entered. An EOF happens when
tracing is disabled (tracing_enabled = 0).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Later patches will need to print the same things as the seq output
does. But those outputs will not use the seq utility. This patch
adds a buffer to the iterator, that can be used by either the
seq utility or other output.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes the way the CPU trace buffers are handled.
Instead of always starting from the trace page head, the logic
is changed to a producer consumer logic. This allows for the
buffers to be drained while they are alive.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
