Instead of using two different enums for setting adapter mode,
combined them to make only one set of enum.
Change-Id: Iaa945f64dd9f90f6abc0b1716b176fce0971ba71
CRs-Fixed: 985273
Instead of using two different enums for setting adapter mode,
combined them to make only one set of enum.
Change-Id: Ie41244becec39fe1f5f24a721f5b24e137e7fd26
CRs-Fixed: 985273
Current connection update timeout value for DBS concurrency case
is 500ms, which is not long enough as there are other WMI messages
need to be processed by master thread. Increase the timeout value
to 1000ms to ensure the set hardware mode WMI message has enough
time to be processed
Change-Id: Idecf2e830a7a37258787eb4f8c5f117cbe2a825b
CRs-fixed: 983174
Send channel switch request instead of performing SAP restart when
doing a MCC to SCC switch. This is controlled using the existing INI
item 'gWlanMccToSccSwitchMode'. The new value of '3' will perform
this channel change by sending (E)/CSA whereas the old value of '2'
can still be used to do a channel change by doing SAP restart
Change-Id: I79e7317219503de0a9957940f3cf7a4e91c7a521
CRs-Fixed: 986202
Enable feature flag FEATURE_WLAN_MCC_TO_SCC_SWITCH in the Kbuild to
make use of the MCC to SCC switch feature. The resulting errors in
compilation are fixed along with some enhancement in the debug logs
in this feature path
Change-Id: I0ddb2f371c28ade6d8fc9ea12ba104a99394827f
CRs-Fixed: 986079
Remove obsolete regdomain data structures. Also remove the obsolete
fields from REG_DOMAIN and REG_DMN_PAIR_MAPPING data structures.
Change-Id: I1ff906571dfadf9cf6a4dc963d8eef62acc5f6b5
CRs-Fixed: 961806
Firmware does not require the sub-ctl codes from the host. Therefore,
remove the calculation of sub-ctl codes from the host APIs. Also
remove the associated data structures.
Change-Id: Ib5d5f074b45f2dae2bb9a7c172ee7f8750ad5355
CRs-Fixed: 961806
Define the correct country codes per the data published by the
regulatory compliance team.
Change-Id: I2474acb2657ba1e4a0f62aef013df296aebfcb53
CRs-Fixed: 961806
Avoid message handler of netlink APIs to be OS agnostic. Retain the
message handler to get the concurrency matrix in HDD.
Change-Id: Ieb121512e3d8ae15678da46ed8425c07fd003f69
CRs-Fixed: 946161
40 mhz channel array is redundant and does not give the
correct channel bonding information. Therefore remove
these channels, bonding array, and its associated usage.
Change-Id: I913fb97cdc913b1a027d21b0df526dfd5cd5902f
CRs-Fixed: 856727
Re-arrange core regulatory code between HDD and CDS
layers. Move the OS dependent code to HDD.
Change-Id: I8ac26a48d0e8d613b2f6c23fd764e5cf94365c39
CRs-Fixed: 856727
Commit: 89c771e ("cfg80211: Convert del_station() callback to
use a param struct")
Commit: 9885686 ("cfg80211: Specify frame and reason code for
NL80211_CMD_DEL_STATION")
These two commits have been merged in Kernel 3.19.
Add a kernel version macro to support this.
And refactor the inclusion of CFG80211_DEL_STA_V2 by adding a
helper function to clean it up, that way we can keep the flag
only in wlan_hdd_cfg80211.h/c as this is the cfg80211 interface
related changes.
Change-Id: I811065b7fa1cf2aee68cfe63c5cf78c2270e5af7
CRs-fixed: 963651
Fix the reason code used during Nss update request. If
there is MCC upgrade or DBS downgrade, the hw mode change
request internally send the Nss update request. But, the
current implementation uses the same fixed reason code
during Nss update request and due to this on receiving the
hw mode change response, the expected callback function is
not getting invoked. Fix this by passing the right reason
code during Nss update request.
CRs-Fixed: 978663
Change-Id: I706cb9a86d66d8601ec87f560459604e562f6037
Fix the incorrect value of receive spatial streams added for use
in operating mode field. The Operating Mode field is present in
the Operating Mode Notification frame and Operating Mode
Notification element. These are used to notify STAs that the
transmitting STA is changing its operating channel width, the
maximum number of spatial streams it can receive, or both.
As per the 802.11ac spec:
- If the Rx NSS Type subfield is 0, indicates the maximum number
of spatial streams that the STA can receive.
- If the Rx NSS Type subfield is 1, indicates the maximum number of
spatial streams that the STA can receive as a beamformee in an SU
PPDU using a beamforming steering matrix derived from a VHT
Compressed Beamforming report with Feedback Type subfield
indicating MU in the corresponding VHT Compressed Beamforming
frame sent by the STA.
Set to 0 for Nss = 1
Set to 1 for Nss = 2
...
Set to 7 for Nss = 8
Change-Id: I60cb7259df3986c0356666a357b8a4ef575b7ca4
CRs-Fixed: 973411
Move cdf/cds module related operation from
lim_handle_hw_mode_change_on_csa to cdf_handle_hw_mode_change_on_csa
to keep majority of cdf/cds operation in one place.
Change-Id: I5af9ee941f8430be49cf2e467f9eac77dc09dde4
CRs-Fixed: 972184
Set the hw mode, if needed, during channel switch in STA and
P2P-CLI scenario. The STA/P2P-CLI on receiving the channel change
event may need to do a hw mode change to get the best out of the
hw capabilities.
e.g.1, In a STA+SAP concurrency, the STA and SAP are doing SCC on
channel 6. When the STA interface receives a channel event for
channel 36, it is better the driver moves to a DBS scenario.
e.g.2, In a STA+SAP concurrency, the STA is on channel 6 and the
SAP is on channel 36. When the STA interface receives a channel
event for channel 36, it is better the driver moves from a DBS
scenario to a SCC scenario.
For MCC upgrade, the following steps are taken
1. Opportunistic timer is started
2. vdev restart is initiated on the new channel
3. PM will check if MCC upgrade can be done on timer expiry
For DBS downgrade, the following steps are taken
1. PM will initiate HW mode change to DBS right away
2. vdev restart is initiated on the new channel
Change-Id: I202842bf28c3117e8cc91954cdfd3b39a0062f4e
CRs-Fixed: 972184
qcacld-2.0 to qcacld-3.0 propagation
When self recovery initiated, CRASH_INJECT command is sent to
firmware. If firmware crash doesn't reach the host in time then
RuntimePM may kick in and try to suspend the PCIe link. At this
time, firmware might already been crashed just that host missed
the interrupt. Add the logic to prevent the Runtime suspend when
initiating the recovery so that host driver doesn't attempt the
suspend which may not go through and cause stability issues.
Change-Id: Ie8d5fc6aa08e4864fa5f03119c25037f5aeb5cec
CRs-fixed: 924538
Current code is using seperate change interface for IBSS and
STA/P2PCLI.
Fix the API such that IBSS/STA/P2PCLI all can use same API.
Change-Id: I7a1d9fa3ef42091fcb7f71d95b604e3dceb8da50
CRs-Fixed: 973626
Update the policy manager table during channel switch in case of
STA/CLI/SAP/P2P-GO mode. The vdev (re)start response carries the
updated vdev parameters such as the new MAC to which the vdev
connection moved to etc.
Change-Id: I55a56acdba8234e09d1439698b2b13751d4e9b2d
CRs-Fixed: 970794
Change the data path and external modules to use the new
converged common data path APIs.
Change-Id: Ifb48178efd012b6ad9ea6f6d5230d0a809922b1c
CRs-Fixed: 994638
Rename hif_callbacks to hif_driver_state_callbacks and remove
function pointer for monotonic API and fix some minor typos.
Change-Id: Iae2326e26b58a00e4cc197104b31aca36d569a8e
CRs-Fixed: 967765
Remove CDS instances in HIF for WIN/MCL convergence.
a. Update con_mode param in HIF
b. Have callbacks to CDS from HIF to update CDS global context
Change-Id: Ie9a65b5684f38bb2bf4feac615b97415e2bc7ed9
CRs-Fixed: 967765
Initialize Ramdump Work as member of ol_context instead of
global work. Pass ol_context as private data to host to target
module.
Change-Id: I97712f40c4bfcd7d854e2a89727d73fd7178598c
CRs-Fixed: 967765
Remove ol_softc as argument in BMI API's and pass ol_context
as the default argument.
Change-Id: I66b5daed047c7efe9a01cac30d2d0e7427aab2cd
CRs-Fixed: 967765
Create bmi context in global cds context for BMI operations.
Modify HIF BMI API to pass dma command and response
Pass BMI DMA Command and Response address to HIF BMI API as
arguments instead of using bmi context in HIF.
Change-Id: Ifdb51581a33665b1857c63e33b1c26bbd99575eb
CRs-Fixed: 967765
Max_peers configuration is needed only by WMA. Remove dependency of
ol layer for max_peers and move it WMA.
Change-Id: I336b02ae84c72c70ca459425b38b197e5fe551a0
CRs-Fixed: 967765
