Commit Graph

1479 Commits

Author SHA1 Message Date
Pavel Roskin
d495657200 [PATCH] orinoco_nortel: Add Symbol LA-4123 ID
Add ID for Symbol LA-4123.  Reported by Tomas Novak <tap@post.cz>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:51 -05:00
Pavel Roskin
c8cb00f6ac [PATCH] orinoco_nortel: Fix incorrect PCI resource use
orinoco_nortel was broken during conversion to iomem API.  Wrong PCI BAR
is used for chipset registers.  Reported by Tomas Novak <tap@post.cz>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:50 -05:00
Stephen Hemminger
c4c48d83e9 [PATCH] sky2: version 0.11
Version number change.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Stephen Hemminger
6e15b71249 [PATCH] sky2: handle hardware packet overrun
It is possible for hardware to get confused when an oversized frame
is received. In that case, just drop the packet and increment a counter.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Stephen Hemminger
6ed995bb29 [PATCH] sky2: don't lose multicast addresses
Don't lose multicast addresses when link goes down or ring
parameters change.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Stephen Hemminger
1b537565a8 [PATCH] sky2: handle out of memory on admin changes
Don't die if we run out of memory on mtu or ring parameter change.
For other admin operations, don't rebuild Rx ring, just restart the PHY.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Stephen Hemminger
edd702e847 [PATCH] skge: error handling on resume
Also have to handle out of memory condition on resume.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:38:35 -05:00
Jens Osterkamp
b35de2eb38 [PATCH] spidernet: fix Kconfig after BPA->CELL rename
We changed the name of the Kconfig symbols along with
the move to arch/powerpc. This one hunk got lost during
the conversion.

From: Jens.Osterkamp@de.ibm.com
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:37:39 -05:00
Andrew Morton
26b7625c46 [PATCH] git-netdev-all: s2io warning fix
drivers/net/s2io.c: In function `s2io_txdl_getskb':
drivers/net/s2io.c:2023: warning: cast from pointer to integer of different size
drivers/net/s2io.c: In function `s2io_open':
drivers/net/s2io.c:3325: warning: long long unsigned int format, u64 arg (arg 3)
drivers/net/s2io.c:3333: warning: long long unsigned int format, u64 arg (arg 3)
drivers/net/s2io.c: In function `s2io_eeprom_test':
drivers/net/s2io.c:4749: warning: long long unsigned int format, long unsigned int arg (arg 3)
drivers/net/s2io.c:4749: warning: long long unsigned int format, u64 arg (arg 4)
drivers/net/s2io.c:4768: warning: long long unsigned int format, long unsigned int arg (arg 3)
drivers/net/s2io.c:4768: warning: long long unsigned int format, u64 arg (arg 4)

I had to update this patch because more warnings have just appeared.

You cannot print a u64 with %l or %ll.  You do not know what type the
architecture is using.  It must be cast to a type which matches the printf
control string - unsigned long long.

The patch also fixes some overly-long strings.  Please try to keep the code
looking neat in an 80-col window.

Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Ananda Raju <Ananda.Raju@neterion.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:37:38 -05:00
Stephen Hemminger
f15943f500 [PATCH] skge: version number (1.3)
Enough changes for one version.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:06 -05:00
Stephen Hemminger
3b8bb472ad [PATCH] skge: handle out of memory on ring parameter change
If changing ring parameters is unable to allocate memory, we need
to return an error and take the device down.

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5715
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:06 -05:00
Stephen Hemminger
2770b5172e [PATCH] skge: get rid of Yukon2 defines
Don't need to keep Yukon-2 related definitions around for Skge
driver that is only for Yukon-1 and Genesis.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:06 -05:00
Stephen Hemminger
7731a4ea1b [PATCH] skge: handle out of memory on MTU size changes
Changing the MTU size causes the receiver to have to reallocate buffers.
If this allocation fails, then we need to return an error, and take
the device offline. It can then be brought back up or reconfigured
for a smaller MTU.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Stephen Hemminger
e8df855460 [PATCH] skge: avoid up/down on pause param changes
Change the pause settings doesn't need to cause link to go down/up.
It can be handled by the phy_reset code.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Stephen Hemminger
ee294dcda1 [PATCH] skge: avoid up/down on speed changes
Change the speed settings doesn't need to cause link to go down/up.
It can be handled by doing the same logic as nway_reset.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:36:05 -05:00
Stephen Hemminger
aa84505fb0 [PATCH] chelsio: transmit routine return values
The Chelsio driver does not return the correct values from
the transmit routine. It works because the values don't conflict,
but it is using the wrong defines. And -ENOMEM is not a legal return
value.

Since t1_sge_tx is only called in one place, making it static
allows compiler to be potentially inline it.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 09:35:17 -05:00
Adrian Bunk
14904398e5 [SUNGEM]: Fix link error with CONFIG_HOTPLUG disabled.
gem_remove_one() is called from the __devinit gem_init_one().

Therefore, gem_remove_one() mustn't be __devexit.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 23:09:44 -08:00
Michael Chan
38690194bc [TG3]: Fix ethtool memory test
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test.
Overwriting memory in this region can cause ASF problems.

Update version and release date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:28 -08:00
Michael Chan
b401e9e2ec [TG3]: Add tw32_wait_f() for some sensitive registers
The tw32_f() function (register write with immediate read flush) can
hang when used on some registers to switch clock frequencies and
power. A new tw32_wait_f() is added for such registers with the
delay before the read and after the read.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:04 -08:00
Michael Chan
dc56b7d46d [TG3]: Some low power fixes
Add some missing workarounds in tg3_set_power_state():

1. Workaround to prevent overdrawing current on 5714.

2. Do not power down 5700's PHY because of hw limitation.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:26:28 -08:00
Michael Chan
8c2dc7e1e7 [TG3]: Fix peer device handling
Locate the pdev_peer for dual port 5714 NIC devices in addition to
5704 devices. The name is also changed to tg3_find_peer() from
tg3_find_5704_peer(). It is also necessary to call netdev_priv() to
get to the peer's private tg3 structure.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:26:02 -08:00
Jeff Garzik
418fbfe979 Merge branch 'master' 2005-12-19 00:09:53 -05:00
Al Viro
37eb47ed44 [PATCH] s2io: __iomem annotations for recent changes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15 10:04:29 -08:00
Michael Chan
6921d201f7 [TG3]: Fix low power state
Fix the following bugs in tg3_set_power_state():

1. Both WOL and ASF flags require switching to aux power.

2. Add a missing handshake with firmware to enable WOL.

3. Turn off the PHY if both WOL and ASF are disabled.

4. Add nvram arbitration before halting the firmware.

5. Fix tg3_setup_copper_phy() to switch to 100Mbps when
   changing to low power state.

Update revision and date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:15:53 -08:00
Michael Chan
16fe9d74f1 [TG3]: Fix 5704 single-port mode
If the dual-port 5704 is configured as a single-port device with
only one PCI function, it would trigger a BUG() condition in
tg3_find_5704_peer(). This fixes the problem by returning its
own pdev if the peer cannot be found.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:09:54 -08:00
Michael Chan
6a9eba15f5 [TG3]: Fix suspend and resume
Fix tg3_suspend() and tg3_resume() by clearing and setting the
TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state()
looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine
when to appropriately switch to aux power.  

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:08:58 -08:00
Michael Chan
381291b7d3 [TG3]: Fix nvram arbitration bugs.
The nvram arbitration rules were not strictly followed in a few places
and this could lead to reading corrupted values from the nvram.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:08:21 -08:00
Jeff Garzik
d22a8ccff7 Merge branch 'upstream-fixes' 2005-12-13 11:36:18 -05:00
Jeff Garzik
98684a9d91 [netdrvr skge] fix build 2005-12-13 11:35:22 -05:00
Jeff Garzik
783e3385a1 Merge branch 'upstream-fixes' 2005-12-13 00:07:46 -05:00
Jeff Kirsher
fd80324174 e1000: Fixes for 8357x
- TSO workaround
- Fixes eeprom version reporting
- Fix loopback test
- Fix for WOL

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2005-12-13 00:06:22 -05:00
Jeff Garzik
ff7eba15ae Merge branch 'e1000' 2005-12-13 00:01:02 -05:00
Stephen Hemminger
ee1c81917a [PATCH] skge: get rid of warning on race
Get rid of warning in case of race with ring full and lockless
tx on the skge driver. It is possible to be in the transmit
routine with no available slots and already stopped.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 23:33:03 -05:00
Olaf Hering
016cc85072 [PATCH] pcnet32: use MAC address from prom also on powerpc
The CSR contains garbage after a coldboot on RS/6000.
One some systems (like my 44p 270) the MAC address is all FF,
on others (like my B50) it is ff:ff:ff:fd:ff:6b.

It can eventually be fixed by loading pcnet32, set the interface
into the UP state, rmmod pcnet32 and load it again. But this worked
only on the 270.

Only netbooting after a cold start provides the correct MAC address
via prom and CSR. This makes it very unreliable.
I dont know why the MAC is stored in two different places. Remove
the special case for powerpc, which was added in early 2.4 development.

Signed-off-by: Olaf Hering <olh@suse.de>

 drivers/net/pcnet32.c |    5 -----
 1 files changed, 5 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:30:38 -05:00
Jeff Garzik
20234989a8 Merge branch 'master' 2005-12-12 15:30:15 -05:00
Stephen Hemminger
fed954dafc [PATCH] sky2: version 0.10
Change version number.  Still don't have enough history on this
to call it 1.0 yet.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:22 -05:00
Stephen Hemminger
75d070c56f [PATCH] sky2: disable rx checksum on Yukon XL
Under load, my SysKonnect SK-9S22 sees duplicate checksums from
earlier packets.  Doesn't happen on other platforms so just disable
receive checksum there.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:22 -05:00
Stephen Hemminger
585b56012f [PATCH] sky2: turn on tx flow control
Turn symmetric flow control on by default. This was an oversight
in the initial versions.

Signed-off-by: Stephen HEmminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:22 -05:00
Stephen Hemminger
d70cd51ac0 [PATCH] sky2: prefetch tuning
Add a couple more prefetches to where we walk the rings.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
8c463ef792 [PATCH] sky2: quiet ring full message in case of race
Don't print ring full message if we lose race.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
8cc048e338 [PATCH] sky2: handle tx timeout
Put more logic in to try and handle transmit timeout recovery.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
69634ee736 [PATCH] sky2: interrupt coalescing tuning
Adjust interrupt deferral values for better performance and avoid
starvation issues under stress.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
3e4b32e116 [PATCH] sky2: interrupt/poll optimization
Optimize poll routine by not clearing interrupt till after
processing, and checking for more work before re-enable.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
af2a58acb1 [PATCH] sky2: transmit complete routine optimization
Hand optimize transmit completion routine.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
13b97b74b9 [PATCH] sky2: transmit complete index optimization
Change transmit complete handling to use the status values
in the poll list because they are in-cache, rather than reading
non-cached memory for chips status.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
0e3ff6aab1 [PATCH] sky2: transmit logic fixes
Some transmit side small fixes:
 * When computing number of list elements per transmit, do full
   comparision to check for checksuming.
 * Get rid of racy check for tx_complete
 * Change stop test to match wake condition.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:21 -05:00
Stephen Hemminger
6cdbbdf305 [PATCH] sky2: tx/rx ring data structure split
Split Tx and Rx ring into two different data structures.
Tx needs the next value (to handle partial status), and
Rx always needs the mapaddr (to handle resubmitting same buffer).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
734d186846 [PATCH] sky2: map length optimization
Don't need to keep track of mapping length in ring structure
because we can get the same info from other info.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
129372d052 [PATCH] sky2: ring distance optimization
Faster way to compute ring distance.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
f2e46561cc [PATCH] sky2: no irq disable needed during tx
Don't need to disable interrupts during the transmit routine.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
91c86df5a8 [PATCH] sky2: phy processing in workqueue rather than tasklet
Do phy processing in a work queue rather than a tasklet.
This means we can let bottom halves run.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
fb17358fe3 [PATCH] sky2: ethtool get/set interrupt coalescing
Add support for get/set the interrupt coalescing settings.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
bdb5c58ebe [PATCH] sky2: copy threshold as module parameter
Make the copy threshold a module parameter for those who
may want to turn it off.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
6e23231b65 [PATCH] sky2: device structure alignment
It is a useful optimization to rearrange the structure
slightly to align receive and transmit portions.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:20 -05:00
Stephen Hemminger
92f965e8c5 [PATCH] sky2: don't die if we see chip rev 0xb5
There maybe new versions of Yukon2 in the future, so make the
driver more robust to handle this.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 15:27:19 -05:00
Jeff Garzik
b1086eef81 Merge branch 'master' 2005-12-12 15:24:45 -05:00
Stephen Hemminger
1f064a87c8 [TG3]: remove warning on race
[ Move assosciated code comment to the correct spot, and
  update driver version and release date -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-06 17:36:44 -08:00
Stephen Hemminger
92f268e034 [PATCH] sk98lin: rx checksum offset not set
The checksum offsets for receive offload were not being set correctly.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:43:40 -05:00
Jeff Garzik
fd8a882b61 Merge branch 'master' 2005-12-03 21:08:17 -05:00
Stephen Hemminger
f89c2b4645 [PATCH] sky2: interrupt not cleared.
One of the rearrangements dropped this and it means
sky2 spins in napi/interrupt.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-03 20:29:03 -05:00
Stephen Hemminger
d359b6ff6a [PATCH] ixp2000: change netif_schedule_test to __netif_schedule_prep
Sky2 update changed name of netif_schedule_test to __netif_schedule_prep

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-03 20:29:03 -05:00
Brice Goglin
0f52bf9058 [PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200
There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig
(one for ipw2100 and one for ipw2200).  The attached patch splits it into
IPW2100_DEBUG and IPW2200_DEBUG.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Cc: "James P. Ketrenos" <ipw2100-admin@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 04:51:34 -05:00
Takis
c75f4742e2 [PATCH] ipw2200: kzalloc conversion and Kconfig dependency fix
- Use kzalloc for IPW2200
- Fix config dependency for IPW2200

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Yi Zhu <yi.zhu@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 04:51:34 -05:00
Jeff Garzik
62d65a8062 Merge branch 'upstream-fixes' 2005-12-01 04:51:26 -05:00
Jeff Garzik
ea182d4aef [netdrvr skge] fix typo, fix build 2005-12-01 04:31:32 -05:00
Dan Streetman
f89b232173 [PATCH] airo.c: add support for IW_ENCODE_TEMP (i.e. xsupplicant)
Hello Jeff,

this patch changes causes the airo driver to not reset the card when a
temporary WEP key is set, when the IW_ENCODE_TEMP flag is used.  This is
needed for xsupplicant as 802.1x, LEAP, etc. change WEP keys frequently
after authentication and resetting the card causes infinite
reauthentication.

Javier and Jean agree with the patch, Javier suggested I send this to
you, can you apply this?

Thanks.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:40:34 -05:00
Komuro
ab80882bf3 [netdrvr fmvj18x_cs] fix multicast bug
* use set_rx_mode to (re)initialize the multicast table.
* MC_FILTERBREAK is 64 (= 8 * 8bit)
* remove local_info_t.mc_filter
2005-12-01 02:37:17 -05:00
Matthieu CASTET
1d97f38448 [wireless airo] reset card in init
without this patch after an rmmod, modprobe the card won't work anymore
until the next reboot.

This patch seem safe to apply for all cards as the bsd driver already do
that.

I had to add a timeout because strange things happen (issuecommand will
fail) if the card is already reseted (after a reboot).

PS : it seems there are missing reset when leaving monitor mode...

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
2005-12-01 02:35:26 -05:00
Stephen Hemminger
1096e87174 [PATCH] skge: handle VLAN checksum correctly on yukon rev 0
If using UDP over VLAN, with the skge driver there is a possibility
of generating an incorrect checksum. This is a unlikely occurrence
because it is only an issue on Yukon revision 0, and that revision
doesn't seem to exist on any current hardware (probably early prototype).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:28:56 -05:00
Pavel Roskin
c08ad1e304 [PATCH] orinoco: fix setting power management parameters
Power management parameters could not be set by iwconfig due to
incorrect error handling.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:28:56 -05:00
Ralf Baechle
ee7ebdf402 [PATCH] jazzsonic: Fix platform device code
Use platform_driver_unregister not driver_unregister to unregister a
struct platform_driver.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:26:46 -05:00
Ralf Baechle
23c2a7b5de [PATCH] jazzsonic: Fix build error.
jazz_sonnic_device -> jazz_sonic_device

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:26:46 -05:00
Ralf Baechle
56344d822e [PATCH] mipsnet: Fix Copyright notice.
Sorry, no sekr1t mips c0dez ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:26:45 -05:00
Lennert Buytenhek
127477840b [PATCH] ixp2000: add driver version, bump version to 0.2
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:27 -05:00
Lennert Buytenhek
8ce51d69b7 [PATCH] ixp2000: add netpoll support
Add netpoll support to the ixp2000 driver.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:27 -05:00
Lennert Buytenhek
cffbfcaf00 [PATCH] enp2611: disable/enable SERDES carrier on interface down/up
Disable/enable the SERDES carrier when an interface is administratively
downed/upped.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:27 -05:00
Lennert Buytenhek
c6e429bdd6 [PATCH] pm3386: implement reset
Implement pm3386 reset.  A reset zeroes out the internally stored MAC
addresses, so we need to save and reload them by hand.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:27 -05:00
Lennert Buytenhek
df86550602 [PATCH] pm3386: add hook for setting carrier
Add a pm3386 hook for disabling/enabling the SERDES carrier, so that
we can disable it when the interface is administratively downed, and
enable it when it is upped.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:27 -05:00
Lennert Buytenhek
0b85c0ebde [PATCH] pm3386: add hook for setting MAC address
When we reset the pm3386, it loses its internally stored MAC addresses
that were programmed into it by the bootloader (and are used by the
hardware for the generation of PAUSE frames.)  Add a hook to allow
setting these addresses so that we can program them back by hand.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
7ed98bfdea [PATCH] ixp2000: report MAC addresses for each port on init
After initialising, report the MAC address that we're using for
each port.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
350f19632d [PATCH] enp2611: report link up/down events
Report carrier going up/down.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
c44185d4dc [PATCH] enp2611: use 'dev' in link status timer
We assign nds[i] to a local variable 'dev', which we never use
afterwards.  Use the local variable instead.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
de287fd596 [PATCH] enp2611: don't check netif_running() in link status timer
Even after an interface has gone !netif_running(), we still want to
catch the 'carrier went down' event for our internal bookkeeping.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
ee61249468 [PATCH] ixp2000: use netif_rx_schedule_test
The sky2 driver introduced netif_rx_schedule_test().  This is
exactly what we need, so remove our local version of this function
(which was called netif_rx_schedule_prep_notup) and use the generic
one instead.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
6744a5069b [PATCH] caleb/pm3386: include proper header files
Make caleb.c and pm3386.c include their own header files, to catch
incorrect prototype definitions.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
f48a8815f8 [PATCH] pm3386: remove unnecessary udelays
Remove a number of unnecessary udelay() calls.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:26 -05:00
Lennert Buytenhek
178f171da7 [PATCH] pm3386: zero stats properly
Zero our stats structure properly.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:25 -05:00
Lennert Buytenhek
0c49919a47 [PATCH] ixp2000: register netdevices last
Do not register our netdevices with the kernel until we've actually
finished setting up the hardware and microcode.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:25:25 -05:00
Eugene Surovegin
8169bd9191 [PATCH] ibm_emac: fix graceful stop timeout handling
This patch fixes graceful stop timeout handling in PPC4xx EMAC driver.

Currently, when we stop TX/RX channels we just do some number of loops
without relying on actual spent time. This has finally bitten me on
one of our systems (heavy network traffic during start up, RX channel
is stopped several times to configure multicast list).

Graceful channel stop can take up to 1 frame time, so I've added
device specific timeout counter which depends on current link speed
and calls to udelay() to really wait required amount of time before
giving up.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:23:35 -05:00
shemminger@osdl.org
35b8fcab1b [PATCH] sk98lin: remove /proc interface
Remove device specific proc interface. It doesn't handle
renames correctly; it ain't worth fixing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:52 -05:00
shemminger@osdl.org
8f7a17d12a [PATCH] sk98lin: remove redundant fields in device info
Shrink size of per device data by removing redundant fields
or things that are only used at boot up.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:52 -05:00
shemminger@osdl.org
09f5a21438 [PATCH] sk98lin: allow ethtool checksum on/off per port
Allow control of checksumming parameters via ethtool.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:52 -05:00
Jeff Garzik
e9022ee6c3 Merge branch 'upstream-fixes' 2005-12-01 02:22:47 -05:00
shemminger@osdl.org
be0df20cb5 [PATCH] sk98lin: avoid message confusion with skge
Avoid possible confusion between skge and sk98lin driver by
tagging messages properly.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:03 -05:00
shemminger@osdl.org
4f4c815042 [PATCH] sk98lin: add permanent address support
Add permanent address and link status support via ethtool.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:03 -05:00
shemminger@osdl.org
596f86a8d8 [PATCH] sk98lin: fix checksumming code
Remove code from sk98lin that does it's own checksum validation.
This code is incorrect when dealing with nested protocols like
VLAN's, and it is better to use regular receive code path to
handle hardware checksum.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:03 -05:00
shemminger@osdl.org
5f4f9dc113 [PATCH] sky2: update version number
Update version number and print version in boot message.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:21 -05:00
shemminger@osdl.org
50241c4c59 [PATCH] sky2: use pci_register_driver
Switch to using pci_register_driver as per current convention.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:21 -05:00
shemminger@osdl.org
af4ed7e6ba [PATCH] sky2: remove pci-express hacks
Eliminate special case tuning for PCI-Express. This code
causes receive hangs and doesn't help performance much anyway.

Signed-off-by: Stephen Hemminger <shemmnger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:21 -05:00
shemminger@osdl.org
65497dacd8 [PATCH] sky2: byteorder annotation
Use byteorder annotation for hardware structures

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
2224795d7e [PATCH] sky2: dual port tx completion
Sometimes on dual port cards, one tx complete may cover both
ports. To handle that rearrange poll routine to lookup at
end.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
018d1c667e [PATCH] sky2: race with MTU change
Avoid possible race conditions when doing MTU and change and shutdown.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
0a12257697 [PATCH] sky2: change netif_rx_schedule_test to __netif_schedule_prep
I didn't like the name netif_rx_schedule_test(), in earlier patches
and changed to __netif_rx_schedule_prep to be more consistent.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
a018e3305f [PATCH] sky2: handle DMA boundary crossing
Handle the case of DMA spanning 32 bit boundary.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
5a5b1ea026 [PATCH] sky2: add Yukon-EC ultra support
Add support for Yukon-EC Ultra chip as implemented in SysKonnect's
driver version 8.26.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
13210ce5c0 [PATCH] sky2: improve receive performance
Changes to receive side processing:
	* bigger receive ring
	* clean up polling loop

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:20 -05:00
shemminger@osdl.org
42eeea0145 [PATCH] sky2: fix receive flush/pause issues
Fix issues with pause and flush. This code works on
all chip versions tested.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:19 -05:00
shemminger@osdl.org
ef743d3359 [PATCH] sky2: add MII support
Add MII ioctl interface to sky2.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:19 -05:00
shemminger@osdl.org
2143764348 [PATCH] sky2: eliminate special case for EC-A1
Eliminate special case for EC-A1. The overhead isn't so
great that having config option is worth it.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:20:19 -05:00
Jesse Brandeburg
a174fd88d2 [PATCH] e1000: fix for dhcp issue
Parse outgoing packets in e1000_transfer_dhcp_info as raw packet even if
protocol bits are set.  pump, for instance causes kernel panic on some
systems, if parsed via udp header.

Thanks to Derrell Lipman <Derrell.Lipman@BacklotTech.com> for reporting and
testing.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:10:11 -05:00
Francois Romieu
981d9c176d b44: increase version number
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-30 22:35:39 +01:00
Francois Romieu
3410572d51 b44: early return in dev->do_ioctl when the device is not up
The device has not gone through a whole reset/init sequence until the
device is up. Accessing the mii interface before this point is not
safe.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-30 22:32:13 +01:00
Mark Lord
d9e2d185bf b44: missing netif_wake_queue() in b44_open()
This patch fixes a problem plaguing Dell notebooks with built-in b44
ethernet: The driver refuses to transmit packets of any kind until after
the first 5-second tx_timeout occurs. This bug causes DHCP negotiation to
fail (timeout) during installation of Ubuntu Linux.

Signed-off-by: Mark Lord <lkml@rtr.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-11-30 22:30:23 +01:00
Jeff Garzik
4ab4326779 Merge branch 'master' 2005-11-29 03:51:15 -05:00
Jeff Garzik
2226340eb8 Merge branch 'master' 2005-11-29 03:50:33 -05:00
Jeff Garzik
2e06cb5859 [bonding] Remove superfluous changelog.
No need to record this information in source code, its all in the git
repository, and kernel archives.
2005-11-28 13:54:22 -05:00
Richard Knutsson
18317ab0ca [PATCH] net: Fix compiler-error on dgrs.c when !CONFIG_PCI
drivers/net/dgrs.c: In function `dgrs_init_module':
drivers/net/dgrs.c:1598: `dgrs_pci_driver' undeclared (first use in this function)

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-22 09:13:41 -08:00
Jeff Garzik
30765528d1 Merge branch 'master' 2005-11-20 01:05:46 -05:00
Jeff Garzik
c902f981b7 Merge branch 'upstream-fixes' 2005-11-18 15:07:11 -05:00
Jeff Garzik
f7492f17f2 [wireless hermes] build fix 2005-11-18 15:06:59 -05:00
Jeff Garzik
e1d7a2de6c Merge branch 'linville-e1000' of git://git.tuxdriver.com/git/netdev-jwl 2005-11-18 13:58:20 -05:00
Jeff Garzik
51c83a946d Merge branch 'upstream-fixes' of git://git.tuxdriver.com/git/netdev-jwl 2005-11-18 13:57:44 -05:00
John W. Linville
6b27adb607 [PATCH] e1000: zero-out pointers in e1000_free_desc_rings
In e1000_free_desc_rings, zero-out pointers after the memory they
point to is freed.  The test rings are static and get re-used, and
failures during subsequent test setups can cause e1000_free_desc_rings
to get called with dirty pointers.  Dirty pointers can cause oopses
or crashes...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18 13:52:39 -05:00
John W. Linville
e98fc4aae1 [PATCH] e1000: avoid leak when e1000_setup_loopback_test fails
In e1000_loopback_test, make sure to call e1000_free_desc_rings if
e1000_setup_loopback_test fails.  Currently in that case it will not
get called, causing a leak.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18 13:52:39 -05:00
James Ketrenos
eaf8f53bc0 [PATCH] ipw2100: Fix 'Driver using old /proc/net/wireless...' message
ipw2100: Fix 'Driver using old /proc/net/wireless...' message

Wireless extensions moved the get_wireless_stats handler from being
in net_device into wireless_handler.

A prior instance of this patch resolved the issue for the ipw2200.
This one fixes it for the ipw2100.

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18 13:51:40 -05:00
John W. Linville
a7a461b32f [PATCH] fec_8xx: make CONFIG_FEC_8XX depend on CONFIG_8xx
Change CONFIG_FEC_8XX to depend on CONFIG_8xx instead of CONFIG_FEC.
CONFIG_FEC depends on ColdFire CPUs, which does not apply for the
PPC 8xx processors.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18 13:51:34 -05:00
Jeff Garzik
97bae8dc96 Merge branch 'upstream-fixes' 2005-11-18 13:36:39 -05:00
Lennert Buytenhek
15d014d131 [PATCH] intel ixp2000 network driver
The way the hardware and firmware work is that there is one shared RX
queue and IRQ for a number of different network interfaces.  Due to this,
we would like to process received packets for every interface in the same
NAPI poll handler, so we need a pseudo-device to schedule polling on.

What the driver currently does is that it always schedules polling for
the first network interface in the list, and processes packets for every
interface in the poll handler for that first interface -- however, this
scheme breaks down if the first network interface happens to not be up,
since netif_rx_schedule_prep() checks netif_running().

sky2 apparently has the same issue, and Stephen Hemminger suggested a
way to work around this: create a variant of netif_rx_schedule_prep()
that does not check netif_running().  I implemented this locally and
called it netif_rx_schedule_prep_notup(), and it seems to work well,
but it's something that probably not everyone would be happy with.

The ixp2000 is an ARM CPU with a high-speed network interface in the
CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.)
The CPU package also contains 8 or 16 (again depending on the IXP
model) 'microengines', which are somewhat primitive but very fast
and efficient processor cores which can be used to offload various
things from the main CPU.

This driver makes the high-speed network interface in the CPU visible
and usable as a regular linux network device.  Currently, it only
supports the Radisys ENP2611 IXP board, but adding support for other
board types should be fairly easy.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:32:22 -05:00
Andy Fleming
7f7f53168d [PATCH] Gianfar update and sysfs support
This seems to have gotten lost, so I'll resend.

Signed-off-by: Andy Fleming <afleming@freescale.com>

* Added sysfs support to gianfar for modifying FIFO and stashing parameters
* Updated driver to support 10 Mbit, full duplex operation
* Improved comments throughout
* Cleaned up and optimized offloading code
* Fixed a bug where rx buffers were being improperly mapped and unmapped
* (only manifested if cache-coherency was off)
* Added support for using the eTSEC exact-match MAC registers
* Bumped the version to 1.3
* Added support for distinguishing between reduced 100 and 10 Mbit modes
* Modified default coalescing values to lower latency
* Added documentation
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:31:26 -05:00
Gabriel A. Devenyi
c5b42f343d [PATCH] drivers/net/wireless/hermes.c unsigned int comparision
hermas_bap_pread,  hermes_bap_pwrite, and hermes_bap_pwrite_pad all have a parameter "len" that is declared unsigned,
but checked for a value less than zero. Auditing the callers, it is possible for len to be passed a negative value, so len should be an int.

Thanks to LinuxICC (http://linuxicc.sf.net)

Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:31:00 -05:00
Roger While
cbf7c42b72 [PATCH] prism54 : Remove extraneous udelay/register read
In isl_38xx.c
In routine isl38xx_trigger-device

Move unnecessary udelay/register read.
This is only required when hand-compiling the driver and
setting  VERBOSE > SHOW_ERROR_MESSAGES

Signed-off-by: Roger While <simrw@sim-basis.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:29:41 -05:00
Ralf Baechle
3445470932 [PATCH] SAA9730: Add missing header bits.
This header file patch was missing from the recent SAA9730 patch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:29:41 -05:00
Ralf Baechle
0c0abbc580 [PATCH] au1000_eth: Include <linux/config.h>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Au1000 ethernet driver references plenty of CONFIG_* symbols.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:29:41 -05:00
Ralf Baechle
70f1e002cf [PATCH] IOC3: Replace obsolete PCI API
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:29:41 -05:00
John W. Linville
620d9aa95b [PATCH] i82593.h: make header comment GPL-compatible
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:29:06 -05:00
Ananda Raju
fed5eccdcf [PATCH] s2io: UFO support
This patch implements the UFO support in S2io driver. This patch uses the UFO
interface available in linux-2.6.15 kernel.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:28:15 -05:00
Jesse Brandeburg
2afecc047e [PATCH] e100: re-enable microcode with more useful defaults
For the four versions of hardware that we (currently) support microcode
download on, the default configuration of our receive interrupt mitigation
microcode was too aggressive, and caused unnecessary delays when pinging,
and low(er) throughput on single connection latency sensitive performance
tests.

This code adds microcode support, and sets the defaults to more reasonable
settings. It also explains the functionality in the code in more detail.
Compile and load tested, shows expected behavior for slight delay of ping
packets (1-2ms) when ucode is loaded, and decent interrupt moderation for
small packets, while maintaining good throughput.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:27:07 -05:00
Jeff Garzik
f1b8c63ef4 Merge branch 'halasa-hdlc' of git://git.tuxdriver.com/git/netdev-jwl 2005-11-18 13:24:33 -05:00
Jeff Garzik
1f8fc99300 Merge branch 'upstream-jgarzik' of git://git.tuxdriver.com/git/netdev-jwl 2005-11-18 13:23:52 -05:00
Jeff Garzik
638cbac8de Merge branch 'master' 2005-11-18 13:23:21 -05:00
Jeff Garzik
9724212646 Merge branch 'for-jeff' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 2005-11-18 13:21:24 -05:00
Russell King
e52542443a [PATCH] smc91x: fix bank mismatch
The smc91x driver relies upon register bank 2 being selected whenever
the interrupt handler is called.  This isn't always so, especially if
we have a link change event during PHY configuration.

This results in register bank 0 being selected when the interrupt
handler is called, causing the wrong registers to be read for the
IRQ mask and status.  In turn, this causes us to spin with a
permanently asserted IRQ.

The patch ensures that smc_phy_configure always exits with register
bank 2 selected.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:10:30 -05:00
Nicolas Pitre
5d0571d915 [PATCH] smc91x: fix one source of spurious interrupts
Not only SMC_ACK_INT(IM_TX_EMPTY_INT) in in smc_hardware_send_pkt)
appears to be unnecessary (tested with an SMC91C94 and SMC91C111), but
it seems to trigger spurious interrupts on some machines as well.
Removed.

While at it, let's log any remaining spurious interrupts if any (and
clean usage of the max IRQ loop count value).

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:10:30 -05:00
Zhu Yi
3b26b1100e [PATCH] ipw2200: fix error log offset calculation
This fixes a slab corruption issue in the ipw2200 driver: it essentially
multiplied the error log number _twice_ by the size of the error element
entry (once explicitly in the code, and once implicitly as part of the
regular pointer arithmetic).

Cc: Henrik Brix Andersen <brix@gentoo.org>
Cc: Bernard Blackham <bernard@blackham.com.au>
Cc: Zilvinas Valinskas <zilvinas@gemtek.lt>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
--
2005-11-17 08:32:58 -08:00
Pekka Enberg
efb3442cf1 [PATCH] ipw2200: disallow direct scanning when device is down
The function ipw_request_direct_scan() should bail out when the device
is down.  This fixes a lockup caused by wpa_supplicant triggering
ipw_request_direct_scan() while the driver was in a middle of a reset
due to firmware errors.

Thanks to Zilvinas Valinskas for reporting the bug and helping me
debug it.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17 08:32:58 -08:00
Francois Romieu
e53091fae5 r8169: do not abort when the power management capabilities are disabled
The capabilities of the 8169 can be disabled but it is hardly a reason
to prevent the use the device. The (so far) unusual behavior has been
reported on a MIPS platform by Yoichi Yuasa.

Spotted-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16 23:44:41 +01:00
Francois Romieu
7c8b2eb4c7 r8169: fix printk_ratelimit in the interrupt handler
I keep on getting "printk: N messages suppressed" messages.  We need to test
netif_msg_intr() _before_ running printk_ratelimit(), because the latter
updates state.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16 23:44:05 +01:00
Adrian Bunk
7635d345b2 [PATCH] hostap: rename hostap.c to hostap_main.c
I wanted to remove the #include "hostap_ioctl.c" from hostap.c and
build hostap_ioctl.c separately, but this doesn't work since hostap.c
has the same name as the module.

After renaming hostap.c this will be possible.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-16 14:13:20 -05:00
Christophe Lucas
5bc4c36d7c [PATCH] atmel: audit return code of create_proc_read_entry
Signed-off-by: Christophe Lucas <clucas@rotomalug.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-16 14:13:20 -05:00
Carlo Perassi
4d791aadf6 [PATCH] atmel: CodingStyle cleanup
Reading this driver I noticed some trailing whitespaces and tabs so I
removed them with some 80th column fitting and a few more similar
things.

Signed-off-by: Carlo Perassi <carlo@linux.it>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-16 14:13:20 -05:00