Set the user power save configuration setting in NL power save
command handler.
Change-Id: I8f4d1955071af08a5c0511a4c01c46d79e70e1b0
CRs-Fixed: 2743237
AGO/AP is started and beaconing, but the hostapd_cli status cmd still
show "dfs". This will happen when the STA connected on DFS
channel and AGO/AP is starting on same DFS channel.
By design the AGO/AP CAC is skipped due to STA+SAP DFS concurrency.
If we skip CAC timer, we will need to indicate the CAC event
even though driver doesn't perform CAC, otherwise hostapd will
stuck in "DFS" state.
Change-Id: I7961d0b976fd84fc1f29449d98eb150d1463a92f
CRs-Fixed: 2733624
It will enable periodic capture of tsf and qtime pair.
The qtime will be used as reference for determining
instantaneous tsf.
The 'cat tsf’ command to fetch tsf will print the tsf
at that instant as well along with qtime and host time.
CRs-Fixed: 2736030
Change-Id: I11eb70d4ae710ef2bf50ebee708801fa67d0396c
Issue: Currently host supports WLAN_AKM_SUITE_FT_8021X_SHA384,
RSN_AUTH_KEY_MGMT_CCKM and RSN_AUTH_KEY_MGMT_OSEN AKM
in sta mode but doesn't advertise these akm suites which
may cause issue for FT_8021X_SHA384, RSN_AUTH_KEY_MGMT_CCKM
and RSN_AUTH_KEY_MGMT_OSEN supported connection.
Fix: update wiphy->iftype_akm_suites and advertise missing akm
suites.
Change-Id: I43762c38e15746f50f897a6026b1b96fd571ec4d
CRs-Fixed: 2713183
- Limit the timeout value of the BLM entry if it has big comeback
value and allow connection to that BSSID.
- Fix the BLM entry time stamp boundary checks.
Change-Id: I07bf7b1fce1c1e8d349c4fc0a9b0fed07f237197
CRs-Fixed: 2741689
Possible use of uninitialized Variable "report" in
rrm_process_beacon_req.
Fix is to initialize "report" pointer to NULL,
before use.
Change-Id: I1dcbec60b0028d52046ce28836df83a04e2ed830
CRs-Fixed: 2734078
During idle shutdown(T1 Thread), Driver sends the PDEV
suspend command to FW. If ACK is not received, driver initiates
the work for self recovery. As a part of self recovery(T2 thread)
driver allocates the memory and sends the force fw hang cmd and
wait for the event.
T1 thread continues and stop all the modules and check for mem leaks.
Since t2 thread is not completed and free the memory, the crash
happens as a part of mem leak check.
Fix this race condition by cancelling and flushing the recovery work
in cds close.
CRs-Fixed: 2730021
Change-Id: Ieffff621e0838b341531c5b7feda1277ee4f70fd
In wma_get_trigger_detail_str() driver prints the roam trigger
detail for Low rssi and Periodic scan triggers, the RSSI value of
the current AP is the value before roam scan is triggered. But
the firmware considers the rssi of the current AP after roam scan
is complete to calculate the next RSSI threshold. So there could
be mismatch in the current rssi value and next rssi threshold
when roam_info->rssi_trig_data.threshold is used to print the
current AP rssi.
Use roam_info->current_rssi to print the current connected AP
rssi in the roam trigger logging.
Change-Id: Ib154bb3cbdfe13dbcdd8c8830cdafb6daefa34b5
CRs-Fixed: 2739346
Since there is common API to get spectral version, so use ucfg API to
get spectral version directly and remove unused codes.
Change-Id: Icfd4c68a035166dcaa32478128107249df2c4c95
CRs-Fixed: 2575839
Currently, bus bw timer is not stopped if STA disconnection is
timed out. Due to this hdd_bus_bandwidth_deinit fails.
Force stop the bus bw timer during hdd_wlan_stop_modules to avoid
hdd_bus_bandwidth_deinit to fail.
Change-Id: Idcdf011383838f1dc061f3e0f32ada97e617a8c9
CRs-Fixed: 2739304
As part of beacon report request , currently driver sets last
beacon report indication data field to be 1 for last frame of
every channel. This is incorrect as per spec as the
expectation is to set this only after all channels of all
beacon measurement requests are done.
Add change to set the last beacon report fragment bit only
after measurement is complete on all channels for all the
measurement request index for a beacon report request. If
last channel has empty result and AP supports last beacon
report indication, then send empty report with last beacon
report indication element.
Change-Id: Ic8902b61c5a370ec828022cd73dffdef9eb37f32
CRs-Fixed: 2720249
In DUT sta mode, when tcp/udp stream between sta and PC ethernet at same
subnet, dst mac addr of each tx skb is not bssid, but ethernet mac of the
PC. Since only self peer and bssid peer are created on DUT, the ethernet
mac addr of the PC can't be found from peer list at all by
ol_txrx_peer_find_hash_find_get_ref, ol_txrx_peer_get_ref_by_addr and
ol_txrx_get_vdev_by_peer_addr return NULL. For each tx skb, 2 txrx log
will print and be saved to storage by cnss_diag, throughput is impacted
and LEGACY_TX_FLOW_CONTROL doesn't work too.
Fix: In sta mode, use connected bssid to find dp peer and vdev.
Log sample:
18769633: [soft_i][0x650c858e][08:11:05.109017]wlan: [0:IH:TXRX] PDEV
not found for peer_addr:a0:36:9f:21:18:88
18769633: [soft_i][0x650c85b3][08:11:05.109019]wlan: [0:IH:TXRX]
ol_txrx_get_tx_resource: Invalid peer address: a0:36:9f:21:18:88
Change-Id: Ib87bbe5cbb1c8d0aa31d06b32dc98d9b3b9456b3
CRs-Fixed: 2715377
Add support to enable or disable GRO per adapter at
runtime based on the ingress qdisc registered for the
net device. Disable GRO when ingress qdisc is configured
and enable GRO when there is no ingress qdisc configured.
Change-Id: Ie9ced2c92d176c040bc44da4cee93db55c6a335a
CRs-Fixed: 2739414
Check the required security types allowed for 6GHz connection and
do not allow the connection if the secutiry check fails.
Change-Id: Ic680c4600b3f17151e42f8708ff8810e5d16e52e
CRs-Fixed: 2715086
It starts spectral scan without vdev object, and uses the first vdev
as current vdev. which cause vdev mismatch in some platform. So pass
vdev object when starting spectral scan.
Change-Id: I7571d2f3716079969de872372779aa28d60c82ce
CRs-Fixed: 2716454
Add new channel 177 to wiphy struct ieee80211_channel
hdd_etsi13_srd_ch and rename the struct to
hdd_5dot9_ghz_ch.
Add a new ini fcc_5dot9_ghz_chan_in_master_mode to
enable/disable new 5.9 GHz channels 169, 173 and 177
in master mode.
Change-Id: I68dc3be18277ca0e416a579327f406279458899e
CRs-Fixed: 2693707
Remove the support of BLM in case of assoc
comeback assoc reject as anyway the driver
retries the assoc again after a specific time.
Change-Id: I8b49472d59ab8d41f591159cbf897b2e8c7e877c
CRs-Fixed: 2738544
Add sanity check on head_skb->data_len, head_skb->data_len should be
equal to equal to sum of all frag_skb->len. Assert and drop such invalid
length skb aggregate.
Change-Id: Ie6d2eea1b41fbb2909d34d18d0629844b4be9af3
CRs-Fixed: 2728294
