Commit Graph

1160 Commits

Author SHA1 Message Date
Linus Torvalds
e0a515bc6a Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: update cell_defconfig
  [PATCH] spufs: Disable local interrupts for SPE hash_page calls.
  [PATCH] powerpc: Add cputable entry for POWER6
  [PATCH] ppc32 CPM_UART: Fixed odd address translations
  [PATCH] ppc32: Update board-specific code of the CPM UART users
  [PATCH] ppc32 CPM_UART: Convert to use platform devices
  [PATCH] ppc32: odd fixes and improvements in ppc_sys
  [PATCH] powerpc: Wire up *at syscalls
  [PATCH] ppc32: add 440GX erratum 440_43 workaround
  [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.
  [PATCH] powerpc64: Fix loading of modules without a .toc section
  [PATCH] sound/ppc: snd_pmac_toonie_init should be __init
  powerpc/pseries: Tell firmware our capabilities on new machines
  [PATCH] powerpc: Fix pagetable bloat for hugepages
2006-04-29 17:07:03 -07:00
Adrian Bunk
1d3d1d3e03 [PATCH] re-add the OSS SOUND_CS4232 option
A regression in the ALSA driver compared to the OSS driver was reported as
ALSA bug #1520, so let's keep the OSS driver for now.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28 08:33:46 -07:00
Andreas Schwab
d882995c05 [PATCH] sound/ppc: snd_pmac_toonie_init should be __init
snd_pmac_toonie_init is only called by __init code and calls __init code
itself.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:04:30 +10:00
Linus Torvalds
6b426e785c Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  [PARISC] MAINTAINERS
  [PARISC] Make ioremap default to _nocache
  [PARISC] Add new entries to the syscall table
  [PARISC] Further work for multiple page sizes
  [PARISC] Fix up hil_kbd.c mismerge
  [PARISC] defconfig updates
  [PARISC] Document that we tolerate "Relaxed Ordering"
  [PARISC] Misc. janitorial work
  [PARISC] EISA regions must be mapped NO_CACHE
  [PARISC] OSS ad1889: Match register names with ALSA driver
2006-04-23 09:44:10 -07:00
Stuart Brady
e74eb808ba [PARISC] OSS ad1889: Match register names with ALSA driver
Signed-off-by: Stuart Brady <sdb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-04-21 22:20:31 +00:00
Benjamin Herrenschmidt
4d6c58899c [PATCH] powerpc: fix oops in alsa powermac driver
This fixes an oops in 2.6.16.X when loading the snd_powermac module. The
name of the requested module changed during the 2.6.16 development cycle
from i2c-keylargo to i2c-powermac.

Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-21 22:34:26 +10:00
Adrian Bunk
46539264df [PATCH] make the OSS SOUND_VIA82CXXX option available again
There was a report of a regression in the ALSA driver for the same
hardware.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20 07:54:04 -07:00
Adrian Bunk
aafda4e0d0 [PATCH] update OBSOLETE_OSS_DRIVER schedule and dependencies
Update the schedule for the removal of drivers depending on
OBSOLETE_OSS_DRIVER as follows:

- adjust OBSOLETE_OSS_DRIVER dependencie
- from the release of 2.6.16 till the release of 2.6.17:
  approx. two months for users to report problems with the ALSA
  drivers for the same hardware
- after the release of 2.6.17 (and before 2.6.18):
  remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without
  known regressions in the ALSA drivers for the same hardware

Additionally, correct some OBSOLETE_OSS_DRIVER dependencies.
A rationale of the changes is in
  http://lkml.org/lkml/2006/1/28/135

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20 07:54:04 -07:00
Jon Masters
962f831f67 [PATCH] sound: fix hang in mpu401_uart.c
This fixes a hang in mpu401_uart.c that can occur when the mpu401 interface
is non-existent or otherwise doesn't respond to commands but we issue IO
anyway.  snd_mpu401_uart_cmd now returns an error code that is passed up
the stack so that an open() will fail immediately in such cases.

Eventually discovered after wine/cxoffice would constantly cause hard
lockups on my desktop immediately after loading (emulating Windows too
well).  Turned out that I'd recently moved my sound cards around and using
/dev/sequencer now talks to a sound card with a broken MPU.

This second version changes -EFAULT to -EIO and frees open resources on
error too.  Test booted and seems to work ok.

Signed-off-by: Jon Masters <jcm@jonmasters.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20 07:54:04 -07:00
Rene Herman
dcccdd938e [ALSA] unregister platform device again if probe was unsuccessful
Unregister the platform device again if the probe was unsuccessful.

This restores the behaviour of not loading the driver on probe() failure.

Signed-off-by: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:55:32 +02:00
Rene Herman
d0ac642d76 [ALSA] continue on IS_ERR from platform device registration
Continue with the next one on error from device registration.

This would seem the correct thing to do, even if it's not the probe()
error that we're getting.

Signed-off-by: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:55:30 +02:00
Adrian Bunk
12831c15f3 [ALSA] sound/core/pcm.c: make snd_pcm_format_name() static
Modules: PCM Midlevel

This patch makes the needlessly global snd_pcm_format_name() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:21 +02:00
Takashi Iwai
73864fc634 [ALSA] ac97 - Add entry for VIA VT1618 codec
Modules: AC97 Codec

Added the missing entry for VIA VT1618 codec.
No particular patch is needed, though.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:20 +02:00
Takashi Iwai
e092228313 [ALSA] hda-codec - Add support of ASUS U5A with AD1986A codec
Modules: HDA Codec driver

Add the model entry to support of ASUS U5A with AD1986A codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:18 +02:00
Eric Sesterhenn
2462321bfe [ALSA] Overrun in sound/pci/au88x0/au88x0_pcm.c
Modules: au88x0 driver

since idx is used as an index for vortex_pcm_prettyname[VORTEX_PCM_LAST],
it should not be equal to VORTEX_PCM_LAST. This fixes coverity bug id #572

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:17 +02:00
Dale Sedivec
99e80e4d0c [ALSA] au88x0 - clean up __devinit/__devexit
Modules: au88x0 driver

Removed all use of __devinit/__devexit and init.h from headers.  Any
attributes given in the prototype but not in the function definition have
been moved to the definition.

An exception is vortex_eq_free: I removed the __devexit attribute because
vortex_eq_free is called from vortex_core_shutdown, and
vortex_core_shutdown may be called from __devinit snd_vortex_create.

Compile tested with allyesconfig and allmodconfig.

Signed-off-by: Dale Sedivec <dale@codefu.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:15 +02:00
Ashley Clark
a29b6c8895 [ALSA] hda-codec - Adds HDA support for Intel D945Pvs board with subdevice id 0x0707
Modules: HDA Codec driver

This patch adds the entry for the 5-stack pin-config for the STAC
chip on the Intel D945Pvs board with subdevice id 0x0707.

With this patch against 1.0.11rc4 in the linux kernel 2.6.17-rc1, I'm
able to successfully output over the optical port and analog ports.

Signed-off-by: Ashley Clark <aclark@ghoti.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:13 +02:00
Coywolf Qi Hunt
be28e7ccd3 [ALSA] hda-codec - support HP Compaq Presario B2800 laptop with AD1986A codec
Modules: HDA Codec driver

This adds the support for HP Compaq Presario B2800 laptop with AD1986A codec.

Signed-off-by: Coywolf Qi Hunt <qiyong@freeforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:11 +02:00
James Courtier-Dutton
5b0e498537 [ALSA] emu10k1: Add some descriptive text.
Modules: EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2006-04-12 11:34:09 +02:00
Takashi Iwai
a26e9d9dc7 [ALSA] via82xx - Add a dxs entry for ECS K8T890-A
Modules: VIA82xx driver

Added a dxs_support entry for ECS K8T890-A board.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:07 +02:00
Takashi Iwai
f556e6f6ef [ALSA] hda-codec - Add another HP laptop with AD1981HD
Modules: HDA Codec driver

Added the SSID of another HP laptop for the model 'hp' with AD1981HD.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:06 +02:00
Takashi Iwai
1576274d30 [ALSA] Fix Oops of PCM OSS emulation
Modules: PCM Midlevel,ALSA<-OSS emulation

Fix Oops of PCM OSS emulation occuring when multiple playback is used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:04 +02:00
OGAWA Hirofumi
bbdc1b7dbe [ALSA] pcm_oss: fix snd_pcm_oss_release() oops
Modules: ALSA<-OSS emulation

Fix Oops due to a typo in snd_pcm_oss.c.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-12 11:34:01 +02:00
Tobias Klauser
56b146d36d [PATCH] Last DMA_xBIT_MASK cleanups
These are the last conversions of pci_set_dma_mask(),
pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK
constants from linux/dma-mapping.h

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:44 -07:00
Linus Torvalds
f27f0a045b Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits)
  [ALSA] Kconfig SND_SEQUENCER_OSS help text fix
  [ALSA] Add Aux input switch control for Aureon Universe
  [ALSA] pcxhr - Fix the crash with REV01 board
  [ALSA] sound/pci/hda: use create_singlethread_workqueue()
  [ALSA] hda-intel - Add support of ATI SB600
  [ALSA] cs4281 - Fix the check of timeout in probe
  [ALSA] cs4281 - Fix the check of right channel
  [ALSA] Test volume resolution of usb audio at initialization
  [ALSA] maestro3.c: fix BUG, optimization
  [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions
  [ALSA] AdLib FM card driver
  [ALSA] Fix / clean up PCM-OSS setup hooks
  [ALSA] Clean up PCM codes (take 2)
  [ALSA] Tiny clean up of PCM codes
  [ALSA] ISA drivers bailing on first !enable[i]
  [ALSA] Remove obsolete kfree_nocheck call
  [ALSA] Remove obsolete kfree_nocheck call
  [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
  [ALSA] Add snd-riptide driver for Conexant Riptide chip
  [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model
  ...
2006-04-02 13:08:49 -07:00
Frederik Deweerdt
c2f60c523a [ALSA] Kconfig SND_SEQUENCER_OSS help text fix
Fix misleading help text for SND_SEQUENCER_OSS config option.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Maximilian Rehkopf
af9b70ac00 [ALSA] Add Aux input switch control for Aureon Universe
This patch adds a mixer control which allows the user to switch the Aux
playback between the internal Aux jack, Wavetable, and Rear Line-In on
Aureon Universe cards.

For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052
(dual 4-way mux/demux) are used.  Output 0 and 1 of the PCA9554 are
connected to the select pins of the 74HC4052. The I2C interface of the
PCA9554 is connected to the card's internal SPI bus which is also used
to control the WM8770 and CS8415. SPI and I2C on the same lines...

To communicate with the PCA9554 the WM8770 and CS8415 are disabled and
an I2C Stop Condition is generated before the Start Condition (needed
for synchronisation because other SPI traffic appear to confuse the
PCA9554). Then a normal I2C data transfer takes place.  Programming must
be done ridiculously slow; in theory, 4.7us is the minimum delay time
for normal-speed I2C according to the datasheet, but even with 10us
switching was unreliable.  The Windows driver from Terratec does the
programming very slowly, too (checked with an oscilloscope).

PCA9554 datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf

74HC4052 datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf

Signed-off-by: Maximilian Rehkopf <otakon@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Markus Bollinger
0bd43b5bc9 [ALSA] pcxhr - Fix the crash with REV01 board
On a new board revision for pcxhr boards, the
PCXHR_CHIPSC_GPI_USERI bit is no more supported.
The cards concerned have a REV01 in their PCI ID.

As the current driver tests this bit and does not load the
first Xilinx binary when it's 1, the card will crash on Xilinx
access over PCI. (the PCI will freeze ....)

The fix (fix to version 1.0.11rc4) works for both REV00 and
REV01 cards.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
OGAWA Hirofumi
ce7415f496 [ALSA] sound/pci/hda: use create_singlethread_workqueue()
process_unsol_events() seems to assume a singlethread one (IOW, racey).
So, this patch uses create_singlethread_workqueue() instead of
create_workqueue().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Felix Kuehling
89be83f8ee [ALSA] hda-intel - Add support of ATI SB600
This patch adds support for high definition audio on ATI SB600.

Signed-off-by: Felix Kuehling <fkuehlin@ati.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Takashi Iwai
38223daa1a [ALSA] cs4281 - Fix the check of timeout in probe
Fix the check of timeout in probe routines to work properly
reagrdless of HZ (ALSA bug#1976).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Takashi Iwai
e860f00047 [ALSA] cs4281 - Fix the check of right channel
Fix the check of right channel in mixer volume put callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Takashi Iwai
14790f1c73 [ALSA] Test volume resolution of usb audio at initialization
Test the volume of usb audio whether actually it works and adjusts
the resolution value according to it.

Some USB audio devices report a lower resolution than it reacts.
The only possible check is to write and read a volume value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Andreas Mohr
0b2dcd5d6a [ALSA] maestro3.c: fix BUG, optimization
- fix brown-paper-bag locking bug (lock() / return / unlock())
- improve central function snd_m3_update_ptr()
  (avoid expensive integer divisions)
- add cpu_relax() to busy-wait I/O loop as recommended
  (does this require special macro support in ALSA for older kernels??)
- constify several structs
- spelling updates

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Jonathan Woithe
a1e8d2da03 [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions
The following patch relative to CVS from 20060324 adds the following
features to the Realtek HDA codec.

1) Define two new pin modes: ALC_PIN_DIR_IN_NOMICBIAS and
   ALC_PIN_DIR_INOUT_NOMICBIAS.  These can be used with jack mode switch
   definitions in mixers to prevent the user being offered the mic bias
   options if the hardware doesn't support it.

2) Add the ability to have different input mux definitions for different
   ADCs.  This is needed because the ALC260 chip uses different mux layouts
   for the two onboard ADCs.  A new field (num_mux_defs) was added to the
   alc_spec and alc_config_preset structures to support this.

3) Adjust numerous comments to make them consistent with the above changes.

4) Utilise the new multi-mux definition functionality for the ALC260 fujitsu
   model to allow recording of the mixer output.

5) Utilise the new multi-mux definition functionality for the ALC260 test
   model to make the mux selections a little less confusing.

6) Allow the headphone jack of the ALC260 acer model to be retasked in
   the mixer.

6) Utilise the new multi-mux definition functionality for the ALC260 acer
   model to give access to the mixer output and the retasked headphone
   jack.

At this stage the *_NOMICBIAS modes are not used.  We have reports that the
"Line" jack of at least some Acer models doesn't pass the bias out, and we
also know that NIDs 0x0f and 0x10 don't seem to accept the mic bias requests
at all.  However, I feel we need to collect more evidence on both counts
before committing to the use of *_NOMICBIAS.  In the case of the Acers, it's
not clear whether this issue (probably caused by the inclusion of DC
blocking capacitors) affects all Acer models or just a small number.  With
the issue with NIDs 0x0f and 0x10 it's unclear whether this is a hardware
bug which will be addressed in later chip revisions or if it's an
intentional restriction.  The datasheet makes no mention of the restriction
so at this stage I'm inclined to consider it a hardware bug.  Comments in
the source reflect this reasoning.

On a similar theme, the headphone jack of the Fujitsu S7020 also doesn't
appear to pass mic bias voltage.  I'm still investigating this however.

With the ability to retask the headphone jack, owners of ALC260-based Acer
laptops should now be able to record 4 channels of audio if they desire. The
multiple mux definitions allow this jack to be presented from both ADCs
(since this mux input is one of those which differs between the muxes).

This patch has been tested on a Fujitsu S7020 laptop and appears to behave
itself both for the "test" and "fujitsu" models.  Definitions using only a
single mux specification also work.  Other ALC chips should be fine but I
cannot test these myself.  The "auto" modes should also continue to function
but again I have not verified this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Rene Herman
cf40a310a7 [ALSA] AdLib FM card driver
Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is
just an OPL2, which was already supported by sound/drivers/opl3, so only
very minimal bus-glue is needed. The patch applies cleanly to both
2.6.16 and 2.6.16-mm1.

The driver has been tested with an actual ancient 8-bit ISA AdLib card
and works fine. It also works fine for an OPL3 {,emulation} as still
found on many ISA soundcards but given that AdLib cards don't have their
own mixer, upping the volume from 0 might be a problem without the card
driver already loaded and driving the OPL3.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
060d77b9c0 [ALSA] Fix / clean up PCM-OSS setup hooks
- Fix possible race of referring the setup hook from the running PCM
- Fix memory leak in an error path of proc write
- Clean up the setup hook parser

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
3bf75f9b90 [ALSA] Clean up PCM codes (take 2)
- Clean up initialization and destruction of substream instance
  Now snd_pcm_open_substream() alone does most initialization jobs.
  Add pcm_release callback for cleaning up at snd_pcm_release_substream()
- Tidy up PCM oss code

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
bf1bbb5a49 [ALSA] Tiny clean up of PCM codes
- Make snd_pcm_prepare() static
- Clean up snd_pcm_kernel_*_ioctl() functions, reduce exports

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Rene Herman
82756b2785 [ALSA] ISA drivers bailing on first !enable[i]
Fix the wrong check of enable option in cmi8330 driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Takashi Iwai
43560116d1 [ALSA] Remove obsolete kfree_nocheck call
Fixed the compilation, removing obsolete kfree_nocheck() call
for memory debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Takashi Iwai
10d150e186 [ALSA] Remove obsolete kfree_nocheck call
Fixed the compilation, removing obsolete kfree_nocheck() call
for memory debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Ash Willis
b3a70d5ece [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
Added snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
by Ash Willis.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Peter Gruber
109a9638f0 [ALSA] Add snd-riptide driver for Conexant Riptide chip
Add snd-riptide driver for Conexant Riptide chip by Peter Gruber.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
2125cad291 [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model
Fixed the noisy output wtih AD1986A 3stack model using 2 channels.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
505cb341ef [ALSA] hda-codec - Fix unsol event initialization at resume of stac92xx
Fix the re-initialization of unsolicited events at resume of stac92xx codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
675b4e5981 [ALSA] Make CONFIG_SND_CS46XX_NEW_DSP yes as default
Removed from CONFIG_EXPERIMENTAL from CONFIG_SND_CS46XX_NEW_DSP, and
make default to yes.  This option works fine for years.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Martin Langer
1841f613fd [ALSA] Add snd-miro driver
Added snd-miro driver for miroSOUND PCM by Martin Langer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai
cbac4b0cb6 [ALSA] Cleanup unused argument for snd_power_wait()
Removed the unused file argument of snd_power_wait().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Alan Horstmann
6285ae1df1 [ALSA] ice1712 - Fix wrong register value for DMX 6FIRE
I have just discovered I made an error in the register value set in 'Limit
dmx6fire to 6 dacs' patch (bug1472).  The value set should be '2a' not '0a'
as in the original patch, which unintentionally disables the 2nd MPU 401
UART.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00