Currently driver passes sta_id through out the call for getting the TSM
stats. Although passed, the sta_id is not used anywhere in the call
stack. As part of removing the sta_id usage, this sta_id can also be
removed safely.
Remove the usage of sta_id in get TSM stats path.
Change-Id: I1efbb1bfdc8df84e9b6a71dcd5bd39ea93ced21a
CRs-Fixed: 2484701
Increase the max number of MSDU in AMSDU limit to 15 and set the
default value to 0 to config the FW in auto mode selection in which
FW picks the maximum number of MSDUs in AMSDU based on connection mode.
Change-Id: I6c1f1292a31fc9ea857e60e7a81d10b6def5cbc1
CRs-Fixed: 2502544
Currently, the cdp API cdp_register_peer takes as input the sta_id. As a
part of cleaning up the usage of sta_id, replace it by peer mac address.
Change-Id: I0e92258777aff02940dd619c4d2ad784aa3e7f31
CRs-Fixed: 2502996
Cleanup ol_txrx_register_peer to be peer mac address based
from local peer id based.
Change-Id: I59fd19c0185d8fe89563ac78bc9e8a8117c12ed1
CRs-Fixed: 2503182
In standard linux kernel, struct dma_iommu_mapping is not defined for
arm64, while in qualcomm linux kernel, struct dma_iommu_mapping is
defined for arm and arm64.
To fix build error in standard linux kernel, use struct dma_iommu_mapping
only when ENABLE_SMMU_S1_TRANSLATION is defined.
Change-Id: Ib02073163f2a38c47f864c6592fe2470046868ce
CRs-Fixed: 2496733
Currently, the IPA AIP ucfg_ipa_wlan_evt takes as input the sta_id. As a
part of cleaning up the usage of sta_id, remove the parameter. Since
mac_addr is already present in the list of parameters, no need to add.
Change-Id: Iacc4a05de88973014eb4bcc1dfc97b7dc4a0d4fa
CRs-Fixed: 2503944
Currently driver passes sta_id through out the call for getting the SNR
stats. Although passed, the sta_id is not used anywhere in the call
stack. As part of removing the sta_id usage, this sta_id can also be
removed safely.
Remove the usage of sta_id in get SNR stats path.
Change-Id: I39482d8f6d8e3bd32e940a85d5592dada8f0460b
CRs-Fixed: 2503956
Currently the function hdd_get_peer_idx is not being called from
anywhere. As the use of sta_id is being depreceted, the function can be
safely removed.
Clean up the unused function.
Change-Id: I6896d03ad2e8b427147e2259b737836cd3f44ca0
CRs-Fixed: 2484699
When FEATURE_WLAN_AP_AP_ACS_OPTIMIZE enabled, it will allocate
memory in INIT domain (wlan_hdd_startup), and free in ACTIVE
domain (hdd_wlan_exit).
Move to wlan_hdd_start_modules/wlan_hdd_stop_modules to avoid.
Change-Id: I0fd93baa306a136af2faa7af9dcccfb709984ef9
CRs-Fixed: 2505462
If firmware doesn't support 5GHz band then ieee80211_supported_band
structure for HDD_NL80211_BAND_5GHZ is not allocated in wiphy and in
wlan_hdd_update_ht_cap() trying to derefer member-fields of
ieee80211_supported_band[HDD_NL80211_BAND_5GHZ] without NULL check is
causing NULL pointer exception.
To address this, add NULL check for 2GHz and 5GHz band pointers.
Change-Id: I8aa93b9cbe26ce674563505e222f5cb2aa970051
CRs-Fixed: 2503133
Remove operationChannel from structure csr_roam_profile, remove
the code where value assigning to operationChannel take place.
Change-Id: If7cd64d4d7513000181f92faabd6c863341c71f9
CRs-Fixed: 2503043
1) Remove channel from struct hdd_mon_set_ch_info. All client
code will use freq within the same struct from now on.
2) Replace the usage of channel ID(op_chan) with channel
frequency(op_freq) in function hdd_mon_select_cbmode's
parameter list.
3) Fix a number of camel cases detected in function
hdd_select_cbmode.
Change-Id: Ib7c1ee453b34647e983749a713b33017b92103ac
CRs-Fixed: 2504779
After got restart channel rsp from fw, vdev state will change
as: ST-RESTART_PROG->ST-CONN_PROG.
In lim_send_sme_ap_channel_switch_resp, if channel is non-dfs,
vdev state will change to up; if dfs channel, later it will
change to DFS CAC when starting cac timer.
Current issue is if there is ap stop after restart channel rsp,
while processing WLAN_VDEV_SM_EV_DOWN, there is no hanler in
ST-CONN_PROG > ST-DISCONN_PROG.
From design perspective, In SAP, ST_CONN_PROG is a dummy state,
ideally, SAP state should change as below without preemption :
RESTART_PROGRESS->CONN_PROGRESS->UP
RESTART_PROGRESS->CONN_PROGRESS->DFS_CAC_WAIT
To fix issue, change vdev state to DFS_CAC_WAIT in
lim_send_sme_ap_channel_switch_resp; So WLAN_VDEV_SM_EV_DOWN will
be handled in DFS_CAC_WAIT state.
At the same time, set DFS_CAC_WAIT when starting SAP, and clear
sap_move_to_cac_wait_state in sap state machine.
Change-Id: Iee89521471e456a553f40577da6d1e69aef3b803
CRs-Fixed: 2501339
Currently the driver choses a default channel for SAP
in case of failures, logic of which is incorrect as
it does not take into account the hw mode, and all
other checks such as SRD, unsafe, DFS etc.
The channel chosen after this maybe not as per
expectation.
Fix is to chose a default channel from the acs channel
list itslef so that the checks of SRD etc. ae honored.
Change-Id: Ife8a6b88938fd566bed92a5bde1cb0fe34a45462
CRs-Fixed: 2476351
Currently the driver sends the CSA IEs in the
beacon every beacon interval, and updates the
CSA IE count in every beacon.
If the wlan gets suspended in between the
updation of CSA IEs, the CSA is delayed
till the next resume, which could lead to
STA kickout event, if there is delay between
the CSA period, and the channel switch time.
Fix is to take a wakelock till CSA is completed
in order to avoid the STA kickout.
Change-Id: Iff03476433c755cbddc7568ffbd24ddb81fd1c90
CRs-Fixed: 2504039
Currently the driver checks whether the device
supports antenna sharing, and if the AP is added
in the OUI framework, then the driver modifies the
nss value to 1 to avoid sending SMPS to the peer AP.
Now suppose the device does not support Antenna sharing,
but supports DBS and is helium HW, then going to DBS HW
mode would result in peer sending a SMPS frame to the peer
as the helium HW only has two antennas, and one is needed
by each MAC now.
Fix is to add a third param in force 1x1 ini which would
decide the driver should consider the antenna sharing as
mandatory or not.
Change-Id: I3ae00fcbd642c7780952d66ccbf1208335fcb077
CRs-Fixed: 2496831
After sending the wmi_peer_delete command to FW. If there
is a change in channel info of HT cap from connected AP.
Then TDLS peers in lim will be deleted and dph entry will be
freed.
While processing the tdls del sta response from FW
if dph entry is NULL then WLAN_SER_CMD_TDLS_DEL_PEER is
not released and that can lead to active command timeout.
Release the serialization command in case of NULL dph entry.
Change-Id: Ib56806875cc84a0ecb9bcab16e9e0bb9d118efbb
CRs-Fixed: 2503993
Check if the configured tdls offchannel through IOCTL
is supported or not. This is required if firmware
does not support 5G channels or any invalid channels
Change-Id: I49e3b7b758fddf22fbfe1b64dda2e4f47a27cf3b
CRs-Fixed: 2503913
On wlan suspend, kck sent as part of gtk offload request
is not populated properly since the kck_len is not
updated when caching the gtk request resulting in all
zeroes kck.
Fix is to update kck_len when saving gtk offload
request.
Change-Id: I9e4430565a04cff6da7f06d23a9542a2f53568b0
CRs-Fixed: 2502131
Currently the driver sends a unicast probe request
to the BSSID which is blacklisted, which in turns
violate the SPEC, as the BSSID maybe rejected as
part of OCE assoc reject.
Fix is to check if the BSSID is blacklisted, don't
go for unicast probes.
Change-Id: I14f283d7425d40706cef29db38b48333ee9a7fff
CRs-Fixed: 2500273
If no channel is found suitable for ACS, don't scan
all the channels as done currently by the driver, and
send ACS fail code to the userspace as SAP cannot be
started on the band specified by the use.
Change-Id: I18edff6aaf384384841487d06474fd5fba28fc2f
CRs-Fixed: 2476347
Currently for NDI interface bus bandwidth timer is not
started. As part of this change start the timer when new
ndp peer is created and stop the timer when last ndp peer
connected is deleted.
Change-Id: Ia710ec9872636ee3cefa30815692c2f8c9816687
CRs-Fixed: 2499548
Fix the compilation issues passing proper parameter to the function
wmi_unified_thermal_mitigation_param_cmd_send.
CRs-Fixed: 2501080
Change-Id: I9ce0038ef2844536612f0bf71314dbc214f354d9
