Commit Graph

40 Commits

Author SHA1 Message Date
Linus Torvalds
94e0fb086f Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits)
  drm/i915: Handle ERESTARTSYS during page fault
  drm/i915: Warn before mmaping a purgeable buffer.
  drm/i915: Track purged state.
  drm/i915: Remove eviction debug spam
  drm/i915: Immediately discard any backing storage for uneeded objects
  drm/i915: Do not mis-classify clean objects as purgeable
  drm/i915: Whitespace correction for madv
  drm/i915: BUG_ON page refleak during unbind
  drm/i915: Search harder for a reusable object
  drm/i915: Clean up evict from list.
  drm/i915: Add tracepoints
  drm/i915: framebuffer compression for GM45+
  drm/i915: split display functions by chip type
  drm/i915: Skip the sanity checks if the current relocation is valid
  drm/i915: Check that the relocation points to within the target
  drm/i915: correct FBC update when pipe base update occurs
  drm/i915: blacklist Acer AspireOne lid status
  ACPI: make ACPI button funcs no-ops if not built in
  drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks
  drm/i915: intel_display.c handle latency variable efficiently
  ...

Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-24 10:30:41 -07:00
Jesse Barnes
7e12715ecc ACPI button: provide lid status functions
Some drivers need to know when a lid event occurs and get the current
status.  This can be useful for when a platform firmware clobbers some
hardware state at lid time, and a driver needs to restore things when
the lid is opened again.

Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-10 16:09:11 -07:00
Len Brown
a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Bjorn Helgaas
d68b597c88 ACPI: button: remove control method/fixed hardware distinctions
This patch removes the driver distinction between control method (CM)
and fixed hardware (FF) buttons.  We previously needed that so we
could install either a fixed event handler or a notify handler, but
the Linux/ACPI code now handles that for us, so we don't need to
worry about it.

Note that this removes the FF/CM annotation from the "info" files
in /proc.  For example,

    /proc/acpi/button/PWRF/info:
    -type:		Power Button (FF)
    +type:		Power Button

I don't think there's anything meaningful user-space can do by
knowing whether a button is a control method or a fixed hardware
button, so nobody should be looking at the FF/CM.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:41 -04:00
Bjorn Helgaas
106c19e7b9 ACPI: button: remove button->device pointer
We no longer need a pointer from struct acpi_button back to the
struct acpi_device.  Everywhere we used that pointer, we either
already have, or can easily get, the acpi_device pointer without
using the copy from acpi_button.  So this patch removes the
structure element.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas
bf04a77227 ACPI: button: cache hid/name/class pointers
This patch adds temporaries to cache the acpi_device_hid(),
acpi_device_name(), and acpi_device_class() pointers so we
don't have to clutter the code with so many uses of those
interfaces.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas
1bce81131c ACPI: button: use Linux style for getting driver_data
It's typical and slightly more compact to look up the driver_data
structure by initializing the automatic variable at its definition.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas
e2fb9754d2 ACPI: button: remove unnecessary null pointer checks
Better to oops and learn about a bug than to silently cover it up.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas
50a4da8901 ACPI: button: whitespace changes
This patch changes a bit of whitespace to follow Linux conventions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas
373cfc360e ACPI: button: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Note that events from fixed hardware buttons now show up as a special
notify event, so to preserve user-space backward compatibility, we
convert that back to ACPI_BUTTON_NOTIFY_STATUS.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:25:07 -04:00
Alexey Dobriyan
99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Len Brown
d1876ba4de Merge branch 'ec' into release 2008-11-11 21:17:26 -05:00
Alexey Starikovskiy
0b7084ac67 ACPICA: Use spinlock for acpi_{en|dis}able_gpe
Disabling gpe might interfere with gpe detection/handling,
thus producing "interrupt not handled" errors.
Ironically, disabling of GPE from interrupt context is already
under spinlock, so only userspace needs to start using it.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:35:42 -05:00
Bjorn Helgaas
89595b8f28 ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h
Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:44:37 -05:00
Guillem Jover
df316e9391 ACPI: Always report a sync event after a lid state change
Currently not always an EV_SYN event is reported to userland
after the EV_SW SW_LID event has been sent. This is easy to verify
by using “input-events” from input-utils and just closing and opening
the lid.

Signed-off-by: Guillem Jover <guillem.jover@nokia.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-25 04:07:12 -04:00
Len Brown
7674416db4 Merge branch 'ull' into test
Conflicts:
	drivers/acpi/bay.c
	drivers/acpi/dock.c
	drivers/ata/libata-acpi.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22 23:33:29 -04:00
Matthew Wilcox
27663c5855 ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernels
As of version 2.0, ACPI can return 64-bit integers.  The current
acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms.
Change the argument to take a pointer to an acpi_integer so we support
64-bit integers on all platforms.

lenb: replaced use of "acpi_integer" with "unsigned long long"
lenb: fixed bug in acpi_thermal_trips_update()

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11 02:47:33 -04:00
Pavel Machek
db89b4f0db ACPI: catch calls of acpi_driver_data on pointer of wrong type
Catch attempts to use of acpi_driver_data on pointers of wrong type.

akpm: rewritten to use proper C typechecking and remove the
"function"-used-as-lvalue thing.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10 18:05:53 -04:00
Denis V. Lunev
cf7acfab03 acpi: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to proc_fops to fix reading/module unloading race.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Andrey Borzenkov
3b34e5232f ACPI: button: make real parent for input devices in device tree
Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 13:38:49 -04:00
Alexey Starikovskiy
23de5d9ef2 ACPI: button: send initial lid state after add and resume
Input layer should know about initial state of lid switch,
even before first notify.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=326814

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25 16:31:30 -04:00
Jiri Slaby
7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
Len Brown
14e04fb34f ACPI: Schedule /proc/acpi/event for removal
Schedule /proc/acpi/event for removal in 6 months.

Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event()
to make sure there is no confusion that it is for /proc/acpi/event only.

Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event.
There is no functional change if CONFIG_ACPI_PROC_EVENT=y

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 15:20:26 -04:00
Thomas Renninger
1ba90e3a87 ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:56:42 -04:00
Len Brown
7cda93e008 ACPI: delete extra #defines in /drivers/acpi/ drivers
Cosmetic only.

Except in a single case, #define ACPI_*_DRIVER_NAME
were invoked 0 or 1 times.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:50:52 -05:00
Len Brown
c2b6705b75 ACPI: fix acpi_driver.name usage
It was erroneously used as a description rather than a name.

ie. turn this:

lenb@se7525gp2:/sys> ls bus/acpi/drivers
ACPI AC Adapter Driver  ACPI Embedded Controller Driver  ACPI Power Resource Driver
ACPI Battery Driver     ACPI Fan Driver                  ACPI Processor Driver
ACPI Button Driver      ACPI PCI Interrupt Link Driver   ACPI Thermal Zone Driver
ACPI container driver   ACPI PCI Root Bridge Driver      hpet

into this:

lenb@se7525gp2:~> ls /sys/bus/acpi/drivers
ac  battery  button  container  ec  fan  hpet  pci_link  pci_root  power  processor  thermal

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:33:40 -05:00
Len Brown
f52fd66d2e ACPI: clean up ACPI_MODULE_NAME() use
cosmetic only

Make "module name" actually match the file name.
Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care.
Fix indentation where Lindent did get confused.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 22:42:12 -05:00
Len Brown
975a8e3ed2 Pull sysfs into test branch
Conflicts:

	Documentation/feature-removal-schedule.txt
	include/acpi/acpi_drivers.h

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-03 01:14:35 -05:00
Alexey Starikovskiy
bfd80223d7 ACPI: correct id for fixed buttons
ACPI_BUTTON_HID_POWERF was changed, but this change was not propogated to
button.c, thus breaking detection of fixed power and sleep buttons.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-01 02:12:52 -05:00
Dmitry Torokhov
c0968f0ea2 ACPI: button: register with input layer
In addition to signalling button/lid events through /proc/acpi/event,
create separate input devices and report KEY_POWER, KEY_SLEEP and
SW_LID through input layer.  Also remove unnecessary casts and variable
initializations, clean up formatting.

Sleep button may autorepeat but userspace will have to filter duplicate
sleep requests anyway (and discard unprocessed events right after
wakeup).

Unlike /proc/acpi/event interface input device corresponding to LID
switch reports true lid state instead of just a counter. SW_LID is
active when lid is closed.

The driver now depends on CONFIG_INPUT.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-11-09 03:20:19 -05:00
Arjan van de Ven
d75080328a ACPI: add 'const' to several ACPI file_operations
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-10 00:04:29 -04:00
Patrick Mochel
6c68953772 ACPI: button: Remove unneeded acpi_handle from driver.
Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 02:50:47 -04:00
Patrick Mochel
27b1d3e85b ACPI: button: Use acpi_device's handle instead of driver's
Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 02:42:05 -04:00
Patrick Mochel
d550d98d33 ACPI: delete tracing macros from drivers/acpi/*.c
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27 00:41:40 -04:00
Len Brown
6468463abd ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27 00:01:06 -04:00
Thomas Renninger
a6fc67202e ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUG
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26 23:58:43 -04:00
Len Brown
4be44fcd3b [ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:45:14 -04:00
Alexey Starikovskiy
b34a8030ee [ACPI] restore /proc/acpi/button/ (ala 2.6.12)
Signed-off-by Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by Len Brown <len.brown@intel.com>
2005-08-03 17:57:24 -04:00
Alexey Starikovskiy
bd4698dad3 [ACPI] Allow simultaneous Fixed Feature and Control Method buttons
delete /proc/acpi/button

http://bugzilla.kernel.org/show_bug.cgi?id=1920

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:17:07 -04:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00