For now IPA SMMU can only work on ICNSS platform.
Add support for IPA SMMU feature on CNSS platform.
CRs-Fixed: 2286287
Change-Id: I6515d6ec764659f1aeefa50d9fd0b120c47b36bf
pld_snoc_get_soc_info() stack allocates a icnss_soc_info struct before
populating its contents via a call to icnss_get_soc_info(). However,
icnss_get_soc_info() may not populate all of the fields of the struct.
Zero-initialize the struct before passing it to icnss_get_soc_info() to
avoid using any uninitialized values.
Change-Id: I859a880c9fb8483b66e17ded2857634ab878977a
CRs-Fixed: 2396653
A bus can have multiple sub interfaces or pipes.
USB bus for example has endpoints grouped into interfaces.
WLAN uses one of these interfaces.
Each interface has its own "struct device". Add support to save
and retrieve this "struct device".
Also pass interface dev to pld_usb_wlan_enable() as CNSS expects
interface device.
Change-Id: I5800bde107157c35efed848a23b95696bd7f793a
CRs-Fixed: 2371440
Without CNSS module, function pld_pcie_get_user_msi_assignment return zero
even no msi config. For caller function pld_get_user_msi_assignment, zero
means TRUE. It will result to panic when deinit sequence called in
function hif_ce_srng_msi_free_irq. Return correcly value to avoid panic.
Change-Id: Id4480ef1db5357943162472963c4e78d7bfe64b8
CRs-Fixed: 2373130
Currently MAC addresses are generated by driver only.
MAC addresses are queried from platform driver or wlan_mac.bin.
If platform driver gives mac addresses, driver uses it, else it
will use wlan_mac.bin to update MAC addresses. If wlan_mac.bin also
don't have MAC addresses then random MAC addresses are generated
using the HW address or using device serial number.
Add an ini support to enable MAC provisioning. If MAC provisioning
is enabled, ensure that platform driver provides atleast 2 provisioned
MAC addresses. Query the derived addresses also from platform driver.
Generate the remaining random MAC addresses.
Change-Id: Ib943f9de70a78ba5d5e87d81c76b20341893f8e9
CRs-Fixed: 2153836
Currently, driver without CNSS module can't be unloaded when firmware
crashed. Without CNSS module, driver should set recovery in progress
flag to false when fw dump finished or failed. Driver should add ramdump
memory address and length too.
Change-Id: I672c50bd90ada7ff47ddff64ff3b313a75faff13
CRs-Fixed: 2343124
The platform driver uevent handling in WLAN handles both the firmware-
down and "recovery" events. However, the recovery event on snoc
platforms is actually the firmware-crashed event. Recovery _is_ a valid
uevent for pcie platforms, but I20db3698602ea273038a3f024b4e5f61639f6d74
is adding support for the firmware down event.
Additionally, there is no good reason to handle both events, and the
various handling logics are spread across both events with little rhyme
or reason. Remove handling of the "recovery" platform uevent, and move all
associated logic to the firmware-down uevent handling.
Change-Id: I36b6f607438c930dff1936f372af80be311dfe49
CRs-Fixed: 2339357
The snoc wlan platform driver supports snoc API with
the device pointer in all upstream kernel, So remove
the redundant snoc APIs from the pld layer.
CRs-Fixed: 2173110
Change-Id: Iee8bce586569e135da81f9a465a9e7df8b042af4
When the firmware crashes platform driver notifies the driver
through CNSS_FW_DOWN. Since firmware down support is not
present for the PCI bus, The driver flags for target ready
and recovery flags are not getting set resulting in the commands
sent to firmware.
Add the firmware down support for the pci bus.
Change-Id: I20db3698602ea273038a3f024b4e5f61639f6d74
CRs-Fixed: 2338570
As part of PCIe power management for new WLAN devices, it requires
asserting WAKE register before accessing any MMIO registers outside
first 4K range. Add the APIs support in PLD for WLAN host driver.
Change-Id: I307cc6688fca58a52a6eaf3982d675c7a85a6965
CRs-fixed: 2326459
Upon driver reinitialize after a FW rejuvenate,
data packets are not going through IPA path.
Check for FW rejuvenate scenario during driver
recovery and send appropriate message to IPA
driver.
Change-Id: I8c1d7ba78227684cd5653a5927aa4d4c2ce5d354
Crs-Fixed: 2287293
Currently, driver don't fully support MULTI_IF_NAME when two wlan
cards are supported by using two drivers:
1. if two wlan cards are all PCIe, driver can't distinguish
two PCIe cards firmware path.
2. When create hdd sysfs file upper folder, it will repeatly create the
same folder if not use MULTI_IF_NAME to distinguish them. It's not
necessary to distinguish the sub-folder once upper folder is different.
Change-Id: I511de46eec98e736d4e97d5c94ab22592d33f347
CRs-Fixed: 2311137
If modem crashed during wlan driver unloading, icnss driver
will call driver uevent callback to set FW down status in
driver side when it receives BEFORE_SHUTDOWN notification.
If wlan driver is de-initialized just before the callback
is called, kernel will panic as driver's context is freed.
This can be avoid by not setting FW status in host driver.
Instead, icnss driver provides an API to host driver to
check FW status and host driver calls this API before any timeout
assert or accessing HW registers.
CRs-Fixed: 2161431
Change-Id: I8331367dd41dd0cedfa65c63f1bb3ffcb535e1c9
Unregister with usb stack if probe fails.
Not doing so was causing a kernel panic the next time
WLAN device was enumerated.
Change-Id: Ieeeca485774b41156f5587feaa4f7482746f6650
CRs-Fixed: 2263482
Adds support in pld_usb.c for registering with CNSS driver.
pld_usb can now register directly with Linux USB stack or with
CNSS driver.
For QCN7605, registration is to be done with CNSS.
Change-Id: Ibf7e51679e1848bcd8e1acfa43c457f42ff40c0b
CRs-Fixed: 2269602
Update pld soc info by structure member to decouple between pld soc info
with platform soc info.
Change-Id: I0e62d4784d7bccfb2f08d3678e1c78e6baaa9ca9
CRs-Fixed: 2268191
Fix compilation error while enabling QCA_WIFI_3_0_ADRASTEA
and CONFIG_CNSS2 flag for Genoa.
Change-Id: Ic44da39377f722c19edcd291d1b35fac1fee9462
CRs-Fixed: 2267927
When loading sdio driver, need make sure sdio device is recognized,
break driver loading if no device.
Change-Id: I4d47575d793b58970012e4e47cc63b0c197f565d
CRs-Fixed: 2245495
Address the following issue in the core/pld folder:
CHECK: 'bandwith' may be misspelled - perhaps 'bandwidth'?
Change-Id: Ic397c156ff7ba32cec590083098474af16569ea7
CRs-Fixed: 2241943
Qcacld supports multiple driver modules instance generation with
different file names and Kbuild options. Fix driver load time and
compilation errors on this feature.
Change-Id: Ib405e6c475bace31933a28dc64082f2b6c046da9
CRs-fixed: 2197749
Target register is safe to access only after FW ack the wlan
enable request, which is done in hif_enable. Hence set FW ready
state after that.
Change-Id: Ieeb7dd3e1a2400c7b2568869ac27cf7f745c20d5
CRs-Fixed: 2167736
Add device pointer in all PLD PCIe APIs in order to support
numerous WLAN devices.
Change-Id: Id9b2fb14ef3de715f6127ac2301d7ad87d493c14
CRs-fixed: 2134245
These APIs are used with legacy platform driver for PCIe bus based
targets which are no longer needed for new platform driver.
Change-Id: I6e01ea632e902f2c0a3a7cde07c85dfa835b84d3
CRs-fixed: 2134245
FW ready state guarantees the completion of 2nd stage power on
reset sequence of wcn3990 target.
Add fw ready uevent to update driver state, which is required
to check if target registers are accessible or not, while
recovery is in progress.
Change-Id: I78d56644d4d4ac3a0371be625a2debed8ac7cebf
CRs-Fixed: 2058451
WLAN self-recovery based on SDIO bus is currently missing in
CLD3.x, resulting in crash injection to TF card taking no
effect during some special case.
Add the recovery feature back to CLD3.x based on the same
logics in CLD2.0
Change-Id: I719b77ac9679a0449863a94b47ad22233bc9b574
CRs-fixed: 2103969
When uevent is introduced for integrated devices, it breaks
the PLD handling for PCIe devices. Hence correct it by using
proper enum.
Change-Id: Iacb5037932065f1822c1408d74f8aa3824ff0e71
CRs-fixed: 2114385
Enable support to use SKB Buffers allocated during bootup for
low memory targets.
CRs-Fixed: 2106466
Change-Id: Ia55c38767804c5915b9d29d3c61bff236d12cacd
Currently, cds_trigger_recovery is unconditional. Instead, avoid
triggering recovery if recovery is already in progress.
Change-Id: I5c77048701930591e0e520e07275e6f8631108a0
CRs-Fixed: 2070845
Remove unused APIs from PLD. These APIs are already replaced by
WLAN common utility APIs.
CRs-Fixed: 2093939
Change-Id: I187826e7433e93361e1e4d42c081cc2f31b661b3
Skip FW memory dump in SSR case for HL SDIO solution.
HL SDIO uses the diag read API to read by 4 bytes,
which is too slow to meet SSR time requirement.
Change-Id: Iacde90ab0ec84f29f3744bf4497ec8fd8517600a
CRs-Fixed: 2071329
Add the interface that host driver can trigger FW assert and do
recovery for QCA6290.
Change-Id: I03a9c374fd2ddc5cc46b9b0a98ce05bcf80a53ec
CRs-fixed: 2068035
Use cnss_utils APIs to set/get wlan info as these APIs are platform
independent.
CRs-Fixed: 2071683
Change-Id: Ia35a648a1d4dff308b830bce3b4e9992de2a2834
If platform has a mechanism to initiate target assert, trigger
that interface to force assert target. Certain integrated platforms
(where WLAN runs on it's own PD) provides a mechanism to initiate PDR
from host. That interface can be triggered when WLAN host detect
timeout scenarios.
CRs-Fixed: 1110243
Change-Id: I6a9408f47ca4245380dbf4177363c3c461ff948d
In function pld_pcie_uevent, pld_context->ops->uevent NULL check logic
is wrong so correct it.
Change-Id: I1bf9d8c8f5318b476761a458f5475107007dfa01
CRs-Fixed: 2058248
For TF sdio chip with platform driver, ramdump is
configured in platform driver. Driver can get the
virtual memory, but it can't call ioremap again.
If there is a platform driver, ramdump should be
allocated in platform driver, and if there is no
platform driver, ramdump should be allocated in
driver.
CRs-Fixed: 2066529
Change-Id: Ia2a32a4895f354e365522a30bbfac949ccb7a391
When FW assert happen, it won't do FW dump
if the bus type is SDIO.
Enable FW dump for SDIO target
Change-Id: I24655ca74003c915d9eda1106aad7cf87856947e
CRs-Fixed: 2010613
