architecture.
This should fix the longstanding issues with xfs and old ABI arm boxes,
which lead to various asserts and xfs shutdowns, and for which an
(incorrect) patch has been floating around for years.
I've verified this patch by comparing the on-disk structure layouts using
pahole from the dwarves package, as well as running through a bit of xfsqa
under qemu-arm, modified so that the check/repair phase after each test
actually executes check/repair from the x86 host, on the filesystem
populated by the arm emulator. Thus far it all looks good.
There are 2 other structures with extra padding at the end, but they don't
seem to cause trouble. I suppose they could be packed as well:
xfs_dir2_data_unused_t and xfs_dir2_sf_t.
Note that userspace needs a similar treatment, and any filesystems which
were running with the previous rogue "fix" will now see corruption (either
in the kernel, or during xfs_repair) with this fix properly in place; it
may be worth teaching xfs_repair to identify and fix that specific issue.
SGI-PV: 982930
SGI-Modid: xfs-linux-melb:xfs-kern:31280a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the generic set, get and removexattr methods and supply the s_xattr
array with fine-grained handlers. All XFS/Linux highlevel attr handling is
rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so
that it's separated from the generic low-level code.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31234a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The vfs_unlink/d_delete functionality in the Linux VFS make the
dentry negative if it is the only inode being referenced. Case-insensitive
mode doesn't work with negative dentries, so if using CI-mode, invalidate
the dentry on unlink/rmdir.
SGI-PV: 983102
SGI-Modid: xfs-linux-melb:xfs-kern:31308a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which
intenally call directory format specific lookup funtions that assume
args->cmpresult is zeroed.
SGI-PV: 982606
SGI-Modid: xfs-linux-melb:xfs-kern:31268a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Implement ASCII case-insensitive support. It's primary purpose is for
supporting existing filesystems that already use this case-insensitive
mode migrated from IRIX. But, if you only need ASCII-only case-insensitive
support (ie. English only) and will never use another language, then this
mode is perfectly adequate.
ASCII-CI is implemented by generating hashes based on lower-case letters
and doing lower-case compares. It implements a new xfs_nameops vector for
doing the hashes and comparisons for all filename operations.
To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci
<device>
SGI-PV: 981516
SGI-Modid: xfs-linux-melb:xfs-kern:31209a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This implements the code to store the actual filename found during a
lookup in the dentry cache and to avoid multiple entries in the dcache
pointing to the same inode.
To avoid polluting the dcache, we implement a new directory inode
operations for lookup. xfs_vn_ci_lookup() stores the correct case name in
the dcache.
The "actual name" is only allocated and returned for a case- insensitive
match and not an actual match.
Another unusual interaction with the dcache is not storing negative
dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT
is returned. During the VFS lookup, if a dentry returned has no inode,
dput is called and ENOENT is returned. By not doing a d_add, this actually
removes it completely from the dcache to be reused. create/rename have to
be modified to support unhashed dentries being passed in.
SGI-PV: 981521
SGI-Modid: xfs-linux-melb:xfs-kern:31208a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This add a dcache entry to the dcache for lookup, but changing the name
that is associated with the entry rather than the one passed in to the
lookup routine.
First, it sees if the case-exact match already exists in the dcache and
uses it if one exists. Otherwise, it allocates a new node with the new
name and splices it into the dcache.
Original code from ntfs_lookup in fs/ntfs/namei.c by Anton Altaparmakov.
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Acked-by: Christoph Hellwig <hch@infradead.org>
The end of the xfs_da_args structure has 4 unsigned char fields for
true/false information on directory and attr operations using the
xfs_da_args structure.
The following converts these 4 into a op_flags field that uses the first 4
bits for these fields and allows expansion for future operation
information (eg. case-insensitive lookup request).
SGI-PV: 981520
SGI-Modid: xfs-linux-melb:xfs-kern:31206a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Adds two pieces of functionality for the basis of case-insensitive support
in XFS:
1. A comparison result enumerated type: xfs_dacmp. It represents an
exact match, case-insensitive match or no match at all. This patch
only implements different and exact results.
2. xfs_nameops vector for specifying how to perform the hash generation
of filenames and comparision methods. In this patch the hash vector
points to the existing xfs_da_hashname function and the comparison
method does a length compare, and if the same, does a memcmp and
return the xfs_dacmp result.
All filename functions that use the hash (create, lookup remove, rename,
etc) now use the xfs_nameops.hashname function and all directory lookup
functions also use the xfs_nameops.compname function.
The lookup functions also handle case-insensitive results even though the
default comparison function cannot return that. And important aspect of
the lookup functions is that an exact match always has precedence over a
case-insensitive. So while a case-insensitive match is found, we have to
keep looking just in case there is an exact match. In the meantime, the
info for the first case-insensitive match is retained if no exact match is
found.
SGI-PV: 981519
SGI-Modid: xfs-linux-melb:xfs-kern:31205a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
de-duplicate calls to xfs_attr_trace_enter
Every call to xfs_attr_trace_enter() shares the exact same 16 args in the
middle... just send in the context pointer and let the next level down
split it into the ktrace.
Compile tested only.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31200a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_binval aka xfs_flush_buftarg is the first thing done in
xfs_free_buftarg, so there is no need to have duplicated calls just before
xfs_free_buftarg in the mount failure path.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched
to kzalloc. Plug a leak of the mount structure for most early mount
failures. Move xfs_icsb_init_counters to as late as possible in the mount
path and make sure to undo it so that no stale hotplug cpu notifiers are
left around on mount failures.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Split setting the block and sector size out of xfs_fs_fill_super into a
small helper to make xfs_fs_fill_super more readable.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently closing the rt/log block device is done in the wrong spot, and
far too early. So revampt it:
- xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that
it is done after tearing down the buftarg completely.
- call to xfs_unmountfs_close moved from xfs_mountfs into caller so
that it's done after tearing down the filesystem completely.
- xfs_unmountfs_close is renamed to xfs_close_devices and made static
in xfs_super.c
- opening of the block devices is split into a helper xfs_open_devices
that is symetric in use to xfs_close_devices
- xfs_unmountfs can now lose struct cred
- error handling around device opening sanitized in xfs_fs_fill_super
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Freeing of the superblock is already handled in the caller, and that is
more symmetric with the mount path, too.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount is already pretty linux-specific so merge it into
xfs_fs_fill_super to allow for a more structured mount code in the next
patches. xfs_start_flags and xfs_finish_flags also move to xfs_super.c.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmount is small and already pretty Linux specific, so merge it into
the callers. The real unmount path is simplified a little by doing a
WARN_ON on the xfs_unmount_flush retval directly instead of propagating
the error back to the caller, and the mout failure case in simplified
significantly by removing the forced shutdown case and all the dmapi
events that shouldn't be sent because the dmapi mount event hasn't been
sent by that time either.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.
xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.
Just kill those two and merge them into xfs_setattr.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mntupdate already is completely Linux specific due to the VFS flags
passed in, so it might aswell be merged into xfs_fs_remount.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31185a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Quite useless wrapper that doesn't help making the code more readable.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31184a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recent changes to update the version number during mount (attr2 stuff)
failed to change the assert that checked for calid flags being changed on
mount. Clearly this path hasn't been exercised by the test code....
SGI-PV: 981950
SGI-Modid: xfs-linux-melb:xfs-kern:31183a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
No need for addition permission checks in the xattr handler,
fs/xattr.c:xattr_permission() already does them, and in fact slightly more
strict then what was in the attr_capable handlers.
SGI-PV: 981809
SGI-Modid: xfs-linux-melb:xfs-kern:31164a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The l_flushsema doesn't exactly have completion semantics, nor mutex
semantics. It's used as a list of tasks which are waiting to be notified
that a flush has completed. It was also being used in a way that was
potentially racy, depending on the semaphore implementation.
By using a sv_t instead of a semaphore we avoid the need for a separate
counter, since we know we just need to wake everything on the queue.
Original waitqueue implementation from Matthew Wilcox. Cleanup and
conversion to sv_t by Christoph Hellwig.
SGI-PV: 981507
SGI-Modid: xfs-linux-melb:xfs-kern:31059a
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We found this while experimenting with 2GiB xfs logs. The previous code
never assumed that xfs logs would ever get so large.
SGI-PV: 981502
SGI-Modid: xfs-linux-melb:xfs-kern:31058a
Signed-off-by: Michael Nishimoto <miken@agami.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.
This patch removes size argument from all callsites.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
features2 fields.
Previously, mounting with noattr2 failed to achieve anything because
although it cleared the attr2 mount flag, it would set it again as soon as
it processed the superblock fields. The fix now has an explicit noattr2
flag and uses it later to fix up the versionnum and features2 fields.
SGI-PV: 980021
SGI-Modid: xfs-linux-melb:xfs-kern:31003a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure we call nfs_sb_deactive() after releasing the directory inode
nfs_remount oops when rebooting + possible fix
Simplify the code of include/linux/task_io_accounting.h.
It is also more reasonable to have all the task i/o-related statistics in a
single struct (task_io_accounting).
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to avoid the "Busy inodes after unmount" error message, we need to
ensure that nfs_async_unlink_release() releases the super block after the
call to nfs_free_unlinkdata().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.
This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).
text data bss dec hex filename
11651 0 0 11651 2d83 kernel/exit.o.before
11619 0 0 11619 2d63 kernel/exit.o.after
10886 132 136 11154 2b92 kernel/fork.o.before
10758 132 136 11026 2b12 kernel/fork.o.after
3082029 807968 4818600 8708597 84e1f5 vmlinux.o.before
3081869 807968 4818600 8708437 84e155 vmlinux.o.after
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.infradead.org/mtd-2.6: (57 commits)
[MTD] [NAND] subpage read feature as a way to increase performance.
CPUFREQ: S3C24XX NAND driver frequency scaling support.
[MTD][NAND] au1550nd: remove unused variable
[MTD] jedec_probe: Fix SST 16-bit chip detection
[MTD][MTDPART] Fix a division by zero bug
[MTD][MTDPART] Cleanup and document the erase region handling
[MTD][MTDPART] Handle most checkpatch findings
[MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
[MTD] physmap: resume already suspended chips on failure to suspend
[MTD] physmap: Fix suspend/resume/shutdown bugs.
[MTD] [NOR] Fix -ETIMEO errors in CFI driver
[MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
[JFFS2] Use .unlocked_ioctl
[MTD] Fix const assignment in the MTD command line partitioning driver
[MTD] [NOR] gen_probe: No debug message when debugging is disabled
[MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
[MTD] [MAPS] Remove the bast-flash driver.
[MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
[MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
[MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (39 commits)
[PATCH] fix RLIM_NOFILE handling
[PATCH] get rid of corner case in dup3() entirely
[PATCH] remove remaining namei_{32,64}.h crap
[PATCH] get rid of indirect users of namei.h
[PATCH] get rid of __user_path_lookup_open
[PATCH] f_count may wrap around
[PATCH] dup3 fix
[PATCH] don't pass nameidata to __ncp_lookup_validate()
[PATCH] don't pass nameidata to gfs2_lookupi()
[PATCH] new (local) helper: user_path_parent()
[PATCH] sanitize __user_walk_fd() et.al.
[PATCH] preparation to __user_walk_fd cleanup
[PATCH] kill nameidata passing to permission(), rename to inode_permission()
[PATCH] take noexec checks to very few callers that care
Re: [PATCH 3/6] vfs: open_exec cleanup
[patch 4/4] vfs: immutable inode checking cleanup
[patch 3/4] fat: dont call notify_change
[patch 2/4] vfs: utimes cleanup
[patch 1/4] vfs: utimes: move owner check into inode_change_ok()
[PATCH] vfs: use kstrdup() and check failing allocation
...
Oleg Nesterov points out that we should check that the task is still alive
before we iterate over the threads. This patch includes a fixup for this.
Also simplify do_io_accounting() implementation.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dup2() should return -EBADF on exceeded sysctl_nr_open
* dup() should *not* return -EINVAL even if you have rlimit set to 0;
it should get -EMFILE instead.
Check for orig_start exceeding rlimit taken to sys_fcntl().
Failing expand_files() in dup{2,3}() now gets -EMFILE remapped to -EBADF.
Consequently, remaining checks for rlimit are taken to expand_files().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since Ulrich is OK with getting rid of dup3(fd, fd, flags) completely,
to hell the damn thing goes. Corner case for dup2() is handled in
sys_dup2() (complete with -EBADF if dup2(fd, fd) is called with fd
that is not open), the rest is done in dup3().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
make it atomic_long_t; while we are at it, get rid of useless checks in affs,
hfs and hpfs - ->open() always has it equal to 1, ->release() - to 0.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro notice one cornercase that the new dup3() code. The dup2()
function, as a special case, handles dup-ing to the same file
descriptor. In this case the current dup3() code does nothing at
all. I.e., it ingnores the flags parameter. This shouldn't happen,
the close-on-exec flag should be set if requested.
In case the O_CLOEXEC bit in the flags parameter is not set the
dup3() function should behave in this respect identical to dup2().
This means dup3(fd, fd, 0) should not actively reset the c-o-e
flag.
The patch below implements this minor change.
[AV: credits to Artur Grabowski for bringing that up as potential subtle point
in dup2() behaviour]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
