Commit Graph

508 Commits

Author SHA1 Message Date
Bjorn Helgaas
4f1bcaf094 [PATCH] vgacon: make VGA_MAP_MEM take size, remove extra use
VGA_MAP_MEM translates to ioremap() on some architectures.  It makes sense
to do this to vga_vram_base, because we're going to access memory between
vga_vram_base and vga_vram_end.

But it doesn't really make sense to map starting at vga_vram_end, because
we aren't going to access memory starting there.  On ia64, which always has
to be different, ioremapping vga_vram_end gives you something completely
incompatible with ioremapped vga_vram_start, so vga_vram_size ends up being
nonsense.

As a bonus, we often know the size up front, so we can use ioremap()
correctly, rather than giving it a zero size.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:58 -07:00
Linus Torvalds
ff9144530e Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] 3559/1: S3C2442: core and serial port
  [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration
  [ARM] 3558/1: SMDK24XX: LED platform devices
  [ARM] 3534/1: add spi support to lubbock platform
  [ARM] 3554/1: ARM: Fix dyntick locking
  [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info
  [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug
  [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH
  [ARM] 3550/1: OSIRIS: fix serial port map for 1:1
  [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S
  [ARM] 3335/1: Old-abi Thumb sys_syscall broken
  [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig
  [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support
  [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers
  [ARM] 3407/1: lpd7x: documetation update
  [ARM] 3406/1: lpd7x: compilation fix for smc91x
  [ARM] 3405/1: lpd7a40x: CPLD ssp driver
  [ARM] 3404/1: lpd7a40x: AMBA CLCD support
  [ARM] 3403/1: lpd7a40x: updated default configurations
  [ARM] 3402/1: lpd7a40x: serial driver bug fix
  ...
2006-06-20 14:49:00 -07:00
Linus Torvalds
d90125bfe9 Merge branch 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6
* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits)
  intelfb: fixup clock calculation debugging.
  Removed hard coded EDID buffer size.
  intelfb: use regular modedb table instead of VESA
  intelfb: use firmware EDID for mode database
  Revert "intelfb driver -- use the regular modedb table instead of the VESA"
  intelfb: int option fix
  sync modesetting code with X.org
  intelfb: align with changes from my X driver.
  intelfb driver -- use the regular modedb table instead of the VESA
  Adds support for 256MB aperture on 945 chipsets to the intelfb driver
  intelfb -- uses stride alignment of 64 on the 9xx chipsets.
  intelfb: some cleanups for intelfbhw
  intelfb: fixup pitch calculation like X does
  intelfb: fixup p calculation
  This patch makes a needlessly global struct static.
  intelfb: add i945GM support
  intelfb: fixup whitespace..
  intelfb: add hw cursor support for i9xx
  intelfb: make i915 modeset
  intelfb: add support for i945G
  ...
2006-06-19 18:53:20 -07:00
Marc Singer
903e2bbda9 [ARM] 3404/1: lpd7a40x: AMBA CLCD support
Patch from Marc Singer

Board support and LCD panel configurations to integrate lh7a40x's with
the amba clcd driver.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18 16:16:48 +01:00
Dave Airlie
2abac1db35 intelfb: fixup clock calculation debugging.
The debugging code for pll clocks was wrong and causing div by 0.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-18 16:12:27 +10:00
Malcom Parsons
26e780e8ef [PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW mode
From: Malcom Parsons <malcolm.parsons@gmail.com>

When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll
region, the bottom few lines have to be redrawn.  Without this patch, the
wrong text is drawn into these lines, corrupting the display.

Observed in 2.6.14 when running an IRC client in the Nintendo DS linux
port.

I haven't tested if scrolling down has the same problem.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08 15:12:21 -07:00
Dennis Munsie
72109368de Removed hard coded EDID buffer size.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-07 18:53:38 +10:00
Martin Michlmayr
8fd66ab852 [PATCH] maxinefb: Fix compilation error
From: Martin Michlmayr <tbm@cyrius.com>

Fix the following compilation error:

CC      drivers/video/maxinefb.o
drivers/video/maxinefb.c:58: warning: initializer-string for array of chars is too long
drivers/video/maxinefb.c:58: warning: (near initialization for \u2018maxinefb_fix.id\u2019)
drivers/video/maxinefb.c:110: error: unknown field \u2018fb_get_fix\u2019 specified in initializer
drivers/video/maxinefb.c:110: error: \u2018gen_get_fix\u2019 undeclared here (not in a function)
drivers/video/maxinefb.c:111: error: unknown field \u2018fb_get_var\u2019 specified in initializer
drivers/video/maxinefb.c:111: error: \u2018gen_get_var\u2019 undeclared here (not in a function)
make[2]: *** [drivers/video/maxinefb.o] Error 1

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31 16:27:11 -07:00
Rodolfo Giometti
c05b7f3d12 [PATCH] au1100fb: Fix compilation
From: Rodolfo Giometti <giometti@linux.it>

Fix the following warning on compilation:

drivers/video/au1100fb.c: In function `au1100fb_fb_setcolreg':
drivers/video/au1100fb.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_fb_pan_display':
drivers/video/au1100fb.c:321: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_fb_mmap':
drivers/video/au1100fb.c:387: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_drv_probe':
drivers/video/au1100fb.c:471: warning: unsigned int format, long unsigned int arg (arg 2)
drivers/video/au1100fb.c: At top level:
drivers/video/au1100fb.c:617: warning: initialization from incompatible pointer type
drivers/video/au1100fb.c:618: warning: initialization from incompatible pointer type

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31 16:27:11 -07:00
David Hollister
308af9290a [PATCH] fbcon: fix scrollback with logo issue immediately after boot
From: David Hollister <david.hollister@amd.com>

After the system boots with the logo, if the first action is a scrollback, the
screen may become garbled.  This patch ensures that the softback_curr value is
updated along with softback_in following the scrollback.

Signed-off-by: David Hollister <david.hollister@amd.com>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31 16:27:10 -07:00
Dennis Munsie
7a532c69c3 intelfb: use regular modedb table instead of VESA
intelfb driver -- use the regular modedb table instead of the VESA modedb
table.  Ideally, the 9xx stride patch should be applied first, since there
are modes in the VESA table that won't work without that patch.

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29 18:58:09 +10:00
Antonino A. Daplas
56e004e543 intelfb: use firmware EDID for mode database
Use firmware EDID for the driver's private mode database.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29 18:49:08 +10:00
Dave Airlie
080a416802 Revert "intelfb driver -- use the regular modedb table instead of the VESA"
This reverts 2c47430a03 commit.
This conflicts with a patch in -mm from Antonino reapply later.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29 18:45:19 +10:00
Eric Hustvedt
65eb2f97db intelfb: int option fix
Fix integer option parsing in the intelfb driver. The macro wasn't
accounting for the equal sign past the option name. As a result,
the vram option always returned 0.

Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29 18:38:55 +10:00
Dave Airlie
f728377f67 sync modesetting code with X.org
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27 18:56:02 +10:00
Dave Airlie
c9daa873c3 intelfb: align with changes from my X driver.
This just realigns the PLL calculation routines with the ones from my X.org
driver.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27 18:44:02 +10:00
Dennis Munsie
2c47430a03 intelfb driver -- use the regular modedb table instead of the VESA
modedb table.  Ideally, the 9xx stride patch should be applied first, since
there are modes in the VESA table that won't work without that patch.

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27 18:33:35 +10:00
Eric Hustvedt
1aecb39309 Adds support for 256MB aperture on 945 chipsets to the intelfb driver
and corrects calculation of stolen memory overhead.

Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27 18:30:00 +10:00
Dennis Munsie
df7df8ab7b intelfb -- uses stride alignment of 64 on the 9xx chipsets.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27 18:17:52 +10:00
Andrew Morton
9e8a3d229b [PATCH] i810 section fix
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1b88) and 'i810_alloc_agp_mem'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1b8f) and 'i810_alloc_agp_mem'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1ba3) and 'i810_alloc_agp_mem'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1bb5) and 'i810_alloc_agp_mem'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_fix_offsets' (at offset 0x1bc6) and 'i810_alloc_agp_mem'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_init_defaults' (at offset 0x1dd8) and 'i810_init_device'
WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference to .init.data: from .text between 'i810_init_defaults' (at offset 0x1dfb) and 'i810_init_device'

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:22 -07:00
Paul A. Clarke
6d39bedc47 [PATCH] matroxfb: fix DVI setup to be more compatible
There has been a longstanding problem with the Matrox G450 and perhaps
other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes
running Linux.  Higher resolutions and/or higher refresh rates resulted in
a very noticably "jittery" display, and sometimes no display, depending on
the physical monitor.  This patch fixes that problem on the systems I have
easy access to...

I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on
an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a
colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32
box (w/GXT135P).  I also tested it on IA32 box I have with a GXT135P to
verify that it didn't obviously break anything.  In my testing, I covered
single-card, single and dual-head setups using both HD15 and DVI-D signals,
on both the IA32 and ppc64 boxes.  While everything appeared fine on both
boxes, I did encounter one problem: I can't get any signal on the DVI-D
output on the ppc64 box.  However, this is also the case without my patch.

I just noticed that screen-blanking only occurs on the primary display as
well.

Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Signed-off-by: Ian Romanick <idr@us.ibm.com>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:16 -07:00
Richard Purdie
68673afd44 [PATCH] Backlight/LCD Class: Fix sysfs _store error handling
The backlight and LCD class _store functions currently accept values like "34
some random strings" without error.  This corrects them to return -EINVAL if
the value is not numeric with an optional byte of trailing whitespace.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:56 -07:00
Linus Torvalds
bed7a56033 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: Do not overwrite makefile as anohter user
  kbuild: drivers/video/logo/ - fix ident glitch
  kbuild: fix gen_initramfs_list.sh
  kbuild modpost - relax driver data name
  kbuild: removing .tmp_versions considered harmful
  kbuild: fix modpost segfault for 64bit mipsel kernel
2006-05-08 09:10:44 -07:00
Sam Ravnborg
cc873e1aa1 kbuild: drivers/video/logo/ - fix ident glitch
Jan Engelhardt <jengelh@linux01.gwdg.de> wrote:
while compiling 2.6.17-rc2 with allyesconfig, this showed up:
...
  LOGO  drivers/video/logo/logo_superh_clut224.c
  CC      drivers/video/logo/logo_linux_mono.o
...

A tab had sneaked in. Convert it to a few spaces.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-30 23:59:16 +02:00
Ralf Baechle
991cef7be2 [PATCH] au1200fb: Remove accidentally duplicated content of au1200fb.c
Content of file au1200fb.c was duplicated. Remove.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-29 17:05:11 -07:00
Antonino A. Daplas
4de0b1ee1b [PATCH] asiliantfb: Add help text in Kconfig
Add help text in Kconfig

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28 08:33:49 -07:00
Jon Smirl
913e7ec545 [PATCH] Frame buffer: remove cmap sysfs interface
Remove it as it does not work properly due to sysfs core changes.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 13:08:56 -07:00
Darren Jenkins
c16c556e0e [PATCH] fix section mismatch in pm2fb.o
WARNING: drivers/video/pm2fb.o - Section mismatch: reference
to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd5d)
WARNING: drivers/video/pm2fb.o - Section mismatch: reference
to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd82)

They are caused because pm2fb_set_par() uses lowhsync and lowvsync which
are marked __devinitdata.

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20 07:54:03 -07:00
Antonino A. Daplas
6a2a88668e [PATCH] fbdev: Fix return error of fb_write
Fix return code of fb_write():

If at least 1 byte was transferred to the device, return number of bytes,
otherwise:

    - return -EFBIG - if file offset is past the maximum allowable offset or
      size is greater than framebuffer length
    - return -ENOSPC - if size is greater than framebuffer length - offset

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:54 -07:00
Randy Dunlap
a61bdaad6c [PATCH] savagefb: fix section mismatch warnings
Fix modpost section mismatch warnings in savagefb driver:

WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66)
WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e)
WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:54 -07:00
Randy Dunlap
246846fc18 [PATCH] radeonfb section mismatches
Marking radeon_pci_register() as __devinit clears up all section
mismatch warnings that are caused by radeon_pci_register() calling
various __devinit function.  Is there some reason not to do this?

WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6)
WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:54 -07:00
Jean Delvare
3e42f0b19e [PATCH] fb: Fix section mismatch in savagefb
Fix the following section mismatch:

WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:54 -07:00
Antonino A. Daplas
397eeab321 [PATCH] fbdev: Use logo with depth of 4 or less for static pseudocolor
Since the visual STATIC_PSEUDOCOLOR has a read-only colormap, use logos
with 16 colors only since these logos use the console palette.  This has a
higher likelihood that the logo will display correctly.

Signed-of-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:54 -07:00
Antonino A. Daplas
89ec4c238e [PATCH] vesafb: Fix incorrect logo colors in x86_64
Bugzilla Bug 6299:

A pixel size of 8 bits produces wrong logo colors in x86_64.

The driver has 2 methods for setting the color map, using the protected
mode interface provided by the video BIOS and directly writing to the VGA
registers.  The former is not supported in x86_64 and the latter is enabled
only in i386.

Fix by enabling the latter method in x86_64 only if supported by the BIOS.
If both methods are unsupported, change the visual of vesafb to
STATIC_PSEUDOCOLOR.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:54 -07:00
Andrew Morton
f2e782efb0 [PATCH] atyfb is bust on sparc32
Heaps of build errors - disable it to keep sparc32 allmodconfig happy.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:54 -07:00
Adrian Bunk
9ec85c03d0 [PATCH] video/aty/atyfb_base.c: fix an off-by-one error
Fix an obvious of-by-one error spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:53 -07:00
Dave Airlie
51d797474f intelfb: some cleanups for intelfbhw
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 16:19:26 +10:00
Dave Airlie
3587c50991 intelfb: fixup pitch calculation like X does
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 14:46:55 +10:00
Dave Airlie
3aff13cfb8 intelfb: fixup p calculation
This fixes up the p calculation of p1 and p2 for the i9xx chipsets.
This seems to work a lot better for lower pixel clocks..

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:29 +10:00
Dave Airlie
46f60b8e67 This patch makes a needlessly global struct static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:29 +10:00
Dave Airlie
9a90603f65 intelfb: add i945GM support
Untested i945GM support just add the framework.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
8b91b0b4f2 intelfb: fixup whitespace..
repeat after me, I must not take code from X without reformatting...

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
8bb91f6a2d intelfb: add hw cursor support for i9xx
This adds hw cursor support for the i9xx chipsets.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
7679f4d692 intelfb: make i915 modeset
This takes the modeset and pll code from my X driver.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
9639d5ec07 intelfb: add support for i945G
This just adds the defines and structure for i945G

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
0c187addab intelfb: enable on x86_64
i945G chipsets supports 64-bit.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
16109b3f4c intelfb: add p divisor increments for i9xx.
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:28 +10:00
Dave Airlie
8492f081e5 intelfb: change splitm to be brute force
The old splitm didn't always work use a brute force.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:27 +10:00
Dave Airlie
d024960cff intelfb: add pll index to the intelfb structure
Add the pll index into the information structure, change get_chipset to
take only the info structure, use plls in correct places
2006-04-03 11:43:27 +10:00
Dave Airlie
7258b11d2e intelfb: prepare for i9xx support.
This code just moves the PLL min/max calculations variables into
a structure, it doesn't change or add any new functionality.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03 11:43:27 +10:00