Commit Graph

62 Commits

Author SHA1 Message Date
Jeff Garzik
50630195bb [libata] mark certain hardware (or drivers) with a no-atapi flag
Some hardware does not support the PACKET command at all.
Other hardware supports ATAPI, but the driver does something nasty such
as calling BUG() when an ATAPI command is issued.

For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI.

Initial version contributed by Ben Collins.
2005-12-13 02:29:45 -05:00
Tejun Heo
9a40525788 [PATCH] libata: fix ata_scsi_pass_thru error handling
This patch makes ata_scsi_pass_thru() properly set result code and
sense data on translation failures.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-03 20:31:16 -05:00
Jeff Garzik
c6e6e666cb [libata] REQUEST SENSE handling fixes
- Move ATAPI check-condition handling out of the timeout handler
- Use multi-qc-issue feature to issue REQUEST SENSE ATAPI PACKET
  command upon receiving an ATAPI check-condition.

This cleans things up a lot, and eliminates a nasty recursion bug.
2005-11-14 14:50:05 -05:00
Mark Lord
dcc2d1e7f0 [libata passthru] address slave devices correctly 2005-11-13 16:22:06 -05:00
Mike Christie
85837ebdd7 [PATCH] kill libata scsi_wait_req usage (make libata compile with scsi-misc changes)
scsi_wait_req does not exist any more in the SCSI layer.  This patch
makes it so libata can compile again.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11 14:57:05 -08:00
Alan Cox
f51750d5ea [PATCH] libata: Note a nasty ATA quirk
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-10 07:30:37 -05:00
Randy Dunlap
8e8b77dd48 [PATCH] libata kernel-doc fixes
Fix all reported kernel-doc errors in libata.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09 01:10:55 -05:00
Jeff Garzik
193515d51c [libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines 2005-11-07 00:59:37 -05:00
Jeff Garzik
ce1eeb95fc Merge branch 'upstream' 2005-10-30 23:32:03 -05:00
Jeff Garzik
005a5a06a6 [libata] locking rewrite (== fix)
A lot of power packed into a little patch.

This change eliminates the sharing between our controller-wide spinlock
and the SCSI core's Scsi_Host lock.  As the locking in libata was
already highly compartmentalized, always referencing our own lock, and
never scsi_host::host_lock.

As a side effect, this change eliminates a deadlock from calling
scsi_finish_command() while inside our spinlock.
2005-10-30 23:31:48 -05:00
Jeff Garzik
054ee8fd39 Merge branch 'upstream' 2005-10-30 04:50:22 -05:00
Jeff Garzik
a7dac447bb [libata] change ata_qc_complete() to take error mask as second arg
The second argument to ata_qc_complete() was being used for two
purposes: communicate the ATA Status register to the completion
function, and indicate an error.  On legacy PCI IDE hardware, the latter
is often implicit in the former.  On more modern hardware, the driver
often completely emulated a Status register value, passing ATA_ERR as an
indication that something went wrong.

Now that previous code changes have eliminated the need to use drv_stat
arg to communicate the ATA Status register value, we can convert it to a
mask of possible error classes.

This will lead to more flexible error handling in the future.
2005-10-30 04:44:42 -05:00
Jeff Garzik
5615ca7906 Merge branch 'upstream' 2005-10-28 21:32:01 -04:00
Douglas Gilbert
00ac37f508 [libata scsi] MODE SELECT, strengthen mode sense
- move default mode pages to the front of libata-scsi.c
    so various functions can access them
  - partial annotation of these pages, point out divergence
    from sat-r06
  - replace various mode page magic numbers with defines
  - strengthen MODE SENSE command decoding: handle DBD
    bit in cdb, yield block descriptor (per sat-r06) and
    handle mode sub pages

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28 15:58:28 -04:00
Jeff Garzik
96b88fb850 Merge branch 'master' 2005-10-28 12:31:34 -04:00
Jeff Garzik
7a9f8f93d2 Merge branch 'master' 2005-10-28 12:29:23 -04:00
Jeff Garzik
057ace5e79 libata: const-ification bombing run
Enforce access rules where appropriate.

If the compiler is smart enough, this may buy us an optimization or two
as a side effect.
2005-10-22 14:27:05 -04:00
Jeff Garzik
b194b4250c Merge branch 'upstream' 2005-10-18 21:52:42 -04:00
Jeff Garzik
77501f3cb6 Merge branch 'upstream' 2005-10-18 18:30:58 -04:00
Albert Lee
8cbd6df1f0 [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6)
- merge ata_prot_to_cmd() and ata_dev_set_protocol() as
       ata_rwcmd_protocol()
     - pave road for read/write multiple support
     - remove usage of pre-cached command and protocol values and call
       ata_rwcmd_protocol() instead

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

==============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:13 -04:00
Albert Lee
07506697d1 [PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6)
move the initialization of taskfile LBA flags
     "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags"
   to the SCSI translation functions

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

=============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:13 -04:00
Jeff Garzik
c4052da6f0 Merge branch 'upstream' 2005-10-09 11:16:14 -04:00
Jeff Garzik
422fa08e53 [libata passthru] update ATAPI completion for new error handling 2005-10-09 10:49:34 -04:00
Jeff Garzik
ffe75ef650 Merge branch 'upstream' 2005-10-09 10:40:44 -04:00
Douglas Gilbert
ae00651020 [libata scsi] improve scsi error handling with ata_scsi_set_sense()
- change "xlat" and "fill" actors in libata-scsi so
    they are responsible for SCSI status and sense data
    when they return 1. This allows GOOD status or a
    specialized error to be set.
  - yield an error for mode sense requests for saved
    values [sat-r06]
  - remove static inlines for ata_bad_scsiop() and
    ata_bad_cdb() which are no longer used

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 09:09:35 -04:00
Douglas Gilbert
845c5834d0 [libata scsi] add ata_scsi_set_sense helper
- add extern ata_scsi_set_sense() to build SCSI
    fixed sense data and corresponding SCSI status

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 08:55:41 -04:00
Jeff Garzik
0e5dec478c [libata passthru] add (DRIVER_SENSE << 24) to all check-conditions 2005-10-06 09:40:20 -04:00
Jeff Garzik
e12669e774 libata: minor cleanups
A few code shuffles, to make merging future code easier.

Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas
Gilbert.
2005-10-05 18:39:23 -04:00
Jeff Garzik
a939c96315 libata: move atapi_request_sense() to libata-scsi module
No content changes, just moving code around.
2005-10-05 17:09:16 -04:00
Jeff Garzik
a15dbeb477 libata: ATAPI command completion tweaks and notes
1) note urgent bug, that completes command twice

2) only fix up INQUIRY data if the SCSI version is zero (typically
indicates ATAPI MMC-ish device)

3) if there is a problem on the ATA bus, don't bother with REQUEST
SENSE, just directly handle the error based on Status/Error registers.
2005-10-05 15:02:14 -04:00
Jeff Garzik
cedc9a478d libata: fix ATAPI DMA alignment issues
ATAPI needs to be padded to next 4 byte boundary, if misaligned.

Original work by me, many fixes from Tejun Heo.
2005-10-05 07:13:30 -04:00
Jeff Garzik
643736a58d Merge branch 'scsi-scan' 2005-10-04 14:24:04 -04:00
Jeff Raubitschek
54dac83c42 [libata passthru] fix leak on error 2005-10-04 10:21:19 -04:00
Albert Lee
9d5b130213 [libata scsi] add CHS support to ata_scsi_start_stop_xlat() 2005-10-04 08:48:17 -04:00
Albert Lee
3aef52311b [libata scsi] tidy up SCSI lba and xfer len calculations
move the redundant SCSI lba and transfer length calculation code from
ata_scsi_verify_xlat() and ata_scsi_rw_xlat() to common functions.
2005-10-04 08:47:43 -04:00
Albert Lee
c187c4b58a libata: minor whitespace, comment, debug message updates 2005-10-04 08:46:51 -04:00
Jeff Garzik
3f19ee8cb3 [libata] improve device scan even more
Since our max_lun is unconditionally set to 1, we might as well
hardcode a LUN 0 probe, rather than a wildcard LUN scan.

The ide-scsi driver sets max_lun to a value greater than under
certain conditions:

        if ((drive->id->last_lun & 0x7) != 7)
                host->max_lun = (drive->id->last_lun & 0x7) + 1;
        else
                host->max_lun = 1;

last_lun is Word 126 of IDENTIFY PACKET DEVICE, marked as obsolete
and undocumented in non-ancient specs.  We'll leave it out for now.
Should the need arise to support multi-LUN ATAPI devices, we'll
probably want to add the above code.

Finally, there have been reports of REPORT LUNS commands locking up
ATAPI drives.  Eliminating the wildcard LUN scan could help reduce
the trouble from problematic drives.
2005-10-03 21:36:41 -04:00
Jeff Garzik
644dd0cc49 [libata] improve device scan
Replace SCSI's legacy "bang at the door" method of probing with one
directly controlled by the underlying ATA transport layer.

We now only call scsi_scan_target() for devices we find, rather than
probing every possible channel/id within a certain range.
2005-10-03 15:55:19 -04:00
Jeff Garzik
142e27fc8a Merge /spare/repo/linux-2.6/ 2005-09-08 05:41:28 -04:00
Jeff Garzik
c324b44c34 Merge /spare/repo/linux-2.6/ 2005-09-08 05:39:55 -04:00
Jeff Garzik
6f10623304 [libata] fix ATAPI-enable typo
Dumb typo spotted by Mark Lord.
2005-08-30 21:52:18 -04:00
Jeff Garzik
1623c81eec [libata] allow ATAPI to be enabled with new atapi_enabled module option
ATAPI is getting close to being ready.  To increase exposure, we enable
the code in the upstream kernel, but default it to off (present
behavior).  Users must pass atapi_enabled=1 as a module option (if
module) or on the kernel command line (if built in) to turn on
discovery of their ATAPI devices.
2005-08-30 03:37:42 -04:00
Jeff Garzik
76b2bf9b4d Merge libata branch 'chs-support' to latest upstream kernel. 2005-08-29 19:24:43 -04:00
Jeff Garzik
da61396d24 Merge upstream kernel into libata 'passthru' branch 2005-08-29 19:01:43 -04:00
Jeff Garzik
2fca877b68 /spare/repo/libata-dev branch 'v2.6.13' 2005-08-29 16:12:36 -04:00
Jeff Garzik
70d374ea99 Merge /spare/repo/linux-2.6/ 2005-08-29 15:59:42 -04:00
Jeff Garzik
af36d7f0df [libata] license change, other bits
- changes license of all code from OSL+GPL to plain ole GPL
  - except for NVIDIA, who hasn't yet responded about sata_nv
  - copyright holders were already contacted privately

- adds info in each driver about where hardware/protocol docs may be
  obtained

- where I have made major contributions, updated copyright dates
2005-08-28 20:18:39 -04:00
Jeff Garzik
135932651f [libata scsi] fix read/write translation edge cases
Fix bugs for unlikely edge cases noticed by Douglas Gilbert:

- When READ(6)/WRITE(6) sector count == 0, treat it as 256 sectors

- For other READ(x)/WRITE(x), when sector count == 0, error.
  We don't support successfully completing zero-length transfers at
  this time.
2005-08-27 04:20:12 -04:00
Douglas Gilbert
972dcafb6d [libata scsi] add START STOP UNIT translation 2005-08-11 03:35:53 -04:00
Jeff Garzik
2f058256cb Merge /spare/repo/linux-2.6/ 2005-08-10 13:46:28 -04:00