Recently all instances of tHalHandle were replaced with mac_handle_t
to align with current usage and the Linux coding standard. To align
with the new naming now replace all instances of hHal with mac_handle
in sme_api.
Change-Id: Idd66679290567e9ed27b5c7e1a5401f36229d9a7
CRs-Fixed: 2349571
Recently all instances of tHalHandle were replaced with mac_handle_t
to align with current usage and the Linux coding standard. To align
with the new naming now replace all instances of hHal with mac_handle
in sme_ft_api.
Change-Id: I5e41d0767b97bf698dbb14834f2080bd82577035
CRs-Fixed: 2349570
Recently all instances of tHalHandle were replaced with mac_handle_t
to align with current usage and the Linux coding standard. To align
with the new naming now replace all instances of hHal with mac_handle
in sme_qos.
Change-Id: I067ec7d921888cc8f743561810f9163bb4ea9008
CRs-Fixed: 2349569
FW does not assert when wow is enabled in presence of active
scans. Only requirement is to abort the scans while suspending.
So holding wakelock till scan is complete may introduce power
side effects.
Aborting the scan while suspending is already taken care by
the CR-2343385.
Fix is to revert the
Change Id: I02ddc9b5e6ba5f1782d00e34f044ace34c54d0b0 and
cleanup the channel list from rrm context in case of failure
of rrm scan req.
Change-Id: I844210a6a11f1d882bf42340b80b386856d9b87b
CRs-Fixed: 2349857
Enums tdls_add_oper and TdlsAddOper are same. Instead redefining
use the same enum across different files.
Change-Id: Ibb71b0f80e156e4bd3a345a56c7b4d99ce770ef7
CRs-Fixed: 2349616
I9d0d7d109621237f29d66f7b06c5b63c38f63fb2 (qcacld-3.0: Introduce
mac_handle_t) introduced a "better" name for tHalHandle, so replace
tHalHandle with mac_handle_t in sme_api.
Change-Id: I46690f8913a8ca34f7494e7baf38188c11073f7b
CRs-Fixed: 2348552
I9d0d7d109621237f29d66f7b06c5b63c38f63fb2 (qcacld-3.0: Introduce
mac_handle_t) introduced a "better" name for tHalHandle, so replace
tHalHandle with mac_handle_t in sme_qos.
Change-Id: I47f4e41e7d8cceafd2232392f00fc0dad64fa842
CRs-Fixed: 2348550
I9d0d7d109621237f29d66f7b06c5b63c38f63fb2 (qcacld-3.0: Introduce
mac_handle_t) introduced a "better" name for tHalHandle, so replace
tHalHandle with mac_handle_t in sme_ft_api.
Change-Id: I0d185e15611597d396c00f7e6f2c3d27472426c9
CRs-Fixed: 2348549
I9d0d7d109621237f29d66f7b06c5b63c38f63fb2 (qcacld-3.0: Introduce
mac_handle_t) introduced a "better" name for tHalHandle, so replace
tHalHandle with mac_handle_t in sme_power_save.
Change-Id: I7030567c6f73abba10a3e0f29def78249fe91b5a
CRs-Fixed: 2348506
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern
name for what was previously called the tHalHandle. Transition
csr_packetdump_timer_stop() to use the new naming.
Change-Id: I420949b9d4a88c9aaec7ee768914583f17fefadb
CRs-Fixed: 2347656
Currently csr_get_current_band() takes a tHalHandle context param.
However csr is internal to the UMAC, and hence it should be using the
"real" context pointer type instead of the opaque handle, so update
the API to expect a struct mac_context pointer..
This is part of an ongoing campaign to remove or replace all instances
of tHalHandle.
Change-Id: I93a3950b9ee26284ddfdf167b900d2f6983625f7
CRs-Fixed: 2347655
The primary data structure used within the protocol stack is currently
named sAniSirGlobal. This naming is problematic for two reasons.
First, the "Ani" and "Sir" are archaic references that should be
replaced throughout the driver. Second, camelCase is frowned upon by
the Linux coding style. In order to address these issues, rename
sAniSirGlobal to mac_context.
Change-Id: Ibaaeb5296e42a24c66d4adf4f720d32a9ae41888
CRs-Fixed: 2345128
Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
Function csr_set_phy_mode() is not used. Since it is apparently
obsolete, remove it.
Change-Id: I742060a27e6501ee894348d2a915f50f550ef6da
CRs-Fixed: 2344316
Currently driver acquires wakelock for scans received from hdd.
But for RRM scan initiated from AP for beacon reports, the
wakelock is not acquired and if host goes to suspend while scan
is in progress,FW asserts.
Fix is to avoid the system suspend by taking the wakelock
before rrm scan start.
Change-Id: I02ddc9b5e6ba5f1782d00e34f044ace34c54d0b0
CRs-Fixed: 2331741
During csr stop, csr_roam_close_session try to purge all the pending
commands for the vdev. But as vdev is already logically deleted,
the cmds are not purged as the purge by vdev API fails to get the
vdev ref.
As in csr stop, driver clean up all the sme session so instead of
calling purge commands for vdev, call purge cmd for all the vdev.
Also the active command timeout for the delete vdev is 30 sec while
HDD waits for 15 sec. The active command timeout should be less
than the HDD timeout. Thus set active cmd timeout as 10 sec and
HDD timeout as 11 sec
Change-Id: I1d45de261c50f1835379a9cc1df4631f3e32f459
CRs-Fixed: 2339694
Change "qcacld-3.0: Remove sme_set_freq_band()" (Change-Id
I41eeda85754a4d2cb1971dd53eb07a86e5ff4b87") removed the only caller
of csr_set_band(). Since it is now apparently obsolete, remove it.
Change-Id: Ifcfbeecb28964aef82d6b51942436ba18282f1d7
CRs-Fixed: 2339197
Function sme_set_freq_band() is not used. Since it is apparently
obsolete, remove it.
Change-Id: I41eeda85754a4d2cb1971dd53eb07a86e5ff4b87
CRs-Fixed: 2339196
If there is no scan cache available, csr_roam_connect
will trigger a scan and after scan complete csr will
call csr_roam_issue_connect to connect one of candidate BSS.
And driver only checks the first candidate BSS's channel
for HW mode change after scan complete.
The issue is if connect first candidate failed, the next
or other candidate BSS may require DBS in concurrency
condition and the check
policy_mgr_is_hwmode_set_for_given_chnl will be failed.
To avoid such the hw mode check failed, we need to change hw
mode early if any of BSS requires DBS mode before try to
connect the BSS candidate in list one by one.
Add API csr_scan_get_channel_for_hw_mode_change which returns
DBS required candidate channel in BSS list if available,
otherwise returns the first candidate's channel.
Change-Id: I42862f100ee56ada41d6397346937219d0e688df
CRs-Fixed: 2335075
Update the SME NAN public interface as follows:
1) Move the sme_nan_event() prototype to nan_api.h
2) Fully document the interfaces (not the implementations)
3) Utilize the new mac_handle_t abstraction
4) Clean up local coding style violations
Change-Id: I7ae6fff6e4a44570463383e9f6f50731fa594192
CRs-Fixed: 2335643
Make the following updates to the extscan stop scan logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: Ie4a693b4a91d728a075cffad3ee368b22d9c5b2a
CRs-Fixed: 2335647
Make the following updates to the extscan start scan logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
3) Address a multitude of checkpatch issues
Change-Id: I68dc988fafb7e14b2b80d1007adf614ddff284e2
CRs-Fixed: 2335045
Make the following updates to the passpoint set/reset logic:
1) Exclusively use the Unified WMI data structures.
2) Refactor the vendor command processing to improve code
maintainability.
Change-Id: I39945b2cec90c3f34c81e5ca525842f1af9340f7
CRs-Fixed: 2334234
Make the following updates to the extscan set epno logic:
1) Exclusively use the Unified WMI data structures.
2) Refactor the vendor command processing to improve code
maintainability.
Change-Id: I8179fd9b9acced01956232f113d656e0137231b5
CRs-Fixed: 2333537
Enable TSF for Adrastea arch on Vipertooth chip firstly and
expose TSF time mapping via file system
CRs-Fixed: 2320218
Change-Id: Ifda0d8035717ad21edb1a393ef32f1157ab59105
Currently the command timeout value in serialization for start_bss
and stop_bss commands for SAP are set to 30 seconds which is too high.
Reduce the command timeout value for SAP start_bss and stop_bss
commands in serialization to 10 seconds.
Change-Id: I1bcfe13de92a703ec55445b344a502f7843bbed8
CRs-Fixed: 2331830
Make the following updates to the extscan get capabilities logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: I9e57c86a3da0924af01d82d626b61c28f7d520bf
CRs-Fixed: 2330211
Make the following updates to the extscan get cached results logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: I4144aa4cdb9c6d3ddaae30eedaec3096abf95857
CRs-Fixed: 2329405
VHT Part3: Add the basic infra for MLME CFG items and the APIs
to be used from other components for VHT.
Change-Id: I8cd30439d7ac3de7b550aa5042353cf30e04cbda
CRs-Fixed: 2322304
Replace usage of the below INI Items using MLME CFG instead of HDD config.
gPreventLinkDown
gSelect5GHzMargin
gEnableMemDeepSleep
gEnableCckTxFirOverride
gEnableForceTargetAssert
gEnableLpassSupport
Change-Id: Ib89272c7898db8d0c70a60640e00ca9364a9db74
CRs-Fixed: 2327025
When peer creation fails in wma_create_peer, vdev delete is sent
to the fw and then eWNI_SME_ADD_STA_SELF_RSP is sent to sme.
Here three error cases needs to be handled:
1. The vdev deletion has happened, but the cdp_detach_peer is
not done. So the data path peer remains. Also the vdev_active
flag that was set after vdev creation was not unset.
2. The eWNI_SME_ADD_STA_SELF_RSP msg handler
csr_process_add_sta_session_rsp invokes csr_roam_session_opened
which signals HDD that vdev is created successfully and hdd
calls hdd_vdev_ready and vdev related parameter set commands are
sent to FW for the deleted vdev.
3. Vdev delete is not sent for objmgr peer creation failure in
case of VDEV_TYPE_STA and release vdev object ref count.
Add cdp_vdev_detach() calls during error case and set the
vdev_active flag to false. Handle releasing vdev object ref
count in all needed error case flows.
Propagate the error in wma_vdev_attach() through
csr_roam_session_opened() to HDD and abort the vdev create.
Change-Id: Iec97122d011098fae7ae2a59864fbe8ca8a0980e
CRs-Fixed: 2322212
Currently when the supplicant sends a connect with bssid_hint and
prev_bssid, driver issues a roam_invoke (fast reassoc) command to the
FW. However, when this connect is received in the supplicant context
and if the driver is currently processing a disassoc/deauth from the
AP in the mc thread, then the CSR roam connection state would not be
associated but the HDD STA context connection state would still be
associated. In this scenario, since the disconnection is in progress
and VDEV Down might already be sent to the FW, the roam_invoke command
is ignored and FW does not send any response. However the driver
assumes that roaming is in progress and blocks all incoming scan/
connect requests from supplicant leading to a state where no further
connections can go through.
In hdd_reassoc, check the CSR Connection state also to check if
the current state is associated and then issue roam_invoke to FW.
Change-Id: I321e99b060d6ce22517a3dd604b0f4d08dd5918d
CRs-Fixed: 2319641
Remove the legacy macro definitions that are related to the
mlme cfg.
Move them to wlan_mlme_public_struct.h
Change-Id: I64f474512463d3ba7ac238b2efd0f4cf2e36999b
CRs-Fixed: 2317750
Implement the usage of MLME CFG infra for BSS Scoring related INI Items
and remove the older INI definitions from HDD.
Change-Id: I0db69138f0439131916a38176b5b21b706ff3671
CRs-Fixed: 2318320
As a part of the cfg80211_get_station command, the driver sends TX stats
(tx rate, MCS index, NSS and flags). Currently there is no support to
send the similar RX stats.
Add support to send RX stats to the framework.
Change-Id: Ic66596d118ad1395706db7638da1b4fdef7dc2d5
CRs-Fixed: 2303306
