Commit Graph

538 Commits

Author SHA1 Message Date
Max Arnold
b483b6aaa5 USB: pl2303: another product ID
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm
contains Prolific 2303 chip.
Actually their site a bit outdated - I have AlDiga AL-11U
GSM/GPRS/EDGE modem and it works with pl2303 module after adding
corresponding product ID.

By default modem uses baud rate 460800.  GSM chipset - SIMCom SIM600,
quad band 850/900/1800/1900 MHz

Device info:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=067b ProdID=0611 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
E:  Ad=81(I) Atr=03(Int.) MxPS=  10 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: Max Arnold <lwarxx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:26:14 -07:00
Mirko Bordignon
11171d1bde USB: new ftdi_sio device id
Here is a patch that adds support for the propox jtagcable II dongle
(http://www.propox.com/products/t_117.html): their PID was missing,
therefore we were not able to have the device recognized though it uses
a standard FTDI chip.

Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:42:27 -07:00
Dirk DeSchepper
72ab6414cf USB: option: add novatel device ids
This updates the option driver with a lot more novatel driver ids.

From: Dirk DeSchepper <ddeschepper@nvtl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:42:26 -07:00
Dmitry Shapin
6f6f06ee6a USB: cypress_m8: add UPS Powercom (0d9f:0002)
Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723.
In my case, this Powercom BNT800AP.

Signed-off-by: Dmitry Shapin <shapin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:42:25 -07:00
Pete Zaitcev
b507cc9710 USB: fix usb-serial generic recursive lock
Nobody should be using the generic usb-serial for anything other than
testing. Still, it's not a good thing that it's easy to lock up. There
is a traceback from NMI oopser here:
 https://bugzilla.redhat.com/show_bug.cgi?id=431379

But in short, if a line discipline has a chance to echo anything, input
can loop back a write method. So, don't call tty_flip_buffer_push from
under a lock taken on write path.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:42:25 -07:00
Sven Andersen
4ae897df80 USB: ftdi_sio - really enable EM1010PC
Add EM1010PC to ftdi_sio.c

Signed-off-by: Sven Andersen <s.andersen@cryonet.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:57:44 -08:00
Kevin Vance
546d7eec38 USB: ftdi_sio: Workaround for broken Matrix Orbital serial port
Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port
added to the ftdi_sio driver.

The device has an invalid endpoint descriptor, which must be modified
before it can be used.

Signed-off-by: Kevin Vance <kvance@kvance.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:57:44 -08:00
Daniel Kozák
85fb62a001 USB: Add support for AXESSTEL MV110H CDMA modem
Add entry for Axesstel MV110H CDMA modem (ID: 1726:1000) to option driver

Signed-off-by: Daniel Kozák <kozzi11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:57:44 -08:00
David Ludlow
11e1abb453 usb: Add support for the mos7820/7840-based B&B USB/RS485 converter to mos7840.c
Add support for the mos7820/7840-based B&B USOPTL4_2/USOPTL4_4 USB/RS485
converter to mos7840.c

Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:57:42 -08:00
Kevin Lloyd
d726fb7577 USB: serial: move zte MF330 from sierra to option
Move the Onda H600/ZTE MF33 device from the sierra driver to the option
driver.

The reason it was moved is because the sierra driver is starting to support
more and more sierra proprietary features, so it makes more sense to keep
sierra only devices in there.


Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:53 -08:00
Warren Turkal
7f4a9e8750 USB: Add another Novatel U727 ID to the device table for usbserial
Signed-off-by: Warren Turkal <turkal@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:52 -08:00
Stefan Bader
aa59e053da USB: option: Added vendor id for Dell 5720 broadband modem
this is a small patch to add support for a rebranded Novatel modem (see
http://ubuntuforums.org/archive/index.php/t-608388.html for details).

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:52 -08:00
Dan Williams
564d61d30e USB: option: Add Kyocera KPC680 ids
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:51 -08:00
Andy Shevchenko
59036e9473 USB: usb: yet another Dell wireless CDMA/EVDO modem
Add native support of the Dell wireless CDMA/EVDO modem.

# modprobe usbserial vendor=0x413c product=0x8129

Following seesion lines describe modem itself
at
OK
ati3
Manufacturer: NOVATEL WIRELESS INCORPORATED
Model: EXPEDITE ET620
Revision: M6500C-BBIRD_TLS_MINI_DELL-Q40306.166 [Aug 25 2006 14:00:00]
ESN: 0x5B39071D
+GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS

OK

Signed-off-by: Andy Shevchenko <andy@smile.org.ua>
Cc: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:48 -08:00
Oliver Neukum
2129c4e1b4 USB: Sane memory allocation in option driver
The option driver
- violates DMA coherency rules
- allocates ~16500 bytes in one chunk
This patch splits out the buffers and uses __get_free_page() to avoid
higher order allocations.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-By: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:48 -08:00
Roel Kluin
bbc5d276ec USB: ftdi_sio.c add missing '|'
add missing '|'

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:48 -08:00
Stefan Bader
8dd70705c4 USB: Fix usb_serial_driver structure for Kobil cardreader driver.
The device setup did miss to initialize the num_interrupt_out field, thus
failing to successfully complete the probe function.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable <stable@kernel.org>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:06 -08:00
Denis Cheng
b75be4abf1 USB: Use menuconfig objects
commit 04d06ad0f1 have added menuconfig support
for the whole USB Kconfig, but there are still menuconfig need for usb/serial,
usb/atm, and usb/gadget, so that the user can disable all the options in that
menu at once instead of having to disable each option separately.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:06 -08:00
Oliver Neukum
0915f490d8 USB: last abuses of intfdata in close for usb-serial drivers
these drivers abused intfdata in close() as flags for binding.
That races with reprobing of those devices. This patch fixes that by using
the flag and the locks introduced with the patch against mos7720.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:05 -08:00
Oliver Neukum
3edbc98650 USB: kl5kusb105 don't flush to logically disconnected devices
If disconnect() is called for a logical disconnect, no more IO must be
done after disconnect() returns, or the old and new drivers may conflict.
This patch avoids this by using the flag and lock introduced by the earlier
patch for the mos7720 driver.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:05 -08:00
Alan Cox
b0a239da17 USB: oti6858: cleanup
- Rename the copied buffer functions from pl2303 to oti6858 to avodi
  confusion
- Initialise speeds properly
- Use modern baud rate handling
- Remove GSERIAL/SSERIAL ioctl hacks that reference termios unlocked

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:05 -08:00
Oliver Neukum
95bef012ea USB: more serial drivers writing after disconnect
this covers the rest of the obvious cases by using the flags
and locks to guard against disconnect which were introduced
in the earlier patch against mos7720.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:05 -08:00
Oliver Neukum
e33fe4d86f USB: make sure usb serial drivers don't flush to logically disconnected devices
If disconnect() is called for a logical disconnect, no more IO must be
done after disconnect() returns, or the old and new drivers may conflict.
This patch avoids this by using the flag and lock introduced by the earlier
patch for the mos7720 driver.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:04 -08:00
Oliver Neukum
004b4f2d44 USB: fix memleak in ark3116 serial driver
in an error case memory already allocated must be freed again.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:04 -08:00
Oliver Neukum
9e3b1d8e3d USB: stop abuse of intfdata in cypress_m8
this driver uses usb_get_intfdata() == NULL as a test for disconnect().
You must not do that as this races with probe(). By the time you test
your erstwhile interface may already be somebody else's interface.
This fixes the close() method of cypress_m8 to use the recently introduced
flag and use locking against disconnect() where required in close().

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:04 -08:00
Oliver Neukum
a1cd7e99b3 USB: stop io performed by mos7720 upon close()
This fixes a problem where the mos7720 driver will make io to a device from
which it has been logically disconnected. It does so by introducing a flag by
which the generic usb serial code can signal the subdrivers their
disconnection and appropriate locking.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:03 -08:00
Greg Kroah-Hartman
504b55cc8b USB: ftdi_sio: remove very old changelog entries from the file.
People keep trying to add entries to this section of the driver for
things.  That's what the Changelog is supposed to be for, not the .c
file.


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:03 -08:00
Paul Chavent
7bd4b20c87 USB: usbserial: provide ezusb functions for an external module.
When building an external module, the ezusb_* functions are not defined
if we haven't loaded any built'in module that use them (whiteheat,
keyspan, ...).

This patch allow to build those functions even if we only have selected
the usbserial generic driver.

Signed-off-by: Paul Chavent <paul.chavent@fnac.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:03 -08:00
Kevin Lloyd
228426edac USB: sierra driver - add update dtr logic
The following improvements were made:
 - Fixed control line issue where asserting DTR on ep5 would close ep2
 - Added support for calc_num_ports (will help support future composite
   devices)

Signed-off-by: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:00 -08:00
Harald Welte
20734345b3 USB: ftdi_sio: Support for more JTAG adaptors
[PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors

There are more devices similar to the Olimex JTAG adaptor, in that the first
port of the FT2232C is used for JTAG, and only the second port is available as
UART.

I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and
added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the
OOCDlink device.

I've also updated the KERN_INFO message sent to userspace to remove the word
'olimex' and an extra '\n' that was causing an empty line in dmesg.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:00 -08:00
Alan Cox
d5f5bcd425 USB: io_ti: clean up termios handling
Don't pass NULL into termios functions when calling them internally
Remove all the crap which then checks for NULL which can't occur now
Clear CMSPAR as it is not supported
Report the baud rate back to the caller properly (See FIXME someone with
the docs)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:00 -08:00
Alan Cox
537699ef53 USB: ti_usb: termios cleanups
Remove internal NULL passing in termios code
Remove all the if checks it causes
Encode the baud rate back properly
Clear CMSPAR as it is not supported

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:00 -08:00
Alan Cox
65d063ab21 USB: mos7720: clean up termios
Remove lots of NULL checks that can no longer occur
Encode the baud rate back into the termios (again someone with docs see
FIXME to improve this further)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:59 -08:00
Oliver Neukum
e58679805d USB: fix NULL pointer dereference on drivers/usb/serial/whiteheat.c
Am Sonntag, 16. Dezember 2007 05:23:47 schrieb Andrew Morton:
> On Sat, 15 Dec 2007 07:08:52 -0800 (PST) bugme-daemon@bugzilla.kernel.org wrote:
> 
> > http://bugzilla.kernel.org/show_bug.cgi?id=9573
 
> > There's a null pointer dereference on drivers/usb/serial/whiteheat.c as
> > follows:
> > 
> > (1) line 613:  the test "if (port->tty)" implies that null is a legal value
> >     for "port->tty" at that point
> > 
> > (2) neither firm_open nor firm_purge initialize "port->tty"

drivers/usb/serial/usb-serial::serial_open() sets port->tty
The check for NULL is bogus. This patch removes the check.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:58 -08:00
Joe Perches
dc0d5c1e5c USB: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:57 -08:00
Alan Cox
d0fab0ddf3 USB: mct232: speed, new termios and compliance cleanups
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:56 -08:00
Alan Cox
e7806e366b USB: keyspan_pda: clean up speed handling
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:56 -08:00
Alan Cox
3ec466b496 USB: belkin_sa: clean up for new style termios and speed handling, plus style
A tester with actual hardware would be useful

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:56 -08:00
Sarah Sharp
fcf9e55e06 USB: pl2303: Add autosuspend support to pl2303 usb serial converter.
Signed-off-by: Sarah Sharp <saharabeara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:56 -08:00
Sarah Sharp
3e152505a5 USB: pl2303: Move pl2303 vendor specific init to probe function.
Without this fix, the pl2303 usb-serial adapter would not suspend properly
unless it had been opened first.  A pl2303 type_1 chip will still break if the
system is hibernated while the RS-232 connector is powered by another system.
This was broken before, and a reset resume does not fix it.  All other suspend
and autosuspend scenarios work with ATEN pl2303 adaptors with HX and type_1 chips.

Signed-off-by: Sarah Sharp <saharabeara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:55 -08:00
Sarah Sharp
eb44da0b3a USB: pl2303: Cleanup FISH and SOUP macros in pl2303 driver.
Replace the FISH and SOUP macros that violated the macro guidelines in CodingStyle.
Turn them into function calls with clearer variable names.

Signed-off-by: Sarah Sharp <saharabeara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:55 -08:00
Matthias Kaehlcke
241ca64fc5 USB: Edgeport USB Serial Converter: convert es_sem to mutex
Edgeport USB Serial Converter: convert semaphore es_sem to the
mutex API

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:53 -08:00
Andre Haupt
7b62cc8668 USB: cyberjack: remove a unnecessary variable.
This also fixes a sparse warning that symbol 'result' shadows an earlier one.

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:51 -08:00
Sarah Sharp
f0fbd5b9ba USB: Prepare serial core for autosuspend.
Claim the interface for a USB to serial converter when the tty is open,
and release the interface when the tty is closed.

If a driver doesn't provide a resume function, use the generic resume
instead.

Make sure the generic resume function does not submit the URBs if we're
coming back from autosuspend.  On autoresume, we know that the open
function will be called next, which will attempt to submit the URBs.  If
we submit them in the resume function, the open will fail.

This works for:
 - autosuspend
 - suspending with the tty open or closed
 - hibernate with the tty closed

A hibernate (or a suspend that causes the USB subsystem to lose power)
has issues.  If you have the tty open when you hibernate, a new tty will
be created when the device re-enumerates during resume.

Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:51 -08:00
Aristeu Rozanski
c87d6a4f67 USB: usb_serial_console: allocate fake tty and termios before calling driver open() method
The usb serial method set_termios() is called for the first time from
open() method in order to set up the termios structure with the default
device's settings, ignoring the current settings. Once it's initialized,
the next set_termios() calls will update the device with the
tty->termios settings.
Currently USB serial console code calls the driver open() method without
a tty and after that will allocate a fake tty and termios so the command
line arguments can be applied to the device
(console=ttyUSB0,115200,...). This makes the driver overwrite the
termios with the default settings and not applying the command line
options.

This patch changes usb_console_setup() to allocate the fake tty and
termios before the open() method is called.

Tested successfully with a pl2303

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:50 -08:00
Aristeu Rozanski
9a6b1efa6f USB: usb_serial: clean tty reference in the last close
When a usb serial adapter is used as console, the usb serial console
driver bumps the open_count on the port struct used but doesn't attach
a real tty to it (only a fake one temporaly). If this port is opened later
using the regular character device interface, the open method won't
initialize the port, which is the expected, and will receive a brand new
tty struct created by tty layer, which will be stored in port->tty.

When the last close is issued, open_count won't be 0 because of the
console usage and the port->tty will still contain the old tty value. This
is the last ttyUSB<n> close so the allocated tty will be freed by the
tty layer. The usb_serial and usb_serial_port are still in use by the
console, so port_free() won't be called (serial_close() ->
usb_serial_put() -> destroy_serial() -> port_free()), so the scheduled
work (port->work, usb_serial_port_work()) will still run. And
usb_serial_port_work() does:
(...)
        tty = port->tty;
        if (!tty)
                return;

        tty_wakeup(tty);
which causes (manually copied):

Faulting instruction address: 0x6b6b6b68
Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT PowerMac
Modules linked in: binfmt_misc ipv6 nfs lockd nfs_acl sunrpc dm_snapshot dm_mirror dm_mod hfsplus uinput ams input_polldev genrtc cpufreq_powersave i2c_powermac therm_adt746x snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa joydev snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc pmac_zilog serial_core evdev ide_cd cdrom snd appletouch soundcore snd_aoa_soundbus bcm43xx firmware_class usbhid ieee80211softmac ff_memless firewire_ohci firewire_core ieee80211 ieee80211_crypt crc_itu_t sungem sungem_phy uninorth_agp agpart ssb
NIP: 6b6b6b68 LR: c01b2108 CTR: 6b6b6b6b
REGS: c106de80 TRAP: 0400   Not tainted  (2.6.24-rc2)
MSR: 40009032 <EE,ME,IR,DR>  CR: 82004024  XER: 00000000
TASK = c106b4c0[5] 'events/0' THREAD: c106c000
GPR00: 6b6b6b6b c106df30 c106b4c0 c2d613a0 00009032 00000001 00001a00 00000001
GPR08: 00000008 00000000 00000000 c106c000 42004028 00000000 016ffbe0 0171a724
GPR16: 016ffcf4 00240e24 00240e70 016fee68 016ff9a4 c03046c4 c0327f50 c03046fc
GPR24: c106b6b9 c106b4c0 c101d610 c106c000 c02160fc c1eac1dc c2d613ac c2d613a0
NIP [6b6b6b68] 0x6b6b6b68
LR [c01b2108] tty_wakeup+0x6c/0x9c
Call Trace:
[c106df30] [c01b20e8] tty_wakeup+0x4c/0x9c (unreliable)
[c106df40] [c0216138] usb_serial_port_work+0x3c/0x78
[c106df50] [c00432e8] run_workqueue+0xc4/0x15c
[c106df90] [c0043798] worker_thread+0xa0/0x124
[c106dfd0] [c0048224] kthread+0x48/0x84
[c106dff0] [c00129bc] kernel_thread+0x44/0x60
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Slab corruption: size-2048 start=c2d613a0, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c01b16d8>](release_one_tty+0xbc/0xf4)
050: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=c2d60b88, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c00f30ec>](show_stat+0x410/0x428)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b

This patch avoids this, clearing port->tty considering if the port is
used as serial console or not

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:50 -08:00
Aristeu Rozanski
27680d232b USB: usb_serial_console: fix command line parsing
Currently usb serial console support ignores the device and always use
ttyUSB0.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:50 -08:00
Matthias Kaehlcke
9da0068a49 USB: TI 3410/5052 USB Serial: convert td_open_close_lock to mutex
TI 3410/5052 USB Serial: convert semaphore td_open_close_lock to the mutex
API.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:48 -08:00
Alain Degreffe
60a8fc0171 USB: add iuu_phoenix driver
Signed-off-by: Alain Degreffe <eczema@ecze.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:47 -08:00
Nate Carlson
ab91d346c8 USB: Variant of the Dell Wireless 5520 driver
I've got a Dell wireless 5520 card with a different USB ID - specifically, 8136
instead of 8137. Attached a small patch to add support, and the output of an
'ati3'.

If we could get this in, that'd be sweet.  ;)  Thanks!

nc@knight:~/tmp/linux-2.6.24-rc8/drivers/usb/serial$ lsusb | grep 8136
	Bus 001 Device 005: ID 413c:8136 Dell Computer Corp.
nc@knight:~/tmp/linux-source-2.6.23/drivers/usb/serial$ cu -l ttyUSB0 -s 115200
	Connected.
	ati3
	Manufacturer: Novatel Wireless Incorporated
	Model: Expedite EU860D MiniCard
	Revision: 10.10.04.01-01  [2007-04-11 14:07:19]
	IMEI: 011186000228043
	+GCAP: +CGSM,+DS,+ES

From: Nate Carlson <natecars@natecarlson.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:46 -08:00