Userspace disables the roam control config once it's done with
the controlled roaming. Driver should restore the params changed
by roam control config enable and proceed with roaming as per
its default behavior.
Restore the below params which are getting modified as per
the current implementation,
1. Roam trigger bitmap
2. Scoring
3. Scan period
4. Full scan period
Change-Id: I1be699825bdd798f20a3432ebccb922ade67f89b
CRs-Fixed: 2508780
Userspace can disable/enable scoring for roam candidate
selection through roam subcmd and the attribute
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_ENABLE.
Firmware supports the below configurations currently,
1. Default selection criteria where all selection criteria
are enabled and different weightages/scores are given to
different criteria.
This will be enabled when userspace doesn't specify any
candidate selection criteria.
2. Legacy candidate selection criteria where scoring
algorithm is disabled and only RSSI is considered for
roam candidate selection.
this will be enabled when userspace specify 100% weightage
for RSSI.
Rest of the combinations are not supported for now.
Update the RSO config whenever scoring is enabled/disabled
Change-Id: Ibb787ef5433eebbdd3633748135ba6e314c931b6
CRs-Fixed: 2508778
Userspace enables the roam control config and may query for it
later. In order to indicate the current status to userspace,
cache the same in struct sCsrNeighborRoamControlInfo
Change-Id: Ib535d6940df48305bda74a624604217d1f968861
CRs-Fixed: 2508777
Userspace can configure different roam triggers as defined
in qca_vendor_roam_triggers through the roam subcmd
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET and the
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS. Send the roam trigger
bitmap to firmware
Change-Id: I692110a2ae1ee5a35bb248b9138080a7dfb02cf6
CRs-Fixed: 2508776
Userspace can update the full scan period through the roam subcmd
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET and the attribute
QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD. Send the same to firmware
as part of roam scan offload command
Change-Id: I7c1046763d693faa3340b655848d3306ef92e06c
CRs-Fixed: 2508775
Configure the preferred channel list received from vendor
roam subcmd command ROAMING_SUBCMD_CONTROL_SET as dynamic channel
list to firmware. Combine this channel list with the existing
occupied channel list and send to firmware. Flush this channel
list as part of csr_cleanup
Change-Id: Ibc45291f72844331096cb460257cab6f0b0095dc
CRs-Fixed: 2507159
Currently roam channel list is directly accessed from
mac->roam.neighborRoamInfo[sessionId].cfgParams.channelInfo
in multiple APIs to set/clear.
This needs to be enhanced as as firmware supports two channel
lists(static and dynamic) for roam scan, userspace may configure
both the lists. Cleanup the APIs to accommodate both of the
channel lists. Rename the variable channelInfo of cfgParams to
specific_chan_info to suit the usage.
Change-Id: I67548bc040c2296b75b9429f5891a5251a2a88d6
CRs-Fixed: 2507157
For runtime PM if the bus is suspended driver need to consider
extra 6 sec time for bus resume.
Thus add 6 sec extra in WMI timeouts if runtime PM is supported.
Change-Id: I5515cc889a0315382bac11a33ea6f901b7af1c46
CRs-Fixed: 2507029
Currently the host driver blocks roam scan offload command to
the target if the connected akm is OWE or SAE.
Add changes to read the WMI_SERVICE_WPA3_SAE_ROAM_SUPPORT and
WMI_SERVICE_WPA3_OWE_ROAM_SUPPORT service capability advertised
by the target and set it to the mlme fw_akm_bitmap. Read this
bitmap in csr_roam_offload_scan() to allow RSO command.
Also the connected akm is sent to the target via the
WMI_AP_PROFILE command. Translate the CSR akm type for OWE and
SAE akm also.
Change-Id: I68527722ab099e0c8e1681ed64ea416b9a6e9936
CRs-Fixed: 2491021
For WPA3 SAE LFR-3.0 roaming, authentication is offloaded to the
wpa_supplicant via the host driver due to the target crypto
inavailability limitations. The target does candidate selection
and sends the WMI_ROAM_PREAUTH_START_CMDID to the driver.
Once the SAE authentication is done, the supplicant sends the
external auth NL command with the authentication status, PMKID
derived. On receiving this event, send the PMKID, bssid, auth
status to the target over WMI_ROAM_PREAUTH_STATUS_CMDID command.
The host driver decides if the external authentication event is
received for preauth candidate or for initial connection by
checking the connected state information of the csr session.
When the authentication fails with the first candidate, the
target triggers the preauth start for the next candidate. This
happens till there are no candidates available to roam.
There could be a situation where the firmware sends preauth
event for candidate1 and before the supplicant could send the
external auth command to the host driver, the candidate1 preauth
timer could have expired and firmware sends the preauth start for
second candidate. After SAE is done with second candidate also,
the supplicant sends external auth event for second candidate. So
in this situation the firmware should decide to choose the
latest candidate. The host driver here is a mere passthrough and
doesn't maintain timer for the preauth event for each BSSID to
drop the expired candidate preauth events.
Change-Id: I799a05e55a59677dfc2ddf5b55ebc888ccfea03e
CRs-Fixed: 2507003
Firmware offloads WPA3 SAE authentication to host due to the
crypto library availability limitation. Once the roam candidate
selection is done in the firmware, firmware sends the
WMI_ROAM_PREAUTH_START_EVENTID. Once this event is received, the
host driver triggers the SAE.
Add support to offload the SAE authentication from firmware to
wpa_supplicant.
Change-Id: Ie3a9e731194e1edfcd9f33ef0d601767b9485d46
CRs-Fixed: 2490201
Currently driver passes sta_id through out the call for getting the TSM
stats. Although passed, the sta_id is not used anywhere in the call
stack. As part of removing the sta_id usage, this sta_id can also be
removed safely.
Remove the usage of sta_id in get TSM stats path.
Change-Id: I1efbb1bfdc8df84e9b6a71dcd5bd39ea93ced21a
CRs-Fixed: 2484701
Currently driver passes sta_id through out the call for getting the SNR
stats. Although passed, the sta_id is not used anywhere in the call
stack. As part of removing the sta_id usage, this sta_id can also be
removed safely.
Remove the usage of sta_id in get SNR stats path.
Change-Id: I39482d8f6d8e3bd32e940a85d5592dada8f0460b
CRs-Fixed: 2503956
Remove operationChannel from structure csr_roam_profile, remove
the code where value assigning to operationChannel take place.
Change-Id: If7cd64d4d7513000181f92faabd6c863341c71f9
CRs-Fixed: 2503043
Currently the driver checks whether the device
supports antenna sharing, and if the AP is added
in the OUI framework, then the driver modifies the
nss value to 1 to avoid sending SMPS to the peer AP.
Now suppose the device does not support Antenna sharing,
but supports DBS and is helium HW, then going to DBS HW
mode would result in peer sending a SMPS frame to the peer
as the helium HW only has two antennas, and one is needed
by each MAC now.
Fix is to add a third param in force 1x1 ini which would
decide the driver should consider the antenna sharing as
mandatory or not.
Change-Id: I3ae00fcbd642c7780952d66ccbf1208335fcb077
CRs-Fixed: 2496831
Remove operationChannel from structure tagCsrRoamConnectedProfile,
remove the code where value assigning to operationChannel take place.
Change-Id: If6c034e39c63fd78e6f08ff3daa85e0432438cff
CRs-Fixed: 2499775
1) freq_list value population:
Allocate memory for freq_list within tagCsrChannelInfo
whenever ChannelList is allocated for the same struct.
Populate channel frequencies into freq_list whenever
ChannelList is populated for the same struct.
Free the memory used by freq_list whenever ChannelList's
memory is to be freed for the same struct.
2) Special treatment for sme_rrm_send_scan_result:
To ease the freq_list population within function
sme_rrm_send_scan_result, a parameter(freq_list) has
been added into the parameter list of it.
Meanwhile, all callers of the same function have been
modified to pass freq_list to it.
3) Fix a number of camel cases detected by checkpatch.
Change-Id: I732b084d3e1edfc4f26e7ed44be1c6e826be8602
CRs-Fixed: 2496716
The change 2812433 needs revert it got merged with still some
pending comments.
Change-Id: I4555d60bf0c8cea1b3a812063ee24956b07c0d8b
CRs-Fixed: 2499426
For the latest chipsets because of architecture change the
lim session for monitor mode is not required but for the
older chipsets using the mainline the lim session has to be created.
If the session is not created the channel setting to capture
the packets on the monitor interface fails.
Create the monitor session in lim for older targets.
Change-Id: Ide44201e91c2d92cddff66f563898015f9e28ca7
CRs-Fixed: 2498775
Add freq_list in tagCsrChannelInfo to replace ChannelList
Add APIs to translate between channel list and freq list
Change-Id: I2f086d9371e2ec928bbb47aa2be91d65a206f4d6
CRs-Fixed: 2492624
Add op_freq in tagCsrRoamConnectedProfile. Finally remove
operationChannel from tagCsrRoamConnectedProfile in next
few changes.
Change-Id: Ie9be4b59483412866d915448b33f8cb6cc9e2d7c
CRs-Fixed: 2489893
Add op_freq in csr_roam_profile. Finally remove
operationChannel from csr_roam_profile in next
few changes.
Change-Id: I7a3d7fe7e77b18424f487429aaa19ca1a97b8aba
CRs-Fixed: 2489914
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: I0b5d7dd5a030b70e59c8581fb51d99079b38385f
CRs-Fixed: 2477332
Driver has a stats infrastructure and all the stats related
commands are using this infrastructure and for this
target_if_mc_cp_stats_stats_event_handler is getting used.
Remove legacy implementation of stats event handler
wma_stats_event_handler and related APIs.
With this change remove unused structures also.
Change-Id: I9a892b5f7486a406654256fc2cc8177f2fafe790
CRs-Fixed: 2481937
AP may send IEs in deauth/disassoc frames as part of disconnection.
Extract the same and forward to kernel through
cfg80211_disconnected().
Change-Id: I4ef339dcd1ecff64d6bed1de35621ecce5d8030a
CRs-Fixed: 2481912
Application sends disconnect IEs to driver through vendor command
SET_WIFI_CONFIGURATION by embeding in the attribute
QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES. Extract the same and validate
to make sure it's not more than maximum IE length that can be
accomodated in deauth/disassoc frame. Cache the extracted IEs
in mlme vdev object.
Change-Id: I6c95aa1d4d8ef7d8ed3ad5be8832ef1f45c26a2f
CRs-Fixed: 2481908
Driver has a stats infrastructure and all the stats related
commands are using this infrastructure.
Remove legacy implementation for get station stats api
as part of cleanup.
Change-Id: Iadc7fceccec32e7a27c29872fb13c03f79208965
CRs-Fixed: 2480770
Driver has a stats infrastructure and all the stats related
commands are using this infrastructure.
Remove legacy implementation for congestion stats command
as part of cleanup.
Change-Id: Ia8b919ad7cea4f47d5480b9f8e0f4636783ce6c3
CRs-Fixed: 2480246
Driver has a stats infrastructure and all the stats related
commands are using this infrastructure.
Remove legacy implementation for get rssi command as part
of cleanup.
Change-Id: I7a837d780c6a1551db0929e6ec7e73daaf479429
CRs-Fixed: 2480770
Linux coding guidelines don't allow use of camel case identifiers.
So rename selfMacAddr to self_mac_addr to be in compliance.
Change-Id: Id70e00744883f9fd797da8d4bb1cf4f65c8aa9ff
CRs-Fixed: 2463827
Disable LFR2 in cld-3.2 mainline as roaming is offloaded
to firmware in LFR3. Also fix linker issues with lfr2 disabled.
Featurize LFR2 properly with adding correct header files
and bringing LFR2 only functions under WLAN_FEATURE_HOST_ROAM
compile time flag.
Change-Id: Iac81b693feaab503d371753a4d16cc3e70df2a87
CRs-Fixed: 2459786
Optionally set by userspace to request the driver not to resume
beacon reporting after a pause is completed, when the
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START.
If this flag is set, the driver will not resume beacon reporting
after beacon reporting pause is completed. Userspace has to
send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order
to initiate beacon reporting again.
If this flag is set in the recent
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the
subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any)
the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be
set by the driver.
Change-Id: I371a218cb513dcb077b7df675c549818c2b657b2
CRs-Fixed: 2466480
In order to process QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING
vendor command, driver sends remove beacon filter cmd to fw to
allow fw to send all beacons of connected AP to driver.
But in some cases fw may wakeup host in wow mode.
To avoid these cases, with this change beacon reporting feature
will use WMI_VDEV_PARAM_NTH_BEACON_TO_HOST
command to FW instead of WMI_RMV_BCN_FILTER_CMDID
With WMI_VDEV_PARAM_NTH_BEACON_TO_HOST, in case of active reporting,
fw should send all beacons of connected AP to HOST
and also no wakeup of driver should happen in wow mode.
Change-Id: I9d0e255a6d4accb523bf4613146574239e7e0d09
CRs-Fixed: 2471627
Command timeouts for VDEV stop and PEER assoc/delete is 2 sec, which
doesn't consider delays in scheduling.
To consider scheduling delays set these values to 4 sec and change
the serialization and HDD timeouts accordingly.
Change-Id: Ifc8ca857727a7e73bbae586c0728816024f1c687
CRs-Fixed: 2472122
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447360
eCsrAuthType is the enum of AKMs to be used during connection.
So the name eCsrAuthType is misleading as akm and auth algo are
different.
Also the Linux Coding Style doesn't allow mixed-case names and
so-called Hungarian notation, so rename the enum eCsrAuthType to
be compliant.
Change-Id: I35e18d1f84babd0ef2928ae9d7258028d4c9b3c5
CRs-Fixed: 2463813
The Linux Coding Style doesn't allow mixed-case names and
so-called Hungarian notation, so rename the pMsgBuf to be
compliant.
Change-Id: Ia28e9e8ce69c7fbb6853278ccdb12e722ec24e06
CRs-Fixed: 2463442
The Linux Coding Style doesn't allow mixed-case names and
so-called camelcase notation, so rename the statusCode to be
compliant with the coding style.
Change-Id: I98e0af710401a9718bdc1402617253eb970c5861
CRs-Fixed: 2463825
The Linux Coding Style doesn't allow mixed-case names and
so-called Hungarian notation, so rename the identifier pBssDesc
to be compliant.
Change-Id: I0980de75bbaaeb1eee9321621da1f3ff90e09188
CRs-Fixed: 2463446
Add support for roaming in case the driver
detects a nud failure. The STA then would roam
to another BSSID, else if the roaming gets failed
the STA would remain connected to the same BSSID
as connected before.
Change-Id: Idbc99b0ce2f9cacd97564dd8cf9892120958eda2
CRs-Fixed: 2461675
Link BLM exposed APIs to the following:-
1. csr_get_scan_result:- Link this API with filter bssids in
the reject ap list maintained by the blacklist mgr.
2. lim_assoc_rej_add_to_rssi_based_reject_list:- Link this API
with the the blacklist mgr add bssid to reject list to add the
OCE and BTM related assoc rejects.
3. Userspace avoid list parsing logic for the userspace to set
the BSSID as avoided.
Change-Id: Id51ffb80cea3f845fefe14db25d0f7acda6ea0f3
CRs-Fixed: 2461281
The linux coding style forbids use of typedef unless clearly
some rules are met. The tSirBssDescription doesn't match any of
those criteria, so replace it with underlying structure
bss_description.
Change-Id: I36ad517325117cf04d499c7c472ca6ef5921a85d
CRs-Fixed: 2459769
The Linux Coding Style doesn't allow mixed-case names so rename
eSirBssType in struct pe_session to be in compliance.
Change-Id: Iafe6649a130c77064180c67fb1385d2d7a763370
CRs-Fixed: 2459767
In hdd_vdev_destroy, if policy_mgr_check_and_stop_opportunistic_timer
decides to move to single mac mode and while sending the HW mode change
the target goes down, this leads to timeout of the HW mode change req in
WMA layer which is 2 sec and in serialization its 4 sec, but
policy_mgr_check_and_stop_opportunistic_timer timeout in 1 sec and proceed
to sme_close_session and wait for it to complete.
sme_close_session queue WLAN_SER_CMD_DEL_STA_SESSION to serialization but
it remains in pending queue, behind HW mode change req.
Now due to SSR the wait event for sme_close_session is set and thus
hdd_vdev_destroy logically deletes the vdev.
Now on WMA timeout the HW mode change try to remove the request from
serialization which it fails to remove as it fails to get ref for vdev
with vdev being logically deleted.
Thus WLAN_SER_CMD_DEL_STA_SESSION is not processed and is flushed in
hdd_wlan_shutdown.
Thus as SSR WLAN_SER_CMD_DEL_STA_SESSION is flushed from serialization
queue, the wma_vdev_detach() is not called for that vdev and thus the
peer attached to the vdev are not deleted and wma vdev ref is also not
released, this lead vdev/peer ref leak.
To fix this update the wait timeout in
policy_mgr_check_and_stop_opportunistic_timer with proper value higher
than the serialization timeout for the HW mode change request. ALso
set the wait event in policy_mgr_pdev_set_hw_mode_cb in failure cases
as well to avoid timeout in case of hw mode change failures.
Also release pending peer and vdef refs in wma_wmi_service_close.
Change-Id: I5ddf8263b0dbf889be506332a67f5e18c1bfb111
CRs-Fixed: 2458034
Userspace request driver to report details of each beacon
received whose bssid is same as currently connected BSS's
mac address. The driver encapsulates the details of these
beacons as an asynchronous event within vendor command:
QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with operation
type QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP until
userspace requests to stop sending beacons.
When driver gets stop indication from userspace, it does
the following things:
1. De-register all callback which is registered while handling
start indication
2. Add beacon filter and send it to fw
If driver is in WOW mode and WMI_ADD_BCN_FILTER_CMDID is
NOT configured, fw wakeup HOST and sends connected AP beacon.
Fw should not wakeup host if host is in wow mode. In order
to support this, configure WOW_BEACON_EVENT for STA and P2P.
Change-Id: Ie7c768fa957d02e1361e1ecb95435ba3f06034b0
CRs-Fixed: 2431360
