Return PDC_OK when device registration fails so that we enumerate all
subsequent devices, even when we get two devices with the same hardware
path (which should never happen, but does with at least one revision of
rp8400 firmware).
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Document clobbers and args in entry.S and syscall.S.
entry.S: Add comment to indicate that cr27 may recycle and EDEADLOCK
detection is not 100% correct. Since this is only enabled when using
ENABLE_LWS_DEBUG, the user is warned by the comment.
Signed-off-by: Carlos O'Donell <carlos@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Make the "redirecting irq" message to not display on the console by
setting the severity to KERN_DEBUG. The console was basically unusable.
Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
irq_affinityp[] only available for SMP builds, make code that uses
it conditional on CONFIG_SMP.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This really only adds them for the machines I can check SMP on, which
is CPU interrupts and IOSAPIC (so not any of the GSC based machines).
With this patch, irqbalanced can be used to maintain irq balancing.
Unfortunately, irqbalanced is a bit x86 centric, so it doesn't do an
incredibly good job, but it does work.
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Since irq.c uses smp_send_all_nop, we must define it for UP builds
as well. Make it a static inline so it gets optimized away. This forces
irq.c to include <asm/smp.h> though.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Fix our interrupts not to use smp_call_function
On K and D class smp, the generic code calls this under an irq
spinlock, which causes the WARN_ON() message in smp_call_function()
(and is also illegal because it could deadlock).
The fix is to use a new scheme based on the IPI_NOP.
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Disable nesting of interrupts - still has holes
The offending sequence starts out like this:
1) take external interrupt
2) set_eiem() to only allow TIMER_IRQ; local interrupts still disabled
3) read the EIRR to get a "list" of pending interrupts
4) clear EIRR of pending interrupts we intend to handle
5) call __do_IRQ() to handle IRQ.
6) handle_IRQ_event() enables local interrupts (I-Bit)
7) take a timer interrupt
8) read EIRR to get a new list of pending interrupts
9) clear EIRR of pending interrupts we just read
10) handle pending interrupts found in (8)
11) set_eiem(cpu_eiem) and return
[ TROUBLE! all enabled CPU IRQs are unmasked. }
12) handle remaining interrupts pending from (3)
e.g. call __do_IRQ() -> handle_IRQ_event()..etc
[ TROUBLE! call to handle_IRQ_event() can now enable *any* IRQ. }
13) set_eiem(cpu_eiem) and return
The problem is we now get into ugly race conditions with Timer and IPI
interrupts at this point. I'm not exactly sure what happens when
things go wrong (perhaps nest calls to IPI or timer interrupt?).
But I'm certain it's not good.
This sequence will break sooner if (10) would accidentally leave
interrupts enabled.
I'm pretty sure the right answer is now to make cpu_eiem
a per CPU variable since all external interrupts on parisc
are per CPU. This means we will NOT need to send an IPI to
every CPU in the system when enabling or disabling an IRQ
since only one CPU needs to change it's EIEM.
Thanks to James Bottomley for (once again) pointing out the problem.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Fix a longstanding smp bug
The problem is that both the timer and ipi interrupts are being called
with interrupts enabled, which isn't what anyone is expecting.
The IPI issue has just started to show up by causing a BUG_ON in the
slab debugging code. The timer issue never shows up because there's an
eiem work around in our irq.c
The fix is to label both these as SA_INTERRUPT which causes the generic
irq code not to enable interrupts.
I also suspect the smp_call_function timeouts we're seeing might be
connected with the fact that we disable IPIs when handling any other
type of interrupt. I've put a WARN_ON in the code for executing
smp_call_function() with IPIs disabled.
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Export mace symbol so that it can be used in modules.
Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Unfortunately, using PAGE_SHIFT in asm/arch/memory.h is unsafe, and we
can't include asm/page.h into this file because then we have a circular
dependency. Move the offending code to arch/arm/common/sa1111.c
instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Ben Dooks
Minor changes, including add SysRq, selecting the DM9000
as a built-in driver, not as a module, and selecting the
framebuffer.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Ben Dooks
Make the use of , on the lsat entry structs consistenent
through arch/arm/mach-s3c2410/mach-bast.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since we want new platforms to use debug-macro.S, make the decompressor
debugging method default to using this include file rather than having
new platforms add to an #if defined().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move __io_address to arch-realview/hardware.h, drop core.h from platsmp.c
and localtimer.c, and include asm/io.h where required.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The vDSO functions should have the same calling convention as a syscall.
Unfortunately, they currently don't set the cr0.so bit which is used to
indicate an error. This patch makes them clear this bit unconditionally
since all functions currently succeed. The syscall fallback done by some
of them will eventually override this if the syscall fails.
This also changes the symbol version of all vdso exports to make sure
glibc can differenciate between old and fixed calls for existing ones
like __kernel_gettimeofday.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Building ARCH=ppc for multiplatforms with CONFIG_CHRP not set fails
due to some unshielded code in xmon
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This also extends the code to handle 32-bit ELF vmlinux files as well
as 64-bit ones. This is sufficient for booting on new-world 32-bit
powermacs (i.e. all recent machines).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Hi,
The previous PowerBook patch didn't contain the feature table updates
for ARCH=powerpc. Here they are.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The merge of machine types broke boot with yaboot & ARCH=ppc due to the
old code still retreiving the old-syle machine type passed in by yaboot.
This patch fixes it by translating those old numbers. Since that whole
mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the
new prom_init that the merged architecture now uses for both ppc32 and
ppc64 (after 2.6.15)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
I discovered that in some cases (PowerMac for example) we wouldn't
properly map the PCI IO space on recent kernels. In addition, the code
for initializing PCI host bridges was scattered all over the place with
some duplication between platforms.
This patch fixes the problem and does a small cleanup by creating a
pcibios_alloc_controller() in pci_64.c that is similar to the one in
pci_32.c (just takes an additional device node argument) that takes care
of all the grunt allocation and initialisation work. It should work for
both boot time and dynamically allocated PHBs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Somewhere we lost the include of udbg.h in lmb.c. While we're there, add a DBG
macro like every other file has and use it in lmb_dump_all().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Currently 8xx fails to boot due to endless pagefaults.
Seems the bug is exposed by the change which avoids flushing the
TLB when not necessary (in case the pte has not changed), introduced
recently:
__handle_mm_fault():
entry = pte_mkyoung(entry);
if (!pte_same(old_entry, entry)) {
ptep_set_access_flags(vma, address, pte, entry, write_access);
update_mmu_cache(vma, address, entry);
lazy_mmu_prot_update(entry);
} else {
/*
* This is needed only for protection faults but the arch code
* is not yet telling us if this is a protection fault or not.
* This still avoids useless tlb flushes for .text page faults
* with threads.
*/
if (write_access)
flush_tlb_page(vma, address);
}
The "update_mmu_cache()" call was unconditional before, which caused the TLB
to be flushed by:
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
if (!PageReserved(page)
&& !test_bit(PG_arch_1, &page->flags)) {
if (vma->vm_mm == current->active_mm) {
#ifdef CONFIG_8xx
/* On 8xx, cache control instructions (particularly
* "dcbst" from flush_dcache_icache) fault as write
* operation if there is an unpopulated TLB entry
* for the address in question. To workaround that,
* we invalidate the TLB here, thus avoiding dcbst
* misbehaviour.
*/
_tlbie(address);
#endif
__flush_dcache_icache((void *) address);
} else
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
Which worked to due to pure luck: PG_arch_1 was always unset before, but
now it isnt.
The root of the problem are the changes against the 8xx TLB handlers introduced
during v2.6. What happens is the TLBMiss handlers load the zeroed pte into
the TLB, causing the TLBError handler to be invoked (thats two TLB faults per
pagefault), which then jumps to the generic MM code to setup the pte.
The bug is that the zeroed TLB is not invalidated (the same reason
for the "dcbst" misbehaviour), resulting in infinite TLBError faults.
The "two exception" approach requires a TLB flush (to nuke the zeroed TLB)
at each PTE update for correct behaviour:
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch should fix the crashes we have been seeing on 64-bit
powerpc systems with a memory hole when sparsemem is enabled.
I'd appreciate it if people who know more about NUMA and sparsemem
than me could look over it.
There were two bugs. The first was that if NUMA was enabled but there
was no NUMA information for the machine, the setup_nonnuma() function
was adding a single region, assuming memory was contiguous. The
second was that the loops in mem_init() and show_mem() assumed that
all pages within the span of a pgdat were valid (had a valid struct
page).
I also fixed the incorrect setting of num_physpages that Mike Kravetz
pointed out.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Our performance validation on 2.6.15-rc1 caught a disastrous performance
regression on ia64 with netperf (-98%) and volanomark (-58%) compares to
previous kernel version 2.6.14-git7. See the following chart (result
group 1 & 2).
http://kernel-perf.sourceforge.net/results.machine_id=26.html
We have root caused it to commit 64c7c8f885
This changeset broke the ia64 task resched notification. In
sched.c:resched_task(), a reschedule IPI is conditioned upon
TIF_POLLING_NRFLAG. However, the above changeset unconditionally set
the polling thread flag for idle tasks regardless whether pal_halt_light
is in use or not. As a result, resched IPI is not sent from
resched_task(). And since the default behavior on ia64 is to use
pal_halt_light, we end up delaying the rescheduling task until next
timer tick, and thus cause the performance regression.
This fixes the performance bug. I'm glad our performance suite is
turning up bad performance bug like this in time.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This avoids a BUG_ON with kref.c when SA1111 tries to register
a driver with an unregistered bus type.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A variable was being used in multiple conflicting ways. I also restructured
the code a bit for clarity.
Signed-off-by: Miles Bader <miles@gnu.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These exported symbols are in arch/ppc/ but missing from arch/powerpc/ for
ppc32 builds.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A patch by Eric was merged (f2b36db692)
and later on reverted back (1e4c85f97f).
Along with above patch, another patch was posted and has been merged
(3d1675b41b). That patch was dependent on
the above patch and now it should also be reverted.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
