Replace channel ID with frequency in struct hdd_channel_info
& oem_channel_info.
Change-Id: I1a14ab40da4824d2861a7ec862cc322a158f0cd1
CRs-Fixed: 2532299
Currently, operating channel is populated for hdd_config
In 6G channel numbers can be same with 2G/5G
which can lead to erroneous behaviour in case of 6G.
Fix is to add operating frequency list in structure hdd_config
as frequency will always be unique.
Change-Id: I3f21b75c6763054afd42df6ea13d5ce96b0ed0a8
CRs-Fixed: 2517114
This is a propagation of qcacld-2.0 commit 98821c7dcf49d ("qcacld-2.0:
Add CONFIG_MULTI_IF_LOG to support multi if log"). Add CONFIG_MULTI_IF_LOG
to support multi if log by assigning the specific netlink protocol
when dual wlan cards are loaded.
Change-Id: I3ea9574899c23a8d2ebbdea5b958cc3ad7947fe5
CRs-Fixed: 2525483
It need rx chainmask to select noise floor when start spectral gen3
scan and rx data by DMA. So set rx chainmask before start spectral
scan.
Change-Id: I63efd8f5384537b5697ba809bb05fdd17e243210
CRs-Fixed: 2519366
Spectral tool is required to compatible with different version of
spectral, so add version information in SPECTRAL_SCAN_REGISTER_RSP.
Change-Id: Id766d95463e511209c752a428761fe7f1380c53e
CRs-Fixed: 2495259
To pass WFA 11N 4.2.25 case, it's needed to enable legacy mode
SIFS burst. So add INI to make SIFS burst mode configurable.
Change-Id: I740fe33a7ae0d9b558aa3b3aeee434f482ed24cb
CRs-Fixed: 2486171
Add a wait for PM freeze when wifi is turning on to make sure file system
and QMI are still accessible before attempting to download the FW and
trigger a QMI handshake with FW.
Change-Id: Ia2f3dc28abb9cab4b5dd8038ea02ac016eb74bbb
CRs-Fixed: 2521009
Add timing profiling log for runtime PM operations such that we can
know how much time each operation is taking.
Change-Id: Iad2aca8e8bb2f0dadc14d24e3a5c2b03938df9df
CRs-Fixed: 2518935
a. when T-put < 18Mbps, do GRO/GRO flush for each RX packet.
b. when T-put can kept stable (18Mbps ~ 60 Mbps) last >= 1 second ,
skip GRO flush logic.
Change-Id: Ic8075f10f72b479c6941d7ac12a71fd90f945094
CRs-Fixed: 2509672
Use "client mac address" in bootp protocol to get
station id to handle scenarion when
DHCP exchanges(discover/offer/request/ack) happens
with broadcast address as destination address.
Change-Id: Ie233b2ffed1533f0a45fded199bb09649e48b4dd
CRs-Fixed: 2506023
Currently the function hdd_roam_deregister_tdlssta is not declared
as static when the macro FEATURE_WLAN_TDLS is not defined. This can
cause a multiple definition error.
Declare the function as static so as to avoid this build time error.
Change-Id: Id85f8bed57a7bdfbeac5722ea687066f7f74a50f
CRs-Fixed: 2511744
Add configuration for gpio pin used to send strobe to wlan hw.
The host driver will latch the current time and toggle the gpio
to generate a strobe to wlan hw.
The tsf will be latched on detecting the strobe and it will be
made available in a register for sw access.
The wlan fw will read this tsf and report it to driver using tsf event.
Change-Id: I4365d97d22836ddbbd2bf9913d4f723e5a870369
CRs-Fixed: 2495152
The mapping of sta_id to the adapter in hdd context stores the adapter
with respect to the corresponding sta_id. Currently, the mapping is not
used anywhere in the driver even though the adapters are stored in it.
As there is no usage for the mapping, remove it as a part of sta_id
cleanup effort.
Change-Id: I26590a69e61d82f723a83eb3f9f24c42afa6c5a2
CRs-Fixed: 2511767
Currently, the API cdp_fc_get_tx_resource takes as input the sta_id. As a
part of cleaning up the usage of sta_id, replace it by peer mac address.
Change-Id: I7b81a05d312da84aa16c82f0f6152710daf986c5
CRs-Fixed: 2507274
Convert channel to freq in hdd_connection_info, so
remove unused 'channel' and rename 'freq' to 'chan_freq'.
Change-Id: I0d3fd39f9ac3c2303729b27b7c97385097c82104
CRs-Fixed: 2508791
Currently, cdp_peer_get_vdev_by_sta_id takes as input the sta_id. As a
part of cleaning up the usage of sta_id, replace it by peer mac address.
Change-Id: Ibb7f3489899ac3fda48ad5e54891cd2d7623c6c8
CRs-Fixed: 2507219
Update the mac, phy, mcs, nss caps of bands
2.4ghz, and 5ghz for HE capabilities in the
wiphy structure to inform userspace about
the driver capability.
Change-Id: I9fb1233e5396bf3ea411c057af9cbcd5b358271c
CRs-Fixed: 2486266
Currently, the cdp API cdp_clear_peer takes as input the sta_id. As a
part of cleaning up the usage of sta_id, replace it by peer mac address.
Change-Id: I4f8bee21ae42d8c9929da8fe2fcfa534778647ed
CRs-Fixed: 2503139
Wifi turn-on will timeout and fail if system suspend occurs during idle
restart. To solve this, abort system suspend during idle restart.
Change-Id: I0a4a1fc9525b5fb19f51a289ca0b8a76c73038e6
CRs-Fixed: 2506716
Currently the function hdd_get_peer_idx is not being called from
anywhere. As the use of sta_id is being depreceted, the function can be
safely removed.
Clean up the unused function.
Change-Id: I6896d03ad2e8b427147e2259b737836cd3f44ca0
CRs-Fixed: 2484699
1) Remove channel from struct hdd_mon_set_ch_info. All client
code will use freq within the same struct from now on.
2) Replace the usage of channel ID(op_chan) with channel
frequency(op_freq) in function hdd_mon_select_cbmode's
parameter list.
3) Fix a number of camel cases detected in function
hdd_select_cbmode.
Change-Id: Ib7c1ee453b34647e983749a713b33017b92103ac
CRs-Fixed: 2504779
Currently for NDI interface bus bandwidth timer is not
started. As part of this change start the timer when new
ndp peer is created and stop the timer when last ndp peer
connected is deleted.
Change-Id: Ia710ec9872636ee3cefa30815692c2f8c9816687
CRs-Fixed: 2499548
Modify the nud tracking ini so that the driver
does a disconnection/roaming after NUD failure
is detected.
According to the ini specified, the driver would
either disconnect or do roaming.
Change-Id: I6af1c819322a702605d92ada735298a124127533
CRs-Fixed: 2497153
Replace pre_cac_chan with pre_cac_freq and mon_chan
with mon_chan_freq in struct hdd_adapter.
Change-Id: I413ff83c244e1ebb7deaa2dec52df76b4b957f53
CRs-Fixed: 2496812
Featurize DHCP indication for SAP and disable it
for QCN7605 as this feature is broken for HL
Data Path.
Change-Id: If1db649131d887a2aab18461187403b4b9a2c5b4
CRs-Fixed: 2496032
Add channel frequency(freq) into struct hdd_mon_set_ch_info and
populate its value where channel in the same structure is
populated.
Remove a few camel cases detected by checkpatch.
Change-Id: I5f0d64a88c054476739bc06887bffd37238b10fc
CRs-Fixed: 2496707
Currently when driver gets a command to dump the
driver info, it allocates the memory and retrieves
the information in that allocated memory. Maximum data
that can be copied to user space buffer is equal to
one PAGE_SIZE. In the command driver gets the size of
the data which user space wants to read, minimum of the
user space requested size or one PAGE_SIZE of the data
is copied to user space buffer and current position of
the driver buffer till which the data is copied is
updated to user space is also updated.
Driver copies the retrieved information to the user
space buffer as explained above and updates the position
pointer to the user space. In the next request driver
expects from user space to request the remaining data
from the updated position in last request, once all the
data is copied to user space, driver frees internally
allocated memory.
In case if driver does not get the request to read
remaining data after first request, it does not free
the memory. Current handling of this memory is done
in init domain after stop modules, but since this
memory is allocated in active domain, driver should free
the memory in active domain.
Since with current implementation memory allocated in
active domain is not freed in active domain, memleak is
getting detected.
To resolve above issue, move mem cleanup logic for
driver dump info command from init domain to active domain in stop
modules.
Change-Id: Idb4f35f0a599ad55eebe13348b68562fa401fd7e
CRs-Fixed: 2489877
The bExplicitCfg bitmap in struct hdd_config was originally used to
track which INI items had been explicitly configured from the INI
file. But now that the INI processing is distributed this bitmap is no
longer used, so remove it.
Change-Id: I101ffa82b3309209cdc2eea954d1467b68b6138d
CRs-Fixed: 2496393
As per existing design, dp rx mic error information is
posted to HDD via SME. HDD inturn indicates the mic error
to supplicant.
Define new HDD callback hdd_rx_mic_error_ind for
rx mic error, registered through the CDP API
cdp_register_rx_mic_error_ind_handler. This will
enable datapath to directly post mic error info to HDD,
eliminating processing by corestack.
Change-Id: I6561dc5e66e7059c249c1eeeabdbf754989221d2
CRs-Fixed: 2488455
When wifi is turned off, system suspend might occur during the timer delay,
which would stop the timer and prevent wifi from being turned off, leading
to battery drain. To fix this issue, prevent the suspend and turn off the
wifi before allowing suspend to happen.
Change-Id: Id4fbb13f3ab350b4e2545f65e38d9baaba5ed7ab
CRs-Fixed: 2493487
During idle restart, system suspend is happening, which is leading
to timeout because idle restart task is frozen during system suspend.
To avoid the timeout, add a wakelock for idle restart to prevent
system suspend.
Change-Id: Iffb6151452680df8cb4fb98e8646112e780881f8
CRs-Fixed: 2490321
Add additional bandwidth level for "very high" bandwidth. As per the
default configuration if the total number of tx/rx packets exceeds
bus_bw_very_high_threshold, the bus bandwidth requirement is designated
as PLD_BUS_WIDTH_VERY_HIGH and PLD API is called with this value.
Default value of 7000 is chosen for bus_bw_very_high_threshold, which
amounts to 820Mbps of throughput considering a 1500 byte packet and
100ms bandwidth timer interval.
Change-Id: I3bd904429a02ec4935ba12da7c2cfd37eec738ed
CRs-Fixed: 2489362
As requirement, it's also needed to print country code in iwpriv
getChannelList under hostapd mode, align the output of getChannelList
in sta/hostapd mode. At the same time, in __iw_get_channel_list(),
the wrqu->data.length should be (the actual channel number+1), not
sizeof(struct channel_list_info), otherwise there would be many
zeros if call iw_get_channel_list() directly.
Change-Id: I1e0fc1a026bf6c3fff2947ab4712a1800214ec0c
CRs-Fixed: 2476458
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: I0b5d7dd5a030b70e59c8581fb51d99079b38385f
CRs-Fixed: 2477332
FW version information which driver used to get
is updated to add release branch version also.
To give that information to userspace, parse the
release branch information also from the extended
FW version.
Change-ID: I45d06bac5ef0e57d1db8dbfe7ff6a0d7e2144b88
CRs-Fixed: 2482835
Driver has a stats infrastructure and all the stats related
commands are using this infrastructure.
Remove legacy implementation for congestion stats command
as part of cleanup.
Change-Id: Ia8b919ad7cea4f47d5480b9f8e0f4636783ce6c3
CRs-Fixed: 2480246
Update default value of force max nss action OUI ini
to include AP that advertises rx nss as 1 before
connection and advertises rx nss as 4 in association
response and in beacons or probe responses immediately
after connection.
Change-Id: Ica6314547a2aa39d4887ac4231745d6a59cd6b0a
CRs-Fixed: 2466562
Driver is updating wiphy band capabilities incorrectly as
it is always updating 2G band as always supported, in case
if 2G band is disabled from ini "BandCapability", driver
should not update 2G band capabilities to wiphy.
To avoid above issue, add a api to check if 2G band is
supported and then only update 2G band capabilities to
wiphy.
Change-Id: Ib921fa106158d93bfdb7aa57cfd5aa4370fab7d8
CRs-Fixed: 2470067
qcacld-2.0 to qcacld-3.0 propagation
This change adds support for driver supported TCP
delayed ack to increase TCP RX performance in
third-party platform which does't support kernel
TCP delayed ack feature.
TCP delayed ack is dependent on count and timer
values. Whatever is achieved first will trigger
sending TCP ack.
This feature can be controlled through ini values.
gDriverDelAckTimerValue - timer value in ms
gDriverDelAckPktCount - delayed ack count
gDriverDelAckEnable - enable/disable feature
Change-Id: I8105bbb90965295b5a4aefeb00d344a90155974d
CRs-fixed: 2414224
Optionally set by userspace to request the driver not to resume
beacon reporting after a pause is completed, when the
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START.
If this flag is set, the driver will not resume beacon reporting
after beacon reporting pause is completed. Userspace has to
send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order
to initiate beacon reporting again.
If this flag is set in the recent
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the
subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any)
the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be
set by the driver.
Change-Id: I371a218cb513dcb077b7df675c549818c2b657b2
CRs-Fixed: 2466480
In order to process QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING
vendor command, driver sends remove beacon filter cmd to fw to
allow fw to send all beacons of connected AP to driver.
But in some cases fw may wakeup host in wow mode.
To avoid these cases, with this change beacon reporting feature
will use WMI_VDEV_PARAM_NTH_BEACON_TO_HOST
command to FW instead of WMI_RMV_BCN_FILTER_CMDID
With WMI_VDEV_PARAM_NTH_BEACON_TO_HOST, in case of active reporting,
fw should send all beacons of connected AP to HOST
and also no wakeup of driver should happen in wow mode.
Change-Id: I9d0e255a6d4accb523bf4613146574239e7e0d09
CRs-Fixed: 2471627
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447360
Add QCA_LL_PDEV_TX_FLOW_CONTROL for both
QCA_LL_LEGACY_TX_FLOW_CONTROL and QCA_LL_TX_FLOW_CONTROL_V2
disabled platform, avoid frame drop in driver which leads to bad TCP
TX throughput. Change NUM_TX_QUEUES to 5 for this case to avoid invalid
memory access in wlan_hdd_netif_queue_control().
Change-Id: Ifa649e31a41d1bf89eadc8cc7e9520f0e27b9fe4
CRs-Fixed: 2466996
