Enable RX buffer pool support for QCA6750. This will be utilized
during low memory conditions.
Change-Id: I8cee1e0996c81f3c4c408a22923d5107f4d014c3
CRs-Fixed: 2731507
It is required to enable blacklist manager to pass some case like
OCE-5.6.1, RSSI-based Association Rejection.
Change-Id: Iffae667851b63b8c28f9eadb9519c9172270c244
CRs-Fixed: 2741521
Dynamic rx aggregation feature depends on the context
id which is obtained from the packet context block.
This context id is invalid when this feature is not
enabled, and hence can lead to out of array access/write
leading to memory corruption.
Fix this issue by not using the context id when the dynamic
rx aggregation feature is not enabled.
Change-Id: Ie551217409b0f5aa2f704f9c617949e0d42a74d0
CRs-Fixed: 2742653
Enable the sanity check for rx descriptor nbuf
even for the perf build.
Also enable the rx rings history.
Change-Id: Ib127029009d0657ea51d3592af6a42f3de210c16
CRs-Fixed: 2739120
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
Add the cnss2 module config to the Genoa perf defconfig
to support cnss2 as dynamic loadable kernel module
Change-Id: I3410bf129edbe7d766a490e6fa104469a18f1187
Rename file name and modify function names to keep it inline
with sysfs attribute name 'stats'
Change-Id: Iffc390d4865977f9eff72a6a4bcf708c014f482e
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'range_ext'
Change-Id: Icf7ebbbcf1b8b219e64d1c9b98f1946069f91322
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'wlan_dbg'
Change-Id: I7d0e7b67afa701abd64efb62012c218ee4ab158d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'fw_mode_config'
Change-Id: Ia389fa8807bbd0e58de58c503d9f3bbbef9ec707
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'scan_config'
Change-Id: I6621cbe5571541d073072ef9e0348d771fd3bc4a
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'radar'
Change-Id: If13effc45323f5a286d8aeb7a8e27848cb3e618b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tx_stbc'
Change-Id: I274c1405fab7385202431b48d65603c38783222b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tdls_peers'
Change-Id: If6aa504dccd22ce0ccff11f3d73ffb1eedb5895c
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'sta_info'
Change-Id: Ibb13c1496ea1dd5bc3b024b99414ac8d72db3be6
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'temperature'
Change-Id: I8f31d59be9954d3ffe1ff7c11d16dd24b9e2644d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'monitor_mode_channel'
Change-Id: Ic207d6e29c14a0b33ed4982d533a78729d32a4ba
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'channel'
Change-Id: I9c73e572bdb80edc3431180448dffd9843d6a720
CRs-Fixed: 2731064
Enable support for LL mode feature on QCS40x platform in default
config. This feature also requires PM_QOS config to be set.
Change-Id: I49b74d905d2f84b9e15e7ba5d75d719124e818f5
CRs-Fixed: 2731679
Currently connection manager feature flag is disabled with the
comment line which is not the correct way to enable/disable the
feature.
Correctly disable the connection manager feature flag.
Change-Id: If39a945ea4d2c185d6231d0967688a8e243bd8fe
CRs-Fixed: 2731718
ICNSS2 platform driver is used for moselle and adrastea which uses
IPCI and SNOC PLD layer, respectively. Add support to enable both
for ICNSS2 based to target flag.
Change-Id: I06fbacade99b09c9ea7347aa28e10968eaeedaa8
Add PLD functions for Runtime suspend and resume callbacks,
and enable Runtime PM support for Moselle.
Change-Id: Ie990334c0c60892ec0f0ad6fac3253b3d326a919
CRs-Fixed: 2720832
ext-wow feature never supported/tested on MCC, and there
is no known customer using this feature, so compile it out.
Change-Id: I3c79ebecd5b2a44cfa9339748bf8e94f596e71bd
CRs-Fixed: 2680331
The wlan_mem_stats node will print the DMA, SKB and heap
memory allocated in the wlan host driver. This is applicable
to perf and defconfig builds.
File path to new node is:
/sys/kernel/wifi/wlan/wlan_mem_stats
Change-Id: Ic05423d362de1ef07a3ecbdd6408a7226e2a3c2f
CRs-Fixed: 2680360
Add driver command support to dump all the function call
mapping which is cached in global buffer.
Change-Id: I03b2162ccda171005e6fa8a7bb09cbf9c4819421
CRs-Fixed: 2677976
Based on multi-clients test experiment, when AUTO SA8155+HST
works as SAP connected more than 8 Ref STA clients, it requires
increase in TX descriptors to burst traffic to each Rx device,
or flow control happens to stop host tx queue frequently for
missing TX descriptors, can't get high throughput.
Change-Id: Ie2adbdd3bfece323d51d5e96fef6001c4e39c3f4
CRs-Fixed: 2703765
This reverts Change-Id: Iaf86c9da2a9946aac09867b5c46dcc79f1b5c37e.
That change fails build for GKI variant.
Change-Id: I6cd7322870023d245fe9d20250ceb0b5d738d214
CRs-Fixed: 2701642
Add support and use IS_ENABLED in code, if CONFIG_IPA3 config as
loadable kernel module.
Change-Id: Iaf86c9da2a9946aac09867b5c46dcc79f1b5c37e
CRs-Fixed: 2701642
Add the sysfs entry for set_he_bss_clr.
Previously these commands would be queried via iwpriv
--> iwpriv wlan0 set_he_bss_clr [value]
it is now changed to support via sysfs:
--> echo [value] > /sys/class/net/wlanxx/he_bss_color
Change-Id: I4700414469be018de9758277c4e095e64cabb376
CRs-Fixed: 2692916
For Voice and Music (V&M) products, extreme latency optimization is
needed while playing music and discovery, higher power consumption
in this mode could be accepted. With CONFIG_WLAN_LL_MODE enabled,
when latency_level is set to ultra low via cfg80211 vendor command,
update request pm qos type PM_QOS_CPU_DMA_LATENCY to level
DISABLE_KRAIT_IDLE_PS_VAL to speed up CPU efficiency and irq response.
Change-Id: Ifb5bc8169f1cd08500c4b4bc0dd65dd0b3667ab6
CRs-Fixed: 2685074
As part of this change I2e7caec268776a79d7166020c64af93fee2f8aec,
the feature flag was not properly defined and there were some compilation
issues. Hence, this change is fixing these issues. Also, add unit test
ini check in fw unit test command.
Change-Id: Ia8dfedec19d4d97c8c100321a0a012ee1a1b6a00
CRs-Fixed: 2695208
Add the sysfs entry for dumpStats and clearStats.
Previously these commands would be queried via iwpriv
--> iwpriv wlan0 dumpStats [stats_id]
--> iwpriv wlan0 clearStats [stats_id]
it is now changed to support via sysfs:
--> echo [stats_id] > /sys/class/net/wlanxx/dump_stats
--> cat /sys/class/net/wlanxx/dump_stats
--> echo [stats_id] > /sys/class/net/wlanxx/clear_stats
Change-Id: If8e4d997bc621df98732461802fdd9cea89bd1ce
CRs-Fixed: 2685995
Add the sysfs entry for dumpStats and clearStats.
Previously these commands would be queried via iwpriv
enable / disable --> iwpriv wlan0 dump_dp_trace [1/3]
show --> iwpriv wlan0 dump_dp_trace 0
clear --> iwpriv wlan0 dump_dp_trace 2
it is now changed to support via sysfs:
enable / disable --> echo [1/0] > /sys/kernel/wifi/dump_dp_trace
show --> echo 2 [count] > /sys/kernel/wifi/dump_dp_trace
cat /sys/kernel/wifi/dump_dp_trace
clear --> echo 1 > /sys/kernel/wifi/clear_dp_trace
Change-Id: I2e7caec268776a79d7166020c64af93fee2f8aec
CRs-Fixed: 2691705
Add a config option to set maximum number of clients allowed.
And set max clients allowed to 64 on SDXPRAIRIE platform.
Change-Id: I4f475abbf5fba8d01f4121e55a87324fdd2d5d70
CRs-Fixed: 2692639
As part of WEXT replacement, replace range_ext with a sysfs file.
This feature can be controlled using configuration flag
CONFIG_WLAN_SET_RANGE_EXT
file path: /sys/class/net/wlanxx/range_ext
where wlanxx is adapter name
example command: echo 1 > /sys/class/net/wlan1/range_ext
Change-Id: I389da429e1a0cd3a2ed1efede6cb958628eb7e6e
CRs-Fixed: 2689879
Add the sysfs entry for enablertscts.
Previously these commands would be queried via iwpriv
--> iwpriv wlan0 enablertscts [0/1/2]
it is now changed to support via sysfs:
--> echo [0/1/2] > /sys/class/net/wlanxx/rts_cts
Change-Id: I9df4e0c678cc9221b3cc95c4d2058a4516438bc3
CRs-Fixed: 2689897
Add the sysfs entry for enable_dcm and get_dcm.
Previously these commands would be queried via iwpriv
--> iwpriv wlan0 enable_dcm [0/1]
--> iwpriv wlan0 get_dcm
it is now changed to support via sysfs:
--> echo [0/1] > /sys/class/net/wlanxx/dcm
--> cat /sys/class/net/wlanxx/dcm
Change-Id: I6f7d2e93c362b4d3018d7f5698dd1bba01123600
CRs-Fixed: 2685960
As part of WEXT replacement, replace gtx_bw_mask with a sysfs file.
file path: /sys/class/net/wlanxx/gtx_bw_mask
wlanxx is adapter name
example: echo 1 > gtx_bw_mask
Change-Id: I40c0f611ca221c91c59d9a3f60927f841385c469
CRs-Fixed: 2686762
As part of WEXT replacement, replace txrx_fw_st_rst with a sysfs file.
file path: /sys/class/net/wlanxx/txrx_fw_st_rst
wlanxx is adapter name
example: echo 1 > txrx_fw_st_rst
Change-Id: I654ea8b66e7067f0e1d23ff053fa4b8d163d878c
CRs-Fixed: 2686665
As part of WEXT replacement, replace setwlandbg with a sysfs file.
file path: /sys/kernel/wifi/set_wlan_dbg
example: echo 1 1 1 > /sys/kernel/wifi/set_wlan_dbg
Change-Id: I886bcd0ed89460e20db1ea809fa48e3a279bb39b
CRs-Fixed: 2686081
As part of WEXT replacement, replace getStats with a sysfs file.
file path: /sys/class/net/wlanxx/get_stats
where wlanxx is adapter name
example: cat /sys/class/net/wlanxx/get_stats
Change-Id: I762f61304407876b61b6970688e3715612c60d35
CRs-Fixed: 2685602
As part of WEXT replacement, replace get_tx_stbc with a sysfs file.
file path: /sys/class/net/wlanxx/get_tx_stbc
where wlanxx is adapter name
example: cat /sys/class/net/wlanxx/get_tx_stbc
Change-Id: I3024a574c7aa35398bd4c8ee30f8235ef2fe3128
CRs-Fixed: 2682374
On Lahaina platform it is seen that WBM IDLE ring init is failing,
Write to WBM_IDLE link ring LSB write is failing.
Add temporary WAR to do back to back write of WBM IDLE link ring
LSB address config register.
Change-Id: Iccaf222038fb571ed518a90d7e7ac4e655ba5010
CRs-Fixed: 2690491
