Currently, we only set the KVM paravirt signature in case
of CONFIG_KVM_GUEST. However, it is possible to have it turned
off, while CONFIG_KVM_CLOCK is turned on. This is also a paravirt
case, and should be shown accordingly.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On emergency_restart, we may need to use an NMI to disable virtualization
on all CPUs. We do that using nmi_shootdown_cpus() if VMX is enabled.
Note: With this patch, we will run the NMI stuff only when the CPU where
emergency_restart() was called has VMX enabled. This should work on most
cases because KVM enables VMX on all CPUs, but we may miss the small
window where KVM is doing that. Also, I don't know if all code using
VMX out there always enable VMX on all CPUs like KVM does. We have two
other alternatives for that:
a) Have an API that all code that enables VMX on any CPU should use
to tell the kernel core that it is going to enable VMX on the CPUs.
b) Always call nmi_shootdown_cpus() if the CPU supports VMX. This is
a bit intrusive and more risky, as it would run nmi_shootdown_cpus()
on emergency_reboot() even on systems where virtualization is never
enabled.
Finding a proper point to hook the nmi_shootdown_cpus() call isn't
trivial, as the non-emergency machine_restart() (that doesn't need the
NMI tricks) uses machine_emergency_restart() directly.
The solution to make this work without adding a new function or argument
to machine_ops was setting a 'reboot_emergency' flag that tells if
native_machine_emergency_restart() needs to do the virt cleanup or not.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We need to disable virtualization extensions on all CPUs before booting
the kdump kernel, otherwise the kdump kernel booting will fail, and
rebooting after the kdump kernel did its task may also fail.
We do it using cpu_emergency_vmxoff() and cpu_emergency_svm_disable(),
that should always work, because those functions check if the CPUs
support SVM or VMX before doing their tasks.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
For KVM can reuse the type define, and need them to support shadow MTRR.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, sparseirq: clean up Kconfig entry
x86: turn CONFIG_SPARSE_IRQ off by default
sparseirq: fix numa_migrate_irq_desc dependency and comments
sparseirq: add kernel-doc notation for new member in irq_desc, -v2
locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
sparseirq, xen: make sure irq_desc is allocated for interrupts
sparseirq: fix !SMP building, #2
x86, sparseirq: move irq_desc according to smp_affinity, v7
proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
sparse irqs: add irqnr.h to the user headers list
sparse irqs: handle !GENIRQ platforms
sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
sparseirq: fix Alpha build failure
sparseirq: fix typo in !CONFIG_IO_APIC case
x86, MSI: pass irq_cfg and irq_desc
x86: MSI start irq numbering from nr_irqs_gsi
x86: use NR_IRQS_LEGACY
sparse irq_desc[] array: core kernel and x86 changes
genirq: record IRQ_LEVEL in irq_desc[]
irq.h: remove padding from irq_desc on 64bits
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimers: fix warning in kernel/hrtimer.c
x86: make sure we really have an hpet mapping before using it
x86: enable HPET on Fujitsu u9200
linux/timex.h: cleanup for userspace
posix-timers: simplify de_thread()->exit_itimers() path
posix-timers: check ->it_signal instead of ->it_pid to validate the timer
posix-timers: use "struct pid*" instead of "struct task_struct*"
nohz: suppress needless timer reprogramming
clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
nohz: no softirq pending warnings for offline cpus
hrtimer: removing all ur callback modes, fix
hrtimer: removing all ur callback modes, fix hotplug
hrtimer: removing all ur callback modes
x86: correct link to HPET timer specification
rtc-cmos: export second NVRAM bank
Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
stacktrace: provide save_stack_trace_tsk() weak alias
rcu: provide RCU options on non-preempt architectures too
printk: fix discarding message when recursion_bug
futex: clean up futex_(un)lock_pi fault handling
"Tree RCU": scalable classic RCU implementation
futex: rename field in futex_q to clarify single waiter semantics
x86/swiotlb: add default swiotlb_arch_range_needs_mapping
x86/swiotlb: add default phys<->bus conversion
x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
x86: add swiotlb allocation functions
swiotlb: consolidate swiotlb info message printing
swiotlb: support bouncing of HighMem pages
swiotlb: factor out copy to/from device
swiotlb: add arch hook to force mapping
swiotlb: allow architectures to override phys<->bus<->phys conversions
swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
rcu: fix rcutorture behavior during reboot
resources: skip sanity check of busy resources
swiotlb: move some definitions to header
swiotlb: allow architectures to override swiotlb pool allocation
...
Fix up trivial conflicts in
arch/x86/kernel/Makefile
arch/x86/mm/init_32.c
include/linux/hardirq.h
as per Ingo's suggestions.
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/xsave.c:162:5: warning: symbol 'restore_user_xstate' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/apic.c:270:5: warning: symbol 'x2apic_icr_read' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/bios_uv.c:28:18: warning: symbol 'uv_systab' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, reduce kernel size a bit, avoid sparse warnings
Fixes sparse warnings:
arch/x86/kernel/genx2apic_phys.c:164:6: warning: symbol 'x2apic_send_IPI_self' was not declared. Should it be static?
arch/x86/kernel/genx2apic_phys.c:169:6: warning: symbol 'init_x2apic_ldr' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/amd_iommu.c:1299:6: warning: symbol 'prealloc_protection_domains' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/amd_iommu_init.c:246:13: warning: symbol 'iommu_enable' was not declared. Should it be static?
arch/x86/kernel/amd_iommu_init.c:259:13: warning: symbol 'iommu_enable_event_logging' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)
Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/pci-gart_64.c:55:5: warning: symbol 'iommu_fullflush' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/io_apic.c:709:6: warning: symbol 'io_apic_sync' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix section mismatch warning
Commit b2bb855491 ("x86: Remove cpumask games
in x86/kernel/cpu/intel_cacheinfo.c") introduced get_cpu_leaves(), which
references __cpuinit cpuid4_cache_lookup().
Mark get_cpu_leaves() with a __cpuinit annotation.
Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
sched, trace: update trace_sched_wakeup()
tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Revert "x86: disable X86_PTRACE_BTS"
ring-buffer: prevent false positive warning
ring-buffer: fix dangling commit race
ftrace: enable format arguments checking
x86, bts: memory accounting
x86, bts: add fork and exit handling
ftrace: introduce tracing_reset_online_cpus() helper
tracing: fix warnings in kernel/trace/trace_sched_switch.c
tracing: fix warning in kernel/trace/trace.c
tracing/ring-buffer: remove unused ring_buffer size
trace: fix task state printout
ftrace: add not to regex on filtering functions
trace: better use of stack_trace_enabled for boot up code
trace: add a way to enable or disable the stack tracer
x86: entry_64 - introduce FTRACE_ frame macro v2
tracing/ftrace: add the printk-msg-only option
tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
x86, bts: correctly report invalid bts records
...
Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
Impact: extend functions with a (yet unused) parameter, update callsites
Some architectures need it - in preparation for highmem swiotlb.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix panic on null pointer with sparseirq
Some GCC versions seem to inline the weak global function,
when that function is empty.
Work it around, by making the functions return a (dummy) integer.
Signed-off-by: Yinghai <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/apic.c:103:5: warning: symbol 'disable_x2apic' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, avoid sparse warning
Include "../pci/pci.h" for port_cf9_safe
Fixes this sparse warning:
arch/x86/kernel/reboot.c:43:6: warning: symbol 'port_cf9_safe' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New API
Like cpu_coregroup_map, but returns a (const) pointer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Impact: New APIs
The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these
return a pointer to a struct cpumask. Part of removing cpumasks from
the stack.
Also makes __pcibus_to_node take a const pointer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
all for_each_irq_desc() usage point have !desc check.
then its check can move into for_each_irq_desc() macro.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
enable_mtrr_cleanup is static, and is never set to anything but 0 or 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
On 32 bits, we may suffer IRQ 13, or supposedly we might have a buggy
implementation which gives spurious trap 16. We did not check for
this on 64 bits, but there is no reason we can't make the code the
same in both cases. Furthermore, this is presumably rare, so do the
spurious check last, instead of first.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, avoid warning on X86_64
Fixes this warning on X86_64:
CC arch/x86/kernel/traps.o
arch/x86/kernel/traps.c:695:5: warning: "CONFIG_X86_32" is not defined
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a crash/hard-reboot on certain configs while enabling cpu runtime
On some archs, the boot of a secondary cpu can have an early fragile state.
On x86-64, the pda is not initialized on the first stage of a cpu boot but
it is needed to get the cpu number and the current task pointer. This data
is needed during tracing. As they were dereferenced at this stage, we got a
crash while tracing a cpu being enabled at runtime.
Some other archs like ia64 can have such kind of issue too.
Changes on v2:
We dropped the previous solution of a per-arch called function to guess the
current state of a cpu. That could slow down the tracing.
This patch removes the -pg flag on arch/x86/kernel/cpu/common.c where
the low level cpu boot functions exist, on start_secondary() and a helper
function used at this stage.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
lguest can be built as a module and makes use of this new symbol:
ERROR: "vector_used_by_percpu_irq" [drivers/lguest/lg.ko] undefined!
export it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
These commits:
commit 95d313cf1c
Author: Mike Travis <travis@sgi.com>
Date: Tue Dec 16 17:33:54 2008 -0800
x86: Add cpu_mask_to_apicid_and
and
commit 6eeb7c5a99
Author: Mike Travis <travis@sgi.com>
Date: Tue Dec 16 17:33:55 2008 -0800
x86: update add-cpu_mask_to_apicid_and to use struct cpumask*
broke interrupt delivery on x2apic platforms. As x2apic cluster mode uses
logical delivery mode, we need to use logical apicid instead of physical apicid
in x2apic_cpu_mask_to_apicid_and()
Impact: fixes the broken interrupt delivery issue on generic x2apic platforms.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix lguest, clean up
32-bit lguest used used_vectors to record vectors, but that model of
allocating vectors changed and got broken, after we changed vector
allocation to a per_cpu array.
Try enable that for 64bit, and the array is used for all vectors that
are not managed by vector_irq per_cpu array.
Also kill system_vectors[], that is now a duplication of the
used_vectors bitmap.
[ merged in cpus4096 due to io_apic.c cpumask changes. ]
[ -v2, fix build failure ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When ACPI is asked to find an MADT (APIC table)
and fails, then ACPI expects to run in PIC mode.
However, if an MP Table is was found, IRQs will be
registered as if an IOAPIC is being used, even
though ACPI is configuring interrupt links links for PIC mode.
In this scenario, disable MPS so that IRQs
are registered in PIC mode, consistent with ACPI.
http://bugzilla.kernel.org/show_bug.cgi?id=12257
Signed-off-by: Len Brown <len.brown@intel.com>
In the case of multiple FPU errors, prioritize the error codes,
instead of returning __SI_FAULT, which ends up pushing a 0 as the
error code to userspace, a POSIX violation.
For i386, we will simply return if there are no errors at all; for
x86-64 this is probably a "can't happen" (and the code should be
unified), but for this patch, return __SI_FAULT|SI_KERNEL if this ever
happens.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: fix deadlock
This is in response to the following bug report:
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12100
Subject : resume (S2R) broken by Intel microcode module, on A110L
Submitter : Andreas Mohr <andi@lisas.de>
Date : 2008-11-25 08:48 (19 days old)
Handled-By : Dmitry Adamushko <dmitry.adamushko@gmail.com>
[ The deadlock scenario has been discovered by Andreas Mohr ]
I think I might have a logical explanation why the system:
(http://bugzilla.kernel.org/show_bug.cgi?id=12100)
might hang upon resuming, OTOH it should have likely hanged each and every time.
(1) possible deadlock in microcode_resume_cpu() if either 'if' section is
taken;
(2) now, I don't see it in spec. and can't experimentally verify it (newer
ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd
think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should
be back to its original one (we need to reload ucode anyway so it doesn't seem
logical if a cpu doesn't drop the version)... if so, the comparison with
memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of
the aforementioned 'if' sections might have been triggered - leading to a
deadlock.
Obviously, in my tests I simulated loading/resuming with the ucode of the same
version (just to see that the file is loaded/re-loaded upon resuming) so this
issue has never popped up.
I'd appreciate if someone with an appropriate system might give a try to the
2nd patch (titled "fix a comparison && deadlock...").
In any case, the deadlock situation is a must-have fix.
Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Tested-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: move the BTS buffer accounting to the mlock bucket
Add alloc_locked_buffer() and free_locked_buffer() functions to mm/mlock.c
to kalloc a buffer and account the locked memory to current.
Account the memory for the BTS buffer to the tracer.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: introduce new ptrace facility
Add arch_ptrace_untrace() function that is called when the tracer
detaches (either voluntarily or when the tracing task dies);
ptrace_disable() is only called on a voluntary detach.
Add ptrace_fork() and arch_ptrace_fork(). They are called when a
traced task is forked.
Clear DS and BTS related fields on fork.
Release DS resources and reclaim memory in ptrace_untrace(). This
releases resources already when the tracing task dies. We used to do
that when the traced task dies.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, avoid sparse warnings, reduce kernel size a bit
Fixes these sparse warnings:
arch/x86/kernel/cpu/common.c:869:6: warning: symbol 'boot_cpu_stack' was not declared. Should it be static?
arch/x86/kernel/cpu/common.c:910:6: warning: symbol 'boot_exception_stacks' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reduce kconfig variable scope and clean up
Bartlomiej pointed out that the config dependencies and comments are not right.
update it depend to NUMA, and fix some comments
Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On some machines it may be necessary to disable the saving/restoring
of the ACPI NVS memory region during hibernation/resume. For this
purpose, introduce new ACPI kernel command line option
acpi_sleep=s4_nonvs.
Based on a patch by Zhang Rui.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce new initcall for marking the ACPI NVS memory at startup, so
that it can be saved/restored during hibernation/resume.
Based on a patch by Zhang Rui.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
this warning:
arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
arch/x86/kernel/io_apic.c:3373: warning: ‘cfg’ may be used uninitialized in this function
triggers because the variable was truly uninitialized. We'd crash on
entering this code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix wrong cache sharing detection on platforms supporting > 8 bit apicid's
In the presence of extended topology eumeration leaf 0xb provided
by cpuid, 32bit extended initial_apicid in cpuinfo_x86 struct will be
updated by detect_extended_topology(). At this instance, we should also
reinit the apicid (which could also potentially be extended to 32bit).
With out this there will potentially be duplicate apicid's populated in the
per cpu's cpuinfo_x86 struct, resulting in wrong cache sharing topology etc
detected by init_intel_cacheinfo().
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
this warning:
arch/x86/kernel/microcode_amd.c: In function ‘apply_microcode_amd’:
arch/x86/kernel/microcode_amd.c:163: warning: cast from pointer to integer of different size
arch/x86/kernel/microcode_amd.c:163: warning: cast from pointer to integer of different size
triggers because we want to pass the address to the microcode MSR,
which is 64-bit even on 32-bit. Cast it explicitly to express this.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use rt_sigframe_ia32 instead of rt_sigframe32.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup, avoid sparse warning
Included asm/idle.h for c1e_remove_cpu() declaration. Fixes this
sparse warning:
CHECK arch/x86/kernel/process.c
arch/x86/kernel/process.c:284:6: warning: symbol 'c1e_remove_cpu' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove annoying bootup printk
It's perfectly normal for no AMD GART to be present, e.g., if you have
Intel CPUs. None of the other iommu_init() functions makes noise when
it finds nothing.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new boot parameter
Use possible_cpus=NUM kernel parameter to extend the number of possible
cpus.
The ability to HOTPLUG ON cpus that are "possible" but not "present" is
dealt with in a later patch.
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: fix potential APIC crash
In determining the destination apicid, there are usually three cpumasks
that are considered: the incoming cpumask arg, cfg->domain and the
cpu_online_mask. Since we are just introducing the cpu_mask_to_apicid_and
function, make sure it includes the cpu_online_mask in it's evaluation.
[Added with this patch.]
There are two io_apic.c functions that did not previously use the
cpu_online_mask: setup_IO_APIC_irq and msi_compose_msg. Both of these
simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but
one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask,
so the behavior is identical for all cases.
[*: NUMAQ bug?]
Note that alloc_cpumask_var is only used for the 32-bit cases where
it's highly likely that the cpumask set size will be small and therefore
CPUMASK_OFFSTACK=n. But if that's not the case, failing the allocate
will cause the same return value as the default.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This done for conflict prevention: we merge it into the cpus4096 tree
because upcoming cpumask changes will touch apic.c that would collide
with x86/apic otherwise.
Impact: cleanup, move header file
Move arch/x86/kernel/sigframe.h to arch/x86/include/asm/sigframe.h.
It will be used in arch/x86/ia32/ia32_signal.c.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, prepare to move sigframe.h
On 32-bit, rename struct sigrame to struct sigframe_ia32, struct rt_sigframe
to struct rt_sigframe_ia32 and several structures.
And add helper macros to access the above data in arch/x86/kernel/signal.c.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Move declarations of ia32_setup_rt_frame() and ia32_setup_frame() into
arch/x86/kernel/signal.c.
This is for future use of sigframe.h.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen will override these later on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen will override these later on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
swiotlb on 32 bit will be used by Xen domain 0 support.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add x86-specific swiotlb allocation functions. These are purely
default for the moment.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Remove cpumask_t's from stack.
Simple transition to work_on_cpu(), rather than cpumask games.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: jacob.shin@amd.com
Impact: remove cpumask_t from stack.
We should not try to save and restore cpus_allowed on current.
We can't use work_on_cpu() here, since it's in the hotplug cpu path
(if anyone else tries to get the hotplug lock from a workqueue we
could deadlock against them).
Fortunately, we can just use smp_call_function_single() since the
function can run from an interrupt.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Impact: use new API
Use the accessors rather than frobbing bits directly. Most of this is
in arch code I haven't even compiled, but is straightforward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: cleanup, futureproof
In fact, all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids. So use that instead of NR_CPUS in various
places.
This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
This patch simply changes cpumask_t to struct cpumask and similar
trivial modernizations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: cleanup, remove on-stack cpumask.
The "map" arg is always cpu_online_mask. Importantly, set_affinity
always ands the argument with cpu_online_mask anyway, so we don't need
to do it in fixup_irqs(), avoiding a temporary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: cleanup, consolidate patches, use new API
Consolidate the following into a single patch to adapt to new
sparseirq code in arch/x86/kernel/io_apic.c, add allocation of
cpumask_var_t's in domain and old_domain, and reduce further
merge conflicts. Only one file (arch/x86/kernel/io_apic.c) is
changed in all of these patches.
0006-x86-io_apic-change-irq_cfg-domain-old_domain-to.patch
0007-x86-io_apic-set_desc_affinity.patch
0008-x86-io_apic-send_cleanup_vector.patch
0009-x86-io_apic-eliminate-remaining-cpumask_ts-from-st.patch
0021-x86-final-cleanups-in-io_apic-to-use-new-cpumask-AP.patch
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: use updated APIs
Various API updates for x86:add-cpu_mask_to_apicid_and
(Note: separate because previous patch has been "backported" to 2.6.27.)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Impact: new API
Add a helper function that takes two cpumask's, and's them and then
returns the apicid of the result. This removes a need in io_apic.c
that uses a temporary cpumask to hold (mask & cfg->domain).
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup, better debugging
This has proven useful in debugging, *before* we try to use
for_each_possible_cpu(). It also now shows nr_cpumask_bits.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup, change parameter passing
* Change genapic interfaces to accept cpumask_t pointers where possible.
* Modify external callers to use cpumask_t pointers in function calls.
* Create new send_IPI_mask_allbutself which is the same as the
send_IPI_mask functions but removes smp_processor_id() from list.
This removes another common need for a temporary cpumask_t variable.
* Functions that used a temp cpumask_t variable for:
cpumask_t allbutme = cpu_online_map;
cpu_clear(smp_processor_id(), allbutme);
if (!cpus_empty(allbutme))
...
become:
if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
...
* Other minor code optimizations (like using cpus_clear instead of
CPU_MASK_NONE, etc.)
Applies to linux-2.6.tip/master.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to
save a number of lines on source level.
Also fix a comment in ftrace.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes
if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:
- make irq_desc to go with affinity aka irq_desc moving etc
- call move_irq_desc in irq_complete_move()
- legacy irq_desc is not moved, because they are allocated via static array
for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar wrote:
> allyes64 build failure:
>
> arch/x86/kernel/io_apic.c: In function ‘set_ir_ioapic_affinity_irq_desc’:
> arch/x86/kernel/io_apic.c:2295: error: incompatible type for argument 2 of
> ‘migrate_ioapic_irq_desc’
> arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
> arch/x86/kernel/io_apic.c:3205: error: incompatible type for argument 2 of
> ‘set_extra_move_desc’
> make[1]: *** wait: No child processes. Stop.
Here's a small patch to correct the build error with the post-merge tree.
Built and boot-tested. I'll will reset the follow on patches in my brand
new git tree to accommodate this change.
Fix two references in io_apic.c that were incorrect.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Call signal_fault() in error route of sys_sigreturn().
Change log level to KERN_EMERG if current is init.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crash
xpc needs to pass the physical address, not virtual.
Testing uncovered this problem. The virtual address happens to work
most of the time due to the way bios was masking off the node bits.
Passing the physical address makes it work all of the time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix disabled MCE after resume
Don't prevent multiple initialization of MCEs.
Back from early prehistory mcheck_init() has a reentry check. Presumably
that was needed in very old kernels to prevent it entering twice.
But as Andreas points out this prevents CPU hotplug (and therefore resume)
to correctly reinitialize MCEs when a AP boots again after being
offlined.
Just drop the check.
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix UV boot crash
This fixes a UV bug related to generating global memory addresses
on partitioned systems. Partition systems do not have physical memory
at address 0. Instead, a chunk of high memory is remapped by the chipset
so that it appears to be at address 0. This remapping is INVISIBLE to most
of the OS. The only OS functions that need to be aware of the remaping are
functions that directly interface to the chipset. The GRU is one example.
Also, delete a couple of unused macros related to global memory addresses.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove dead debug code
I ran across some old debugging code in vmi paravirt-ops code that was
already dead, but still potentially useful. After reviewing recent
changes to the way kernel page tables are allocated and initialized, and
the lack of bugs caught by this debugging code, I've concluded it is now
totally useless to have around, and it's already been #if 0'd for quite
some time.
There's no rush to get this in mainline, but it's also totally harmless,
so I'll let the x86 maintainers decide where it should be tucked. I've
been out of the mainstream dev loop for a couple months, so apologies if
I haven't got any protocol changes in order.
Remove mummified remains found in vmi_32.c
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prepare the hpet code for Xen dom0 booting
When booting in Xen dom0, the hpet isn't really accessible, so make
sure the mapping is non-NULL before use.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove dead code
The last usage was removed by the patch set culminating in
| commit e3c449f526
| Author: Joerg Roedel <joerg.roedel@amd.com>
| Date: Wed Oct 15 22:02:11 2008 -0700
|
| x86, AMD IOMMU: convert driver to generic iommu_num_pages function
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reward non-stop TSCs with good TSC-based clocksources, etc.
Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means
that the TSC is invariant with C/P/T states and always runs at constant
frequency.
With Intel CPUs, we have 3 classes
* CPUs where TSC runs at constant rate and does not stop n C-states
* CPUs where TSC runs at constant rate, but will stop in deep C-states
* CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep
C-states.
To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a
second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at
constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates
that TSC does not stop in deep C-states.
CPUID_0x8000000_Bit8 indicates both these feature bit can be set.
We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel
CPUs, based on model checks. We can use TSC on such CPUs for time, as long as
those CPUs do not support/enter deep C-states.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: auto-enable HPET on Fujitsu u9200
HPET timer is listed in the ACPI table, but needs a quirk entry in order to
work. Unfortunately, the quirk code runs after first HPET hpet_enable() which
has already determined that the timer doesn't work (reads 0xFFFFFFFF). This
patch allows hpet_enable() to be called again after running the quirk code.
Signed-off-by: Janne Kulmala <janne.t.kulmala@tut.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead/incorrect code
Currently there is no chipset specific ucode. The checks are incorrect
anyway (e.g. pci device IDs are 16 bit and not 8 bit).
Thus I remove the stuff for the time being and will reintroduce it if
it's foreseeable that it is really needed.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix build warning
CC arch/x86/kernel/microcode_amd.o
arch/x86/kernel/microcode_amd.c: In function ‘request_microcode_fw’:
arch/x86/kernel/microcode_amd.c:393: warning: passing argument 2 of ‘generic_load_microcode’ discards qualifiers from pointer target type
(Respect "const" qualifier of firmware->data.)
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix bug resulting in non-loaded AMD microcode
mc_header->processor_rev_id is a 2 byte value. Similar is true for
equiv_cpu in an equiv_cpu_entry -- only 2 bytes are of interest.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change the reporting of empty BTS records
Correctly report a cleared BTS record as invalid. Used to be reported
as branch from 0 to 0.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Optimistically allocate a DS context. It is extremely unlikely that
one already existed. This simplifies the code a lot.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
VMI initialiation can relocate the fixmap, causing early_ioremap to
malfunction if it is initialized before the relocation. To fix this,
VMI activation is split into two phases; the detection, which must
happen before setting up ioremap, and the activation, which must happen
after parsing early boot parameters.
This fixes a crash on boot when VMI is enabled under VMware.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: change calling convention of existing clock_event APIs
struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.
Another single-patch change. For safety, we BUG_ON() in
clockevents_register_device() if it's not set.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Impact: change existing irq_chip API
Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.
Fortunately, not widely used code, but hits a few architectures.
Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly. Ingo, does this break anything?
(Folded in fix from KOSAKI Motohiro)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Impact: change calling convention of existing cpumask APIs
Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.
These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
Impact: cleanup
Each SMP arch defines these themselves. Move them to a central
location.
Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
CONFIG_INIT_ALL_POSSIBLE for this rather than break them.
2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
Those archs simply have phys_cpu_present_map replaced everywhere.
3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
so I just manipulate them both in sync.
4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
declarations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
Impact: remove obsolete code
The later versions of SimNow! actually all have serial console
emulation, so the direct interface isn't needed anymore. So remove
the undocumented simnow earlyprintk console.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: remove deprecated export
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We merge the irq/sparseirq, x86/quirks and x86/reboot trees into the
cpus4096 tree because the io-apic changes in the sparseirq change
conflict with the cpumask changes in the cpumask tree, and we
want to resolve those.
Impact: move most important x86 irq entry-points to a separate subsection
Annotate do_IRQ and smp_apic_timer_interrupt to put them into the .irqentry.text
subsection. These function will so be recognized as hardirq entrypoints for the
function-graph-tracer. We could also annotate other irq entries but the others
are far less important but they can be added on request.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: let the function-graph-tracer be aware of the irq entrypoints
Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.
Also, make this section recordable for dynamic tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
arch/x86/kernel/ds.c: In function 'ds_request':
arch/x86/kernel/ds.c:236: sorry, unimplemented: inlining failed in call to 'ds_get_context': recursive inlining
but the recursion here is scary ...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Move the BTS bits from ptrace.c into ds.c.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make the ds code more debuggable
Turn BUG_ON's into WARN_ON_ONCE.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
these warnings:
arch/x86/kernel/paravirt-spinlocks.c: In function ‘default_spin_lock_flags’:
arch/x86/kernel/paravirt-spinlocks.c:12: warning: passing argument 1 of ‘__raw_spin_lock’ from incompatible pointer type
arch/x86/kernel/paravirt-spinlocks.c: At top level:
arch/x86/kernel/paravirt-spinlocks.c:11: warning: ‘default_spin_lock_flags’ defined but not used
showed that the prototype of default_spin_lock_flags() was confused about
what type spinlocks have.
the proper type on UP is raw_spinlock_t.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup on 32-bit
Peter pointed this parameter can be changed.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Provide a way to pause the function graph tracer
As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: trace more functions
When the function graph tracer is configured, three more files are not
traced to prevent only four functions to be traced. And this impacts the
normal function tracer too.
arch/x86/kernel/process_64/32.c:
I had crashes when I let this file traced. After some debugging, I saw
that the "current" task point was changed inside__swtich_to(), ie:
"write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store
the original return address of the function inside current, we had
crashes. Only __switch_to() has to be excluded from tracing.
kernel/module.c and kernel/extable.c:
Because of a function used internally by the function graph tracer:
__kernel_text_address()
To let the other functions inside these files to be traced, this patch
introduces the __notrace_funcgraph function prefix which is __notrace if
function graph tracer is configured and nothing if not.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
reorder exit path in __get_smp_config().
also move two print outs to acpi_process_madt
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplify code
Pass irq_desc and cfg around, instead of raw IRQ numbers - this way
we dont have to look it up again and again.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: sanitize MSI irq number ordering from top-down to bottom-up
Increase new MSI IRQs starting from nr_irqs_gsi (which is somewhere below
256), instead of decreasing from NR_IRQS. (The latter method can result
in confusingly high IRQ numbers - if NR_CPUS is set to a high value and
NR_IRQS scales up to a high value.)
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature
Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.
To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.
When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).
This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix trampoline sizing bug, save space
While debugging a suspend-to-RAM related issue it occured to me that
if the trampoline code had grown past 4 KB, we would have been
allocating too little memory for it, since the 4 KB size of the
trampoline is hardcoded into arch/x86/kernel/e820.c . Change that
by making the kernel compute the trampoline size and allocate as much
memory as necessary.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add Celeron Core support to p4-clockmod.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Dave Jones <davej@redhat.com>
Add additional fsb values to pentium_core_get_frequency, from latest edition
(September 2008) of Intel 64 and IA-32 Architectures Software Develper's Manual,
Volume 3B: System Programming Guide, Part 2. Values added are to detect 800,
1067 and 1333 FSB types.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Dave Jones <davej@redhat.com>
p4-clockmod has a long history of abuse. It pretends to be a CPU
frequency scaling driver, even though it doesn't actually change
the CPU frequency, but instead just modulates the frequency with
wait-states.
The biggest misconception is that when running at the lower 'frequency'
p4-clockmod is saving power. This isn't the case, as workloads running
slower take longer to complete, preventing the CPU from entering deep C states.
However p4-clockmod does have a purpose. It can prevent overheating.
Having it hooked up to the cpufreq interfaces is the wrong way to achieve
cooling however. It should instead be hooked up to ACPI.
This diff introduces a means for a cpufreq driver to register with the
cpufreq core, but not present a sysfs interface.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
On those CPUs which are SpeedStep (EST) capable, we do not care at all if
p4-clockmod does not work, since a technically superior CPU frequency
management technology is to be used.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
Impact: cleanup
1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
2) The loop can simply skip over offline cpus, rather than creating a tmp mask.
3) set_mask is set to either a single cpu or all online cpus in a policy.
Since it's just used for set_cpus_allowed(), any offline cpus in a policy
don't matter, so we can just use cpumask_of_cpu() or the policy->cpus.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Just come across this when booting on an old hw..
Looks somewhat ugly, that single missing space ;)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot crash with numcpus=0 on certain systems
Fix early exception in __get_smp_config with nosmp.
Bail out early when there is no MP table.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The access to the iommu->need_sync member needs to be protected by the
iommu->lock. Otherwise this is a possible race condition. Fix it with
this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In some rare cases a request can arrive an IOMMU with its originial
requestor id even it is aliased. Handle this by setting the device table
entry to the same protection domain for the original and the aliased
requestor id.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Impact: remove stale IOTLB entries
In the non-default nofullflush case the GART is only flushed when
next_bit wraps around. But it can happen that an unmap operation unmaps
memory which is behind the current next_bit location. If these addresses
are reused it may result in stale GART IO/TLB entries. Fix this by
setting the GART next_bit always behind an unmapped location.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Import: robustness checks
Add more checks in the function graph code to detect errors and
perhaps print out better information if a bug happens.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature, let entry function decide to trace or not
This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: better dumpstack output
I noticed in my crash dumps and even in the stack tracer that a
lot of functions listed in the stack trace are simply
return_to_handler which is ftrace graphs way to insert its own
call into the return of a function.
But we lose out where the actually function was called from.
This patch adds in hooks to the dumpstack mechanism that detects
this and finds the real function to print. Both are printed to
let the user know that a hook is still in place.
This does give a funny side effect in the stack tracer output:
Depth Size Location (80 entries)
----- ---- --------
0) 4144 48 save_stack_trace+0x2f/0x4d
1) 4096 128 ftrace_call+0x5/0x2b
2) 3968 16 mempool_alloc_slab+0x16/0x18
3) 3952 384 return_to_handler+0x0/0x73
4) 3568 -240 stack_trace_call+0x11d/0x209
5) 3808 144 return_to_handler+0x0/0x73
6) 3664 -128 mempool_alloc+0x4d/0xfe
7) 3792 128 return_to_handler+0x0/0x73
8) 3664 -32 scsi_sg_alloc+0x48/0x4a [scsi_mod]
As you can see, the real functions are now negative. This is due
to them not being found inside the stack.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new ftrace_graph_stop function
While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.
Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.
This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: consistency change for function graph
This patch makes function graph record the mcount caller address
the same way the function tracer does.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
There exists macros for x86 asm to handle x86_64 and i386.
This patch updates function graph asm to use them.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge x86/dumpstack into tracing/ftrace because upcoming ftrace changes
depend on cleanups already in x86/dumpstack.
Also merge to latest upstream -rc.
Impact: remove stale IOTLB entries
In the non-default nofullflush case the GART is only flushed when
next_bit wraps around. But it can happen that an unmap operation unmaps
memory which is behind the current next_bit location. If these addresses
are reused it may result in stale GART IO/TLB entries. Fix this by
setting the GART next_bit always behind an unmapped location.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove CONFIG_APM_REAL_MODE_POWER_OFF like CONFIG_APM_POWER_OFF which
has been done for linux-2.2.14pre8 (http://lkml.org/lkml/1999/11/23/3).
Re-introducing CONFIG_APM_POWER_OFF got nack-ed. Stephen didn't bother
to remove CONFIG_APM_REAL_MODE_POWER_OFF, let's get rid of it now.
Reference: http://lkml.org/lkml/2008/5/7/97
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend and enable the function graph tracer to 64-bit x86
This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.
This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.
That would be perhaps useful to implement a notrace version of these
function for other archs ports.
Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).
So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).
A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
irq.h: fix missing/extra kernel-doc
genirq: __irq_set_trigger: change pr_warning to pr_debug
irq: fix typo
x86: apic honour irq affinity which was set in early boot
genirq: fix the affinity setting in setup_irq
genirq: keep affinities set from userspace across free/request_irq()
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: always define DECLARE_PCI_UNMAP* macros
x86: fixup config space size of CPU functions for AMD family 11h
x86, bts: fix wrmsr and spinlock over kmalloc
x86, pebs: fix PEBS record size configuration
x86, bts: turn macro into static inline function
x86, bts: exclude ds.c from build when disabled
arch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul
x86: use limited register constraint for setnz
xen: pin correct PGD on suspend
x86: revert irq number limitation
x86: fixing __cpuinit/__init tangle, xsave_cntxt_init()
x86: fix __cpuinit/__init tangle in init_thread_xstate()
oprofile: fix an overflow in ppro code
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value
[CPUFREQ] Documentation: Add Blackfin to list of supported processors
Impact: update comment
Clarify that too small aperture is valid reason for this code.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
If we take a closer look at the rff_trace/rff_action ret_from_fork code,
we have to realize that it does all the wrong things: for example it
checks the TIF flag - while later on jumping back to the ret-from-syscall
path - duplicating the check needlessly.
But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because
we clear that flag for every freshly forked task. So the whole "tracing"
code here, for which there is a out of line jump optimization that makes
it even harder to read, is in reality completely dead code ...
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
We merge this branch because x86/debug touches code that we started
cleaning up in x86/irq. The two branches started out independent,
but as unexpected amount of activity went into x86/irq, they became
dependent. Resolve that by this cross-merge.
