ipa_is_fw_wdi_activated is invoked in the context of default 100ms
bus bandwidth calculation timer. Any logs will lead to excessive
messages and fix is to ratelimit these possible log messages.
Change-Id: I6e408187759bb6b6a5c511f2f88c2b14f4c889ab
CRs-Fixed: 2279024
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Enable the converged configuration component in the Kbuild. Also, hook
into the cfg parse and release APIs.
Change-Id: Id0df669a34463e9f51bd5cc5bf2939fb1ac6228d
CRs-Fixed: 2258233
There will be excessive logs in exception path when running SAP embedded
traffic since these logs are per packet.
Fix is to ratelimit all logs in IPA exception path to avoid excessive
logs.
Change-Id: Ia96a60f4de145740d7099b432c92e7b5785047d2
CRs-Fixed: 2272014
User can override the Listen Interval value set during association
by using wifi config set vendor command. Since there is no limit
check in host, a very high value causes an assert in the Firmware.
Add an upper limit check on the user Listen Interval value.
Change-Id: I8128ccbb875adf57c95a15d0391fb442d3dbbbc3
CRs-Fixed: 2256334
WLAN logs are excessively filled with
IPA logs when IPA performance level
is set.
Remove unnecessary logging in
hdd_ipa_set_perf_level().
Change-Id: I07563c1a6e98981e2b074bce7a969c9cbd94ec24
CRs-Fixed: 2268632
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: Icfcc28fb592ee99704d8fb23bc3cb45b6e4c9f53
CRs-Fixed: 2266718
The change id I50c357ca0f8ddfcc1a51ad4ed040961daf052459
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I33d83b5777ea259e29175e632a36e5fec3be24bc
CRs-Fixed: 2262351
Currently while going to suspend, dtim parameters are not
correctly getting configured. Some other parameters to config
like the inactivity timeout are completely skipped as well.
Cleanly port the setting of dtim and other parameters during
suspend and resume.
Change-Id: Ic41a8ace3f5650e53f2dcaa416bfe241b87aa88d
CRs-Fixed: 2248160
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the pmo component.
Change-Id: Ia23e1d0eed5a88b0cb1caf4feebd535d36ca2690
CRs-Fixed: 2261705
In case of rmmod if stop bss fails SAP IPA interface is not
deleted. So again at next driver load IPA will be holding the
stale IPA header and new IPA header will not be added at IPA
interface creation. In this change clean IPA interface when SAP
stop bss fails.
Change-Id: I3a1bf891752308ba1a29d6768f24880d8514d5bf
CRs-Fixed: 2224307
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
Some times HTT response for suspend IPA pipes from FW host arrives
after vdev has been cleaned up at FW. After receiving FW HTT IPA
pipe suspend response HOST processes pending events. For event AP
DISCONNECT HOST sends IPA offload disable command to FW with vdev
id that has been deleted at FW. As a result FW asserts.
In this change before processing IPA WLAN pending events validate the
session. If session exists then only process the events.
Change-Id: I464a91c3a85e6002297d9ade2fbd45b45a2a4d51
CRs-Fixed: 2261111
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
There are several logs in PMO that log debugging related information
at the INFO level. Reduce the logging level of these debug logs to
avoid spamming the console.
Change-Id: Ib1bb9279d5d8104104b58bd2c83869f72c0bde4a
CRs-Fixed: 2260190
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
With IPA WDI unified API, IPA PM is used instad of IPA RM
for power/resource management. When checking if IPA clk
scaling is enabled or not, HDD_IPA_RM_ENABLE_MASK is thus
not applicable for WDI unified API.
Change-Id: Ie18c2ba6168a06a3bf03f6a5754ffef98113ce30
CRs-Fixed: 2256015
With IPA WDI unified API, IPA PM is initialized after WLAN IPA pipes
are connected. Initializing IPA perf profile will fail if IPA pipes
are not yet connected.
Fix is to
1. Initialize perf perofile only after IPA pipes are connected
successfully.
2. If clk scaling is disabled, initialize perf level to maximum.
3. Allow driver to proceed if perf profile initialization fails.
Change-Id: I3a63e0f1decec10440467da62cb6ccf740eda318
CRs-Fixed: 2258682
Currently while sending wmi command when target is suspend, it will
check whether command is WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID/
WMI_PDEV_RESUME_CMDID, but D0WOW command is an exception, to keep align
with legacy code so don't set wmi_handle->is_target_suspended if it is
D0WOW enable command.
Move out logic of checking D0WOW status from PMO tgt to core layer.
Change-Id: I164f24ea733e54e5e0dbdb77344917df5d039e53
CRs-Fixed: 2254047
There are several logs along the suspend/resume code paths that log
debugging related information at the INFO level. Reduce the logging
level of these debug logs to avoid spamming the console.
Change-Id: I0e81901e4a053038392c1012600ae125a1ad27a3
CRs-Fixed: 2258093
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
In the case of invalid iface_ctx, the stats reset operation is not
needed, so removed it.
Change-Id: I48b4b42717451e1ccbfc9753147e65d35ff78df4
CRs-fixed: 2254683
When running embedded tput between client and SAP, there'll be
excessive logs per packet. Fix is to remove the per packet
debug message.
Change-Id: I846f4fd5e54cc8945b3159c56e04418feea0183f
CRs-Fixed: 2253186
Fix a few things in one shot.
- clean up some code to avoid potential NULL pointer dereference.
- add a helper function - wlan_ipa_free_tx_desc_list() to
avoid duplication.
- rearrage wlan_ipa_teardown_sys_pipe() to allow others' reference
Change-Id: I9d6391a7f20ae427bf59f07958bd13f349e61d83
CRs-Fixed: 2233867
In function wlan_ipa_uc_loaded_handler,the qdf_dev is as return of
wlan_psoc_get_qdf_dev(),which maybe NULL,then NULL reference could
occur later.
Change-Id: I3c6d5af35934deef643cb600b1966c22769c71ed
CRs-Fixed: 2250977
When ipa_check_hw_present() returns false, g_ipa_config
is left as NULL pointer. ipa_config_is_enabled() and
ipa_config_is_uc_enabled() will lead to NULL pointer
dereference.
Fix is to check against g_ipa_config NULL pointer
in ipa_config_is_enabled() and ipa_config_is_uc_enabled().
Change-Id: I95da7aede7d72db8591102eea7504cad59686105
CRs-Fixed: 2246224
There are two types of WLAN IPA exceptions, where WLAN driver is
involved for packet processing.
One is for RX exceptions, such as ICMP or Intra-BSS packets.
The other one is for WDI 1.0 MCC TX SW path, where packet queueing
is happening in WLAN driver.
In both cases, skb is allocated in IPA driver. If NBUF_MEMORY_DEBUG
is defined and qdf_net_buf_debug_acquire_skb() is not invoked for
the skb, qdf_nbuf_free() will trigger ASSERT to report unallocated
buffer.
For early processing of RX exceptions, dev_kfree_skb_any() needs to
be called instead of qdf_nbuf_free() otherwise above ASSERT will be
triggered.
For MCC TX SW path, ipa_free_skb() should be called to free skb to
IPA driver.
Change-Id: I039cb20673ce3aa98056529f7609801f76c4c16a
CRs-Fixed: 2247339
qdf_wait_for_event_completion() needs a timeout value in milliseconds.
msecs_to_jiffies() is not needed to convert timeout value into jiffies.
Change-Id: I95315f937d651fd200f58d89f44eb167c6f29cc8
CRs-Fixed: 2250143
IPA driver adds unified WDI API for ipa_wdi_create_smmu_mapping
and ipa_wdi_release_smmu_mapping. WLAN driver needs to adopt the
change accordingly.
Change-Id: I997aae3651831d0ecf576369fdb428c0f59be77b
CRs-Fixed: 2230075
Previously change "qcacld-3.0: Use enum QDF_OPMODE", Change-Id
Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f, replaced all instances of
tQDF_ADAPTER_MODE to QDF_OPMODE in the qcacld-3.0 project. However
since tQDF_ADAPTER_MODE was originally defined in a common project,
and not all references to it could be immediately removed, a legacy
definition was left with the expectation that it would be removed when
all references to it had been updated. Unfortunately new instances of
using tQDF_ADAPTER_MODE have been subsequently added to the project,
so replace them with QDF_OPMODE.
Change-Id: I71cead84151cc0411f7cc5cc13a87a281e7502c0
CRs-Fixed: 2245247
DISA head files include lots of not used public head files, and cause
compilation issue when disable PMO feature flag.
Change-Id: I287f845a3e9f923d042463c34abaedadb905d3b2
CRs-Fixed: 2243947
Currently in functions to show IPA resource info and IPA stats
there are information related to IPA resources memory address.
This may be lead to potential information leak to the location
of IPA resources. Remove the addresses information from the
logs in res info and stats function.
Change-Id: I75d756211c8aaaea300fb207e40a08f5b1ca81e3
CRs-Fixed: 2225361
IPA RM is not used when WDI_UNIFIED_API is defined.
Remove to use wake_lock and rm_lock, which are created from RM setup.
Change-Id: I6c614fde7d6d7f0ab94aa9933578f3dca814a40e
CRs-Fixed: 2231424
Use QDF_IPA_WLAN_EVENT_MAX instead of IPA_WLAN_EVENT_MAX to record
WLAN event to IPA.
Also record QDF_SWITCH_TO_MCC/SCC and QDF_WDI_ENABLE/DISABLE event.
Change-Id: Iada6c39d2b952f6b9a1690a86c5871d2ca588cd2
CRs-Fixed: 2240425
IPA component needs to discard repetitive start_bss event in
case SAP is on DFS channel. Issue is we checked against
available SAP interface and this will lead to second SAP
interface setup failure.
Fix is to check against same SAP interface to see if it has
already been setup.
Change-Id: I2fc3656f5e1fba39dba14dba137c6202c5ec5af0
CRs-Fixed: 2240368
Use get_wmi_unified_hdl_from_psoc instead of GET_WMI_HDL_FROM_PSOC due
to incompatible return types.
Solve renaming dependencies with common side changes.
Change-Id: Ie84641327d64876877c7d26b63d632c79770a88c
CRs-Fixed: 2203055
The Change-Id: I69c813047ab4b1b129e4fb057d8aacbef5cc9efea
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I2c346a266c2c767dd37b5901d8d671e475449a01
CRs-Fixed: 2233325
Add fallthrough comment in pmo_register_wow_wakeup_events
as per linux checkpatch script. Fallthrough required to set
interface type and to set sta wow bitmask.
Change-Id: I6931371e9a2d4421354c19c12e552c75e50cb798
CRs-Fixed: 2233187
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
The following PMO functions have been identified as having off-by-one
logic errors. Address these errors.
* pmo_register_resume_handler
* pmo_register_suspend_handler
* pmo_unregister_resume_handler
* pmo_suspend_all_components
Change-Id: I6a328fc24ae6a575ef56cf9532133eb666e0dc8c
CRs-Fixed: 2232388
