qcacld-2.0 to qcacld-3.0 propagation
In High dense environment roaming should be triggered early
at dense RSSI threshold which provide better throughput result.
Add support for dense roaming parameters to read from ini file
and send to FW with other roaming parameters
CRs-Fixed: 953579
Change-Id: Ia63bfdd1248b4507d988b019f07164a7c75566af
Add VENDOR subcmd to support changing of Fine Time Measurement
capability
dynamically. This command can be used by user space application to
change
FTM capability. FTM capability set by user space is intersected with
capability set by firmware to compute new capability value.
Change-Id: I5f3a57e66f2c6a9f3fa8acc7e9da8cb23cb766e3
CRs-Fixed: 968594
Fix the reason code used during Nss update request. If
there is MCC upgrade or DBS downgrade, the hw mode change
request internally send the Nss update request. But, the
current implementation uses the same fixed reason code
during Nss update request and due to this on receiving the
hw mode change response, the expected callback function is
not getting invoked. Fix this by passing the right reason
code during Nss update request.
CRs-Fixed: 978663
Change-Id: I706cb9a86d66d8601ec87f560459604e562f6037
Ensure that the session id is sanitized before issuing
the scan request. During the transient stages of a new
interface when no session exists for that interface and
if a scan is received for that particular interface, it
would result in scan with invalid vdev id. Validate the
session id to avoid the same.
Change-Id: Ib22262493a141491d1d86ae682b14113d303685d
CRs-Fixed: 973773
Set the hw mode, if needed, during channel switch in STA and
P2P-CLI scenario. The STA/P2P-CLI on receiving the channel change
event may need to do a hw mode change to get the best out of the
hw capabilities.
e.g.1, In a STA+SAP concurrency, the STA and SAP are doing SCC on
channel 6. When the STA interface receives a channel event for
channel 36, it is better the driver moves to a DBS scenario.
e.g.2, In a STA+SAP concurrency, the STA is on channel 6 and the
SAP is on channel 36. When the STA interface receives a channel
event for channel 36, it is better the driver moves from a DBS
scenario to a SCC scenario.
For MCC upgrade, the following steps are taken
1. Opportunistic timer is started
2. vdev restart is initiated on the new channel
3. PM will check if MCC upgrade can be done on timer expiry
For DBS downgrade, the following steps are taken
1. PM will initiate HW mode change to DBS right away
2. vdev restart is initiated on the new channel
Change-Id: I202842bf28c3117e8cc91954cdfd3b39a0062f4e
CRs-Fixed: 972184
Add data length information in oem data response messages. Currently
maximum response size is passed to upper layers.
Change-Id: Id74d44e03755af9a5402e5409ee5f6b5e7abbb7c
CRs-Fixed: 942260
Remove #ifdef WLAN_FEATURE_VOWIFI from host driver source code.
It has alwasys been defined in Kbuild and underlying features
will be permanent in cld3.0. Those features are 11r radio
resource measurement, beacon report, link report, neighbor
report and power constraint.
Please note that WLAN_FEATURE_VOWIFI_11R is used for different
purpose and it is not removed in this change.
CRs-Fixed: 958729
Change-Id: Icd80e9cce08c4662e86ccda94491c1fc22c5756d
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from SME source
code.
CRs-Fixed: 960105
Change-Id: Ib42c92aaca69c04b98dd42b7aab2a552c88af24e
Fix memory leak in OEM data request, by freeing data buffer as message
passed down the layers is consumed in lower layers.
Change-Id: I8e8dc0c96de3055fada2c19139bc9e0c03b9e73e
CRs-Fixed: 964290
Currently Tx beamformee feature is enabled only in STA mode.
Add knob to enable or disable the Tx beamformee feature in SAP
mode
Change-Id: I6ea218b3bff6c973688aad716a3f1a3c8acc469b
CRs-Fixed: 963034
Remove unnecessary acquiring of SME lock in sme_roam_free_connect_profile
since this function does not access any SME structures.
Change-Id: I0ddafc4276ef5028b48fda0ae3ea4e6a0c23245e
CRs-Fixed: 958839
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
Fix style issues like conditional compilation with in the
function and other minor ones.
Change-Id: Iec2dc3aac934bbb90b87d4e8581e877e5b0a561c
CRs-fixed: 959287
Remove typedef tPowerdBm. Rename and use linux style for channel
enum, channel state, channel power and country source data
structures.
Change-Id: Iebc59e6f001ccdb403c7445f4cea02c6a8141366
CRs-Fixed: 856727
Remove the local country to regdomain mapping in the driver.
Return a fixed regdomain index 0 to the caller. Also update
copyright for cds_regdomain.h for 2015.
Change-Id: I33e0a861b0a3bd95b20becb2d765b8300688ec4c
CRs-Fixed: 856727
Send one suspend indication message to wma after configuring
all the offloads. Reduce context switches and complexity.
Change-Id: I020fc8864dbf7378805361d54dc6cff60b2652e5
CRs-Fixed: 935297
SME holds config item in tCsrConfigParams structure as well as some of
the same items in tSmeConfigParams which makes tCsrConfigParams super
set of tSmeConfigParams. There are high chances if somebody misses
copying item from tSmeConfigParams to tCsrConfigParams and that will
result in config item not being set correctly.
In order to make it clean and easy, merge both config structure in one.
Change-Id: I8c93d9fae0986cb90b4ed4c4712b1e2b023b4be3
CRs-Fixed: 963752
Remove the CB mode usage in channel bonding since the center
center frequency is calculated using channel width and channel
number.
Change-Id: Ie9685a833750bf3b69cce40c5d9587fb9b232047
CRs-Fixed: 962174
The current roam sync propagation for LFR3.0 in the host driver is
based on queuing and message processing mechanism. This can lead
to many unknown sequence of operations as there might be other
messages sitting in the queue which may interrupt with this
operation. Hence, it would be good to introduce a callback mechanism
which take care of running the code to execution completely in case
of roam synch propagation.
It also improves to reduce the roam delay by 50 percent as compared
to the existing mechanism.
CRs-Fixed: 962290
Change-Id: I4af569b1e3020a64beb606e8bbffd7613775138f
qcacld-2.0 to qcacld-3.0 propagation.
If MC thread stall while waiting on any event, In case of WPS,
probe requests may get accumulated in PE message queue.
Now every time MC thread process a probe request,
eWNI_SME_MGMT_FRM_IND msg is posted in SME message queue. But
unless PE queue is fully processed SME queue won't be processed.
This will gradually use all vos message wrapper.
To avoid this register a callback to send management frame
indication directly to HDD from PE which avoids posting message to
SME queue.
Change-Id: Ib83700825112cc52dade594909bfa8993909ac29
CRs-Fixed: 944961
qcacld-2.0 to qcacld-3.0 propagation.
1.Use iw tool to let dut connect to remote ap, dut is working
on wlan0.
2.At same time, use hostapd to start sap also on interface
wlan0.
In item1, before connect to ap, dut will do an internal scan
to search ap, if scan result matched configured ap profile,
dut trys to connect to ap.
In item2, when starting sap, found it's sta mode it will try
to disconnect dut with remote ap and close sta session.
#1 If ap start action happened in item1's scan period, trying
disconnecting won't take effect as currently sta has not yet
connected with remote ap.
So after item1's scan finished, dut continues to do connection.
#2 During closing sta session, sme issued eSmeCommandDelStaSession,
as currently sta is doing connection, so session is in started
status, this cause closure failed, so there is no chance to remove
cmd in smeCmdActiveList.
While cmd pending in smeCmdActiveList for 120s, driver issued crash.
The solution is in item1 after scan complete to check whether it's
needed to start following connection. If stop action has been issued
during scan period, then don't do the connection.
Change-Id: If632e21cb13277fba371ff1bf8df97febf856d09
CRs-Fixed: 923375
In case prefer 5 GHz preference is set, move the 5GHz channels ahead
of 2GHz channels in channel list as used in Early Stop Roaming Scan
feature. This ensures that while roaming, when these features are
enabled DUT will scan 5 GHz channels first and roam if a candidate
AP is found.
Change-Id: I96d997560a3eca5fd378aa3ed78c5766d097cafd
CRs-Fixed: 951959
qcacld-2.0 to qcacld-3.0 propagation
The firmware reports the Enhanced Green AP (EGAP) service
(EGAP_SERVICE) feature flag to indicate the support of EGAP
feature.
The EGAP is to offload the legacy Green AP feature to firmware
in order to aggressively enable the Green AP other than wait
for host control latency.
Add the knob to hold the EGAP infomation when firmware support
it, also populate the information up to hdd target config.
And then add a SME interface to allow hdd layer to configure
the EGAP configuration.
Change-Id: I9be927369e7cf07731f8e9ba49d65224e05c340b
CRs-fixed: 929063
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef FEATURE_WLAN_LFR compiler flag from SME so that the code
will always be compiled in.
CRs-Fixed: 936683
Change-Id: I86b9e3dee6b92c89a54de6df769800c31fc3ad17
The condition #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING is used to include
some of the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING compiler flag from SME
and CSR so that the code will always be compiled in.
CRs-Fixed: 936683
Change-Id: I63a43b7cfd9360341d4ac4126cbf9fc8ac89071a
The condition #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING is used to include
some of the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING compiler flag from HDD so
that the code will always be compiled in.
CRs-Fixed: 936683
Change-Id: I777d48f26aea36383747281bd4fef2eadc7beefb
qcacld-2.0 to qcacld-3.0 propagation
As a part of logging enhancement,to make logs more
interactive, changed pmcstate,scanType etc from
numerical values to human readable string in
Protocol stack.
Change-Id: I589088c2c5fd0afa106a1d0773a2ff525b0dd083
CRs-Fixed: 638916
qcacld-2.0 to qcacld-3.0 propagation.
The SME OEM DATA request API supports a callback function pointer,
however this callback functionality is obsolete. Therefore remove
this functionality.
Change-Id: Id06910841ad625412ba1f3222407e471f4d7edd7
CRs-Fixed: 911404
LFR3 to indicate the change in IP subnet to user space (supplicant).
This enables the DHCP refresh in case of IP subnet change during
roaming.
Change-Id: I9842a28461346fe97ab39f5a11ae504f2e32fa16
CRs-Fixed: 876335
qcacld-2.0 to qcacld-3.0 propagation.
Add new TDLS mode for TDLS external control operation to
achieve power save on the target. Firmware will use this mode
to control timers precisely and save the power.
Add configuration "gTDLSPeerKickoutThreshold" to fine tune
TDLS peer sta kick out operation.
Change-Id: Ie941f93b54983ca6323ef4384a66e0807a56a7b1
CRs-Fixed: 929749
Fix mangled APIs sme_configure_ext_wo_w,
sme_process_ready_to_ext_wo_w and
lim_remove_timeout_pbc_sessions which were introduced
while converting the names programmatically.
Change-Id: Ie0a79b476a99bf1be0411dae0542359e7d58141a
CRs-Fixed: 882962
qcacld-2.0 to qcacld-3.0 propagation
This reverts Change-Id I858cd3cbd536ec189ea808c5d637abffe388f7aa.
With change id I858cd3cbd536ec189ea808c5d637abffe388f7aa,
host is not sending WMI_STA_UAPSD_AUTO_TRIG_CMDID command to firmware
during disable UAPSD per AC.
Change-Id: Ifdbcd6926ca86b1baeeadcf7a4720e460d41a6e5
CRs-Fixed: 911229
qcacld-2.0 to qcacld-3.0 propagation
Create a configuration item to program the first bucket
threshold of the scan results to have the flexibility to
adjust the first bucket threshold.
CRs-Fixed: 922979
Change-Id: I6fad27a2990f7555173e4735131e8392d0277009
This is qcacld-2.0 to qcacld-3.0 propagation
Currently in SAP mode, if max STA connected a operation to turn off
SAP will result in more than SME queue length cmds being enqueued.
To fix, this patch:
1) Makes the SME cmd queue length, 3 times the max STA.
2) Because of increased SME cmds, the allocation for all cmds
together will fail, hence allocate each SME cmd individually
and free them accordingly.
Change-Id: Ia1dfc5b00eacd9bdb503ce18927c62f1edd15320
CRs-Fixed: 928840
