Affine DP RX Threads to perf cluster in high throughput scenarios.
High throughput is detected using existing logic from the bandwidth
timer.
Change-Id: Ieb98c6930807ba42be7f5b4d0b8a78dfb197ba27
CRs-Fixed: 2474322
Linux coding style doesn't allow camel case notations. So
rename pLimJoinReq to be in compliance.
Change-Id: I813179ef538bdc4b4207123b5f7b7f6601091cf9
CRs-Fixed: 2480399
Previously no logic for channel switch
restrictions in sap_random_channel_sel.
Enable flags to allow user to control the
DFS random channels switches through INI
gSapPreferredChanLocation.
Change-Id: I992616a8be71018f5ea372d286238b4c87aa8338
CRs-Fixed: 2478371
Currently the driver does not check whether the
ACS cfg's chanel list is valid or not and checks
for the best channel within it in the function
wlansap_is_channel_present_in_acs_list, which can
lead to potential pointer deference.
Fix is to check the channel list and then only
process for comparison.
Change-Id: Icda2e7c8f260eb636c8159fbbb697400dddbdf74
CRs-Fixed: 2479941
The old change I7e5a21601642e0d6afef73beeecf80a3e0475909
is missing when new scan mgr introduced, re-design the
change.
If DFS AP present, station scan 5g chanlist should be
avoided if target doesn't support Agile DFS Scan in Single
MAC mode. And also if current hw mode is DBS, the 5g chan
scan is not allowed as well.
1) if agile & DFS scans are supported
2) if hardware is DBS capable
3) if current hw mode is non-dbs
If all above 3 conditions are true then don't skip any
channel from scan list.
Change-Id: I3773c1c63ea3f33db6f6ee2c31cb5d09d3c2ae71
CRs-Fixed: 2471542
If memory pNewBssDescriptor is allocated successfully, it should not
return, otherwise there is memory leak.
Return if memory pNewBssDescriptor allocation fails.
Change-Id: Ibe906abe890630efa1ea5dafaef40afc2822158e
CRs-Fixed: 2476403
Driver will reject with channel 0 when check channel ok for DNBS,
without this fix, wlan_cfg80211_mgmt_tx API will fail when channel is zero.
Change-Id: I89edc81c45104d0994cd65262c1f5545f0f6970f
CRs-Fixed: 2476420
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by default.
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by HST.
Change-Id: I36154976c4e106d9910977b5990f796b889eaf82
CRs-Fixed: 2476488
After roaming the phy mode gets updated by FW via roam_sync event.
Update wma with the value from the roam_sync event.
Change-Id: Ie4b47ad83866f033bcd92781fdb05bd7456180f5
CRs-Fixed: 2477071
When hdd_trigger_psoc_idle_restart is called from hdd_open,
if the process has some signal pending, pld_idle_restart
may return back before finishing start_modules. If keep running
in hdd_open, when creating vdev it may access invalid
pdev.
In hdd_open, change to return failure if idle_restart returns
error.
Change-Id: I454d421d0758dd4e90c4b4fba1f65096c0834446
CRs-Fixed: 2476316
With the latest code in the following functions:
wma_add_bss_ap_mode
wma_add_bss_ibss_mode
wma_add_bss_sta_mode
wma_set_channel
hardware mode retrieval becomes unnecessary because
the DBS related config is not checked anymore.
Change-Id: I4fe03dee7148b17a6f2a40208d1cb77013db4c98
CRs-Fixed: 2478160
Currently, if roaming in progress TDLS peers are not deleted in
WMA layer and obj mangaer this can lead to peer leak
Clear these peers in case of roaming also.
Change-Id: Ie94cf7b77dfef339b50f2f9bca879ae4b76d2eab
CRs-Fixed: 2471057
Auto usercase allow AGO to start on DFS channel.
We need to do similar CAC allow/disallow check in GO mode
as we do in SAP mode. We should skip CAC as DFS master
functionality may be disabled based on INI configuration.
Merge the SAP CAC allow logic to GO interface.
Change-Id: Iba89b8b3f170d6ffe97f53198ad041e7ceb41b44
CRs-Fixed: 2474391
Fix out of bound issue in get pcl API where the
num of channels in the valid channel list can be
greater than the pcl list size, and can lead to
out of bound access.
Change-Id: Id3d34ff66c712bf310ae2689c43ce873f5c87fca
CRs-Fixed: 2475705
Currently the drivers blocks every simultaneous scan
that comes to the driver, and returns BUSY.
here if the STA SCAN which is low priority after connection
comes, and at the same time ACS has completed and the hostapd
tries to do a HT scan, it would get error as BUSY, and it
will try to scan again and again until successful or the timeout
happens. This will in turn delay the hotspot bringup as start
ap does not come until the hostapd does a OBSS scan.
Fix is to skip the check of simultaneous scan for SAP, and make
the priority of scan request high for SAP scan.
Change-Id: I5625a3e7c05f75238771ea1ec35b80ae5113bbc3
CRs-Fixed: 2471854
wpa_supplicant sends connect request with open auth and pmkid
when PMK caching is enabled and if it has PMK/PMKID cached.
Set rsn_auth_type to SAE when connect request has AKM as SAE
auth_type as open.
Set negotiated auth type to OPEN in SAE with pmk cache case as
open authentication going to happen. Similar fix is applicable
for FT-SAE. Handle the same.
Change-Id: I9ccc419bd439702041840b0194bb0622d7856255
CRs-Fixed: 2467813
Add ini support for FIPS 4-way hanshake offload to firmware. FIPS
offload feature will add support to handle LFR 3.0 connection only
(auth/reassoc). If this ini is set then firmware will offload
4-way HS to supplicant. In the Roam sync indication firmware will
inform connected and not authenticated so that supplicant can take
care of 4-way HS.
Change-Id: I3da58910218ffc57094cac4c3cab4572631d9404
CRs-Fixed: 2459182
In P2P GO mode, if the P2P client device is not VHT capable and
only HT capable, but the DUT P2P GO is VHT capable and advertises
2x2 NSS and sends packets with 2x2 rates, it results in interop
issues with HT only capable P2P client devices.
When GO is operating in DBS mode, GO beacons advertise 2x2
capability but include OMN IE to indicate current operating mode
of 1x1. But here peer device is only HT capable and will not
understand OMN IE.
Check if the P2P client device is only HT capable and has
"\x00\x50\xf2\x04". Then downgrade the P2P GO operation to 1x1
nss. Modify rx mcs map value in association response to enable
only mcs 0-7.
Change-Id: I7177c5aee9a560a20c50a63886c0ee77f7d617ae
CRs-Fixed: 2464925
During roam fail, if firmware doesn't have any interface left on
2.4Ghz it moves to SMM from DBS, But doesn't inform to Host, which
assume DUT is in DBS mode and thus can send VDEV start on 2.4Ghz
without switching to DBS mode. This lead to assert in firmware.
To fix this firmware will indicate the new HW mode in ROAM INVOKE
FAIL and HO FAIL during roam. so handle the new HW mode indication
and update the host HW mode from the new HW mode indication. So
that host and firmware remain in sync
Change-Id: I854faea17c8eccf212b4efb9443b297cadca62b0
CRs-Fixed: 2473532
If platform support dbs, 1st AP start on 5G DFS channel, 2nd
AP should be able to start on 2G on another MAC, no MCC will
happen.
If override 2nd AP from 2g channel to 5g, 2nd AP can't start.
Change-Id: Icee7a5c432e0b96d71b51685955d820b0f619c8d
CRs-Fixed: 2470807
When get station command received by driver, host is
filling rx_mpdus and fcs_error count into output station
info buffer but corresponding flags are not getting set
because of which user space is not able to parse these
values.
To avoid this issue, set corresponding flags for rx_mpdus
and fcs_error count in stainfo buffer.
Change-Id: I0801501d0ede15c9c818d677b5e85e47963f4cff
CRs-Fixed: 2477654
In wma_is_roam_in_progress function, return false if wma pointer
returned from cds_get_context is NULL.
Change-Id: I0a3447f038a45ea93e769142cb5883a3f39c0991
CRs-Fixed: 2475071
Processing beacon request may fail due to
some reason.
In Ie07dbb1f45803cf93b45df2173f0ad064a194cb3,
sta fails to send empty beacon report to
AP and frees current rrm beacon request structure
because it doesn't find matched session by bssid
in rrm_process_beacon_report_xmit.
Copy bssid of beacon request to rrm session then
sta can send empty beacon.
Change-Id: I962d058d5e3f8f85194f4197c5ff8c061d56f60c
CRs-Fixed: 2472377
Firmware expects btm_offload_config value as 0x1c1 by default
so that BTM query is enabled. To enable BIT 7, "prefer_btm_query"
ini is used and its default value is 1. To enable BIT 8 in
btm_offload_config, "prefer_roam_score_for_candidate_selection"
ini is used and its default value is 1. Enable the BIT 6 also
by default.
Change the default value of btm_offload_config to set bit 6 by
default.
Change-Id: Ic0b222c281d1731aaf21aaff6a72ebf1f1f930de
CRs-Fixed: 2466687
Firmware allocates memory as part of WMI_INIT_CMDID based on number of
STA vdevs and max number of vdevs. If we try to create more then
max limit then firmware will crash.
Added check to check for max limit before creating the interface.
Change-Id: I3e73c9f1b3c925465452a23ea5f25f47e4eb1ada
CRs-Fixed: 2468171
In monitor mode even if vdev start fails, vdev up is sent, which
leads to assert.
Fix is to move the vdev state machine to init state on vdev start
failure and not to send vdev up.
Change-Id: I89e6294329ba0541d0d86c5728ce36898a199659
CRs-Fixed: 2475370
Host driver should exit if it fails to initialize
__cfg_global_store to avoid assertion hit.
Change-Id: I404e5da69cd2c4cf06d55a1d7a96d0aee1e5e4a4
CRs-Fixed: 2454969
Since system is awake when runtime PM suspend/resume happens, there is
no need to send DTIM related WMI commands with WOW sequence during runtime
PM resume as unlike system suspend, these commands are able to be sent from
other paths. It will just trigger runtime PM resume which is expected
behavior.
Change-Id: I51d0f45c0223a0c0e3c61bbcb7135a590359b08d
CRs-Fixed: 2475111
In function tdls_ct_idle_handler, idx is assigned from
tdls_info->index which can be 0 254. But tdls_conn_info
is static array in tdls_soc_priv_obj of size
WLAN_TDLS_STA_MAX_NUM (8). So check idx is less than
WLAN_TDLS_STA_MAX_NUM or not to avoid OOB memory access.
Change-Id: I8387cb0a44a79f0f83b25c12de2aa9fbc39ab2f3
CRs-Fixed: 2474432
