Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
auth_failure_timeout is updated as part of
lim_check_and_announce_join_success for p2p client with NOA.
And the default value is stored in pe_session->defaultAuthFailureTimeout
After receiving the auth resp or in case of auth failure the
auth_failure_timeout is reset to default value. But there is any other
failure and pe session is deleted then the auth_failure_timeout is
not reset. And p2p cli connection will use the wrong auth timeout.
And can result in connection delay's if GO doesn't send the auth response.
Reset the auth_failure_timeout to defalut as part of pe_delete_session.
And decrease the max value to 5000ms.
Change-Id: I374bf45279f086127ef062b83a06049c895c4675
CRs-Fixed: 2343832
There are two cfg setting parameters defined for SU Tx beamformer
and improperly updated the cfg settings hence the Tx beamformer
capability advertised as unsupported always.
Remove the redundant setting for SU Tx beamformer and update the cfg
with correct values.
Change-Id: I422179ae87ab5c561f0356bcab4585fbdc53c0bd
CRs-Fixed: 2343090
Add the basic infra for legacy DP CFG items and the APIs
to be used from other components.
Change-Id: If7ad0e02c65e04ea13a308e680c9ba3b3d84ae25
CRs-Fixed: 2324099
Remove legacy cfg items definitions and related macros for the
converged CFG items.
Change-Id: I12944f50d68dafe989417dda777f29a6233c97a4
CRs-Fixed: 2340856
Remove the definition of following INI & CFG Items
for VHT caps which is common for HT and HE caps.
CFG_VHT_LDPC_CODING_CAP
CFG_VHT_SHORT_GI_80MHZ
CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ
CFG_VHT_TXSTBC
CFG_VHT_RXSTBC
CFG_VHT_RX_MCS_MAP
CFG_VHT_TX_MCS_MAP
CFG_VHT_BASIC_MCS_SET
Change-Id: I55390c3391a0be272c609030dae232d767111fcf
CRs-Fixed: 2333183
Wireless application needs to tune parameters per AC based.
Such as VI/VO queue use the different re-transmission attempts
while other queue keeps the default value. It helps to improve
the video/audio performance in noisy environment. this change
add the ability to config re-transmission attempts of non
aggregation QOS packets.
Change-Id: I95404302463275803e3feff3038f04c900b14705
CRs-Fixed: 2323555
To keep names of PMO ucfg APIs consistent, change some of them from
"pmo_ucfg_xxx" to "ucfg_pmo_xxx".
Change-Id: I77165be8c5c408c3f91f84a477c15be1c6ea15e8
CRs-Fixed: 2334109
dot11p_mode is currently represented with a uint8_t type, despite an
appropriate enumerated type being available. Change the field's type to
the more restrictive 'enum dot11p_mode' instead of uint8_t.
Change-Id: I847ce0901297b0a3e4312e8ce4124a886320f174
CRs-Fixed: 2335575
LFR2 uses ft reassoc, whose process is different from general
connect.
1.ft reassoc, normal reassoc and assoc, all of 3 need deliver
event WLAN_VDEV_SM_EV_START to SM, but need different handler.
2.ft reassoc send vdev start when add bss, not switch channel.
Change-Id: Ieefbcf0a28867be3c8a86d9a912143857c54fe06
CRs-Fixed: 2334194
In mlme_update_vht_cap, local structure is updated instead of
mlme global structure for vht caps and thus the mlme vht caps
contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: Ifa3d30ae202f1a4b6361db1a504861918f7ebf2c
CRs-Fixed: 2334955
Following changes were made -
- Replace #ifdef CONFIG_LITHIUM with QCA_WIFI_QCA6290 and QCA_WIFI_QCA6390
flags. CONFIG_LITHIUM is not defined to be used within the code, the
individual chip specific flags are defined, hence use those.
- Pass IPA enable/disable ini configuration to DP layer
Change-Id: If0bfdaf408b06a922923e998c0c6ad2157e2c080
CRs-Fixed: 2328711
Policy Manager component needs to adopt a new INI/CFG
infrastructure.
Provide a new infrastructure and remove old INI/CFGs related
to policy manager component.
CRs-Fixed: 2324393
Change-Id: Ia16845c2aef3c5877b0b164fcef13fe7cd41c736
Do softirq for every 32 RX packets from 16 for IPA exception RX path.
Which will improve RX throughput much better.
Change-Id: I717d23714d1d0ae72550a06fd4df0817195f658b
CRs-Fixed: 2250253
For STA interface, add support to send VDEV_UP command to firmware when
VDEV state is transitioning to VDEV_S_UP.
Change-Id: Ic8f4e8355381d915f4c1c7f6650950d7d12d9db3
CRs-Fixed: 2333297
In order to catch and debug long running transitions, add a watchdog
timer to Driver Synchronization Core (DSC) transition start/stop call
pairs. If the timer expires, panic the driver for offline debugging.
Change-Id: I9b64fdb9cc20e1225394702d58b24db92a2d67e1
CRs-Fixed: 2328596
In order to catch and debug long waiting transitions, add a watchdog
timer to Driver Synchronization Core (DSC) transition start wait calls.
If the timer expires, panic the driver for offline debugging.
Change-Id: I557f87ada182ced389e7d5e63fe8b78f47e1d6b5
CRs-Fixed: 2328594
In order to catch and debug long running or stuck operations, add a
watchdog timer to Driver Synchronization Core (DSC) operation start/stop
call pairs. If the timer expires, panic the driver for offline
debugging.
Change-Id: If93914178622b993fb09c7330fded2e9bc1c25d1
CRs-Fixed: 2328591
VHT Part3: Add the basic infra for MLME CFG items and the APIs
to be used from other components for VHT.
Change-Id: I8cd30439d7ac3de7b550aa5042353cf30e04cbda
CRs-Fixed: 2322304
Create and send user configurable ini for max number of roam preauth
retries and roam preauth no-ack timeout to the firmware.
Change-Id: I66808b33f421f56cd7c007cdde1db19c8e7ca5f9
CRs-Fixed: 2279049
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-2
Change-Id: I8f9c8286861c5a7b17d0261cad6c51b431e86f4a
CRs-Fixed: 2322302
Ic3121092c71d5c46e8521a775281ad2c45e3fe7d changed the driver-level DSC
context allocation method from static to dynamic. As a side effect, the
DSC driver lock needed a driver instance pointer instead of grabbing the
global context. However, many of the lock calls were updated to use the
input context pointer before it was validated.
Ensure the input context pointers are validated before using them to
grab the DSC driver lock.
Change-Id: Ifce2d603f3e9b7b7c0869a40f8632988a9509809
CRs-Fixed: 2327110
At ipa wdi initialization host needs to fill structure
ipa_wdi_init_in_params and pass to IPA driver. Currently
host is filling the local stack structure with out zeroing
out the memory and passed to IPA driver. This will lead to
invalid assignment of struct variables to IPA driver copy
for which host did not fill. So before using the ipa wdi
initialization structure mem zero it.
Change-Id: If054c2175741e6f23ebbf2165761aee8e2f8e2f0
CRs-Fixed: 2322734
Upon driver reinitialize after a FW rejuvenate,
data packets are not going through IPA path.
Check for FW rejuvenate scenario during driver
recovery and send appropriate message to IPA
driver.
Change-Id: I8c1d7ba78227684cd5653a5927aa4d4c2ce5d354
Crs-Fixed: 2287293
Replace usage of the below INI Items using MLME CFG instead of HDD config.
gPreventLinkDown
gSelect5GHzMargin
gEnableMemDeepSleep
gEnableCckTxFirOverride
gEnableForceTargetAssert
gEnableLpassSupport
Change-Id: Ib89272c7898db8d0c70a60640e00ca9364a9db74
CRs-Fixed: 2327025
Add the following WMM AC VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I402ff46aad528d7c4bbaa794b6fba498439f8e97
CRs-Fixed: 2327048
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-1.
Change-Id: Ie74bfd42ed3d34cc218f20ee3f9d81dc6af02172
CRs-Fixed: 2322300
PMO returns failure codes for enable/disable of NS and MC List offloads
when their respective configurations are disabled. As this is expected
behavior, return success instead.
Change-Id: I91b00da9b4026f5975c14f5889cd913b13e1347b
CRs-Fixed: 2323312
gEnableEarlyStopScan is for early stop feature. Since it’s based
on rssi only, make the default value 0 on score enabled code
base.
Change-Id: Ie0e0483359d5a7e2cc969001af03500c9e8209c6
CRs-Fixed: 2311372
Since refined PMO configures based on converged cfg component, apply
PMO configurations, remove related legacy codes.
Change-Id: I2cdf18c1000d8cc923c80c00bf530b2b0c60563e
CRs-Fixed: 2322185
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Remove the legacy definitions that are related to the WEP
cfg.
Move them to mlme component
Change-Id: Ibcec8adf15123d12ad7c2eb6ed770b44a093673a
CRs-Fixed: 2324046
Add mlme cfg api functions to get EDCA parameters.
Also remove the legacy CFG item definitions.
Change-Id: I075240279e2cf3fda4424b77b7cfcf50ac9619f4
CRs-Fixed: 2316205
Add CFG items of RTT and PMF as generic items based
on converged cfg component.
Change-Id: Ic95d1e7b052259149704d9faf65ebe5f51536fdf
CRs-Fixed: 2313281
The DSC driver context was originally statically allocated to allow its
creation before QDF was initialized. However, other complications with
the QDF debug infrastructure lead to QDF being initialized before DSC
anyway.
Static allocation has a number of drawbacks (esp. see singleton
anit-pattern), which impacts our ability to do unit testing on a driver
which actively leverages DSC. To support unit-testing DSC in a driver
which also uses DSC, move the DSC driver context to dynamic, instead of
static, allocation.
Change-Id: Ic3121092c71d5c46e8521a775281ad2c45e3fe7d
CRs-Fixed: 2320599
Remove the legacy macro definitions that are related to the
mlme cfg.
Move them to wlan_mlme_public_struct.h
Change-Id: I64f474512463d3ba7ac238b2efd0f4cf2e36999b
CRs-Fixed: 2317750
Rename mlme_update APIs in wlan_mlme_main.c to mlme_init as these
APIs initialize the MLME structures and init is a more appropriate
for these APIs.
Also re-order defines in CFG_MLME_ALL to be in alphabetic order
similar to CFG_ALL
Change-Id: Ia8e10d86c62cc46230ef4c3d51c9588eaa1a5477
CRs-Fixed: 2318497
Currently, the return value of get_wmi_unified_hdl_from_psoc() API
is passing directly as argument to some functions without checking
the return value for NULL which may cause NULL pointer dereference.
To address this issue, add NULL checks for return value of
get_wmi_unified_hdl_from_psoc() API where ever it is getting used.
Change-Id: Ieb4ff997960aac915b4dc40cb0d17070240d9b1f
CRs-Fixed: 2316854
Currently during SSR IPA events such as AP DISCONNECT/
STA DISCONNECT are not sent and also wlan ipa interafces
are not deregistered. After SSR when host sends AP CONNECT/
STA CONNECT and register interafce IPACM will reject as for
previous events before SSR there are no disconnect events.
This leads to data come via exception path instead taking
IPA HW route as interface headers are not registered.
In this fix send IPA UC disconnect events and deregister
interafces during SSR.
Change-Id: I6e617261ec53b7d572023613d212eae057b13b03
CRs-Fixed: 2315828
Implement the usage of MLME CFG infra for BSS Scoring related INI Items
and remove the older INI definitions from HDD.
Change-Id: I0db69138f0439131916a38176b5b21b706ff3671
CRs-Fixed: 2318320
Currently, the return value of get_wmi_unified_hdl_from_psoc() API
is passing directly as argument to some functions without checking
the return value for NULL which may cause NULL pointer dereference.
To address this issue, add NULL checks for return value of
get_wmi_unified_hdl_from_psoc() API where ever it is getting used.
Change-id: I60e89b5305ad31d8663a8feed3cb0f71105bb060
CRs-Fixed: 2316868
Define mlme lfr configures based on converged cfg component, add
APIs to get and set mlme lfr configurations.
Change-Id: I8aa9b37d1b943fcdc6a84704ede37b19cd7cffb8
CRs-Fixed: 2316490
Add the MBO ini configs to mlme for the following:
1. CFG_MBO_CANDIDATE_RSSI_THRESHOLD
2. CFG_MBO_CURRENT_RSSI_THRESHOLD
3. CFG_MBO_CUR_RSSI_MCC_THRESHOLD
4. CFG_MBO_CAND_RSSI_BTC_THRESHOLD
Change-Id: I9e779c912538973c8281170ec8c212a4f05b7e2e
CRs-Fixed: 2314168
This change Removes legacy APIs to modify vdev state machine and
add use new API to get vdev state.
Change-Id: I48aa3744dafc6d13a43a14e48de821c7dadf3a37
CRs-Fixed: 2314730
Define mlme sta configures based on converged cfg component, add
APIs to get and set mlme sta configurations.
Change-Id: I1a03037081ebe27760d23405adc3cc9042ba7698
CRs-Fixed: 2312002
Remove the legacy INI code from hdd_cfg. Replace the existing
access from hdd_config with new mlme api.
Change-Id: Iddde15330c1ad39a59bd9a3c7ea86af971df61b5
CRs-Fixed: 2313296
IPA driver calling WLAN driver callback, and in parallel WLAN
driver is unloading and freeing this callback, which leads to
a use after free scenario
Add SSR protection wrapper to all of IPA callback APIs in driver
to avoid racing against driver unload or SSR or self recovery
Change-Id: I5dcdfe4749b89104ec79eac060e60fe5aa7c2335
Crs-Fixed: 2307365
This is for adding support for FW offload component. It is responsible
to offload all the ini params that are needed by the firmware. To have
this component, the new files added are
components/fw_offload/dispatcher/inc/cfg_fwol.h
components/fw_offload/dispatcher/inc/wlan_fwol_ucfg_api.h
components/fw_offload/dispatcher/src/wlan_fwol_ucfg_api.c
components/fw_offload/core/inc/wlan_fw_offload_main.h
components/fw_offload/core/src/wlan_fw_offload_main.c
components/fw_offload/dispatcher/inc/wlan_fw_offload_public_struct.h
The fw_offload_main.h is to take care of the public APIs for the
component. The corresponding .c file implements the init/deinit of
the component. The fw_offload_public_struct.h is to define the public
structures needed. The ucfg files are for the APIs that can be called
from other components. The cfg_fwol stores the INIs and CFGs.
Change-Id: I4405b87e6dec15aa94146f8ec550078c3d03b1e6
CRs-Fixed: 2307837
Remove the legacy ini config values defined in hdd_cfg.
Call the mlme cfg get api to retrieve chainmask config values.
Remove the tx_chainmask_cck from cds_config as mlme object is
not initialized during cds_open. Call mlme cfg api during
wma_open to populate the tx_chainmask_cck value.
Change-Id: If48aeb62cf35e2e604be2b72845b8e98c5c313dc
CRs-Fixed: 2310382
Add the following chainmask INI configs to MLME cfg:
1. CFG_VHT_ENABLE_1x1_TX_CHAINMASK,
2. CFG_VHT_ENABLE_1x1_RX_CHAINMASK,
3. CFG_TX_CHAIN_MASK_CCK,
4. CFG_TX_CHAIN_MASK_1SS,
5. CFG_11B_NUM_TX_CHAIN_NAME,
6. CFG_11AG_NUM_TX_CHAIN_NAME,
7. CFG_TX_CHAIN_MASK_2G_NAME,
8. CFG_RX_CHAIN_MASK_2G_NAME,
9. CFG_TX_CHAIN_MASK_5G_NAME,
10. CFG_RX_CHAIN_MASK_5G_NAME
Introduce the basic infra APIs related to these configs from mlme
Change-Id: I56b56fe9ba5282b459bc03587c2cacbf91b12af3
CRs-Fixed: 2310381
In the scheduler_post_message, src_id is now added to
know the source module of the msg. the present scheduler
doesn't know about the same which is scheduler_post_msg
Replace the scheduler_post_msg with scheduler_post_message
Change-Id: I869e14830b2f57b951033ada5957594fac7bc4c2
CRs-Fixed: 2305994
Add the following SAP/STA protection ini and cfg parameters to MLME cfg:
CFG_PROTECTION_ENABLED - CFG
CFG_FORCE_POLICY_PROTECTION - CFG
CFG_IGNORE_PEER_HT_MODE_NAME - INI
Change-Id: I3763d62c6aa4ae79a5a31dfac248e8367b6369ad
CRs-Fixed: 2310378
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Fixed the naming conventions of APIs and files for MLME component.
Internal MLME component only APIs are in wlan_mlme_main.h/c files
under core.
APIs exposed to other components are in wlan_mlme_api.h/c files
under dispatcher.
APIs exposed to HDD are in wlan_mlme_ucfg_api.h/c files
under dispatcher.
mlme_init/deinit, mlme_psoc_open/close are called from HDD,
so made that as ucfg APIs.
Change-Id: I049008ceaa86ca52acd3ad9a02f903a732117d1f
CRs-Fixed: 2309276
When AP_DISCONNECT event occurs during IPA resource unloading
in progress, unload time out can happen due to IPA driver taking
time in suspending pipes or delay in FW HTT responses. In such
case events are added to pending queue. Pending queue events are
executed in worker thread context when resource unload is complete.
There is possibility of delay in scheduling of worker thread. When
worker thread is scheduled after HOST sends VDEV DELETE to FW and
processing of AP_DISCONNECT pening event will leads to FW assert.
Reason is as part of AP_DISCONNECT host sends IPA OFFLOAD disable
to FW on deleted vdev id. So send IPA RX offload disable command to
FW when AP_DISCONNECT is added to pending queue.
Change-Id: Ib24deb7654496ec60a3e56b8a9d1e1bd2d8c2db5
CRs-Fixed: 2295105
In target_if_action_oui_send_req(), there is no NULL check against
return value of GET_WMI_HDL_FROM_PSOC() which can result in NULL
pointer exception. Therefore, add NULL check.
Change-Id: Ibbc4fdf03563496b9d5dac63141921dd8bdea4fa
CRs-Fixed: 2299793
Add support for wildcard OUI 0xFFFFFF in action OUI framework.
When the OUI FFFFFF is defined for some action OUI ini and bit 0
of info_presence bit is set to 0 then the check for vendor OUI
in vendor specific IEs and the vendor IE data checks are skipped
and other checks like MAC, Capabilities are done during connection.
Change-Id: I6e996c5d79f4f7bd91e11134b1b8ba69a1ff0253
CRs-Fixed: 2293167
Add the basic infra for MLME CFG items and the APIs to be used from
other components.
Change-Id: I39654de8f7266089d574b85437a19e8d21f91249
CRs-Fixed: 2293825
Remove the debug assert added in wlan_ipa_uc_disable_pipes when
the check for IPA pipes disabled is true. Anyway logging is in
place to give information about the scenario.
Change-Id: If2906f0ee827e84df4594693702064cd249c564c
CRs-Fixed: 2295461
Update driver to use NAN config params based converged CFG
component. Cleanup hdd config references to nan ini params.
Change-Id: I5af85d68ee53ad557e64523f7a1719e328536926
CRs-fixed: 2290360
Add support for new 1x1 connect with 1 Tx/Rx Chain action OUI to be
parsed and sent to the FW. From host during connection, the behaviour
is same as existing connect 1x1 action OUI where nss is sent to 1 to
the FW, but the FW takes the decision to use only one Tx/Rx chain
based on the OUIs defined in the new action ID.
Change-Id: Ia464209043dc73bcc71577c43b28fbe13e780c23
CRs-Fixed: 2264326
FW assert is observed when HTT_WDI_IPA_OPCODE_TX_SUSPEND is sent twice
in a row. Issue is that CLIENT_DISCONNECT and AP_DISCONNECT could both
trigger IPA deactivation when CLIENT_DISCONNECT is poped from pending
queue and in another thread AP_DISCONNECT event arrives.
Fix is to add check for resource_unloading flag and if resource_unloading
is set to true, IPA deactivation is ignored since deactivation is already
undergoing.
Change-Id: I68a245809e263ce396b910c4cc3d4e6b071812c0
CRs-Fixed: 2288941
Several logs show up repeatedly in dmesg. Reduce the following logs to
help avoid spamming dmesg:
* wlan_ipa_wdi_meter_notifier_cb()
* hdd_print_netdev_txq_status()
* hdd_wlan_start_modules()
* hdd_wlan_stop_modules()
* csr_nonscan_pending_ll_peek_head()
* sme_qos_statustype()
Change-Id: Ic5ca059f258dee92ffaa4b0ecca47df41b424c11
CRs-Fixed: 2292710
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 5, add the unit test implementations.
Change-Id: Ia68d6df18894b254c1f5fe3855d896e96be38a90
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 4, add the vdev-level implementation.
Change-Id: I3f5ef0f7abf24a45d757d286d450ef086640c56a
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 3, add the psoc-level implementation.
Change-Id: I30406c61e89cc220a2697e13f38289554985a7bf
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 2, add the driver-level implementation.
Change-Id: I86630edfe11e89cc035974ae76ed3908cf68cde4
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 1, add common infrastructure and headers.
Change-Id: Id290e66d2dccd28b89fed5f285d3692ff3c814e7
CRs-Fixed: 2290260
A number of HDD and IPA logs are generally unnecessary and have been
identified as contributing to log spam. Reduce these log messages to the
debug level.
Change-Id: I2f92bb4caec5adc65fdad0146298aa5f88b43def
CRs-Fixed: 2288430
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: Id808fef623b82cec38fc31071ef384f3ff0c92da
CRs-Fixed: 2278874
When wlan driver unloading is in progress, IPA_OPCODE_TX/RX_SUSPEND
will not be processed and resource_unloading may be left as true.
Moroever since driver will be unloaded, IPA_OPCODE_TX/RX_SUSPEND
interaction between Host and FW will not be necessary.
Fix is to disable IPA pipes directly when handling disconnection
if wlan driver unloading is in progress.
Change-Id: Ia4af1ab04052b1a9bab44105760de50ad6263dbb
CRs-Fixed: 2279044
Map all enter/exit log macros to enter/exit QDF TRACE macro
to provide option to compile out enter/exit logs if required.
Change-Id: I0c6cd633705e820fcfeb47e3f81a3522c9ef1974
CRs-Fixed: 2274850
Add support for action OUI extensions which can be used by station
to control mode of connection, connected AP's in-activity time and
Tx rate etc.,
Change-Id: Ie85e29c4b0ed7ac2815709d7a4e607c4ba46c6ca
CRs-Fixed: 2254502
Currently, errors are logged if a given offload feature is disabled
while suspending the wlan driver. Instead, simply return success for the
configuration of those features which are disabled, since nothing needs
to be done. This also has the side effect of avoiding meaningless error
logs for situations which are not error conditions.
Change-Id: I1d897d8db066e642e1cc6e77daff0f44172cefe8
CRs-Fixed: 2282040
Multicast address filtering only makes sense if the interface is
connected and capable of receiving traffic. Avoid enabling/disabling
the multicast address filter list on an interface that is disconnected.
Change-Id: Id8aff136e920bb726b8c7dd539d477ff44f080d4
CRs-Fixed: 2282003
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
ipa_is_fw_wdi_activated is invoked in the context of default 100ms
bus bandwidth calculation timer. Any logs will lead to excessive
messages and fix is to ratelimit these possible log messages.
Change-Id: I6e408187759bb6b6a5c511f2f88c2b14f4c889ab
CRs-Fixed: 2279024
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Enable the converged configuration component in the Kbuild. Also, hook
into the cfg parse and release APIs.
Change-Id: Id0df669a34463e9f51bd5cc5bf2939fb1ac6228d
CRs-Fixed: 2258233
There will be excessive logs in exception path when running SAP embedded
traffic since these logs are per packet.
Fix is to ratelimit all logs in IPA exception path to avoid excessive
logs.
Change-Id: Ia96a60f4de145740d7099b432c92e7b5785047d2
CRs-Fixed: 2272014
User can override the Listen Interval value set during association
by using wifi config set vendor command. Since there is no limit
check in host, a very high value causes an assert in the Firmware.
Add an upper limit check on the user Listen Interval value.
Change-Id: I8128ccbb875adf57c95a15d0391fb442d3dbbbc3
CRs-Fixed: 2256334
WLAN logs are excessively filled with
IPA logs when IPA performance level
is set.
Remove unnecessary logging in
hdd_ipa_set_perf_level().
Change-Id: I07563c1a6e98981e2b074bce7a969c9cbd94ec24
CRs-Fixed: 2268632
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: Icfcc28fb592ee99704d8fb23bc3cb45b6e4c9f53
CRs-Fixed: 2266718
The change id I50c357ca0f8ddfcc1a51ad4ed040961daf052459
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I33d83b5777ea259e29175e632a36e5fec3be24bc
CRs-Fixed: 2262351
Currently while going to suspend, dtim parameters are not
correctly getting configured. Some other parameters to config
like the inactivity timeout are completely skipped as well.
Cleanly port the setting of dtim and other parameters during
suspend and resume.
Change-Id: Ic41a8ace3f5650e53f2dcaa416bfe241b87aa88d
CRs-Fixed: 2248160
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the pmo component.
Change-Id: Ia23e1d0eed5a88b0cb1caf4feebd535d36ca2690
CRs-Fixed: 2261705
In case of rmmod if stop bss fails SAP IPA interface is not
deleted. So again at next driver load IPA will be holding the
stale IPA header and new IPA header will not be added at IPA
interface creation. In this change clean IPA interface when SAP
stop bss fails.
Change-Id: I3a1bf891752308ba1a29d6768f24880d8514d5bf
CRs-Fixed: 2224307
