During clock stop, Register for lpass wakeup only after
disabling the clock to avoid flooding of interrupts when
master is turned on for pending slave irq.
Change-Id: Ifbf604048d4972beb22b6286930193b83a2249e8
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
synchronize swr clock request using mutex and ensure
count becomes zero during ssr.
Change-Id: I3aa933a137d9439742d84fc23b37653da86f3b42
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Check if snd event client array is null before
dereferencing.
CRs-Fixed: 2328286
Change-Id: I4f7c2a1288ee27df51609e090cb2da2d33624a07
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Fix block pack mode parameter in wsa frame params to
to get proper frame allocation avoiding port collision
between DAC port and SMART BOOST port.
Change-Id: I3e552f189a67661d63a6cd0affc1cb233b53bda7
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
When SSR occurs master needs to restart even though clock
stop mode is supported. Add proper handling of master
during SSR and suspend.
Change-Id: I21c0ffd4fb741788dd12671fe4bd04cca9d7ff59
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
It is sometimes observed that afe could send multiple wakeup
events at a time. Avoid this by handling wakeup event only once
per swr suspend.
Change-Id: Ieb9ed1b18c8c93cb7db4b75e3411cc25838be492
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Slave could trigger multiple path control api multiple times
after connect/disconnect port. Avoid handling the api without
new connect/disconnect requests to reduce latency.
Change-Id: I4db52fdebfd6b7c0fe3f388f25dfaa4981d5f61c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Avoid reinitializing master when resuming from clock stop
to avoid possible slave sync lost.
Change-Id: I8b2403bf10c0ec2ab7b294d64441b4d9a8afcaa0
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Soundwire slave interrupt is only edge type, so any pending slave
side interrupts could not cause a new slave interrupt, if
they are triggered before clearing of existing interrupts.
Recursively trigger slave irq until there are no pending slave
interrupts to handle this issue.
Change-Id: I254f2467f09172490796114b48f1f0feb604ad17
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
ANDROID_BUILD_TOP variable is deprecated and thus all paths are
assumed to be relative to the top directory.
Change-Id: Ifc1bba67bf47092a37336581990d4bcce82a72f5
Add changes to support SSR in pinctrl lpi driver
based on snd event framework.
Change-Id: If4fb3085ab69ae04628ef10a8b528d0cdc20f40d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add changes to recover audio during SSR and PDR
in swr master controller driver.
Change-Id: Ibe3ae097b5f9d59b135d861c5f50f6bbc1c05af6
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add changes to call pm runtime calls only once for soundwire
master active, to be able to decrement and put to suspend
during SSR.
Change-Id: I068040e2a224d1ee97f472f69f25af77ae632be2
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
For MCLK frequency switching to 11.2896 for native
playback support, frameshape also needs to be changed
accordingly. Add changes to support frameshape switch
based on mclk frequency for given master.
Change-Id: I0c4dd69b743f83b45eeed73f27ad10e878b9244b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support to listen for DC detection event.
Shutdown WSA on receiving DC detection event.
Porting the changes from old master driver to new driver.
Change-Id: I4d323bb8074d447b2969dd01c7129e57160b6c04
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Fix noise issue with mono speaker by properly disabling
the previous port config.
Change-Id: I55fde87fcea5c8a7f05ff82a0d8967bc7688882b
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
When temperature on a single wsa881x device is being read,
then soundwire master wakes up both wsa881x devices but
regcache_sync is happening only for one wsa881x device on
which the temperature is being read. This results in
audio playback mute after temperature read. Fix the
regcache sync during temperature read and playback usecase.
Change-Id: Icee46d5105bb449f14855d33bdcb00cf5c77cb91
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add locking for soundwire fifo operation as same
function call can be used at a time by a different thread
like mbhc, and fix register definitions in header.
Add soundwire slave interrupt clear registers as part of
slave interrupt event in master interrupt handler.
Change-Id: I94d9b7ac09192dbf8aa3248d35956b380430ee0b
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support for SND event framework for helping with
notifications among different audio modules/drivers.
The SND event framework functions with a master/client
mechanism, where each client and the master register
with the framework, and then notifies its own status
(UP/DOWN). Each master will share a list of clients it
is interested in, and once all the clients are registered
and notified UP, the framework's state will be UP. On the
other hand, as and when any one of the client, or the master
reports its state as DOWN while the framework is UP, the
framework state would be changed to DOWN, and all clients
and the master would be let know about the change.
Change-Id: Ief6f26c5d5626c29246472ad71c247d71ee9e92f
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
When stereo playback start and temperature read
initiated at same time, one of speaker PA bits are
not set in particular race scenario. Handle the
broadcast check in soundwire framework to ensure
broadcast is disabled only when respective gr_sid
slave calls swr_remove_from_group.
Change-Id: I6f82a8c3c0f39dc20c1def09c1728ce4c26c2f5d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
When temperature on a single wsa881x device is being read,
then soundwire master wakes up both wsa881x devices but
regcache_sync is happening only for one wsa881x device on
which the temperature is being read. This results in
audio playback mute after temperature read. Fix the
regcache sync during temperature read and playback usecase.
Change-Id: I856b96517c629ac685bbc25caabee841037106c8
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add wcd937x swr slave and codec driver.
This adds only basic support for codec registration.
Change-Id: I87519a234f14d34a019c8f66652b7224759e639c
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Interrupts will be handled by slave driver. This
needs slave pointer to store virtual interrupt and
pass it as a parameter to handle_nested_irq.
Change-Id: I356102a04b4fda7e5863f809cd848d7a82b82f36
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update config file and make rules for msmsteppe
compilation.
Change-Id: I374a0725a7dd36edc9e04652fb07dc719310565c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>