Commit Graph

432 Commits

Author SHA1 Message Date
Steven Whitehouse
13538b8e46 [GFS2] Add list empty test to databuf_lo_add
Heinz had spotted that I'd forgotten to test in databuf_lo_add()
that the data buffer in question hadn't already been added to
the list. This was causing an infinite loop later on in the
"before commit" routine.

This means that GFS2 is now ready to be tested by everybody.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-22 11:15:03 +00:00
Steven Whitehouse
f55ab26a8f [GFS2] Use mutices rather than semaphores
As well as a number of minor bug fixes, this patch changes GFS
to use mutices rather than semaphores. This results in better
information in case there are any locking problems.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21 12:51:39 +00:00
Steven Whitehouse
5c4e9e0366 [GFS2] Fix a case where we didn't get unstuffing right
There was a bug in the unstuffing logic which caused a crash
under certain circumstances. This is now fixed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-15 12:26:19 +00:00
Steven Whitehouse
61a30dcb58 [GFS2] Fix for lock recursion problem for internal files
Two internal files which are read through the gfs2_internal_read()
routine were already locked when the routine was called and this
do not need locking at the redapages level.

This patch introduces a struct file which is used as a sentinal
so that readpage will only perform locking in the case that the
struct file passed to it is _not_ equal to this sentinal.

Since the comments in the generic kernel code indicate that the
struct file will never be used for anything other than passing
straight through to readpage(), this should be ok.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-15 10:15:18 +00:00
Steven Whitehouse
4dd651adbb [GFS2] Fix the bugs I introduced in the last patch but one
Various endianess changes required in the directory code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-14 15:56:44 +00:00
Steven Whitehouse
d1665e4142 [GFS2] Put back O_DIRECT support
This patch adds back O_DIRECT support with various caveats
attached:

 1. Journaled data can be read via O_DIRECT since its now the
    same on disk format as normal data files.
 2. Journaled data writes with O_DIRECT will be failed sliently
    back to normal writes (should we really do this I wonder or
    should we return an error instead?)
 3. Stuffed files will be failed back to normal buffered I/O
 4. All the usual corner cases (write beyond current end of file,
    write to an unallocated block) will also revert to normal buffered I/O.

The I/O path is slightly odd as reads arrive at the page cache layer
with the lock for the file already held, but writes arrive unlocked.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-14 11:54:42 +00:00
Steven Whitehouse
fc69d0d336 [GFS2] Change ondisk format (hopefully for the last time)
There were one or two fields in structures which didn't get changed
last time back to their gfs1 sizes and alignments. One or two constants
have also changed back to their original values which were missed the
first time.

Its possible that indirect pointer blocks might need to change. If
they don't we'll have to rewrite them all on upgrade due to a change
in the amount of padding that they use.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-13 16:21:47 +00:00
Steven Whitehouse
7359a19cc7 [GFS2] Fix for root inode ref count bug
Umount is now working correctly again. The bug was due to
not getting an extra ref count when mounting the fs. We
should have bumped it by two (once for the internal pointer
to the root inode from the super block and once for the
inode hanging off the dcache entry for root).

Also this patch tidys up the code dealing with looking up
and creating inodes. We now pass Linux inodes (with gfs2_inodes
attached) rather than the other way around and this reduces code
duplication in various places.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-13 12:27:43 +00:00
Steven Whitehouse
18ec7d5c3f [GFS2] Make journaled data files identical to normal files on disk
This is a very large patch, with a few still to be resolved issues
so you might want to check out the previous head of the tree since
this is known to be unstable. Fixes for the various bugs will be
forthcoming shortly.

This patch removes the special data format which has been used
up till now for journaled data files. Directories still retain the
old format so that they will remain on disk compatible with earlier
releases. As a result you can now do the following with journaled
data files:

 1) mmap them
 2) export them over NFS
 3) convert to/from normal files whenever you want to (the zero length
    restriction is gone)

In addition the level at which GFS' locking is done has changed for all
files (since they all now use the page cache) such that the locking is
done at the page cache level rather than the level of the fs operations.
This should mean that things like loopback mounts and other things which
touch the page cache directly should now work.

Current known issues:

 1. There is a lock mode inversion problem related to the resource
    group hold function which needs to be resolved.
 2. Any significant amount of I/O causes an oops with an offset of hex 320
    (NULL pointer dereference) which appears to be related to a journaled data
    buffer appearing on a list where it shouldn't be.
 3. Direct I/O writes are disabled for the time being (will reappear later)
 4. There is probably a deadlock between the page lock and GFS' locks under
    certain combinations of mmap and fs operation I/O.
 5. Issue relating to ref counting on internally used inodes causes a hang
    on umount (discovered before this patch, and not fixed by it)
 6. One part of the directory metadata is different from GFS1 and will need
    to be resolved before next release.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
Steven Whitehouse
257f9b4e97 [GFS2] Update truncate function (shrinking partial blocks)
Update the function in GFS2 which deals with truncation of
partial blocks. Some of the code is "borrowed" from ext3
since it appears to give a good model of how to do this
operation. The function is renamed gfs2_block_truncate_page
accordingly.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-31 10:00:25 +00:00
Steven Whitehouse
f42faf4fa4 [GFS2] Add gfs2_internal_read()
Add the new external read function. Its temporarily in jdata.c
even though the protoype is in ops_file.h - this will change
shortly. The current implementation will change to a page cache
one when that happens.

In order to effect the above changes, the various internal inodes
now have Linux inodes attached to them. We keep the references to
the Linux inodes, rather than the gfs2_inodes in the super block.

In order to get everything to work correctly I've had to reorder
the init sequence on mount (which I should probably have done
earlier when .gfs2_admin was made visible).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 18:34:10 +00:00
Steven Whitehouse
fd2ee6bb1e [GFS2] Remove unused prototype
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 13:36:53 +00:00
Steven Whitehouse
e13940ba56 [GFS2] Make dir.c independant of jdata.c
Copy & rename various jdata functions into dir.c. The plan
being that directory metadata format will not change although
the journalled data format for "normal" files will change.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 13:31:50 +00:00
Steven Whitehouse
9b124fbb8d [GFS2] Use mpage_readpage() in gfs2_readpage()
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 11:55:32 +00:00
Steven Whitehouse
2442a098be [GFS2] Bug fix relating to endian conversion in inode.c
A two line fix to get endian conversion correct.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 11:49:32 +00:00
Steven Whitehouse
4ff14670ee [GFS2] Rename get_block and make it extern
This renames get_block to gfs2_get_block and makes it accessible
from outside ops_address.c.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 09:39:10 +00:00
Steven Whitehouse
b381beadee [GFS2] Remove unused file resize.c
The code in this file is no longer used as the rindex file is
now accessible to userspace, so can be read/written directly.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 08:47:14 +00:00
Steven Whitehouse
aa6a85a971 [GFS2] Remove pointless argument relating to truncate
For some reason a function pointer was being passed through
the truncate code which only ever took one value. This removes
the function pointer and replaces it with a single call to
the function in question.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-24 10:37:06 +00:00
Steven Whitehouse
a98ab2204f [GFS2] Rename gfs2_meta_pin to gfs2_pin
Since we'll need to pin data if we are going to journal it, then
I'm renaming this function to make it less confusing. It might also
be worth moving it into lops.c since there are no users outside that
file.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 13:38:44 +00:00
Steven Whitehouse
4f3df04137 [GFS2] Change memory allocations to GFP_NOFS
I'd like to be rid of these memory allocations entirely so far as is
possible. For the moment though, mark them GFP_NOFS to make them less
harmful.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 13:20:16 +00:00
Steven Whitehouse
64fb4eb7d4 [GFS2] Remove gfs2_databuf in favour of gfs2_bufdata structure
Removing the gfs2_databuf structure and using gfs2_bufdata instead
is a step towards allowing journaling of data without requiring the
metadata header on each journaled block. The idea is to merge the
code paths for ordered data with that of journaled data, with the
log operations in lops.c tacking account of the different types of
buffers as they are presented to it. Largely the code path for
metadata will be similar too, but obviously through a different set
of log operations.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 13:14:40 +00:00
Steven Whitehouse
586dfdaaf3 [GFS2] Make the new argument to gfs2_trans_add_bh() actually do something
Passes the flag through to ensure that the correct log operations are
invoked when the flag is set.

Signed-off-by: Steven Whitehouse: <swhiteho@redhat.com>
2006-01-18 11:32:00 +00:00
Steven Whitehouse
d4e9c4c3bf [GFS2] Add an additional argument to gfs2_trans_add_bh()
This adds an extra argument to gfs2_trans_add_bh() to indicate whether the
bh being added to the transaction is metadata or data. Its currently unused
since all existing callers set it to 1 (metadata) but following patches will
make use of it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 11:19:28 +00:00
Steven Whitehouse
b96ca4fa4e [GFS2] Update init_dinode() to reduce stack usage
We no longer allocate a dinode on the stack in init_dinode()
and we no longer use gfs2_dinode_out (eliminating one copy) and
gfs2_meta_header_in (eliminating another copy). The meta_header_in
fucntion is now no longer referenced from outside gfs2_ondisk.c, so
make it static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 10:57:10 +00:00
Steven Whitehouse
3bd7662c4d [GFS2] Remove unused code from ondisk.c/gfs2_ondisk.h
Removal of unused conversion functions from ondisk.c and
gfs2_ondisk.h

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 10:40:17 +00:00
Steven Whitehouse
666a2c534c [GFS2] Remove unused code from various files
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 10:29:04 +00:00
David Teigland
c73530a1f9 [GFS2] Remove remains of the GFS2 identify ioctl()
We don't need this ioctl, we can use stat() to gain the same
information.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18 10:11:51 +00:00
David Teigland
5ddec5b3d7 [GFS2] Only two args for kobject_uevent() in locking/dlm/mount.c
Update the dlm interface module to take account of the recently
removed third argument to kobject_uevent()

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18 09:34:14 +00:00
David Teigland
869d81df53 [GFS2] An update of the GFS2 lock modules
This brings the lock modules uptodate and removes the stray
.mod.c file which accidently got included in the last check in.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-17 08:47:12 +00:00
David Teigland
a8f2d64728 [GFS2] Fix typo in GFS2 Makefile
A two line fix to the GFS2 Makefile.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-17 08:36:49 +00:00
David Teigland
29b7998d88 [GFS2] The lock modules for GFS2
This patch contains the pluggable locking modules
for GFS2.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:52:38 +00:00
David Teigland
b3b94faa5f [GFS2] The core of GFS2
This patch contains all the core files for GFS2.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00