Keep track of how many times supesend resume succeeds and fails
also mark last busy on a failed runtime suspend or a successful
runtime resume.
Change-Id: I04df805429e3a9ce91bc3d7f27bfd598396257c9
CRs-Fixed: 935300
HTT messages do not have a tx complete and should
have their runtime puts done when the firmware response
come. Tag messages without responses so that the
put can be done after issuing the message. Also do
runtime put in error case.
Change-Id: I7253ace95ca6bb4fa17bc6d82ec52fc598d17712
CRs-Fixed: 935300
Check runtime pm status while sending messages.
Update runtime pm when sending messages to hif.
Update runtime pm when messages are tx completed.
Change-Id: I27840f57ff87d6d27b1e3611e7fe1f2cd933ddd0
CRs-Fixed: 935300
HDD interfaces with the platform driver. Runtime suspend
is a callback registered with the platform driver. Coordinate
runtime suspend from hdd since it is both the logical entry point
and knows what other layers need to participate in a runtime suspend.
Change-Id: I80b71e504d0cd31bd5a8e47895db7e0bd233f6c3
CRs-Fixed: 935300
wma has to do some extra steps that were part of 802.11 suspend
for runtime suspend.
Change-Id: I91fbdcacd6c557f30e0d4f422324f2db67cb96dc
CRs-Fixed: 935300
hif runtime suspend resume is identical to a regular bus suspend
resume, but provide a different api just in case this changes.
Change-Id: If069df7733d6a1ebe38d356ac5bdd4e2a250118b
CRs-Fixed: 935300
Introduce an enum for use by multiple layers to suspend slightly
differently when doing a runtime suspend versus a system suspend.
Change-Id: I753bbe909e53558fe592defdca021331ec6feb88
CRs-Fixed: 935300
Runtime pm opperations will be initiated in hdd, so hdd
needs an api to updated the runtime_pm state.
Change-Id: I783fc136777a56d8ea23f8b11617ebe92641221a
CRs-Fixed: 935300
Send one suspend indication message to wma after configuring
all the offloads. Reduce context switches and complexity.
Change-Id: I020fc8864dbf7378805361d54dc6cff60b2652e5
CRs-Fixed: 935297
SME holds config item in tCsrConfigParams structure as well as some of
the same items in tSmeConfigParams which makes tCsrConfigParams super
set of tSmeConfigParams. There are high chances if somebody misses
copying item from tSmeConfigParams to tCsrConfigParams and that will
result in config item not being set correctly.
In order to make it clean and easy, merge both config structure in one.
Change-Id: I8c93d9fae0986cb90b4ed4c4712b1e2b023b4be3
CRs-Fixed: 963752
qcacld-2.0 to qcacld-3.0 propagation
Currently, if SAP supports 40Mhz, then it sends the supported
channel width as 40Mhz irrespective whether STA supports or not.
Changes done to check the STA capability for supported channel
width and send it accordingly in Assoc Resp
Change-Id: I58ca44b6998d4712521a10285b9fd2a3f825d2ed
CRs-Fixed: 728676
Signed-off-by: Krunal Soni <ksoni@qca.qualcomm.com>
WLAN_FEATURE_MBSSID flag is originally added to support MBSSID,
specifically for the MOBILE ROUTER build, and is now enabled for all
builds, there is no longer needed to have a separate feature flag,
so that removing it.
This commit cleans up the following modules - cds/mac/sap/sme.
Change-Id: I79ad9767b7945af0c567b6294ac07e7697898e9e
CRs-fixed: 958154
This is qcacld-2.0 to qcacld-3.0 propagation
Deactivate and clean up the logging thread during driver load failure and
ensure that logging thread is not enabled for FTM mode
CRs-Fixed: 961865
Change-Id: I53f85a30f52fc5715705624bf515ab5e4666db8e
This is qcacld-2.0 to qcacld-3.0 propagation
Avoid logging of all module logs into kmsg during the driver load
phase. All module log level is set much before setting of the
flag that indicates whether multicast logging is enabled or not.
Because of this all module log levels are getting printed for a
brief duration in kmsg during driver load. Fix the same by
setting the multicast flag appropriately so that when multicast
logging is enabled, all the logs are multicast to user space
and only the error and fatal messages continue to get logged in
the kmsg.
CRs-Fixed: 958705
Change-Id: I260e38ef64f704dfd9ca1ca4dc68c56428526559
qcacld-2.0 to qcacld-3.0 propogation
Previously trace logging levels are set from cfg.ini for different
modules which again over written by code. Ultimately code logging
preference was taking place.
After changes if the log level for any module is set to DEFAULT(0xffff)
then only code logging preference will be used else cfg.ini logging will be
preferred.
CRs-Fixed: 875973
Change-Id: Ia3df86908cec1d5c487d614a418721c0cd98fc52
Add new IOCTL 'CHANNEL_SWITCH' which is used to move the operating
channel of SAP/P2P-GO. This IOCTL is supported only for SAP/P2P-GO
and not for STA/P2P-GC.
E.g., format to issue command through wpa_supplicant:
DRIVER CHANNEL_SWITCH <CH> <BW>
- <CH> is channel number to move (1 for ch1, 149 for ch149 etc.)
- <BW> is bandwidth to move (20 for BW 20, 40 for BW 40 etc.)
Change-Id: Ie65f2ceb9ece04053ab32ee60f83fd09cd232f77
CRs-Fixed: 955368
Add support to include channel bandwidth as one of the inputs to
decide the channel switch parameters. Currently only the target channel
is used as the input to decide the channel switch parameters. With this
fix, user specified channel bandwidth is also taken into consideration.
Change-Id: Ic49b24edde6cabc52aa2b38110763da82da6790d
CRs-Fixed: 955368
Fix invalid operating class calculation while sending out channel switch
frames. The operating class is getting wrongly calculated using the
channel width instead of the channel offset. Fix this by calculating and
passing the channel offset parameter instead of the channel width to the
necessary function to ensure that the operating class gets calculated
correctly.
CRs-Fixed: 955414
Change-Id: I011db65e57c477e381fd471a4a930a02e2a7ee21
Remove the CB mode usage in channel bonding since the center
center frequency is calculated using channel width and channel
number.
Change-Id: Ie9685a833750bf3b69cce40c5d9587fb9b232047
CRs-Fixed: 962174
The current roam sync propagation for LFR3.0 in the host driver is
based on queuing and message processing mechanism. This can lead
to many unknown sequence of operations as there might be other
messages sitting in the queue which may interrupt with this
operation. Hence, it would be good to introduce a callback mechanism
which take care of running the code to execution completely in case
of roam synch propagation.
It also improves to reduce the roam delay by 50 percent as compared
to the existing mechanism.
CRs-Fixed: 962290
Change-Id: I4af569b1e3020a64beb606e8bbffd7613775138f
qcacld-2.0 to qcacld-3.0 propagation
During SSR, since VDEV detach won't happen, some contexts saved in VDEV
may not get a chance to be freed. Add change to check these contexts
in SSR shutdown routine to make sure they are freed.
Change-Id: I36d12b3bb524ca107ece2441c1dc1d80293cb31b
CRs-fixed: 957587
qcacld-2.0 to qcacld-3.0 propagation
Currently only one level of information (file name and line number of
the caller who wants to allocate memory) is saved when each memory is
allocated. This may not be able to provide enough information for some
cases that multiple levels of callers are the same. Hence save call stack
as well for each memory allocation in SLUB builds for debug purpose.
Change-Id: I245d53ec3805217ca34d7c1f5e31b84cac73e395
CRs-fixed: 930557
pRoamInfo is not initialized in cds_force_sap_on_scc function.
This is resulting in build failure when FEATURE_WLAN_FORCE_SAP_SCC
flag is enabled. Modify cds_force_sap_on_scc function to fix the same.
CRs-Fixed: 953618
Change-Id: I136d33f108dab19c236c7bf1aadf7608c0673baf
sched_scan_lock and connection_status_lock's are using spin lock
APIs directly from kernel. Change to use CDF APIs for spin lock.
Change-Id: I0f56624df34682150b402fc36b9dfdba36a598f3
CRs-fixed: 959287
If DBS hwmode is not available from FW, return accrodingly in
wma_get_hw_mode_from_idx.
Change-Id: I603edd8a49bfd584300dcfc21c2b3c8c4c3c1892
CRs-Fixed: 934012
wma_suspend_req is rewritten in changes
I020fc8864dbf7378805361d54dc6cff60b2652e5
and I95876979652ab16976f23561038c877cee4c930a
Revert "qcacld-3.0: Fix the PNO WoW is not configured in concurrency case"
This reverts commit 3bf7846a5ee12e0641f90b9ff05a80a068cde777.
Revert "qcacld-3.0: Cleanup WOW_NLO_SCAN_COMPLETE_EVENT"
This reverts commit 8098644b8cbf89f23442c5bef02f186460cd9f8f.
Revert "qcacld-3.0: Find extscan_in_progress irrespective of connected or pno"
This reverts commit 7bb7f564b75965bfbf09fef6b5406aaa19c245a7.
Change-Id: If0953ad7ca8d7224c87f026e77d1a3f256c4f124
CRs-Fixed: 935297
The api is clearer without the abreviation. The api is
cleaner without an unused cdf_handle. Also remove
unnecessary cdf_schedule_work api. cdf_create_work
is also cleaner without cdf_handle.
Change-Id: Id8c32596a92184d6768e2bc3210c308b44da2a57
CRs-Fixed: 935297
Hif needs to guarantee that it frees the buffers that it doesn't
pass to upper layers.
Change-Id: I816d0a1b19a5a0c00e9669c18dfdf427c102c911
CRs-Fixed: 958124
This flag supports depricated emulation hardware.
Remove conditionally compiled code and dummy functions
that become unused as a result.
Change-Id: Ie21df7e39b196109acfb6b41afc6b8c22fecb822
CRs-Fixed: 958120
On M2M emulation platform we have a fixed mapping between macs, hence
vdev transition & MCC support is not possible on this platform. But MPR
platform doesn't have these limitations. This config allows at runtime
enable/disable vdev transition & MCC support depending on the platform
it is running on.
Change-Id: I17a92dce695ee30f7994f040d4bc612a38680f3e
CRs-fixed: 922181
qcacld-2.0 to qcacld-3.0 propagation
If ADDTS response timer is fired because of not receiving ADDTS RSP
within time then this timer handler posts SIR_LIM_ADDTS_RSP_TIMEOUT
command to LIM. But if deferring is enabled(say due to processing any
action frame) then SIR_LIM_ADDTS_RSP_TIMEOUT command will be added to
defer queue and as gLimAddtsSent is set to TRUE, including this
command all other defer commands will never be processed. This may
lead to active command timeout.
Hence process SIR_LIM_ADDTS_RSP_TIMEOUT command in defer state.
Change-Id: I48f09a7fd560702ac7701e0a1a41c77ad94626d4
CRs-Fixed: 919490
Fix compilation issues on MSM8998 RUMI platform caused by
CONFIG_CNSS not being defined and un-initialized local variable usage.
Change-Id: Iaf8bec493a42ec9fd09e1b2b6aa085be8de4bc8a
CRs-Fixed: 959249
