With current code, as soon as change interface command comes to
convert interface type to AP, it removes p2p device adapter which
is not required. In new platform, various concurrencies are supported
which includes SAP+GO, SAP+STA+GO, and so on. To make these
concurrencies work properly, no longer remove the p2p device adapter
when SAP comes up.
Change-Id: Icb1729f25e0604e0c342a136d9b4cf332e50d7c8
CRs-Fixed: 953788
As per the requirement when IBSS connection co-exist with STA
connection and scan request is coming from STA adapter,
don't include those channels which fall in same band as IBSS
channel's band.
Change-Id: Ifb42ea6b463bd5020bf544eee504b9c3ceefcfc2
CRs-Fixed: 953788
Provide necessary code changes to support IBSS+SAP concurrency for
emulation platform only.
Change-Id: I76dc023bd48ee79ba706f5a7009b1d8462c6b712
CRs-Fixed: 953796
Make necessary changes to support IBSS+STA concurrency for SCC and
2G+5G MCC. Don't support intraband MCC due to known limitation
for this specific concurrency.
Change-Id: I325b5f51abeee3da0a75f90723c8b882f71dbef2
CRs-Fixed: 953788
During processing of rx mgmt frame, host try to get the
vdev using destination address but for BC frame it can't
find the vdev and iface too, so desired functionality will
not work.
As a part of this fix, host is getting vdev using bssid.
Change-Id: I52884faffc8c5fc8c2f9dcb4308e6f0739f80fe7
CRs-Fixed: 945583
Check for VHT caps in vendor specific IE only if the dot11mode
is set to 11ac or auto, so that the vht caps are included in
association reuest frame only if the dot11 mode is 11ac.
Change-Id: If72117e5a46a754ae602dabd596a2ad8aac33d2e
CRs-Fixed: 952134
Perform cfg download before the SME config update since the
SME config update operation accesses the cfg database.
Change-Id: Ic2d5b6d192ed164b20011b3eeaea6126951b87e8
CRs-Fixed: 948896
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Due to the large
number of changes required, this will have to be done in a phased
approach, with conversions occurring one source file at a time.
One potential problem that could occur, in the absence of any
protection, is that once a particular source file has been converted
to the unified set of logging APIs, someone could introduce new code,
either as a new feature or as a change propagation from qcacld-2.0,
which re-introduces invocations of legacy logging APIs. In order to
help prevent this, add conditional compilation to the hddLog() API so
that it will not be available to source files which have been
converted to the unified set of logging APIs. This will cause a
compilation error if hddLog() is called from source files which have
been converted.
Once all of the source files have been converted, the hddLog() macro
itself can be removed from the source code.
Change-Id: I5debb0eb9cd89c08fdfcc4fc117776160ed34501
CRs-Fixed: 949529
qcacld-2.0 to qcacld-3.0 propagation
When transmitting a packet in OCB mode, the station does not need to
be associated to an access point.
CRs-Fixed: 863620
Change-Id: I71b7ad6afa10321a7c7cde597a727bed7454f644
qcacld-2.0 to qcacld-3.0 propagation
Process TX frame only when STA state is in Connected state
otherwise drop the frame.
Change-Id: Id384bb4a11bc2783b8017a8b4fac67ba4f708cb5
CRs-Fixed: 778274
qcacld-2.0 to qcacld-3.0 propagation
Driver would get the tx rate info from firmware and converts it
to mcs index or legacy rate for userspace.
The problem here is when firmware creates a valid ratesets,
it includes all the subset of lower grade rates.
e.g
- VHT80 would include VHT80/VHT40/VHT20, VHT40 include VHT40/HT20
- HT40 would include HT40/HT20
- NSS2 would include NSS2 and NSS1
So that firmware would not only use one rateset, but would use all
other valid rates, the fix is to go through all other possibilities
to make sure the rate look up can find the correct mcs index.
Change-Id: I5df9059b73954951c4adec56002a3eba80915752
CRs-fixed: 936078
Clean up the hddLog API and CDF_MODULE_ID_HDD with CDS_TRACE
misused in CDS module.
Change-Id: I786fa1ba216b42a6218f7eadba60ee7e5e82ebe5
CRs-fixed: 948327
This is a qcacld-2.0 to qcacld-3.0 propagation.
Currently WOW wake up event is processed in work thread which may be
delayed to schedule. Directly complete the event in tasklet in order
to proceed it in time. Also make sure the WOW wake up event handler
is in atomic context.
Change-Id: Ie6015d39321c7759b35f05acc7833ef8974c0157
CRs-Fixed: 900629
Record CE interrupt in CE event history since the interrupts
may come separately for the different interrupts.
Change-Id: I269a103054d3ab2015d67370c43f4af598871b8d
CRs-Fixed: 951569
qcacld-2.0 to qcacld-3.0 propagation
Record when descriptors are posted to or completed by the copy engine
in SLUB_DEBUG builds.
Change-Id: I78ee028a7a61ffd253092cbb530ce9ec2e5022d3
CRs-Fixed: 938120
qcacld-2.0 to qcacld-3.0 propagation.
WMM should be enabled if HT caps are present even if WMM ie is
not present in beacons/probe response frames. In few places it
is not taken care. This commit will address the issue.
CRs-fixed: 873761
Change-Id: I985b7721fc28c9b7d087123c6cff9d76f93696d5
qcacld-2.0 to qcacld-3.0 propagation.
Send tdls mgmt frames with VI tid to give more priority
to tdls mgmt frames.
CRs-Fixed: 873749
Change-Id: I9196680f09678185c1010b472851c1aca00b1635
We already know kernel version is more than equal to 3.10.
So remove static checks for any previous kernel.
Change-Id: I4e17614fae47782a02dd528c7b4adf3d2802ec69
CRs-Fixed: 920681
qcacld-2.0 to qcacld-3.0 propagation
Fix incorrect completion of pending CONS RM request/release
notification, which is sent when receiving PROD RM notification
from IPA. Also cleanup pending CONS request flag when IPA resource
loading/unloading is compelted.
Change-Id: Ie37b7d21e1ad016dbaf9aa0f89c97402911b4a02
CRs-Fixed: 943635
qcacld-2.0 to qcacld-3.0 propagation
When IPA requests WLAN CONS resource while IPA resource loading is in
progress, resource will not be granted even after the loading is
completed. This will eventually result IPA uC timeout.
Change-Id: Iae8373c43709cbbccef790973642f5992ddcd359
CRs-Fixed: 943635
qcacld-2.0 to qcacld-3.0 propagation
Since CLIENT_CONNECT message is sent to IPA before enabling WDI pipes,
CLIENT_CONNECT message count could be more than CLIENT_DISCONNECT
count, and this could cause an abnormal behavior in the IPACM.
Change-Id: I03d30c7f82aadf83979084b7e65b8ed14565588d
CRs-fixed: 941894
Module_init waits for probe to complete after registering the
driver. But this is unnecessary and module load is intended for
loading the module but probe would be called when hardware is
ready. Remove the wait during module_init.
Change-Id: Ic2fe7efa78a1527acf1fd5b7689d70f6d450ccd3
CRs-fixed: 950170
In module init, bunch of initializations are done which are not
required till probe call back gets called. Also in module exit,
some clean-up done which should wait till remove call back gets
called. Move the initialization done in module init to probe call back and
clean-up done in module exit to remove call back.
Change-Id: Id4a0cb21300de1ceab8ed043638b735f31d516d4
CRs-fixed: 950170
For statically linked driver, con_mode is used for moving from
machine mode to FTM mode but it has conditional compilation
issues. Fix the conditional compilation to properly compile when
FTM feature is enabled.
Along with it, unify the usage of con_mode such that
curr_con_mode is the variable which holds the connection mode
passed as part of module parameter as well as set by the driver.
Change-Id: I7d6a5c9b82d1dbb727208caca78089d6be357e71
CRs-fixed: 950170
Move module init/exit related implementation together and at the
end of the file.
Change-Id: I17a02e4fdddc17fc3a725c29e89a52f5bd9d49b9
CRs-fixed: 950170
qcacld-2.0 to qcacld-3.0 propagation.
FW checks the peer Rx LDPC capability in ht and vht capabilities
to do Tx LPDC. But host sets the Tx LPDC flag in peer_flags.
To disable Tx LDPC reset the Rx LDPC capability in peer ht
and vht caps based on Tx LPDC configuration in INI.
Change-Id: I211fd73fd70a35faaf4cfc2c5dc8d842c7ff1e5a
CRs-Fixed: 894306
LFR3 to indicate the change in IP subnet to user space (supplicant).
This enables the DHCP refresh in case of IP subnet change during
roaming.
Change-Id: I9842a28461346fe97ab39f5a11ae504f2e32fa16
CRs-Fixed: 876335
Add handler for gateway parameter request vendor command. The
request is issued to update the gateway parameters to be used
during subnet detection post roaming.
Change-Id: I848f24b36a1d65a0e8bb8465b2b6f2016cb2224c
CRs-Fixed: 876335
Add LFR subnet detection support to protocol stack and
device access layers. In LFR3, the device may perform multiple
roams (may be across multiple IP subnets) without the knowledge
of wlan host. The LFR subnet detection feature enables the device
to regain IP connectivity if the firmware has roamed across the
subnets which otherwise is not possible without disconnect and
reconnect.
Change-Id: I60959af8b6ed330313a7f08f8aa1edfb63938bb8
CRs-Fixed: 876335
Add an INI item to configure LFR subnet detection feature.
LFR subnet detection is enabled by default.
Change-Id: Ifb4bba60dfcd0347137f4a690db50b0c453d1ae8
CRs-Fixed: 876335
At present and going forward ESE and ESE_UPLOAD will be the
de-facto approach of supporting ESE.
There is no support for #ifndef FEATURE_WLAN_ESE_UPLOAD block of code.
Hence clean up this code.
Change-Id: I1e1307ec3430353496b1cf7aaa2eb5291ca1d5b2
CRs-Fixed: 949634
Currently tx STBC param sent to FW is taken from peer's response frame, which
is wrong if current hardware does not support 2x2 for given channel width.
Update the driver to check number of tx stream for current vdev and clear txSTBC
if needed.
Change-Id: If05e5de72ba5af95b343817d811db0f413493ee1
CRs-Fixed: 941217
qcacld-2.0 to qcacld-3.0 propagation
Fix soft AP to not send Assoc response for Assoc req which is
unprotected and initiated by an injector rather than a testbed
station.
If STAUT sends duplicate Assoc request, Assoc response should
be sent only in case of non-PMF connection.
Change-Id: I6fb4c139af333c937e767cb111df4d1d69bddbd9
CRs-Fixed: 902969
qcacld-2.0 to qcacld-3.0 propagation
Add configuration option for mpdu density through INI. Update
the default value of mpdu density from 0 to 7.
Change-Id: Ib97869d4aec160065c945cd62876d6fd191d63a5
CRs-Fixed: 941182
qcacld-2.0 to qcacld-3.0 propagation.
Current TDLS default teardown interval does not work in
all the scenarios. Hence, change the default teadown
interval to 5 seconds and default TDLS idle packet
threshold to 3 to support all TDLS use cases.
Change-Id: Idf8b4cd02963d24350a1322ac4c7465fbfc7204f
CRs-Fixed: 936003
qcacld-2.0 to qcacld-3.0 propagation.
Add new TDLS mode for TDLS external control operation to
achieve power save on the target. Firmware will use this mode
to control timers precisely and save the power.
Add configuration "gTDLSPeerKickoutThreshold" to fine tune
TDLS peer sta kick out operation.
Change-Id: Ie941f93b54983ca6323ef4384a66e0807a56a7b1
CRs-Fixed: 929749
qcacld-2.0 to qcacld-3.0 propagation.
Firmware uses same notification interval to send trigger to the
driver for both TDLS setup and TDLS teardown operations. In ideal
scenario firmware needs to have an option to configure different
values for TDLS setup and TDLS tear down operations. This change
will enable firmware to have different values for setup and
teardown operations.
Change-Id: I300350c56d4ef23993953338529f29df2ea122a1
CRs-Fixed: 920835
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_green_ap.c to use the unified set of APIs.
Change-Id: If58683a833b1650a6cbea147debcead2551697da
CRs-Fixed: 937202
Propagation from qcacld-2.0 to qcacld-3.0
- WLAN firmware does not support get/set operations for power
gating VDEV parameters
- Remove support for power gating VDEV parameters from WLAN host
driver
Change-Id: I5b262b71364c11f648b579a8bdb6fa993ecb4a81
CRs-Fixed: 880180
qcacld-2.0 to qcacld-3.0 propagation
Sometime the thread sleeps in kzalloc for long time, resulting in
thread stuck.
This change prints time taken by kzalloc, if time taken is more
than 3 seconds.
Change-Id: I027ab2ad4e93f8a02ba9e48e47d7aa3123785a31
CRs-Fixed: 926479
qcacld-2.0 to qcacld-3.0 propagation
Too many log prints are seen by default if unhandled action frame
are received.
This change lowers the log level for unhandled Action frame logs.
Change-Id: I4af258eed12c2f352f97df0f73e9ab0c6278a437
CRs-Fixed: 924661
qcacld-2.0 to qcacld-3.0 propagation
If connect is received and queued to sme pending list while scan
is in progress in sme, once scan is completed, again scan is
queued to get the scanned channel info with reason
eCsrScanGetScanChnInfo behind connect command.
Connect is executed next with scan command in pending queue.
Now if disconnect is received from hdd it is also queued in sme
pending cmd list behind scan.
Once connect is executed the wait for key state is set and wait
key timer is started. As only disconnect and set key command are
allowed in wait for key state, the pending cmd queue is not
executed with scan command at the head and thus the disconnect is
not executed. Also as supplicant has issued disconnect, no keys
will be set and pending command queue will not be processed till
wait for key timer expires.
If during this time unload starts all the commands including the
disconnect command sme pending queue are flushed and thus no
DEL BSS is sent to firmware before HAL STOP which leads to crash.
To avoid this add disconnect to the head of sme pending command
list so that disconnect can be processed after connect during
wait for key state.
Change-Id: I333e7b103ac10e368d34b5bf8b87cc360650cd50
CRs-Fixed: 930713
Since management frames have been added to the wmi pipe,
the wmi pipe may fill up before the driver schedules the
tx completion processing.
Make tx completion processing use the DDR ce index to
avoid register access durring reaping.
Change-Id: I213aa0274d3c66e583bcdb700ced1133c2c30ebc
CRs-Fixed: 945831
Fix WMI command path Tx failure case:
1) Current WMI command path frees the packet with dummy completion when hif
fails to send the packet down. Fix it by putting back cmd to endpoint
Tx queue for retry.
2) Also separate WMI mgmt command/event log buffer from control path
command logs
Change-Id: Icc3f7fde10a592de3c5354ba720d6810ce1b635a
CRs-Fixed: 940100
Ignore HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND from firmware if
management over WMI is enabled.
Change-Id: Ic196d17526c251ae26dd59ca2f42b7bff9a46ffe
CRs-Fixed: 949946
Do not reserve tx descriptors for management packets
if management over WMI is enabled.
Change-Id: Iafe758d91d11f4875e3152d92538055784490a14
CRs-Fixed: 949917
Use list_for_each_entry_safe API to traverse list
while deleting list entry in cds_drop_rxpkt_by_staid
to avoid crash.
CRs-Fixed: 943767
Change-Id: I4d09fd88f0faefacfc886866d9045b09feeb4432
Remove per vdev tx descriptor pool feature as
it is applicable only for High Latency.
CRs-Fixed: 916724
Change-Id: I22ab3dd187518790694356bdde8475b194845bf5
a) Enabled flow control
b) Add small helper functions to avoid duplication of
code.
c) Fix thermal mitigation unpause issue with flow control.
CRs-Fixed: 916716
Change-Id: Ic02b66d1c23768a1c71dc08ed50dcedd02b647ce
This is a qcacld-2.0 to qcacld-3.0 propagation.
QCACLD firmware already addresses power concern during PNO scanning by
extending fast_scan_period, slow_scan_period and fast_scan_max_cycles
configuration which need to be set by the host driver.
Add the host driver support to do the same.
Description:
1. fast_scan_period: This is the fast PNO scan period. The scan interval time
sent down by the supplicant is assigned to this.
2. fast_scan_max_cycles: This parameter tells firmware to switch from
fast to slow scan period after this many number of fast_scan_periods
has elapsed.
3. slow_scan_period: This is slow PNO scan period with which scan happens
less frequently to save power. Once the FW switches from fast to slow period,
it remains in slow scan period until next PNO Start.
cfg.ini items:
1. Repurpose gPNOScanTimerRepeatValue to fast_scan_max_cycles.
2. Introduce new cfg.ini gPNOSlowScanMultiplier to act as multiplier of
fast_scan_period.
Change-Id: I453f09d42be3228ecc9c5023eca26eae1e589d6a
CRs-Fixed: 902381
qcacld-2.0 to qcacld-3.0 propagation
Add new RTT related wmi interface changes to support
TLV based messaging.
Change-Id: I0591907984c3c58039a06ce123dca777d24c590f
CRs-Fixed: 865207
Fix mangled APIs sme_configure_ext_wo_w,
sme_process_ready_to_ext_wo_w and
lim_remove_timeout_pbc_sessions which were introduced
while converting the names programmatically.
Change-Id: Ie0a79b476a99bf1be0411dae0542359e7d58141a
CRs-Fixed: 882962
qcacld-2.0 to qcacld-3.0 propagation
During SSR, Host is sending packets to firmware before WMI_READY_EVENT.
Fix is to avoid sending tx when logp_in_progress & clean ll-queue
packets in shutdown.
Change-Id: Ib6b9f4d51f2aa7f85d384831818b45763c702c88
CRs-Fixed: 834887
qcacld-2.0 to qcacld-3.0 propagation
Multicast packets using different sequence number space
gets dropped on the host due to the existing logic of
running duplicate detection check and out-of-order packet check
on all non-aggregation (legacy) TIDs, since f/w uses a
special (non-aggregation) TID (18) to indicate these packets
to the host, irrespective of sequence number space.
The fix is in 2 parts:
1) Do only duplicate detection on mcast packets & not out-of-order check
(Also do dup-detection only if retry bit is set)
2) Instead of using mcast TID indicated by f/w, use the actual
packet TID from the Rx descriptor to perform the duplicate detection
and use a separate (new) field in rx_reorder_array to store
the last successful mcast sequence number. On the next mcast packet
perform the duplicate detection against mcast sequence number, rather
than the ucast sequence number.
Change-Id: I4c3542e82a1917b4ed27513e9244702bb212df88
CRs-FIXED: 788954
qcacld-2.0 to qcacld-3.0 propagation
In Low-latency interface, to avoid 1d2 happening during roaming
test, host need to send HTC header to fw, by setting SendFlags
to zero to avoid deadlock situation.1d2 happened during roaming
test.
Change-Id: Ib3d16deadf038708fb75bcba692bd6adf3959c4e
CRs-Fixed: 807505
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Return value of memcmp function must be checked with NOT operation.
Change-Id: Ic866a70917c1e713855c28a8f156ffe7c381fa07
CRs-Fixed: 642070
qcacld-2.0 to qcacld-3.0 propagation
Current implementation defers all the received frames
when ADD TS request is sent out over the air. This,
in addition, to check for pMac->lim.gLimAddtsSent
incurs delay, till ADD TS response timeout, in processing
of the ADD TS response received if SET_LIM_PROCESS_DEFD_MESGS
is set to FALSE. As there is no rationale defer processing
of Rx frames while waiting for ADDTS response, changes are
made to not defer processing of RX frames for the same.
Change-Id: I1d1a41a0e3555ae19548a0cabf3b9569af775f72
CRs-Fixed: 839546
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Change-Id: Ifa30ed624c1f9f3c549def45cdb9e5f8ebfae233
CRs-Fixed: 627650
qcacld-2.0 to qcacld-3.0 propagation
This reverts Change-Id I858cd3cbd536ec189ea808c5d637abffe388f7aa.
With change id I858cd3cbd536ec189ea808c5d637abffe388f7aa,
host is not sending WMI_STA_UAPSD_AUTO_TRIG_CMDID command to firmware
during disable UAPSD per AC.
Change-Id: Ifdbcd6926ca86b1baeeadcf7a4720e460d41a6e5
CRs-Fixed: 911229
This is qcacld-2.0 to qcacld-3.0 propagation
Avoid invoking vfree inside spinlock during logging service
activation and deactivation. Since vfree is prone to sleep, this
disables the IRQs for duration longer than the acceptable limit.
vfree can be done without spin lock here, as there is no
synchronization issue in this scenario.
CRs-Fixed: 914363
Change-Id: I4d69431a98a4e4301dfc1e2b3b4c40c408a7ef99
For OEM to do OTA tests, power save, background scan, and low RSSI
scanning need to be disabled and it should be done dynamically.
Implement a vendor command to enable and disable OTA test mode.
CRs-fixed: 941776
Change-Id: Ic9da11cf5f4bb19a01d9b55c50c0aea196abbfb6
In P2P GO + GO concurrency case, only DBS mode is supported for
the two interfaces. Second P2P GO interface startup is blocked
if its channel is on the same band as the first P2P GO interface.
Change-Id: Ic85bd8f92983c8c08f61fdaf09be1ad13a17cd8f
CRs-fixed: 945804
qcacld-2.0 to qcacld-3.0 propagation
Default value of Tx beamformee is 0.
As as part of fix, enable the default value
of Tx beamformee.
Change-Id: Ib4b30f2a925e95cd96cc789ac7bc223274fa6a67
CRs-Fixed: 921834
qcacld-2.0 to qcacld-3.0 propagation
Currently tpAniSirGlobal pnoOffload value is initialized with
FW caps first time only and resetting to 0 while starting a bss in
go mode. Existing value of pnoOffload is not retained while
getting config for tSmeConfigParams.
Added changes to retain current value of pnoOffload from
tpAniSirGlobal while getting config for new tSmeConfigParams.
Change-Id: I0eda12ec1c69aeca4465d41f3e3ba96b8e1944cb
CRs-Fixed: 913994
qcacld-2.0 to qcacld-3.0 propagation
Add support to parse operating class from xcsa frame and select
channel bandwidth on basis of new operating class.
Change-Id: I33d794e77220ef82cca793767d459979eb940669
CRs-Fixed: 942104
qcacld-2.0 to qcacld-3.0 propagation
Currently there are many LL stats related logs
which doesn't provide any useful information.
As a part of fix, remove all those redundant logs.
Change-Id: Id1a89f209cfb57646828c5ee059f6f3790aac1c0
CRs-Fixed: 903941
qcacld-2.0 to qcacld-3.0 propagation
In Stop Adapter IBSS mode is not handled properly and
no DEL BSS is sent for the connected IBSS before DEL SELF STA.
This may lead to crash in FW.
As part of fix handle the IBSS mode and send DEL BSS if IBSS is
connected.
Change-Id: Ice1304aced1a158c7b589a95337412cda0183a04
CRs-Fixed: 908990
qcacld-2.0 to qcacld-3.0 propagation
If deauth is received just after Assoc rsp from AP in addSTA
response Re/assoc confirm is sent with status failure.
But protStatusCode in assoc confirm is not updated and thus the
pRoamInfo->reasonCode may have garbage value.
In case of Wep connection failure reason code,
pRoamInfo->reasonCode, is sent to the supplicant in connect
result. Now if pRoamInfo->reasonCode is 0 supplicant receives
connection success though connection have actually failed.
To avoid this update protStatusCode, before sending Re/assoc
failure.
Also properly derive if connection is WEP from roamProfile before
clearing it.
CRs-Fixed: 926572
Change-Id: I5ae0832d37746be16696f521bddd5b67307b1ee4
wdi20 enable implementation for hsoffload. Large physical address
support and wdi20 interface propagate to IPA.
part of HDD and CDS
Change-Id: Iaccab3ae233e0b9a8e4942bee0ebaa40ce94fc16
CRs-fixed: 941041
wdi20 enable implementation for hsoffload. Large physical address
support and wdi20 interface propagate to IPA.
This is part of HIF and DP.
Change-Id: If898f03a8a75689c98c70d1e55910f476d8fe329
CRs-fixed: 941041
qcacld-2.0 to qcacld-3.0 propagation
IPA pending_event list keeps IPA events arrived while IPA resource
loading/unloading.
This list is freed only when TX/Rx resume/suspend OP code from FW.
This change is to limit the pending event list size and free up the
pending event list when WLAN driver is unloaded.
Change-Id: Id0489a59bd3c2b04d2faba1069df7b2244a2a730
CRs-Fixed: 937765
qcacld-2.0 to qcacld-3.0 propagation
In the case of SAP + STA mode we fail to enable PNO on the STA interface,
and as a result the PNO feature will fail to find a network and wake the
host. Fix this by making sure PNO is configured in all appropriate
concurrency cases.
Change-Id: I97084cfde73025f0d09b60616959c9530ba82c80
CRs-fixed: 921150
qcacld-2.0 to qcacld-3.0 propagation
While processing GET STATES IOCTL, in a while loop, HOST prints PE, LIM
and MLM states of each session. Normally while loading, HOST allocates
memory for five sessions, but while processing this IOCTL, it iterating
in a loop assuming there are 255 sessions allocated, leading to crash
because of invalid memory access.
Hence while printing PE, LIM and MLM states iterate only for allocated
number of sessions.
Change-Id: I29c9a627615a1983d23831578f45aefe116dac25
CRs-Fixed: 879950
qcacld-2.0 to qcacld-3.0 propagation
Add support in driver for a new vendor command to get
the link properties nss, rate flags and operating
frequency.
Change-Id: Ie3b8d5b2c3886055d303441c5d8b2f2a0a2719bd
CRs-Fixed: 834199
qcacld-2.0 to qcacld-3.0 propagation
PE generated disassoc request is not serialized in SME queue. This
results in corrupting 'lim.limDisassocDeauthCnfReq.pMlmDisassocReq'
which is a global context to save disassoc request.
Address the above by indicating all the PE generated disassoc requests
to SME and process disconnection request only after receiving
eWNI_SME_DISASSOC_CNF from SME(similar to that of processing disassoc
request from peer).
Change-Id: I2b93925ba64c4d9ff22b071dd2e5c7681be59e15
CRs-Fixed: 934183
qcacld-2.0 to qcacld-3.0 propagation
Honor NL80211_SCAN_FLAG_FLUSH scan flag by flushing
sme and lim scan cache entries.
Change-Id: I1ff59e583f815bfec2df458c58a40b30b7bffa00
CRs-Fixed: 934979
Currently as part of application triggered channel switch both the
channel bandwith and bonding mode are limited to 20MHz.
Change made to properly update the channel width and bonding
parameters.
Change-Id: I48297eed74c9e3bfed6fefa67f664f3503fac1f6
CRs-Fixed: 944647
qcacld-2.0 to qcacld-3.0 propagation.
Too many log prints are seen if mtrace are dumped and this cause
WD bark.
To avoid this lower the log level of mtrace to Info.
Change-Id: I05d3fa8b3494785a1933f159280b6c9ba6923c0d
CRs-Fixed: 926416
Propagation from qcacld-2.0 to qcacld-3.0
Added sanity checks for below variable before accessing in the
driver exit path.
nl_srv_sock
pdev_txrx_ctx
Change-Id: I793db21e1a6d1eded027ecbd2805494ea7610852
CRs-Fixed: 846457
qcacld-2.0 to qcacld-3.0 propagation
Create a configuration item to program the first bucket
threshold of the scan results to have the flexibility to
adjust the first bucket threshold.
CRs-Fixed: 922979
Change-Id: I6fad27a2990f7555173e4735131e8392d0277009
1) Check for bssid if it is NULL, before dereferencing it.
2) Check for hal_ctx if it is NULL, before dereferencing it.
CRs-Fixed: 940721
Change-Id: I836416a4717b15902e8b8f27fa2e5e5e7935c12f
Target_lock was a global lock for all target and copy engine data
structure access. Replacing target_lock with a per copy engine
lock permits paralel completion handling for different copy engines.
Change-Id: I9c09d557c85f9e48beafe5e3f936e105183ddd3f
CRs-Fixed: 941355
This is called by the platform driver in case of kernel panic.
Replacement syncronization might be needed here if the kernel
panic doesn't stop the other host cpus before the platform driver
calls this.
Change-Id: Ic6d4eb1cb08f6363029463994ec7e3837212e271
CRs-Fixed: 941355
If watermarks are going to be used, the should be set as part of a
single threaded initialization sequence.
Change-Id: I3e1e9cd0f55f46d9f46718c139963931311fe8ae
CRs-Fixed: 941355
No other thread should modify the copy engine indexes while we
are cleaning up the data structures.
Change-Id: I324286c3a8eed24ddd94aa868dbaac425cc30dbf
CRs-Fixed: 941355
Remove ce_disable_any_copy_compl_intr and
ce_enable_any_copy_compl_intr since they aren't
used and give a false sense of thread safety.
Modifying copy complete interrupt currently needs
to be synchronized with completion handling.
Change-Id: Ieb27a8c71363ebd56f16eda9e1037a161a5eeb62
CRs-Fixed: 941355
Send and recv callback registration currently occurs durring init
and after bmi download is complete. In either case no transactions
are in progress and no race condition can exist.
Similarly watermark callback registration would happen at the same time
if it were used.
Change-Id: Ia77bf30fb3bcefa500465cea9ad9927990bb7ced
CRs-Fixed: 941355
Download length should be set before messages are recieved, so
no race condition should exist.
Change-Id: I92de4b3c4077f23032df45ceca6e169616351b8b
CRs-Fixed: 941355
FW is asserted, dont service the messages. The hif completion
thread used to prevent processing of messages when firmware crashed.
Change-Id: I42a5a285056e989d302e766f2922bb7c114634dc
CRs-Fixed: 941358
ce_enable_msi should happen before interupts are enabled. Therefore
we should be single threaded here and don't need to protect access
with a spin lock.
Change-Id: I24feec02003bdb402201d71d1cd5254dacae0b72
CRs-Fixed: 941355
ce_init should happen before interupts are enabled. Therefore
we should be single threaded here and don't need to protect access
with a spin lock.
Change-Id: I5e1cfd32860eeda8a403744cf1589e35c57ee6df
CRs-Fixed: 941355
We want to process the completions in parallel.
Upper layer should take care of its own thread safety.
hif_completion_thread is a legacy function that does in
context serialization of hif completions. Bypass it.
Change-Id: I7953545b55dae093931741359bbf985e2fb9faca
CRs-Fixed: 941358
This patch enables gEnableTxSUBeamformer by default in config ini
which will help to uncover some of the bugs in default DEV testing.
Change-Id: Ib64d53d307aced8f5384d691a3d7f4b383d52a0f
CRs-Fixed: 930322
This is qcacld-2.0 to qcacld-3.0 propagation
Currently in SAP mode, if max STA connected a operation to turn off
SAP will result in more than SME queue length cmds being enqueued.
To fix, this patch:
1) Makes the SME cmd queue length, 3 times the max STA.
2) Because of increased SME cmds, the allocation for all cmds
together will fail, hence allocate each SME cmd individually
and free them accordingly.
Change-Id: Ia1dfc5b00eacd9bdb503ce18927c62f1edd15320
CRs-Fixed: 928840
This is qcacld-2.0 to qcacld-3.0 propagation
Currently driver drops the action frame category 18 - FST action frames.
This patch adds support for these frames in wlan host code.
Change-Id: I7021e328b7ebe9a1e46f526e3928c7d1279e1ad7
CRs-Fixed: 921117
This is qcacld-2.0 to qcacld-3.0 propagation
When STA is connected to 160MHz AP, channel width is updated to
20MHz since the 160MHz channel width is not handled.
Add support to handle the 160MHz BW in beacon IEs.
Change-Id: Id13164762d6da142093f049121440ce976cecfc1
CRs-Fixed: 924219
qcacld-2.0 to qcacld-3.0 propagation
As part of cleaning up pending action frame, if timeout happens
for tx cnf event then indicate tx failure status as FAIL and free
cfgState->buf to avoid memory leak.
Change-Id: I6caaa8efeab769cce8c4cdfcc868101e63fd8e76
CRs-Fixed: 880779
qcacld-2.0 to qcacld-3.0 propagation
Channel bonding mode in not valid for channel 14. So don't
consider it while deriving the channel bonding mode.
Change-Id: I7ceae149cdd9e2f3c75f937c56cc5e93455fa8ee
CRs-Fixed: 908439
qcacld-2.0 to qcacld-3.0 propagation
On receiving channel switch announcement from AP delete all TDLS
peers before leaving BSS and proceed for channel switch.
Change-Id: I898f501d9d0afbbfef3a553ed63b52da5cd8f978
CRs-Fixed: 914129
qcacld-2.0 to qcacld-3.0 propagation
Few STA/P2P-client's are sending assoc req frame and waiting for
300-500ms. If they don't receive the assoc resp frame within
this time then they resending the assoc req frame. These frames
are not going to have retry bit set.
In the current design host driver is not handling these duplicate
assoc req frames without retry bit set.
To mitigate this issue, while processing assoc request frame,
if pStaDs entry already exists then send assoc response with
same tid and stop processing the assoc req further.
Change-Id: I6d67f4cd352bbee422301b832742e7386666037f
CRs-Fixed: 868736
qcacld-2.0 to qcacld-3.0 propagation
TX flow control timer initialized when STATION interface is created.
During IBSS startup, STATION interface is changed to ADHOC type.
TX flow control timer is not required, so close tx flow control
and destroy timer.
Change-Id: Id9c440638964fb3ab0e95d8a7c747708886a94ff
CRs-Fixed: 882821
qcacld-2.0 to qcacld-3.0 propagation
1.Provide off channel and operating class info to user space
in HAL API wifi_get_tdls_status. If off channel is not enabled
then provide base channel info and in that case pass opclass as 0.
2.Provide correct tdls state based on tdls off channel
configuration.
Change-Id: Ic60500b95ebddcb88b4e03f29178068c5322b2b9
CRs-Fixed: 838167
qcacld-2.0 to qcacld-3.0 propagation
When disassoc request is received from peer and at the same time
if deauth request is received from supplicant, LIM cleanup
may not happen properly as there is a chance of session deletion
in limSendSmeDeauthNtf while cleanup in progress from
limProcessSmeDisassocCnf. This can result in not sending delbss to FW.
Hence, FW can crash when config bss is sent for new connection.
Following changes are added to handle this.
1. Add state eLIM_SME_WT_DISASSOC_STATE in __limProcessSmeDeauthReq
and allow host to post LIM_MLM_DEAUTH_REQ instead of invoking
limSendSmeDeauthNtf, where session is deleted.
2. Send eWNI_SME_DEAUTH_RSP if cleanup is already in progress to avoid
cleanup again. If mlm state is not eLIM_MLM_LINK_ESTABLISHED_STATE,
then it means cleanup is already in progress.
3. Return from __limProcessSmeDisassocCnf if cleanup is already in
progress.
4. Add check in limProcessMlmDeauthCnf to send deauth confirmation even
if state is eLIM_SME_WT_DISASSOC_STATE.
5. Add similar checks in limProcessMlmDisassocReqNtf to handle disassoc
from peer and supplicant simultaneously.
Change-Id: Ie19a7b79d835a5e5a77ef48f9379c1cf90dc38d7
CRs-Fixed: 878334
This is a qcacld-2.0 to qcacld-3.0 propagation.
The problem with the current code is we are finding whether connected or
pno_in_progress or extscan_in_progress in the same for loop and whenever
one of them matches, we break out of loop. It makes sense to keep
connected flag and pno_in_progress inside the for loop because both are
mutually exclusive. But same is not the case with extscan_in_progress,
this flag can be set to true or false irrespective of connected or
pno_in_progress.
Hence the fix is to move finding extscan_in_progress to a separate for loop.
Change-Id: Ie72ff7f7382adaea5626c0808a206d18c2916e0d
CRs-Fixed: 899322
This is a qcacld-2.0 to qcacld-3.0 propagation.
Currently WOW_NLO_SCAN_COMPLETE_EVENT is enabled on receiving
PNO match found event, but it is never cleared.
This is causing regular host wake ups with the reason
WOW_REASON_NLO_SCAN_COMPLETE even if pno match is not found in the
next successive iterations.
Fix this by enabling/disabling WOW_NLO_SCAN_COMPLETE_EVENT before suspend
based on the flag pno match is found.
Change-Id: I21d73de0c03e0c09b5a91a521d848e71eaf359e0
CRs-Fixed: 888964
This is a qcacld-2.0 to qcacld-3.0 propagation.
With RunTime PM feature enabled, after receiving the PNO matched event
RunTime PM puts the host back in WoW suspend after 500ms (default).
Since WMI_NLO_SCAN_COMPLETE_EVENTID is not a wakeable event, this event
does not wakeup the host hence PNO scan not completed and PNO is broken.
Fix this by making NLO_SCAN_COMPLETE_EVENT a wakeable event.
Host driver configures this WoW event only after PNO match is received.
Change-Id: I81cccc86942fc75bc63235038c50ba6edb0fee8b
CRs-Fixed: 884211
This is a qcacld-2.0 to qcacld-3.0 propagation.
1. Add log to print ssid, bssid, rssi, channel and country code
while connecting to an AP.
2. Add log to print disconnect reason when disconnect request is
received from user space.
3. Cleanup some of the logs moving it to appropriate log level
which are showing up as ERROR level in bug report.
Change-Id: Id8ea69a14a18565c226f89a8a5e10be46741d76d
CRs-Fixed: 914336
This is a qcacld-2.0 to qcacld-3.0 propagation.
Increase the maximum config ini items from 512 to 1024.
Change-Id: I5c4958d5c743f1e0b03a4f7b41e21ff9787ccd07
CRs-Fixed: 914336
Propagation from qcacld-2.0 to qcacld-3.0
- Current AGC registers dump logic is not correct and its not
reading correct target registers
- Add correct AGC register read recipe to read correct AGC data
- Wake up SoC before reading any target register
Change-Id: I38016f91bf3d124e93e304522058e97daa711f4a
CRs-Fixed: 911554
Propagation from qcacld-2.0 to qcacld-3.0
- FW asserts after receiving P2P NOA parameter in non P2P GO mode
- Add P2P GO mode check in set NOA IOCTL and do not allow this command
in non P2P GO modes
Change-Id: Ie786dcf33fc50eacadb407d74ae5638da68cf0d2
CRs-Fixed: 919889
Restore the support for service ready extended
event since the required FW support is in place.
Without the service ready extended event, the
FW mode configuration and scan mode
configuration in the driver would be initialized
to zero i.e., all the dual mac features would
be disabled. Otherwise, the default values of
these two params would be set based on the
default values present in this extended event,
which is set by the FW.
CRs-Fixed: 923182
Change-Id: I31aa6420f3076f61008a809fe134b99f9b0dbc08
Sme is stuck due to scan active list mutex lock.
Release the sme scan active list lock if the
active list is empty.
Change-Id: Id05c642fe6fad30e40efa18a213158c331b5a502
CRs-Fixed: 943583
qcacld-2.0 to qcacld-3.0 propagation
Add supported class IE in beacon and probe response frames.
Change-Id: Ife4cb1b3db0119a9472cad0f861887c487b147d3
CRs-Fixed: 941466
qcacld-2.0 to qcacld-3.0 propagation
dfs_radar_found variable will be accessed in different context
so protect the same with mutex lock and synchronize the channel
switch triggered by application and dfs module.
Change-Id: I724d22cde9a77c187a17dffef13a9b4c9b2c27da
CRs-Fixed: 809527
qcacld-2.0 to qcacld-3.0 propagation.
1)Validate channel switch w.r.t concurrency rules set and switch
channel only if there is no channel interference.
2)Disable channel bonding in 2.4Ghz on switching channel to 2.4Ghz band
to avoid violating OBSS feature.
Change-Id: I81992b2c2876a32eba52010e72c4300608067e58
CRs-Fixed: 809527
qcacld-2.0 to qcacld-3.0 propagation
Add extra check for tqe->next!= NULL, to assert in only error scenario
Change-Id: I12e8ca5d5133ee0480d9c7c7c208854630272c89
CRs-Fixed: 839312
When allocate HTT descriptor, instead of allocating
large single chunk of memory, allocate small sized multiple
chunk of memory. Then not need to allocate order 5 memory.
Will have less chance to have memory alloc fail problem.
HTT descriptor. Frag descriptor. OL descriptor. TSO descriptor
Change-Id: Ib9d4a3f10adbc0656e1418cf3a67429322bb7164
CRs-fixed: 845666
qcacld-2.0 to qcacld-3.0 propagation
HTC RX event wait semaphore waiting event infinte.
Infinte waiting will hang device and cannot getting out from
system hang. To collect FW RAM dump and make correct panic,
semaphore should be replaced with time limitted compeletion
Change-Id: Idabfc7916676c9e986e953b50108653a5b394278
CRs-fixed: 924387
qcacld-2.0 to qcacld-3.0 propagation
Currently while populating ext rate set, local rate array
has size as 8.But max 12 ext rates can be copied in this
local rate array.If it is greater than 8, then it leads
to crash.
To resolve this issue, increase the local rate array from
8 to 12.
Change-Id: I2097cc4feb7fa669a970de5463130bb4bbf6401c
CRs-Fixed: 903816
qcacld-2.0 to qcacld-3.0 propagation
Currently if STA is very near to connected AP, it sends the
positive value of RSSI to framework. Framework checks this RSSI
and if positive(greater than 0) then it consider RSSI as -127dbm
which may lead to disconnection.
So changes are done to avoid sending the positive RSSI value
greater than 0.
Change-Id: Ib417f48345e3f78dba54d68969fa15d294f313b9
CRs-Fixed: 842243
qcacld-2.0 to qcacld-3.0 propagation
Currently if sta is connected to an AP
which only supports 11b, lim doesn't send
addTspec request to that AP. Specs doesn't
restrict Tspec in 11b. As a part of fix,
allow addTspec in 11b.
CRs-Fixed: 847755
Change-Id: I57c2d5139f9861140ab3bbe8314a1a3fe3e80e19
Some of these are very remote scenarios (like HIF not being
initialized at the time of the calls, which could then
dereference a NULL pointer). There are a few cases of looping
beyond boundaries.
The scope of this update is limited to NAPI related code.
Change-Id: I60229406d5ab514d5465ef2569324d3d4eb430d4
CRs-Fixed: 938253
Fix the channel width of type 'enum hw_mode_bandwidth' getting
wrongly assigned to enum of type 'tSirWifiChannelWidth'. The
tag values of each of these enums are different.
CRs-Fixed: 942090
Change-Id: Ic3610e6fcb7c89f0aeed829b83869169f4596ce8
This change Adds 11w offload feature, This change includes:
1. SA Query time out Kickout reason handling
2. Add a new service bit map for 11w offload and cache it to pMAc
3. Error logging in following unexpected case
a) Unprotected deauth / diasssoc from peer AP,
b) reception of SA query action frame in SAP / STA vde mode
4. Configure sta sa query related parameters as a part of
sta vdev attach
5. Trim mmie for pmf bcast/mcast mgmt frames
Change-Id: If119e9a79185552e163834f7c6c3a14288fe2761
CRs-Fixed: 931630
qcacld-2.0 to qcacld-3.0 propagation
Make changes to invoke wlan_hdd_cfg80211_connect_start() one time instead
of two instances of invoking the same function using local variables.
Change-Id: I2aba87645296414f340c89b6bd2f556b05f05115
CRs-Fixed: 898565
qcacld-2.0 to qcacld-3.0 propagation
If IOCTLs or CFG callbacks are issued continuously during driver
load/unload or during SSR, observing stability issues because of
excessive logging.
Hence move log level to INFO from ERROR in wlan_hdd_validate_context
function and don't print return status in its caller functions.
Change-Id: I8fd9b25e0c774e1e12b01128eb86783c9dec2ab7
CRs-Fixed: 800631
qcacld-2.0 to qcacld-3.0 propagation
Currently DS param IE is not present in probe req frames.
Set bit11 in scan_ctrl_flags to add DS param IE in probe req.
Change-Id: I57f79bd6dc5bd452987cb7d09cafa425ea2bbff4
CRs-Fixed: 905421
qcacld-2.0 to qcacld-3.0 propagation
Currently, MTRACE logs are not captured for few cfg80211_ops callbacks
and SME functions. Add missing MTRACE logs in cfg80211_ops callbacks
before calling SME function and also in few SME functions.
Change-Id: Iced4b80de60f9640cad0342afac57f9a17c2a3e2
CRs-Fixed: 859961
qcacld-2.0 to qcacld-3.0 propagation
Validation of pAdapter done in starting of hdd_smeRoamCallback().
Remove redundant pAdapter validation under flag eCSR_ROAM_SESSION_OPENED.
Change-Id: I1619bc929e484a60a930779a2acae071a710453a
CRs-Fixed: 898391
qcacld-2.0 to qcacld-3.0 propagation
If user change the BSSID/SSID and restart the IBSS network, during
IBSS leave the driver deletes only the 1st peer and all other
entries are not deleted. Now when the IBSS restarts and try to
register a sta with the staID which is already present in the
stale entries, the registeration fails and thus the BSSID values
in TL are not updated for all these stale peers. Due to this the
data to these peers uses the old BSSID.
This change take care of Deregistering all the active IBSS peers
during IBSS leave.
Change-Id: Id1ce0ffd880b8c2c8afd46414a59ba7bb87d5b6f
CRs-Fixed: 841565
qcacld-2.0 to qcacld-3.0 propagation
During create peer, 'delete peer' print is coming from
ol_txrx_peer_find_add_id(). Peer deletion is not happened when
ol_txrx_peer_find_add_id() calls ol_txrx_peer_unref_delete().
Actual peer deletion is happening in ol_rx_peer_unmap_handler().
So, remove 'delete peer' print in ol_txrx_peer_find_add_id().
Change-Id: If37a573f6ff734743c3901b96c7134c81b35e4c7
CRs-Fixed: 902463
Propagation from qcacld-2.0 to qcacld-3.0
Do not take single lock to free all TLSHIM packets
to avoid watchdog bark during driver unload.
CRs-Fixed: 934555
Change-Id: Iebfb449bd8174bc27207d33073c84a8f11d6e490
qcacld-2.0 to qcacld-3.0 propagation
When AP is configured with MCS index less than 4(43Mbps) then Host
reports invalid MCS Index to upper-layer, leading to display invalid
link speed on GUI.
Updating MCS index with valid value and thereby updating correct MCS
index to upper-layer
Change-Id: Ibd1503be3825c879b7fa52bdfb6ff07423c39023
CRs-Fixed: 855022
qcacld-2.0 to qcacld-3.0 propagation
While allocating memory if zero is passed as argument then kernel will
return address ZERO_SIZE_PTR(0x10) leading to pass NULL check, which is
usually done after every memory allocation. Hence when zero is passed to
allocate memory then return NULL without calling kmalloc.
While initializing neighbor roam data structure, don't allocate memory
if neighbor roam channel list is empty.
Change-Id: I50bdb99a0cd8ccbc2d764b8ac21f66bba8a8fdc4
CRs-Fixed: 815664
qcacld-2.0 to qcacld-3.0 propagation
Kernel assumes all SET IOCTL commands are assigned with even
numbers. But in our WLAN driver, some SET IOCTLS are assigned with
odd numbers. This leads kernel fail to check, for some SET IOCTLs,
whether user has the right permission to do SET operation.
Hence, in driver, before processing SET_CHANNEL_RANGE IOCTL,
making sure user task has right permission to process the command.
Change-Id: I48bcd55bee45203667bcc679db4ad96aa9e04b7c
CRs-Fixed: 930555
qcacld-2.0 to qcacld-3.0 propagation
Updated the wma, htt modules to address the
issues reported by static code analysis.
CRs-Fixed: 933728
Change-Id: I3437f7d9a12475f4a854412d9f34f48ed7553848
qcacld-2.0 to qcacld-3.0 propagation
Misleading error logs are removed
as part of this fix
CRs-Fixed: 929840
Change-Id: Ifdc10b79359863a4f3c2009403ee5f6c7ab18110
qcacld-2.0 to qcacld-3.0 propagation
All WMI work queue should be cleared and processing stopped before
bus context destruction. This change enforces this rule.
Change-Id: I2e12f3f08424f718ec66fe257060ce13de17ee4e
CRs-Fixed: 840422
We want to process the completions in parallel.
Upper layer should take care of its own thread safety.
hif_completion_thread is a legacy function that does in
context serialization of hif completions. Bypass it.
Change-Id: I73b8518d87645d827814cd1345eb68370de30d1f
CRs-Fixed: 941358
We want to process the completions in parallel.
Upper layer should take care of its own thread safety.
hif_completion_thread is a legacy function that does in
context serialization of hif completions. Bypass it.
Change-Id: I19660327ebb4a3cbb9908ce562ab6c72a6282e95
CRs-Fixed: 941358
Propagation from qcacld-2.0 to qcacld-3.0
Updated the wma, pe module to address the issues reported by static code
analysis.
Change-Id: I8666adf161225014108c189cbcffced9450ae0c4
CRs-Fixed: 889019
qcacld-2.0 to qcacld-3.0 propagation
Free protection_fields_reset_timer in the beginning of peDeleteSession
function to avoid the null defreference caused due to the race condition
between peDeleteSession and pe_reset_protection_callback.
Change-Id: I1b83977bb3683d6dd87ec94a992ac51f39cd97db
CRs-Fixed: 815796
HIFStart is called from HTCWaitTarget in the vos_open function. If
vos_open fails later, the HIFStop is not called to cleanup what is done
in the HIFStart. This change fixes this issue.
qcacld-2.0 to qcacld-3.0 propagation
Git-commit:98808985fb6037c6f33af396aae38224f91c8b4d
Change-Id: Id30f41d953e4582db57a98fff14e3f68447239f1
CRs-Fixed: 831608
Propagation qcacld-2.0 to qcacld-3.0
Host avoid SSR injection ioctl using hdd->isLoadInProgress,
But ol_target_failure handler checks for the
cds_set_load_unload_in_progress. As these two flags are not
set back to back so there is possible time window in which
SSR ioctl is allowed but ol target failure handling is not
allowed.
Change-Id: Ib97d3693f82f6ca94fa048a8120786065e99087a
CRs-Fixed: 913741
qcacld-2.0 to qcacld-3.0 propagation
System crash happened due to accessing NULL pointer in HTCSendPkt.
so added null sanity check to prevent this scenario.
Change-Id: I4c07840eb176847c4a66efc42cd810213e1369b0
CRs-Fixed: 838998
qcacld-2.0 to qcacld-3.0 propagation
In athdiag_procfs_remove, set proc_dir to NULL after removing the
directory. This is to avoid trying to remove the directory which is
already removed.
Change-Id: I01526f4b59ccc991d157c1028d4df5904338f182
CRs-Fixed: 868965
Propagation qcacld-2.0 to qcacld-3.0
while processing ft pre auth response, if memory allocation fails
then host is not setting psavedFTPreAuthRsp to null. Later sme is
freeing same memory as freeing pMsg->bodyptr. Hence on next
disconnect, sme_FtReset try to free psavedFTPreAuthRsp which is
already free.
As a part of this fix, host ensure to set psavedFTPreAuthRsp
Null in all cases.
Change-Id: I144786cd4206bf273d2ffa63889af109cd2744dd
CRs-Fixed: 916416
qcacld-2.0 to qcacld-3.0 propagation
Implement:
1. Send & receive logic of ECSA action frame from P2P-CLI/GO
2. Trigger channel change on P2P GO side once ECSA action frame
is received by,
i) Adding CSA & ESCA IE in beacon template and updating FW to
send it out .
ii) Notifying supplicant of channel change for P2P GO.
This change include HDD changes
CRs-fixed: 895240
Change-Id: Iea66ddbbb8946443d5e701e3c14b2f33c6bb6bf8
qcacld-2.0 to qcacld-3.0 propagation.
Implement:
1. Send & receive logic of ECSA action frame from P2P-CLI/GO
2. Trigger channel change on P2P GO side once ECSA action frame
is received by,
i) Adding CSA & ESCA IE in beacon template and updating
FW to send it out
ii) Notifying supplicant of channel change for P2P GO.
This change include UMAC changes.
CRs-fixed: 895240
Change-Id: Ie6c9154fb44ec75c699e37aaba660c637869c099
This is qcacld-2.0 to qcacld-3.0 propagation
Currently dwell time for PNO scan is passed as 0 to FW irrespective of
values set in config.ini. This patch allows active/passive dwell time
for PNO scan to be controlled by config.ini param.
Change-Id: I5562ed7e176af04ac8f38aa5af97257b9244cdc1
CRs-Fixed: 922054
This is pass 2 of cfg mechanism enahancement. With this patch cfg int
and cfg str buffer are allocated dynamically so no need to maintain
CFG_STA_IBUF_MAX_SIZE and CFG_STA_SBUF_MAX_SIZE manually.
Change-Id: I0f8cb942e93236546aad9963c9451e0399a251ac
CRs-Fixed: 914157
This is qcacld-2.0 to qcacld-3.0 propagation
HDD directly calls in to MAC layer function with mac context as one
of the parameters which is a software layering violation.
Fix the issue by introducing a SME api which accepts hal handle as
one of the parameters instead of mac context and call the SME function
from HDD, which calls the MAC api with correct function parameters.
Change-Id: Iaac4ad7b67b0cb0f7b8b0d08e32904833afad707
CRs-Fixed: 913015
HT_PURE mode indicates either only HT20 STAs are connected
to a HT20 only SAP or HT20/40 STAs are connected to HT20/40
SAP. Otherwise its HT20 protection mode. This patch fixes code
to work accroding to this condition correctly.
Change-Id: Ib431209f5dfc8800d0932752a282c954f0228503
CRs-Fixed: 866447
This is qcacld-2.0 to qcacld-3.0 propagation
In lim function to process hidden SSID, current code was treating
SME sessionID as PE sessionID and hence find session entry for that
was failing. This patch fixes this by using correct "find pe session"
API, that finds PE session by using SME session ID.
Change-Id: I72286cd54a41ae9c01bd916bb0156dd3131eb71c
CRs-Fixed: 934870
Reset the global saved scan command to avoid double free.
In sme_process_set_hw_mode_resp(), after freeing the local
saved_cmd pointer, the global mac->sme.saved_scan_cmd is
not reset to NULL. This ends up in double free in
csr_scan_complete()->csr_handle_nxt_cmd() where we are
still holding a stale pointer.
CRs-Fixed: 941130
Change-Id: Ibb93b8d8e601936c7996518f21646e2c140cbd20
qcacld-2.0 to qcacld-3.0 propagation
replace wait_for_completion_interruptible with wait_for_completion
to do Tlshim Rx shutdown with non-interruptible call.
Change-Id: I09a70fd2818db42401ba2ca91a75244c1f07557e
CRs-Fixed: 820482
qcacld-2.0 to qcacld-3.0 propagation
This fix removes redundant cdf_mem_zero and cdf_mem_copy
Change-Id: I757a2e14358403b7950868fd81d8e58ab3f829df
CRs-Fixed: 796971
qcacld-2.0 to qcacld-3.0 propagation
Reduce log level from pr_err to pr_info to avoid excessive logging
in wlan_queue_logmsg_for_app fn.
Change-Id: I10b728d9fc0c46ca4b4a38a6b060f25cad124207
CRs-Fixed: 840477
For P2P GO + GO concurrency cases, the second P2P GO interface failed
to startup due to the incorrect checkings in the driver code for GO
interface. This fixes the condition checking logic.
Change-Id: I1a8a1b3dd4eed9dd8c824241d7b1759751e53a18
CRs-fixed: 938850
qcacld-2.0 -> qcacld-3.0 propagation
Add support to enable and disable logging for all missing modules
from INI.
Change-Id: I1677a2db48193b1130e0fc07e8bdfc42823d3567
CRs-Fixed: 855168
qcacld-2.0 to qcacld-3.0 propagation
In wlan_hdd_tdls_check_bmps(), NULL check for pHddTdlsCtx will be
TRUE if TDLS support is not enabled. This leads to redundant logs,
as this is called for every scan_done callback.
Call wlan_hdd_tdls_scan_done_callback() only when TDLS support is
enabled.
Change-Id: Ice6f8fb1dc64f0669c19a9b5f5ce3d23c8cdc11c
CRs-Fixed: 672099
qcacld-2.0 to qcacld-3.0 propagation
Fix an issue which enables WDI pipes even when RM resource request
failed, which will cause to invoke WDI pipe enable twice when RM_
RESOURCE_GRANTED notification arrives later.
Also fixed a possible discrapancy between connected client stat count
and actual number of connected clients.
Change-Id: Ibb86ef6ada398fcc669e3a894daadc09e6096b0f
CRs-fixed: 927581
qcacld-2.0 to qcacld-3.0 propagation
When SSR happens, IPA WDI pipes may not be enabled yet,
so need to check if it up before disable it.
Change-Id: I5ff643fcf9804dc0933105079f0653884f7d63dc
CRs-Fixed: 938605
qcacld-2.0 to qcacld-3.0 propagation
Change to return -EINPROGRESS if WLAN unable to grant IPA CONS resource
due to IPA resource loading is in progress.
Return -EPERM only if WLAN unable to grant IPA CONS resource due to
IPA resource unloading is in progress.
Change-Id: Iea4d804d3f81b086e723230fb8eddc7d9561d7d1
CRs-Fixed: 926880
Add Profiling stats support in HOST driver to
have CPU based profiling for critical data
path functions in FW.
Change-Id: Ib6d4f0b220f622cf304536c8e538d4dc34c6434b
CRs-Fixed: 921950
Enable classification of IPv6 frames based on the
traffic class field in the IPv6 header.
Change-Id: I4114cb972f61b75da35a225c07f7628d748a744c
CRs-Fixed: 921955
Log timestamp can come from Qtimer or the system timer.
Record the source in a global variable that will be dumped
with the logs.
Change-Id: Ib168cfdc874426e48b12aac89f00d81ffe9e7fa6
CRs-Fixed: 940773
qcacld-2.0 to qcacld-3.0 propagation
while wlan disconnection is happening, in the process of peer-cleanup
check for tqu->prev to be non-null before calling TAILQ_REMOVE.
Change-Id: I5841dfe80b954bdfac5147f5e3e3661cc85ba4b1
CRs-Fixed: 836447
qcacld-2.0 to qcacld-3.0 propagation
tfm is invalid when alloc fails. Set tfm to NULL to avoid freeing
the crypto transform in crypto_free_cipher()->crypto_destroy_tfm.
Change-Id: I3261377f3a7b6ab5740d4144be9e84a1a3a07e42
CRs-Fixed: 809085
qcacld-2.0 to qcacld-3.0 propagation
As a debug enhancement, call vos_assert in vos timer APIs, when
API fails because of unintialization.
Change-Id: Ib7d4c7995a60b23413eead4603b38ff89ff48715
CRs-Fixed: 810282
qcacld-2.0 to qcacld-3.0 propagation
Currently driver logs are routed as messages to CNSS_DIAG so the
Kernel does not print them into the Kernel log. Add a debug print
to display in kernel log when ever the SSR is triggered using iwpriv.
In dog-food testing, this print would help to separate out the
user-triggered SSR scenarios.
Change-Id: I58f247a26e802bced0c226ee92052ca0d69e1554
CRs-Fixed: 844938
qcacld-2.0 to qcacld-3.0 propagation
Reduce the error log level for LOGP in Progress in
hdd_softap_hard_start_xmit to avoid WD bark
Change-Id: I1be5db2eb9b59f22f735f9c21eeac9a81bb246f5
CRs-Fixed: 824309
qcacld-2.0 to qcacld-3.0 propagation
when EXIT_BMPS is pending in activeList, it causes crash
with excess logging for RoamPending list. In this scenario
gTraceTbl has lost SME details due to other MTRACE commands.
Because of which, the issue is not rootcaused.
Add below changes to rootcause if the issue appears again:
1. print only first 5 commands from roamPendingList
2. Bug_on if the commandlist is full
3. Add MTRACE for PMC commands
CRs-Fixed: 833261
Change-Id: Id5bb399c4a8c8e84ddfa121a66881e3ecb901b05
