There were a great deal of overlap between the two functions
that check which sections may reference .init.text and .exit.text.
Factor out common check to a separate function and
sort entries in the original functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
.note* sections are ELF notes, which are typically used by external
tools to examine the kernel image. Since this is removed from any
runtime consideration, it's OK to reference any section from a .note*
section.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The .paravirtprobe section is obsolete, so modpost doesn't need to handle it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We should do better here by effetively "dereferencing" references to
the .toc (or the .got2) section, but that is much harder.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
On i386 and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name. This is because empty 'refsym' due to 0 r_addend
value. This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There's a special .cranges section that is almost always generated,
with data being moved to the appropriate section by the linker at a later
stage.
To give a bit of background, sh64 has both a native SHmedia instruction
set (32-bit instructions) and SHcompact (which is compatability with
normal SH -- 16-bit, a massively reduced register set, etc.). code ranges
are emitted when we're using the 32-bit ABI, but not the 64-bit one.
It is a special staging section used solely by binutils where code with
different flags get placed (more specifically differing flags for input
and output sections), before being lazily merged by the linker.
The closest I've been able to find to documentation is:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/ld/emultempl/sh64elf.em?rev=1.10&content-type=text/x-cvsweb-markup&cvsroot=src
It's an array of 8-byte Elf32_CRange structure given in
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/bfd/elf32-sh64.h?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=src
that describes for which ISA a range is used.
Silence the warnings by allowing references from .init.text to .cranges.
The following warnings are fixed:
WARNING: init/built-in.o(.cranges+0x0): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0xa): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x14): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x1e): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x28): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x32): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x50): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x5a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x64): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0xfa): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x104): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x10e): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x154): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x15e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x6e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x78): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x82): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0xaa): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x136): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x140): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x168): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1f4): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1fe): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x302): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x30c): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x316): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3a2): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3ac): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4ce): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4d8): Section mismatch: reference to .init.text:
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kaz Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This reverts commit f892b7d480, which
totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as
I can tell, is the only case where it should even matter!) due to a
SIGSEGV in modpost.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
modpost had two cases hardcoded for mm/
Shift over to __init_refok and kill the
hardcoded function names in modpost.
This has the drawback that the functions
will always be kept no matter configuration.
With previous code the function were placed in
init section if configuration allowed it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.
Idea from: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
This patch fixes the following class of "Section mismatch" warnings when
building powerpc platforms.
WARNING: arch/powerpc/kernel/built-in.o - Section mismatch: reference to .init.data:.got2 from prom_entry (offset 0x0)
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:mpc8313_rdb_probe from .machine.desc after 'mach_mpc8313_rdb' (at offset 0x4)
....
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
On i386, ARM and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name. This is because empty 'refsym' due to 0 r_addend
value. This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.
Without this patch:
MODPOST vmlinux
WARNING: init/built-in.o - Section mismatch: reference to .init.text: from .text between 'rest_init' (at offset 0xf4) and 'try_name'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'
With this patch:
MODPOST vmlinux
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'
Now modpost can detect "kernel_init" name (and whitelist it) and show
"set_up_list3s" name.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change modpost section mismatch warnings to be less confusing;
model them on the binutils linker warnings which we all know how
to interpret.
Also, fix the wrong ordering of arguments for the final case -
fromsec and refsymname were reversed.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
POSIX says limits.h defines PATH_MAX so we should include it (which fixes
compiling on some systems like OS X).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Since the devices may have multiple (or none) compatible properties,
the uevent generated internally by the kernel may have multiple
"C..." entries. So the MODALIAS stored in the module must have
wilcard before and after the compatible entry.
Also, if the 'compatible' field is not used for matching, there
will be no 'C' and that must handled as well.
The previous code handled all those case incorrectly and it
"mostly" worked ... but not always.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This will later allow an arch to add module specific information via linker
generated tables instead of poking directly in the module object structure.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.
sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
at boot time, and kmalloc/vmalloc at hotplug time. If config
memory hotplug is on, there are references of bootmem allocater(init text)
from them (normal text). This is cause of section mismatch.
Bootmem is called by many functions and it must be
used only at boot time. I think __init of them should keep for
section mismatch check. So, I would like to register sparse_index_alloc()
and zone_wait_table_init() into white list.
In addition, ia64's .machvec section is function table of some platform
dependent code. It is mixture of .init.text and normal text. These
reference of __init functions are valid too.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
kconfig: fix mconf segmentation fault
kbuild: enable use of code from a different dir
kconfig: error out if recursive dependencies are found
kbuild: scripts/basic/fixdep segfault on pathological string-o-death
kconfig: correct minor typo in Kconfig warning message.
kconfig: fix path to modules.txt in Kconfig help
usr/Kconfig: fix typo
kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
kbuild: be more explicit on missing .config file
kbuild: clarify the creation of the LOCALVERSION_AUTO string.
kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
kconfig: refer to qt3 if we cannot find qt libraries
kbuild: handle compressed cpio initramfs-es
kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
kbuild: remove stale comment in modpost.c
kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
kbuild: fix make mrproper for Documentation/DocBook/man
kbuild: remove kconfig binaries during make mrproper
kconfig/menuconfig: do not hardcode '.config'
kbuild: override build timestamp & version
...
modpost is now called with .o files that are not modules.
So do not warn if there is no corresponding .mod
file listing .o files (in .tmp_versions/).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Some of modpost's warnings are fatal, and some are not. Adopt the
compiler distinction between errors and warnings by calling merror()
for fatal diagnostics and warn() for non-fatal ones.
merror() was used as replacemtn for error() to avoid clash with glibc
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Almost all definitions used by file2alias was already
present in mod_devicetable.h.
Added the last definition and killed the input.h usage.
The errornous include was pointed out
by: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Deepak Saxena <dsaxena@plexity.net>
drivers/video/logo has references from .text to .init.data
but function is only used during early init.
So reference is OK and we do not want to warn about them =>
whitelist the reference.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Now where we do not pass vmlinux to modpost we started
to see section mismatch warnings from .pci_fixup.
Refactored code a little to include these in the
whitelist again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In init/main.c we have a reference from rest_init() to .init.text
which is intentional.
Rename the function 'init' to 'kernel_init' to make it a
kernel wide unique symbol and whitelist the reference.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
vmlinux does not contain relocation entries which is
used by the section mismatch checks.
Reported by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Use the individual objects as inputs to overcome
this limitation.
In modpost check the .o files and skip non-ELF files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y
WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check'
WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present'
o Some functions which are inline (acpi_madt_oem_check) are not inlined by
compiler as these functions are accessed using function pointer. These
functions are put in .text section and they in-turn access __init type
functions hence modpost generates warnings.
o Do not iniline acpi_madt_oem_check, instead make it __init.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits)
[PARISC] Use symbolic last syscall in __NR_Linux_syscalls
[PARISC] Add missing statfs64 and fstatfs64 syscalls
Revert "[PARISC] Optimize TLB flush on SMP systems"
[PARISC] Compat signal fixes for 64-bit parisc
[PARISC] Reorder syscalls to match unistd.h
Revert "[PATCH] make kernel/signal.c:kill_proc_info() static"
[PARISC] fix sys_rt_sigqueueinfo
[PARISC] fix section mismatch warnings in harmony sound driver
[PARISC] do not export get_register/set_register
[PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code
[PARISC] convert to use CONFIG_64BIT instead of __LP64__
[PARISC] use CONFIG_64BIT instead of __LP64__
[PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro
[PARISC] more ENTRY(), ENDPROC(), END() conversions
[PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc
[PARISC] Fixes /proc/cpuinfo cache output on B160L
[PARISC] implement standard ENTRY(), END() and ENDPROC()
[PARISC] kill ENTRY_SYS_CPUS
[PARISC] clean up debugging printks in smp.c
[PARISC] factor syscall_restart code out of do_signal
...
Fix conflict in include/linux/sched.h due to kill_proc_info() being made
publicly available to PARISC again.
This patch stops "modpost" from issuing erroneous modpost warnings on ARM
builds, which it's been doing since since maybe last summer. A canonical
example would be driver method table entries:
WARNING: <path> - Section mismatch: reference to .exit.text:<name>_remove
from .data after '$d' (at offset 0x4)
That "$d" symbol is generated by tools conformant with ARM ABI specs; in
this case it's a symbol **in the middle of** a "<name>_driver" struct.
The erroneous warnings appear to be issued because "modpost" whitelists
references from "<name>_driver" data into init and exit sections ... but
doesn't know should also include those "$d" mapping symbols, which are not
otherwise associated with "<name>_driver" symbols.
This patch prevents the modpost symbol lookup code from ever returning
those mapping symbols, so it will return a whitelisted symbol instead.
Then things work as expected.
Now to revert various code-bloating "fixes" that got merged because of this
modpost bug....
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o Entry startup_32 was in .text section but it was accessing some init
data too and it prompts MODPOST to generate compilation warnings.
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100029) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100037) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to
.init.data:init_pg_tables_end from .text between '_text' (at offset
0xc0100099) and 'startup_32_smp'
o Can't move startup_32 to .init.text as this entry point has to be at the
start of bzImage. Hence moved startup_32 to a new section .text.head and
instructed MODPOST to not to generate warnings if init data is being
accessed from .text.head section. This code has been audited.
o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug
is not supported. Otherwise it generates more warnings
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100126) and 'is486'
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100130) and 'is486'
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
parisc and parisc64 seem to name sections a little differently from other
targets. parisc64 gives spurious warnings like:
WARNING: drivers/net/dummy.o - Section mismatch: reference to .init.text:dummy_setup from .data.rel.ro between '.LC1' (at offset 0x0) and '.LC6'
and parisc gives spurious warnings like:
WARNING: drivers/net/dummy.o - Section mismatch: reference to .init.text:dummy_setup from .rodata.cst4 between '.LC1' (at offset 0x0) and '.LC6'
Given the other comments in modpost.c, it seems that the best solution is
to move rodata down to the 'match at start of name' section and add
.data.rel.ro to the 'match entire name' section.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
o MODPOST generates warning on i386 if kernel is compiled with
CONFIG_RELOCATABLE=y.
WARNING: vmlinux - Section mismatch: reference to .init.text:__init_begin from .text between 'free_initmem' (at offset 0xc0114fd3) and 'do_test_wp_bit'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'core_kernel_text' (at offset 0xc012aeae) and 'kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'core_kernel_text' (at offset 0xc012aeb7) and 'kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'get_symbol_pos' (at offset 0xc0135776) and 'reset_iter'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'get_symbol_pos' (at offset 0xc013577d) and 'reset_iter'
o These symbols (__init_begin, _sinittext, _einittext) belong to init
section and generally represent a section boundary. These are special
symbols in the sense that their size is zero and no memory is allocated
for them in init section. Their addr and value are same. So even if
we free the init section, it is ok to reference them.
o Whitelist access to such select symbols in MODPOST.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
o MODPOST generates warning for i386 if compiled with CONFIG_RELOCATABLE=y
and serial console support is enabled.
o Serial console setup function, serial8250_console_setup(), is a non __init
function and it calls functions which are of type __init().
(uart_parse_options() and uart_set_options()). Assuming, setup will
be called during init time, changing serial8250_console_setup() to __init.
o Adding one more pattern to modpost whitelist. Console drivers might
have *_console structures containing references to setup functions which
can be of __init type. Don't generate warnings for those.
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'serial8250_console' (at offset 0xc05a33d8) and 'serial8250_reg'
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Section .parainstructions should not warn about section mismatches.
WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x0)
WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x8)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It turns out that the most called ops, by several orders of magnitude,
are the interrupt manipulation ops. These are obvious candidates for
patching, so mark them up and create infrastructure for it.
The method used is that the ops structure has a patch function, which
is called for each place which needs to be patched: this returns a
number of instructions (the rest are NOP-padded).
Usually we can spare a register (%eax) for the binary patched code to
use, but in a couple of critical places in entry.S we can't: we make
the clobbers explicit at the call site, and manually clobber the
allowed registers in debug mode as an extra check.
And:
Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT.
And:
AK: Fix warnings in x86-64 alternative.c build
And:
AK: Fix compilation with defconfig
And:
^From: Andrew Morton <akpm@osdl.org>
Some binutlises still like to emit references to __stop_parainstructions and
__start_parainstructions.
And:
AK: Fix warnings about unused variables when PARAVIRT is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
This patch adds support for feature fixups in modules. This involves
adding support for R_PPC64_REL64 relocs to the 64 bits module loader.
It also modifies modpost.c to ignore the powerpc fixup sections (or it
would warn when used in .init.text).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add modalias attribute support for the almost forgotten now EISA bus and
(at least some) EISA-aware modules.
The modalias entry looks like (for an 3c509 NIC):
eisa:sTCM5093
and the in-module alias like:
eisa:sTCM5093*
The patch moves struct eisa_device_id declaration from include/linux/eisa.h
to include/linux/mod_devicetable.h (so that the former now #includes the
latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all
drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE
declared), and adds recognision of __mod_eisa_device_table to
scripts/mod/file2alias.c so that proper modules.alias will be generated.
There's no support for /lib/modules/$kver/modules.eisamap, as it's not used
by any existing tools, and because with in-kernel modalias mechanism those
maps are obsolete anyway.
The rationale for this patch is:
a) to make EISA bus to act as other busses with modalias
support, to unify driver loading
b) to foget about EISA finally - with this patch, kernel
(who still supports EISA) will be the only one who knows
how to choose the necessary drivers for this bus ;)
[akpm@osdl.org: fix the kbuild bit]
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org>
Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At stage 2 modpost utility is used to check modules. In case of unresolved
symbols modpost only prints warning.
IMHO it is a good idea to fail compilation process in case of unresolved
symbols (at least in modules coming with kernel), since usually such errors
are left unnoticed, but kernel modules are broken.
- new option '-w' is added to modpost:
if option is specified, modpost only warns about unresolved symbols
- modpost is called with '-w' for external modules in Makefile.modpost
Signed-off-by: Andrey Mirkin <amirkin@sw.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add a bus for the adjunct processor interface. Up to 64 devices can
be connect to the ap bus interface, each device with 16 domains. That
makes 1024 message queues. The interface is asynchronous, the answer
to a message sent to a queue needs to be received at some later point
in time. Unfortunately the interface does not provide interrupts when
a message reply is pending. So the ap bus needs to implement some
fancy polling, each active queue is polled once per 1/HZ second or
continuously if an idle cpus exsists and the poll thread is activ
(see poll_thread parameter).
The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes,
ap_domain and config_time. The ap_domain selects one of the 16 domains
to be used for this system. This limits the maximum number of ap devices
to 64. The config_time attribute contains the number of seconds between
two ap bus scans to find new devices.
The ap bus uses the modalias entries of the form "ap:tN" to autoload
the ap driver for hardware type N. Currently known types are:
3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is a small but annoying bug in scripts/mod/file2alias.c which causes
it to generate invalid aliases for input devices on 64 bit archs. This causes
joydev.ko to not be automaticly loaded when inserting a joystick, resulting in
a non working joystick (for the average user).
In scripts/mod/file2alias.c is the following code for generating the input
aliases:
static void do_input(char *alias,
kernel_ulong_t *arr, unsigned int min, unsigned int max)
{
unsigned int i;
for (i = min; i < max; i++)
if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
sprintf(alias + strlen(alias), "%X,*", i);
}
On 32 bits systems, this correctly generates "0,*" for the first alias, "8,*"
for the second etc.
However on 64 bits it generates: "0,*20,*" resp "8,*28,*" Notice how it adds 20
+ first entry (hex) ! to the list of hex codes, which is 32 more then the first
entry, thus is because the bit test above wraps at 32 bits instead of 64.
scripts/mod/file2alias.c, line 379 reads:
if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
That should be:
if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG)))
Notice the added 'L' after the 1, otherwise that is an 32 bit int instead of a
64 bit long, and when that int gets shifted >= 32 times, appearantly the number
by which to shift is wrapped at 5 bits ( % 32) causing it to test a bit 32 bits
too low.
The patch below makes the nescesarry 1 char change :)
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The original errormessage was just plain unreadable.
Sample error message after this update (not for real - I provoked it):
FATAL: drivers/net/s2io: sizeof(struct pci_device_id)=33 is not a modulo of the
size of section __mod_pci_device_table=160.
Fix definition of struct pci_device_id in mod_devicetable.h
Before a warning was generated - this is now a fatal error.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We now have infrastructure in place to mark an EXPORTed symbol
as unused. So the natural next step is to warn during buildtime when
a module uses a symbol marked UNUSED.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
read_dump didn't split lines between module name and export type.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
scripts/mod/modpost.c: In function `check_license':
scripts/mod/modpost.c:1094: parse error before `const'
scripts/mod/modpost.c:1095: `basename' undeclared (first use in this function)
scripts/mod/modpost.c:1095: (Each undeclared identifier is reported only once
scripts/mod/modpost.c:1095: for each function it appears in.)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Modules that uses GPL symbols can no longer be build with kbuild,
the build will fail during the modpost step.
When a GPL-incompatible module uses a EXPORT_SYMBOL_GPL_FUTURE symbol
then warn during modpost so author are actually notified.
The actual license compatibility check is shared with the kernel
to make sure it is in sync.
Patch originally from: Andreas Gruenbacher <agruen@suse.de> and
Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch provides the ability to identify the export-type of each
exported symbols in Module.symvers.
NOTE: It updates the Module.symvers file with the additional
information as shown below.
0x0f8b92af platform_device_add_resources vmlinux EXPORT_SYMBOL_GPL
0xcf7efb2a ethtool_op_set_tx_csum vmlinux EXPORT_SYMBOL
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Ignoring references to .init.text, .exit.text from the .plt section brought
the false positives down to two warnings for a defconfig build of ARCH=um
on x86_64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add ".smp_locks" section to whitelist as being safe from
init and exit sections.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Here is an updated r_info layout fix. Please apply "check SHT_REL
sections" patch before this.
64bit mips has different r_info layout. This patch fixes modpost
segfault for 64bit little endian mips kernel.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I found that modpost can not detect section mismatch on mips and i386. On
mips64, the modpost (with r_info layout fix) can detect it. The current
modpst only checks SHT_RELA section but I suppose SHT_REL section should be
checked also. This patch does not contain r_info layout fix. I'll post an
updated r_info layout fix on next mail.
Check SHT_REL sections as like as SHT_RELA sections to detect section
mismatch.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reverts commit c8d8b837eb, which
caused problems for the x86 build. Quoth Sam:
"It was discussed on mips list but apparently the fix was bogus. I
will not have time to look into it so mips can carry this local fix
until we get a proper fix in mainline."
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: Do not overwrite makefile as anohter user
kbuild: drivers/video/logo/ - fix ident glitch
kbuild: fix gen_initramfs_list.sh
kbuild modpost - relax driver data name
kbuild: removing .tmp_versions considered harmful
kbuild: fix modpost segfault for 64bit mipsel kernel
Relax driver data name from *_driver to *driver.
This fixes the 26 section mismatch warnings in drivers/ide/pci.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
64bit mips has different r_info layout. This patch fixes modpost
segfault for 64bit little endian mips kernel.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Darren Jenkins <darrenrjenkins@gmail.com> pointed out a
number of false positives where we referenced variables
from a _driver variable.
Fix it by check for that pattern and ignore it.
Randy.Dunlap <rdunlap@xenotime.net> pointed out a similar
set of warnings for a number of scsi drivers.
In scsi world they misname their variables *_template or
*_sht so add these to list of variables that may have references
to .init.text with no warning.
Randy.Dunlap <rdunlap@xenotime.net> also pointed out a scsi driver
with many references to .exit.text from .rodata. This is compiler
generated references and we already ignore these for .init.text, so
ignore them for .exit.text also.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
before is NULL in this case, concluding from the surrounding code
it seems that after is the right one to use.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits)
kbuild: remove obsoleted scripts/reference_* files
kbuild: fix make help & make *pkg
kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h
Kconfig: remove the CONFIG_CC_ALIGN_* options
kbuild: add -fverbose-asm to i386 Makefile
kbuild: clean-up genksyms
kbuild: Lindent genksyms.c
kbuild: fix genksyms build error
kbuild: in makefile.txt note that Makefile is preferred name for kbuild files
kbuild: replace PHONY with FORCE
kbuild: Fix bug in crc symbol generating of kernel and modules
kbuild: change kbuild to not rely on incorrect GNU make behavior
kbuild: when warning symbols exported twice now tell user this is the problem
kbuild: fix make dir/file.xx when asm symlink is missing
kbuild: in the section mismatch check try harder to find symbols
kbuild: fix section mismatch check for unwind on IA64
kbuild: kill false positives from section mismatch warnings for powerpc
kbuild: kill trailing whitespace in modpost & friends
kbuild: small update of allnoconfig description
kbuild: make namespace.pl CROSS_COMPILE happy
...
Trivial conflict in arch/ppc/boot/Makefile manually fixed up
Jiri Benc <jbenc@suse.cz> reported that modpost would stop with SIGABRT if
used with long filepaths.
The error looked like:
> Building modules, stage 2.
> MODPOST
> *** glibc detected *** scripts/mod/modpost: realloc(): invalid next size:
+0x0809f588 ***
> [...]
Fix this by allocating at least the required memory + SZ bytes each time.
Before we sometimes ended up allocating too little memory resuting in the
glibc detected bug above. Based on patch originally submitted by: Jiri
Benc <jbenc@suse.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The scripts/genksyms/genksyms.c uses hardcoded "__crc_" prefix for
crc symbols in kernel and modules. The prefix should be replaced by
"MODULE_SYMBOL_PREFIX##__crc_" otherwise there will be warnings when
MODULE_SYMBOL_PREFIX is not NULL.
I am sorry my last patch for this issue is actually wrong. I revert
it in this patch.
Signed-off-by: Luke Yang <luke.adi@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix matching of devmodel in modaliases. It breaks automatic loading of any
dasd module.
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Warning now looks like this:
WARNING: vmlinux: 'strcpy' exported twice. Previous export was in vmlinux
Which gives much better hint how to fix it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When searching for symbols the only check performed was if
offset equals st_value. Adding an additional check to see if st_name
points t a valid name made us sort out a few more false positives and
let us report more correct names in warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Building an allmodconfig kernel for ppc64 revealed a number of false
positives - originally reported by Andrew Morton.
This patch removes most if not all false positives for ppc64:
Section .opd
The .opd section contains function descriptors at least for ppc64.
So ignore it for .init.text (was ignored for .exit.text).
See description of function descriptors here:
http://www.linuxbase.org/spec/ELF/ppc64/PPC-elf64abi-1.7.html
Section .toc1
ppc64 places some static variables in .toc1 - ignore the.
Section __bug_tabe
BUG() and friends uses __bug_table. Ignore warnings from that section.
Module parameters are placed in .data.rel for ppc64, for adjust pattern to
match on section named .data*
Tested with gcc: 3.4.0 and binutils 2.15.90.0.3
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In several cases the section mismatch check triggered false warnings.
Following patch introduce a whitelist to 'false positives' are not warned of.
Two types of patterns are recognised:
1) Typical case when a module parameter is _initdata
2) When a function pointer is assigned to a driver structure
In both patterns we rely on the actual name of the variable assigned
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
It seems popular to protect your work with copyright, so I decided to do
so for modpost which I patch a great deal atm.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andrew Morton reported a number of false positives for ia64 - like these:
WARNING: drivers/acpi/button.o - Section mismatch: reference to .init.text: from .IA_64.unwind.init.text after '' (at offset 0x0)
WARNING: drivers/acpi/button.o - Section mismatch: reference to .exit.text: from .IA_64.unwind.exit.text after '' (at offset 0x0)
WARNING: drivers/acpi/processor.o - Section mismatch: reference to .init.text: from .IA_64.unwind after '' (at offset 0x1e8)
They are all false positives - or at least the .c code looks OK.
It is not known why sometimes a section name is appended and sometimes not.
Fix is to accept references from all sections that includes "unwind." in the name.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The kernel now requires that CC be 3.1.0 or higher. But we shouldn't place
that requirement upon HOSTCC unless we really need to. Fixes my ia64 problem.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Do not try to look up section name until we know it is not a special
section. Otherwise we will address outside legal space and segfault.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
A combination of calling modpost with option -a and MODVERDIR undefined
caused segmentation fault. So provide a default value and accept the
error messages it generates instead.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Section mismatch is identified as references to .init*
sections from non .init sections. And likewise references
to .exit.* sections outside .exit sections.
.init.* sections are discarded after a module is initialized
and references to .init.* sections are oops candidates.
.exit.* sections are discarded when a module is built-in and
thus references to .exit are also oops candidates.
The checks were possible to do using 'make buildcheck' which
called the two perl scripts: reference_discarded.pl and
reference_init.pl. This patch just moves the same functionality
inside modpost and the scripts are then obsoleted.
They will though be kept for a while so users can do double
checks - but note that some .o files are skipped by the perl scripts
so result is not 1:1.
All credit for the concept goes to Keith Owens who implemented
the original perl scrips - this patch just moves it to modpost.
Compared to the perl script the implmentation in modpost will be run
for each kernel build - thus catching the error much sooner, but
the downside is that the individual .o file are not always identified.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In modpost introduce a check for symbols exported twice.
This check caught only one victim (inet_bind_bucket_create) for
which a patch is already sent to netdev.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With following patch a second option is enabled to obtain
symbol information from a second external module when a
external module is build.
The recommended approach is to use a common kbuild file but
that may be impractical in certain cases.
With this patch one can copy over a Module.symvers from one
external module to make symbols (and symbol versions) available
for another external module.
Updated documentation in Documentation/kbuild/modules.txt
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Here's the patch for modalias support for input classes. It uses
comma-separated numbers, and doesn't describe all the potential keys (no
module currently cares, and that would make the strings huge). The
changes to input.h are to move the definitions needed by file2alias
outside __KERNEL__. I chose not to move those definitions to
mod_devicetable.h, because there are so many that it might break compile
of something else in the kernel.
The rest is fairly straightforward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a problem when we use well known kernel symbols as module
names.
For example, if module source name is current.c, idle_stack.c or etc.,
we have a bad KBUILD_MODNAME value.
For example, KBUILD_MODNAME will be "get_current()" instead of "current", or
"(init_thread_union.stack)" instead of "idle_task".
The trick is to define a stringify macro on the commandline - named
KBUILD_STR for namespace reasons - and then to stringify the module
name.
There are a few uses of KBUILD_MODNAME throughout the tree but the usage
is for debug and will not be harmed by this change so left untouched for now.
While at it KBUILD_BASENAME was changed too. Any spinlock usage in the
unix module would have created wrong section names without it.
Usage in spinlock.h fixed so it no longer stringify KBUILD_BASENAME.
Original patch from Ustyogov Roman - all bugs introduced by me.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This is the patch for the following issue:
In include/linux/module.h, "__crc_" and "__ksymtab_" are hard
coded to be the prefix for some kinds of symbols (CRC symbol and
ksymtab section). But in script /mod/modpost.c,
MODULE_SYMBOL_PREFIX##"__crc_" is used as the prefix to search CRC
symbols. So if an architecture (such as h8300 or Blackfin) defines
MODULE_SYMBOL_PREFIX as not NULL ("_"), modpost will always warn about
"no invalid crc".
And it is the same with KSYMTAB_PFX.
Signed-off-by: Luke Yang <luke.adi@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Added a missing TO_NATIVE call to scripts/mod/file2alias.c:do_pcmcia_entry()
- Add an alignment attribute to struct pcmcia_device_no to solve an alignment
issue seen when cross-compiling on x86 for m68k.
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
From: Al Viro <viro@ZenIV.linux.org.uk>
Instead of playing all of these hand-coded assembler aliasing games,
just translate symbol names in the name space ".sym" to "_Sym" at
module load time.
Signed-off-by: David S. Miller <davem@davemloft.net>
