Add config to compile audio low power island TLMM drivers
for kona.
Change-Id: I35a06ba826c1835cc8129acf3591c9fcf0a19214
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add and enable configuration for voice mhi driver
for kona target.
Change-Id: I43c28fbe26a5429f1a30b056ff96a9815acb3aa4
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add configuration flag to make use of 32channel support from
QDSP6.
Change-Id: I1e491b1ec870234140e914add4f177e5351b9953
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Update config file and make rules for msmsteppe
compilation.
Change-Id: I374a0725a7dd36edc9e04652fb07dc719310565c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add config for ep92 device to be enabled in QCS405
Change-Id: I9f1529ff9917866986dd2ab81ac5ed9381592be0
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add AFE HW CAL dep node in config and fix the set sampling rate
for codec dma interface
Change-Id: I9165a80da00bfb5b61bbf4f0391ff794d8fba352
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add config for CSRA66X0 device to be enabled in QCS405
Change-Id: I3cddb26fa7ebb03da89113d7f051b25d614c9ad0
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Update vipertooth auto conf files to include new
soundwire master
Change-Id: I1854e392cc376aec0eb36147231a8e38127b4102
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Update all audio drivers to use updated chipset name in
files, functions, architecture specific configurations
and the device tree compatible strings.
Change-Id: I507948866213ddb8806edea71a57c1f29ce7e71b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
As CONFIG_SND_HWDEP is defined by default
in kernel tree, msm-pcm-routing-devdep.c file
in audio drivers gets compiled always.
Use CONFIG_SND_HWDEP_ROUTING config instead of
CONFIG_SND_HWDEP to compile msm-pcm-routing-devdep.c
file.
Change-Id: I19c4b0a56dbe6c4890ece645fcf100687f762f5d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Enable compilation of audio drivers for SDXPOORWILLS.
Change-Id: I2a8d949f98ab6fb56111dffdab51d9123a41c3c1
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Make autoconf changes to enable compilation of
analog and digital codec separately.
Change-Id: I0e7da48ead0bfe535f9103776845e068a3c149d3
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
To support DLKM audio for WCD/WSA drivers on SDM845,
update conf file to install as module(.ko) for required configs.
CRs-Fixed: 2082310
Change-Id: I359799ac8c8ac050fce1eac8741837004f9f6a0b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add new conf files to support sdm670 audio.
Also update sdm845 to support required configs.
Change-Id: I3b0ac16d80bba10a3226dbe5c1b39c64b5780ac9
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable the configs for WCD DSP Glink and avtimer drivers.
Remove the CDSP Loader config as it is not audio related.
Change-Id: Ic6101e106c1e1d91bece6f53d1572507570b6b6f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
New conf files are required to enable config for
audio techpack. Add respective files for SDM845.
This provides required config to compile required files
for SDM845 audio.
Change-Id: Ic93d0df0da03d7f891267994380729602ce64c65
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>