The current probe table causes ledma and lebuffer
"le" devices to get probed twice which is not what
we want.
Match just "le" and look directly at the parent to get the correct
top-level node information.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
This problem was introduced by changeset
14778d9072
Unlike the hugetlb code paths, the normal fault code is not setup to
propagate PTE changes for large page sizes correctly like the ones we
make for I/O mappings in io_remap_pfn_range().
It is absolutely necessary to update all sub-ptes of a largepage
mapping on a fault. Adding special handling for this would add
considerably complexity to tlb_batch_add(). So let's just side-step
the issue and forcefully dirty any writable PTEs created by
io_remap_pfn_range().
The only other real option would be to disable to large PTE code of
io_remap_pfn_range() and we really don't want to do that.
Much thanks to Mikael Pettersson for tracking down this problem and
testing debug patches.
Signed-off-by: David S. Miller <davem@davemloft.net>
Found by inspection. The STRIP driver does neigh_lookup() but never
releases. This driver shouldn't being doing gratuitous arp anyway.
Untested, obviously, because of lack of hardware.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_add_addr allocates a struct inet6_ifaddr and a dstentry, but it
doesn't install the dstentry in ifa->rt until after it releases the
addrconf_hash_lock. This means other CPUs will be able to see the new
address while it hasn't been initialized completely yet.
One possible fix would be to grab the ifp->lock spinlock when
creating the address struct; a simpler fix is to just move the
assignment.
Acked-by: jbeulich@novell.com
Acked-by: okir@suse.de
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes crash happen if initialization of nl_table fails
in initcalls. It is better than getting use after free crash later.
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) fix slow start after retransmit timeout
2) fix case of L=2*SMSS acked bytes comparison
Signed-off-by: Daikichi Osuga <osugad@s1.nttdocomo.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I tested Linux kernel 2.6.17.7 about statistics
"ipv6IfStatsInAddrErrors", found that this counter couldn't increase
correctly. The criteria is RFC2465:
ipv6IfStatsInAddrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input datagrams discarded because
the IPv6 address in their IPv6 header's destination
field was not a valid address to be received at
this entity. This count includes invalid
addresses (e.g., ::0) and unsupported addresses
(e.g., addresses with unallocated prefixes). For
entities which are not IPv6 routers and therefore
do not forward datagrams, this counter includes
datagrams discarded because the destination address
was not a local address."
::= { ipv6IfStatsEntry 5 }
When I send packet to host with destination that is ether invalid
address(::0) or unsupported addresses(1::1), the Linux kernel just
discard the packet, and the counter doesn't increase(in the function
ip6_pkt_discard).
Signed-off-by: Lv Liangying <lvly@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several people run into the situation where the E100
EEPROM contents are fine, but the checksum hasn't been
set properly. This renders the device useless for
them even though it would function correctly.
The default is off, which retains the current behavior.
Signed-off-by: David S. Miller <davem@davemloft.net>
With the recent fix, the callers of sctp_primitive_ABORT()
need to create an ABORT chunk and pass it as an argument rather
than msghdr that was passed earlier.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
conversion.
Since bma.conv is a char and XFS_BMAPI_CONVERT is 0x1000, bma.conv was
always assigned zero. Spotted by the GNU C compiler (SVN version).
SGI-PV: 947312
SGI-Modid: xfs-linux-melb:xfs-kern:26887a
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
The booting-without-of.txt had incorrect definition for the sense codes
for an OpenPIC controller
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When reworking the powerpc irq code, I figured out that we were using
the radix tree in a racy way. As a temporary fix, I put a spinlock in
there. However, this can have a significant impact on performances. This
patch reworks that to use a smarter technique based on the fact that
what we need is in fact a rwlock with extremely rare writers (thus
optimized for the read path).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch adds the mpc7448hpc2 device tree source file.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code.
renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This converts ipic code to Benh's IRQ mods. For the IPIC, IRQ sense values in the device tree equal those in include/linux/irq.h; that's 8 for low assertion (most internal IRQs on mpc83xx), and 2 for high-to-low change.
spinlocks added to [un]mask, ack operations; default handler and type now set in host_map; and redundant condition check eliminated.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Keep from breaking 83xx arch/ppc build. Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Do not send Query All EAs SMB when mount option nouser_xattr
[CIFS] endian errors in lanman protocol support
[CIFS] Fix oops in cifs_close due to unitialized lock sem and list in
[CIFS] Fix oops when negotiating lanman and no password specified
[CIFS]
[CIFS] Allow cifsd to suspend if connection is lost
[CIFS] Make midState usage more consistent
[CIFS] spinlock protect read of last srv response time in timeout path
[CIFS] Do not time out posix brl requests when using new posix setfileinfo
Change both the NODES_SHIFT and the NR_CPUS so that even big machines
can boot all nodes and processors with a generic kernel.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
sn_change_memprotect() does a local_irq_save() then calls
ia64_sal_oemcall_nolock() which calls SAL_CALL_NOLOCK()
which also does a local_irq_save().
This patch removes the redundant local_irq_save() and local_irq_restore()
calls in sn_change_memprotect() and sn_inject_error().
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers
[ARM] Add Integrator support for glibc outb() and friends
[ARM] Move prototype for register_isa_ports to asm/io.h
[ARM] Arrange for isa.c to use named initialisers
[ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems
[ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en
[ARM] 3758/1: Preserve signalling NaNs in conversion
[ARM] 3749/3: Correct VFP single/double conversion emulation
[ARM] 3748/3: Correct error check in vfp_raise_exceptions
Patch from Lennert Buytenhek
On armv4t systems, we have always compiled the kernel with -march=armv4
instead of -march=armv4t, which means that any use of bx will bomb out.
Commit ba9b5d7637 introduced the use of
bx in the kernel, which means we need to compile with -march=armv4t on
armv4t systems now.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add the necessary call to register_isa_ports() so that glibc knows
where these are found on Integrator platforms.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Unlike the other tty comment patch this one has code changes. Specifically
it limits the queue size for a tty to 64K characters (128Kbytes) worst case
even if the tty is ignoring tty->throttle. This is because certain drivers
don't honour the throttle value correctly, although it is a useful
safeguard anyway.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Doesn't fix them but does show up some interesting areas that need review
and fixing.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix printk format warning:
drivers/cdrom/gscd.c:269: warning: format â%luâ expects type âlong unsigned intâ, but argument 2 has type âunsigned intâ
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
None of the other /proc/meminfo lines have a space in the identifier. This
post-2.6.17 addition has the potential to break existing parsers, so use an
underscore instead (like Committed_AS).
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes the locking error noticed by lockdep:
=============================================
[ INFO: possible recursive locking detected ]
---------------------------------------------
init/1 is trying to acquire lock:
(&sighand->siglock){....}, at: [<c047a78a>] flush_old_exec+0x3ae/0x859
but task is already holding lock:
(&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859
other info that might help us debug this:
2 locks held by init/1:
#0: (tasklist_lock){..--}, at: [<c047a76a>] flush_old_exec+0x38e/0x859
#1: (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859
stack backtrace:
[<c04051e1>] show_trace_log_lvl+0x54/0xfd
[<c040579d>] show_trace+0xd/0x10
[<c04058b6>] dump_stack+0x19/0x1b
[<c043b33a>] __lock_acquire+0x773/0x997
[<c043bacf>] lock_acquire+0x4b/0x6c
[<c060630b>] _spin_lock+0x19/0x28
[<c047a78a>] flush_old_exec+0x3ae/0x859
[<c0498053>] load_elf_binary+0x4aa/0x1628
[<c0479cab>] search_binary_handler+0xa7/0x24e
[<c047b577>] do_execve+0x15b/0x1f9
[<c04022b4>] sys_execve+0x29/0x4d
[<c0403faf>] syscall_call+0x7/0xb
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
reiserfs seems to have another locking level layer for the i_mutex due to the
xattrs-are-a-directory thing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.
(this has no effect on kernels with lockdep disabled. On kernels with lockdep
enabled this means that we wont actually disable interrupts, and the warning
message will go away as well.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In file included from include/asm/mmzone.h:18,
from include/linux/mmzone.h:439,
<snip>
include/asm/srat.h:31:2: error: #error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
This can happen with CONFIG_NUMA && !CONFIG_ACPI && !CONFIG_X86_NUMAQ
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cpuset_excl_nodes_overlap always returns 0 if current is exiting. This caused
customer's systems to panic in the OOM killer when processes were having
trouble getting memory for the final put_user in mm_release. Even though
there were lots of processes to kill.
Change to returning 1 in this case. This achieves parity with !CONFIG_CPUSETS
case, and was observed to fix the problem.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
register_one_node()'s should be defined under CONFIG_NUMA=n.
fixes following bug.
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
mm/built-in.o: In function `add_memory': undefined reference to `register_one_node'
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JBD currently allocates commit and frozen buffers from slabs. With
CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page
boundary causing IO problems.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127
So, instead of allocating these from regular slabs - manage allocation from
its own slabs and disable slab debug for these slabs.
[akpm@osdl.org: cleanups]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the list of cpus allowed to tasks in the top (root) cpuset to
dynamically track what cpus are online, using a CPU hotplug notifier. Make
this top cpus file read-only.
On systems that have cpusets configured in their kernel, but that aren't
actively using cpusets (for some distros, this covers the majority of
systems) all tasks end up in the top cpuset.
If that system does support CPU hotplug, then these tasks cannot make use
of CPUs that are added after system boot, because the CPUs are not allowed
in the top cpuset. This is a surprising regression over earlier kernels
that didn't have cpusets enabled.
In order to keep the behaviour of cpusets consistent between systems
actively making use of them and systems not using them, this patch changes
the behaviour of the 'cpus' file in the top (root) cpuset, making it read
only, and making it automatically track the value of cpu_online_map. Thus
tasks in the top cpuset will have automatic use of hot plugged CPUs allowed
by their cpuset.
Thanks to Anton Blanchard and Nathan Lynch for reporting this problem,
driving the fix, and earlier versions of this patch.
Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A recent patch broke the ability to do a user-request check of a raid1.
This patch fixes the breakage and also moves a comment that was dislocated
by the same patch.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If we
- shut down a clean array,
- restart with one (or more) drive(s) missing
- make some changes
- pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.
To avoid this, we only update the eventcount backwards when the array
is not degraded. In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix two compile failures in eventpoll.c code which would happen if
DEBUG_EPOLL is bigger than zero.
Signed-off-by: Masoud Sharbiani <masouds@google.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here's updated documentation for the relay interface, rewritten to match
the relayfs->relay changes. It also moves relayfs.txt to relay.txt in the
process.
It includes the changes to relayfs.txt previously posted by Randy Dunlap,
thanks for those.
The relay-apps examples have also been updated to match, and can be found
on the sourceforge relayfs website.
Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
An up() is called in kernel/stop_machine.c on failure, and also in the
caller (unconditionally).
Signed-off-by: Zhou Yingchao <yingchao.zhou@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1) When we allocated last fragment in ufs_truncate, we read page, check
if block mapped to address, and if not trying to allocate it. This is
wrong behaviour, fragment may be NOT allocated, but mapped, this
happened because of "block map" function not checked allocated fragment
or not, it just take address of the first fragment in the block, add
offset of fragment and return result, this is correct behaviour in
almost all situation except call from ufs_truncate.
2) Almost all implementation of UFS, which I can investigate have such
"defect": if you have full disk, and try truncate file, for example 3GB
to 2MB, and have hole in this region, truncate return -ENOSPC. I tried
evade from this problem, but "block allocation" algorithm is tied to
right value of i_lastfrag, and fix of this corner case may slow down of
ordinaries scenarios, so this patch makes behavior of "truncate"
operations similar to what other UFS implementations do.
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On UFS, this scenario:
open(O_TRUNC)
lseek(1024 * 1024 * 80)
write("A")
lseek(1024 * 2)
write("A")
may cause access to invalid address.
This happened because of "goal" is calculated in wrong way in block
allocation path, as I see this problem exists also in 2.4.
We use construction like this i_data[lastfrag], i_data array of pointers to
direct blocks, indirect and so on, it has ceratain size ~20 elements, and
lastfrag may have value for example 40000.
Also this patch fixes related to handling such scenario issues, wrong
zeroing metadata, in case of block(not fragment) allocation, and wrong goal
calculation, when we allocate block
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To handle the earlier bogus ENOSPC error caused by filesystem full of block
reservation, current code falls back to non block reservation, starts to
allocate block(s) from the goal allocation block group as if there is no
block reservation.
Current code needs to re-load the corresponding block group descriptor for
the initial goal block group in this case. The patch fixes this.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mounting an ext2 filesystem with zero s_inodes_per_group will cause a
divide error.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
