Change I1f668fff633a5e5cdfc478e7f619e9600930b333 ("qcacld-3.0: Use wma
callback to get vdev dp handle") removed the implementation of
pmo_ucfg_vdev_update_dp_handle(), but left behind the stub
implementation for use when PMO is disabled. This stub, since renamed
to ucfg_pmo_vdev_update_dp_handle(), is unused, so remove it.
Change-Id: I042ea081a4c2e5288963f7882129d06667e5b707
CRs-Fixed: 2380780
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
Based on new cfg framework, refactor below WNI and INI cfg items:
- WNI_CFG_PS_WOW_DATA_INACTIVITY_TIMEOUT
- g_wow_data_inactivity_timeout
- gDisablePacketFilter
Change-Id: I9a975263021ba4fd5ccea19ed1147a661f73317f
CRs-Fixed: 2375866
Currently if a vdev is destroyed, wow patterns are not
getting cleared for that vdev, so when a new vdev is
created, host tries to configure new wow patterns for
this new vdev but due to FW limitations on number of
wow patterns that can be maintained at FW, FW is not
able to act on this filter and will not maintain this
new wow filter.
To resolve this issue, clear the wow patterns for the
vdev before it gets destroyed.
Change-Id: Iae7ad8b683c95d8eaf11355bc0e36b91cece2202
CRs-Fixed: 2344337
To keep names of PMO ucfg APIs consistent, change some of them from
"pmo_ucfg_xxx" to "ucfg_pmo_xxx".
Change-Id: I77165be8c5c408c3f91f84a477c15be1c6ea15e8
CRs-Fixed: 2334109
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Update driver to use NAN config params based converged CFG
component. Cleanup hdd config references to nan ini params.
Change-Id: I5af85d68ee53ad557e64523f7a1719e328536926
CRs-fixed: 2290360
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
There are several logs in PMO that log debugging related information
at the INFO level. Reduce the logging level of these debug logs to
avoid spamming the console.
Change-Id: Ib1bb9279d5d8104104b58bd2c83869f72c0bde4a
CRs-Fixed: 2260190
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
Currently while sending wmi command when target is suspend, it will
check whether command is WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID/
WMI_PDEV_RESUME_CMDID, but D0WOW command is an exception, to keep align
with legacy code so don't set wmi_handle->is_target_suspended if it is
D0WOW enable command.
Move out logic of checking D0WOW status from PMO tgt to core layer.
Change-Id: I164f24ea733e54e5e0dbdb77344917df5d039e53
CRs-Fixed: 2254047
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
The following PMO functions have been identified as having off-by-one
logic errors. Address these errors.
* pmo_register_resume_handler
* pmo_register_suspend_handler
* pmo_unregister_resume_handler
* pmo_suspend_all_components
Change-Id: I6a328fc24ae6a575ef56cf9532133eb666e0dc8c
CRs-Fixed: 2232388
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: Iaccda7d9e895cdb4610f0ec984add3aeb7ef9926
CRs-Fixed: 2227330
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: I2c88b6af33e8f10f1837263f157c1f6892a2c2fb
CRs-Fixed: 2227326
Historically, recovery was triggered if PDEV suspend failed, but the
logic was lost during componentization. Restore the previous logic of
triggering recovery on PDEV suspend timeout.
Change-Id: I6e193e98c5ef45fd7ab4b6595ea85d986fa84131
CRs-Fixed: 2215588
In order to better align with the other PMO logging wrappers, and the
rest of the driver, rename the following macros:
* PMO_ENTER -> pmo_enter
* PMO_EXIT -> pmo_exit
Change-Id: I9186c1425f22c5a8d4fc98f048a9d487b6095797
CRs-Fixed: 2206650
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2
num_packet_filter = Packet Filter enabled ? 12 : 0xffffffff
Change-Id: Ie8cb4ae44c83b115b249e22ebd7146278ed70612
CRs-Fixed: 2199297
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
Provide PMO-specific device capabilities to PMO. This allows PMO to do
intersections between configuration and device capabilities.
Change-Id: If0a199f9be466d16cef900a29b14b73a2a4e52d0
CRs-Fixed: 2197828
pmo_core_wow_enter(), pmo_core_wow_exit() and struct
pmo_wow_enter_params are all dead code. Remove them.
Change-Id: I254a0bad794ffc1170a2799918e1627a3e01e340
CRs-Fixed: 2199462
It is really common to want to update or read from the PMO private
context, but doing so requires several lines boilerplate code. Because
this boilerplate is in so many places, mistakes like using the wrong
lock operation, or forgetting to use locks at all, are a always a
danger. Add pmo_psoc_with_ctx() to address this deficiency, which
retrieves the private context pointer, locks on entry, and unlocks on
exit. Usage is like so:
struct pmo_psoc_prov_obj *psoc_ctx;
pmo_psoc_with_ctx(psoc, psoc_ctx) {
/* use psoc_ctx */
}
Which is equivalent to:
struct pmo_psoc_prov_obj *psoc_ctx;
psoc_ctx = pmo_psoc_get_priv(psoc);
qdf_spin_lock_bh(&psoc_ctx->lock);
/* use psoc_ctx */
qdf_spin_unlock_bh(&psoc_ctx->lock);
Change-Id: I6a3ccbfbfb57c589d44c7eae57e2ed8272dae3ee
CRs-Fixed: 2197722
Under unregistering of PMO handlers, incoming component id is sanity
checked. In the logic, WLAN_UMAC_MAX_COMPONENTS as id will not cause
failure even though it is an id beyond the acceptable bound.
Correct the logic so that WLAN_UMAC_MAX_COMPONENTS ends up in failure.
Change-Id: I6935f34c6d91a4217c3f7f73cd5539af2741ed2b
CRs-Fixed: 2091831
Rename pmo_ucfg_* API to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I59491eff038709a883efb527168159a7e9e2ba2a
CRs-Fixed: 2145088
Measurement pilot public action frame (Action Id = 7) is not
handled in the driver, if the AP is sending this action frame
it ends up waking up the APPS and burn battery.
Since anyway host is not handling this action frame, configure
the firmware to drop this action frame.
Change-Id: I15327f9af8cccaa7324e4e39f1e6336225740b75
CRs-Fixed: 2146506
Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: Ia2107ff6939666b4a0bd19d57149d17814f2dfb5
CRs-Fixed: 2070426
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141065
Rename pmo_ucfg_* APIs to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I9fba71ee5d5cf6428f043c7d7782ef585951e059
CRs-Fixed: 2140474
Rename pmo_ucfg_is_vdev_connected to ucfg_pmo_is_vdev_connected
to match existing naming convention for component ucfg APIs.
Change-Id: Idd04103664135f226881b07263365d70df5790e0
CRs-Fixed: 2135888
Rename pmo_ucfg_is_ap_mode_supports_arp_ns to ucfg_pmo_*
to match existing naming convention for component ucfg APIs.
Change-Id: I6877e1ebbc8a89d9b2cfb08f7af46e3f3b6606f3
CRs-Fixed: 2135193
