Enable converged control path scheduler for cld driver
and disable legacy cds MC thread scheduler.
Change-Id: I11ecc6a5ee930a1039ed3460b3a3d4e5f7b75ac6
CRs-Fixed: 1095867
Propagation from qcacld-2.0 to qcacld-3.0.
If the module name is changed to something other than wlan in
Makefile or Kbuild, then MULTI_IF_NAME is defined to be the module name.
When MULTI_IF_NAME is defined, the names for the config files, log files,
and firmware files are prepended or appended with MULTI_IF_NAME. This
prevents file name collisions allowing multiple instances of this driver
to be loaded with different module names.
Change-Id: Id880c5fe423eb0b2a2c01677d8fa7c4a784c74df
CRs-Fixed: 946520
Change to enable per virtual device transmit descriptors
in Kbuild for lithium.
Change-Id: I2824de2daa5bce7b0ab6993fb7f85ea01ac0849d
CRs-Fixed: 1089685
CONFIG_PLD_PCIE_INIT indicates that pcie initialization
and io remap have allready been done by the platform driver,
and should not be re-done by the wlan driver.
This is to facilitate shared controll between the MHI & wlan
drivers.
Change-Id: I97704076d1efe2a8d980c8f659f05367ca82a5f6
CRs-Fixed: 1097375
This is a qcacld-2.0 to qcacld-3.0 propagation.
Enable the compiler's -Wheader-guard switch. This will help
catch mismatches between #ifndef and #define lines in header guard.
Change-Id: Ic05a829eadbf974598370c494a5cff10201ec600
CRs-Fixed: 1091052
Propagation from qcacld-2.0
Change hard coded RX wakelock duration into an ini configuration item.
Only aquire the wakelock for unicast traffic, and if the configured
wakelock item is greater than 0.
Change-Id: I46b946ddfeae510a5446ff4ab012c09e4964a50c
CRs-Fixed: 1068594
Enable unit-test suspend/resume ioctls for all SLUB builds, for a
better out-of-the-box debug experience.
Change-Id: Iab6662a39125371ab700c8482e06cd98a3d171a5
CRs-Fixed: 1098034
Define basic dispatcher framework for init/deinit. Each individual
component is supposed to define its init/deinit primitives and replace
dummy place holder primitives.
Change-Id: I35140ea7af03ce568e1732435458caf78ab28996
CRs-Fixed: 1095741
For Napier end-to-end bringup:
-- Disable PKTLOG, this is not ready on the new HW design
-- Enable timer based polling on DP UMAC rings
-- Modify cdp_soc_attach() to attach to Lithium DP
Change-Id: I096644887848dd8eae75bf4c497acc0b19f89833
CRs-Fixed: 1074199
qcacld-2.0 to qcacld-3.0 propagation
Add sanity check for tx desc to avoid crash if firmware report the invalid
msdu id to the host.
Change-Id: I5a339e81f3de882b5f7cc42b0628ea4738141c58
CRs-Fixed: 1071620
QCA6290 is part of the Lithium chipset family. Without
support for lithium, compiling in the register deffinitions
for QCA6290 does not make sense.
Change-Id: Id251a931287d2662e0b910da299c12e9d45b719c
Codeswap feature is introduced for a WLAN chipset which is already
cancelled. It is no longer used in host driver. Remove the feature
to avoid any confusion for future development.
Change-Id: I70ae291ded2d2e290408e2f5b177e872f1f3d7e8
CRs-fixed: 1082183
This is a qcacld-2.0 to qcacld-3.0 propagation.
pr_debug() should not appear by default in kernel log (kmsg).
DEBUG is a kernel macro, since host driver is using the same name macro,
pr_debug log statements are appearing in kmsg.
Fix this by moving the code under DEBUG to WLAN_DEBUG and
remove DEBUG macro from Kbuild.
Change-Id: I5bb385f91f9b6ba15629a5878625fefc21d4a7e1
CRs-Fixed: 1003261
Currently we are using different flags to enable compilation of pld_usb.c
and one to enable/disable PLD USB stub functions. Use the same flag for
both cases - CONFIG_PLD_USB_CNSS
Change-Id: Icc89405d785f3fc0ebc4a97d234013ac86ebd068
CRs-Fixed: 1076326
Add changes to parse DISA parameters received from
user space and pass them to firmware for firmware
to encrypt data and send back to driver. Also, add
changes to print encrypted data received from firmware.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1064970
Currently the Green AP feature is only enabled on mobile router
platforms. Enable it on the msmcobalt platform as well.
Change-Id: Ib5000b2201cc2c7bd88e3d322b186afcdb0a72e3
CRs-Fixed: 1072412
Host should not honor any vendor pktlog disable command
if NO vendor pktlog enable command is sent previously.
Currently, vendor sends pktlog disable command without sending enable
command during init and because pktlog is enabled in ini by default,
Host sends the pktlog disable command to firmware which is not as expected.
To fix this, host uses reserved flag in wifi_start_log to distinguish
vendor command from iwpriv or pktlog conf tool command and vendor disable
pktlog command will be sent to firmware only when vendor pktlog enable
commands is sent previously.
Moreover, pktlog INI enable by default and Pktlog buffer size are now
controlled using a macro FEATURE_PKTLOG depending on build variant.
For production/user build, pktlog is default disable and buffer size is
1 MB, whereas for dev build, pktlog is default enable and buffer size is
10 MB.
Change-Id: If64cd522e91cbe9a6d94d8626eb758282fcfd1bd
CRs-Fixed: 1072584
qcacld-2.0 to qcacld-3.0 propagation
Currently DSRC feature is compiled for all the
targets even if DSRC is not required.
Fix to protect DSRC changes with DSRC enabled feature.
Change-Id: I2e6f975366e1de8aa8afb818a073e1591f76d7fb
CRs-Fixed: 1053362
Add throughput policy handler which triggers irq/CPU mananagement
functions as required.
Adapt NAPI enablement code to recent changes to the init sequence.
Add to the new files to build.
Change-Id: I8c16667a08982e419c2f2152cf31afcd3a535eb4
CRs-Fixed: 1064917
Compile in runtime pm code for mcl. Maintain compilation
of runtime pm for future product lines and discrete chipsets.
Change-Id: Ieb34a64bf4624e959ae64aafa8ab03085aad9164
CRs-Fixed: 1044155
Turn off opportunistic key caching (OKC) in firmware based on
"OkcEnabled" parameter in WCNSS_qcom_cfg.ini.
It is enabled by default and can be turned off with value 0.
Remove FEATURE_WLAN_OKC compilation option because OKC is always
compiled in for cld3.0. Remove underlying empty routine
cb_notify_set_okc_feature_enabled().
CRs-Fixed: 1057181
Change-Id: I174e860abef0532d62517635fe56927d8c3c9fd3
APPS suspend/resume support is ready. By default disable WLAN suspend
resume test framework and enable it in engineering builds on need basis.
Change-Id: If1e23ed41987a1f8b40cfae6504f6b69f8a06932
CRs-Fixed: 1055093
WLAN suspend/resume feature has tight dependency on APPS platform
suspend/resume support. On new targets APPS suspend/resume is not
supported until target is feature complete. In absence of APPS
suspend/resume support testing WLAN offload features become
difficult. Add unit test framework to test WLAN suspend/resume
features using private IOCTL command by simulating APPS
suspend/resume behaviour.
Trigger WLAN suspend:
iwpriv wlan0 wlan_suspend 0 0
To resume WLAN run a ping test from access point side and very 1st
ping request unicast packet should trigger wake up.
If FW is not waking up APPS then use below command to do a manual
wake up:
Trigger WLAN resume:
iwpriv wlan0 wlan_resume 0 0
This unit test framework is only for SNOC.
Change-Id: I177a0047f460aa2a305a9e4e46fbfaa94a81dced
CRs-Fixed: 1042205
Kbuild contains several macros in CDEFINES that are no longer used
Removed these macros from Kbuild file
Change-Id: Ib34ada0b2a07b9d428e9b29ad13ce5fe0302d461
CRs-Fixed: 1023225
Currently in HDD the WLAN_FEATURE_LPSS code is distributed amongst
multiple source files. In order to be more aligned with established
practices refactor most of the feature code into a feature-specific
file .
Change-Id: I7c743f32fd1455fc253a00d69bfc9abb7f6743da
CRs-Fixed: 1018553
Add new files for supporting NAN data path feature.
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: If12d15789659d04559a9d65d6b7016d4cc595fcf
Disable FEATURE_MEMDUMP in Kbuild.
FEATURE_MEMDUMP should be redesigned appropriately for
cld-3.0. Disable this feature until implementation is
complete.
Change-Id: I3190414ff32d8a75b07c2c311e257f4d388ef26d
CRs-Fixed: 1026747
Add ini parameter and feature flag for
DPTRACE to enable/disable as per requirement.
Change-Id: I80db65adb7b8e82d5ea75cceac742fd229d7a2b5
CRs-Fixed: 1008087
This enables the tracking of posted rx ring buffers. With this we can
identify if host/fw is wrong when we hit below issue:
"wlan: [0:E :QDF] rx hash: htt_rx_hash_list_lookup: no entry found for"
<physical address>
Change-Id: Ib973a2e2a69e881beddea23cdc1d2d994eeb1e12
CRs-Fixed: 864569
Add BMI and firmware download support for sdio bus platform.
Refactor fw and bmi download routines to get rid of compile
time bus specific macro.
Refactor allocation and free routines for high latency bus.
CRs-Fixed: 969334
Change-Id: I2c217891d0ca4b503e7388b3ebe2f787e8325af5
Update TSF feature for vendor command QCA_NL80211_VENDOR_SUBCMD_TSF
to support TSF operations.
Change-Id: I89abf14b9b7d8ee8fe1c12f7684c87e4dee9bfb0
CRs-fixed: 997799
Clean up bmi_2 related code. These code are hardware/platform
specific which is no longer supported.
CRs-Fixed: 1001252
Change-Id: I783f4a411044268d24ba660ce9f10dabe0cce8bf
qcacld-2.0 to qcacld-3.0 propagation
Get tsf from fw. Provide ioctl interface cap_tsf/get_tsf.
Driver issue wmi cmd to fw to realize capture/get.
It can be used in station and softap mode. For sta, getting
tsf from connected ap. For softap, it will generate tsf by-
self
Change-Id: I00d30882bce2f49ee3de3fa189e094c04c0d9943
CRs-Fixed: 817527
PLD stands for platform driver. It is a interface between CLD and
CNSS/ICNSS. It hides the CNSS/ICNSS APIs from CLD and provides a set
of common APIs.
Other modules should include pld_common.h if they want to call PLD
APIs.
CRs-Fixed: 979275
Change-Id: I3571fc70f502dc367c65f13b412cd5d37ee41d3c