Commit Graph

513 Commits

Author SHA1 Message Date
Ingo Molnar
2b4fa851b2 Merge branch 'x86/numa' into x86/devel
Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/e820.c
	arch/x86/kernel/efi_64.c
	arch/x86/kernel/mpparse.c
	arch/x86/kernel/setup.c
	arch/x86/kernel/setup_32.c
	arch/x86/mm/init_64.c
	include/asm-x86/proto.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 11:59:23 +02:00
Mike Travis
23ca4bba3e x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU".  This is
    used by some per_cpu variables that are initialized and accessed
    before there are per_cpu areas allocated.

    ["Early" in respect to per_cpu variables is "earlier than the per_cpu
    areas have been setup".]

    This patchset adds these new macros:

	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
	EXPORT_EARLY_PER_CPU_SYMBOL(_name)
	DECLARE_EARLY_PER_CPU(_type, _name)

	early_per_cpu_ptr(_name)
	early_per_cpu_map(_name, _idx)
	early_per_cpu(_name, _cpu)

    The DEFINE macro defines the per_cpu variable as well as the early
    map and pointer.  It also initializes the per_cpu variable and map
    elements to "_initvalue".  The early_* macros provide access to
    the initial map (usually setup during system init) and the early
    pointer.  This pointer is initialized to point to the early map
    but is then NULL'ed when the actual per_cpu areas are setup.  After
    that the per_cpu variable is the correct access to the variable.

    The early_per_cpu() macro is not very efficient but does show how to
    access the variable if you have a function that can be called both
    "early" and "late".  It tests the early ptr to be NULL, and if not
    then it's still valid.  Otherwise, the per_cpu variable is used
    instead:

	#define early_per_cpu(_name, _cpu) 			\
		(early_per_cpu_ptr(_name) ?			\
			early_per_cpu_ptr(_name)[_cpu] :	\
			per_cpu(_name, _cpu))

    A better method is to actually check the pointer manually.  In the
    case below, numa_set_node can be called both "early" and "late":

	void __cpuinit numa_set_node(int cpu, int node)
	{
	    int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);

	    if (cpu_to_node_map)
		    cpu_to_node_map[cpu] = node;
	    else
		    per_cpu(x86_cpu_to_node_map, cpu) = node;
	}

  * Add a flag "arch_provides_topology_pointers" that indicates pointers
    to topology cpumask_t maps are available.  Otherwise, use the function
    returning the cpumask_t value.  This is useful if cpumask_t set size
    is very large to avoid copying data on to/off of the stack.

  * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
    the non-debug case has been optimized a bit.

  * Remove an unreferenced compiler warning in drivers/base/topology.c

  * Clean up #ifdef in setup.c

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-08 11:31:20 +02:00
Ingo Molnar
6924d1ab8b Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', 'x86/build', 'x86/cleanups', 'x86/cpa', 'x86/cpu', 'x86/defconfig', 'x86/gart', 'x86/i8259', 'x86/intel', 'x86/irqstats', 'x86/kconfig', 'x86/ldt', 'x86/mce', 'x86/memtest', 'x86/pat', 'x86/ptemask', 'x86/resumetrace', 'x86/threadinfo', 'x86/timers', 'x86/vdso' and 'x86/xen' into x86/devel 2008-07-08 09:16:56 +02:00
John Blackwood
2d5c1be887 mm: switch node meminfo Active & Inactive pages to Kbytes
There is a bug in the output of /sys/devices/system/node/node[n]/meminfo
where the Active and Inactive values are in pages instead of Kbytes.

Looks like this occurred back in 2.6.20 when the code was changed
over to use node_page_state().

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:09 -07:00
Randy Dunlap
4623236619 dev_set_name: fix missing kernel-doc
Fix kernel-doc for new dev_set_name() function:

Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11 16:50:40 -07:00
Stephen Rothwell
413c239fad driver-core: prepare for 2.6.27 api change by adding dev_set_name
Create the dev_set_name function now so that various subsystems can
start changing over to it before other changes in 2.6.27 will make it
compulsory.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-29 21:10:01 -07:00
Jan Beulich
63687a528c x86: move tracedata to RODATA
.. allowing it to be write-protected just as other read-only data
under CONFIG_DEBUG_RODATA.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 07:09:47 +02:00
Linus Torvalds
e616c63033 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  pktgen: make sure that pktgen_thread_worker has been executed
  [VLAN]: Propagate selected feature bits to VLAN devices
  drivers/atm/: remove CVS keywords
  vlan: Correctly handle device notifications for layered VLAN devices
  net: Fix call to ->change_rx_flags(dev, IFF_MULTICAST) in dev_change_flags()
  net_sched: cls_api: fix return value for non-existant classifiers
  ipsec: Use the correct ip_local_out function
  ipv6 addrconf: Allow infinite prefix lifetime.
  ipv6 route: Fix lifetime in netlink.
  ipv6 addrconf: Fix route lifetime setting in corner case.
  ndisc: Add missing strategies for per-device retrans timer/reachable time settings.
  ipv6: Move <linux/in6.h> from header-y to unifdef-y.
  l2tp: avoid skb truesize bug if headroom is increased
  wireless: Create 'device' symlink in sysfs
  wireless, airo: waitbusy() won't delay
  libertas: fix command timeout after firmware failure
  mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
  mac80211 : Association with 11n hidden ssid ap.
  hostap: fix "registers" registration in procfs
  isdn/capi: Return proper errnos on module init.
  ...
2008-05-20 17:23:03 -07:00
Greg Kroah-Hartman
8882b39421 Driver core: add device_create_vargs and device_create_drvdata
We want to have the drvdata field set properly when creating the device
as sysfs callbacks can assume it is present and it can race the later
setting of this field.

So, create two new functions, deviec_create_vargs() and
device_create_drvdata() that take this new field.

device_create_drvdata() will go away in 2.6.27 as the drvdata field will
just be moved to the device_create() call as it should be.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20 13:31:53 -07:00
Linus Torvalds
a442ac512f Clean up 'print_fn_descriptor_symbol()' types
Everybody wants to pass it a function pointer, and in fact, that is what
you _must_ pass it for it to make sense (since it knows that ia64 and
ppc64 use descriptors for function pointers and fetches the actual
address from there).

So don't make the argument be a 'unsigned long' and force everybody to
add a cast.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-15 17:50:37 -07:00
Stephen Hemminger
0599ad53fe sysfs: remove error messages for -EEXIST case
It is possible that the entry in sysfs already exists, one case of this is
when a network device is renamed to bonding_masters. Anyway, in this case
the proper error path is for device_rename to return an error code, not to
generate bogus backtrace and errors.

Also, to avoid possible races, the create link should be done before the
remove link. This makes a device rename atomic operation like other renames.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-14 22:34:16 -07:00
Linus Torvalds
fc99824c42 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  Driver core: struct class remove children list
  block: do_mounts - accept root=<non-existant partition>
2008-05-14 11:13:44 -07:00
Dave Young
0a3ad00ca0 Driver core: struct class remove children list
because of the class_device was removed, now do the children list removing

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-14 10:37:58 -07:00
Linus Torvalds
6aa5fc4349 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (73 commits)
  net: Fix typo in net/core/sock.c.
  ppp: Do not free not yet unregistered net device.
  netfilter: xt_iprange: module aliases for xt_iprange
  netfilter: ctnetlink: dump conntrack ID in event messages
  irda: Fix a misalign access issue. (v2)
  sctp: Fix use of uninitialized pointer
  cipso: Relax too much careful cipso hash function.
  tcp FRTO: work-around inorder receivers
  tcp FRTO: Fix fallback to conventional recovery
  New maintainer for Intel ethernet adapters
  DM9000: Use delayed work to update MII PHY state
  DM9000: Update and fix driver debugging messages
  DM9000: Add __devinit and __devexit attributes to probe and remove
  sky2: fix simple define thinko
  [netdrvr] sfc: sfc: Add self-test support
  [netdrvr] sfc: Increment rx_reset when reported as driver event
  [netdrvr] sfc: Remove unused macro EFX_XAUI_RETRAIN_MAX
  [netdrvr] sfc: Fix code formatting
  [netdrvr] sfc: Remove kernel-doc comments for removed members of struct efx_nic
  [netdrvr] sfc: Remove garbage from comment
  ...
2008-05-14 10:08:24 -07:00
Hannes Hering
3c82c30cd5 memory: Introduce exports for memory notifiers
This patch introduces two exports to allow modules to use memory notifiers.

Signed-off-by: Hannes Hering <hering2@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:38 -04:00
OGAWA Hirofumi
db176c6ed8 Fix bogus warning in sysdev_driver_register()
if ((drv->entry.next != drv->entry.prev) ||
            (drv->entry.next != NULL)) {

warns list_empty(&drv->entry).

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Greg KH <gregkh@suse.de>
Cc: Len Brown <lenb@kernel.org>
[ Version 2 totally redone based on suggestions from Linus & Greg ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-06 13:22:42 -07:00
Mike Travis
e37d05dad7 cpu: change cpu_sys_devices from array to per_cpu variable
Change cpu_sys_devices from array to per_cpu variable in drivers/base/cpu.c.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:04:02 -07:00
Kay Sievers
c3b19ff06e driver core: remove no longer used "struct class_device"
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30 16:52:49 -07:00
Stas Sergeev
16dc42e018 driver core: warn about duplicate driver names on the same bus
Currently an attempt to register multiple
drivers with the same name causes the
stack trace with some cryptic error message.
The attached patch adds the necessary check
and the clear error message.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30 16:52:47 -07:00
Miklos Szeredi
fc3ba692a4 mm: Add NR_WRITEBACK_TEMP counter
Fuse will use temporary buffers to write back dirty data from memory mappings
(normal writes are done synchronously).  This is needed, because there cannot
be any guarantee about the time in which a write will complete.

By using temporary buffers, from the MM's point if view the page is written
back immediately.  If the writeout was due to memory pressure, this
effectively migrates data from a full zone to a less full zone.

This patch adds a new counter (NR_WRITEBACK_TEMP) for the number of pages used
as temporary buffers.

[Lee.Schermerhorn@hp.com: add vmstat_text for NR_WRITEBACK_TEMP]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:50 -07:00
Linus Torvalds
5f78e4d339 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci:
  x86: add pci=check_enable_amd_mmconf and dmi check
  x86: work around io allocation overlap of HT links
  acpi: get boot_cpu_id as early for k8_scan_nodes
  x86_64: don't need set default res if only have one root bus
  x86: double check the multi root bus with fam10h mmconf
  x86: multi pci root bus with different io resource range, on 64-bit
  x86: use bus conf in NB conf fun1 to get bus range on, on 64-bit
  x86: get mp_bus_to_node early
  x86 pci: remove checking type for mmconfig probe
  x86: remove unneeded check in mmconf reject
  driver core: try parent numa_node at first before using default
  x86: seperate mmconf for fam10h out from setup_64.c
  x86: if acpi=off, force setting the mmconf for fam10h
  x86_64: check MSR to get MMCONFIG for AMD Family 10h
  x86_64: check and enable MMCONFIG for AMD Family 10h
  x86_64: set cfg_size for AMD Family 10h in case MMCONFIG
  x86: mmconf enable mcfg early
  x86: clear pci_mmcfg_virt when mmcfg get rejected
  x86: validate against acpi motherboard resources

Fixed up fairly trivial conflicts in arch/x86/pci/{init.c,pci.h} due to
OLPC support manually.
2008-04-29 08:26:51 -07:00
Ciaran McCreesh
9a3be324e3 firmware loader: printk when requesting firmware
Before requesting firmware, printk a message saying what we're requesting. This
makes it easier to see what's going on, and provides an explanation for the
huge silent delay that one would otherwise get after accidentally building
ipw2200 as a non-module.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:05 -07:00
Yinghai Lu
0d358f22f6 driver core: try parent numa_node at first before using default
in the device_add, we try to use use parent numa_node.
need to make sure pci root bus's bridge device numa_node is set.
then we could use device->numa_node direclty for all device.
and don't need to call pcibus_to_node().

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 23:41:04 +02:00
Rafael J. Wysocki
29591b92e1 bus_remove_device: be more careful about incomplete initialization
Prevent bus_remove_device() from crashing if dev->knode_bus has not been
initialized before it's called.

This can happen if the device_add() ended up breaking out early due to
an error, for example.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-22 17:40:36 -07:00
Rafael J. Wysocki
08119e8966 Relax check on adding children of suspended devices
Do not refuse to actually register children of suspended devices,
but still warn about attempts to do that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-22 17:19:11 -07:00
Linus Torvalds
e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Linus Torvalds
429f731dea Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  Deprecate the asm/semaphore.h files in feature-removal-schedule.
  Convert asm/semaphore.h users to linux/semaphore.h
  security: Remove unnecessary inclusions of asm/semaphore.h
  lib: Remove unnecessary inclusions of asm/semaphore.h
  kernel: Remove unnecessary inclusions of asm/semaphore.h
  include: Remove unnecessary inclusions of asm/semaphore.h
  fs: Remove unnecessary inclusions of asm/semaphore.h
  drivers: Remove unnecessary inclusions of asm/semaphore.h
  net: Remove unnecessary inclusions of asm/semaphore.h
  arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21 15:41:27 -07:00
Tony Jones
ee959b00c3 SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:33 -07:00
Harvey Harrison
2b3a302a09 driver core: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:29 -07:00
Rafael J. Wysocki
b844eba292 PM: Remove destroy_suspended_device()
After 2.6.24 there was a plan to make the PM core acquire all device
semaphores during a suspend/hibernation to protect itself from
concurrent operations involving device objects.  That proved to be
too heavy-handed and we found a better way to achieve the goal, but
before it happened, we had introduced the functions
device_pm_schedule_removal() and destroy_suspended_device() to allow
drivers to "safely" destroy a suspended device and we had adapted some
drivers to use them.  Now that these functions are no longer necessary,
it seems reasonable to remove them and modify their users to use the
normal device unregistration instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:28 -07:00
Greg Kroah-Hartman
3f62e5700b Driver core: make device_is_registered() work for class devices
device_is_registered() can use the kobject value for this, so it will
now work with devices that are associated with only a class, not a bus
and a driver.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:26 -07:00
Alan Stern
d288e47c47 PM: Make wakeup flags available whenever CONFIG_PM is set
The various wakeup flags and their accessor macros in struct
dev_pm_info should be available whenever CONFIG_PM is enabled, not
just when CONFIG_PM_SLEEP is on.  Otherwise remote wakeup won't always
be configurable for runtime power management.  This patch (as1056b)
fixes the oversight.

David Brownell adds:
	More accurately, fixes the "regression" ... as noted sometime
	last summer, after 296699de6b
	introduced CONFIG_SUSPEND.  But that didn't make the regression
	list for that kernel, ergo the delay in fixing it.

[rjw: rebased]

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:25 -07:00
Rafael J. Wysocki
57eee3d23e Driver core: Call device_pm_add() after bus_add_device() in device_add()
Include dpm_sysfs_add() into device_pm_add(), in analogy with
device_pm_remove(), and modify device_add() to call the latter after
bus_add_device(), to avoid situations in which the PM core may
attempt to suspend a device the registration of which has not been
successful.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:24 -07:00
Rafael J. Wysocki
58aca23226 PM: Handle device registrations during suspend/resume
Modify the PM core to protect its data structures, specifically the
dpm_active list, from being corrupted if a child of the currently
suspending device is registered concurrently with its ->suspend()
callback.  In that case, since the new device (the child) is added
to dpm_active after its parent, the PM core will attempt to
suspend it after the parent, which is wrong.

Introduce a new member of struct dev_pm_info, called 'sleeping',
and use it to check if the parent of the device being added to
dpm_active has been suspended, in which case the device registration
fails.  Also, use 'sleeping' for checking if the ordering of devices
on dpm_active is correct.

Introduce variable 'all_sleeping' that will be set to 'true' once all
devices have been suspended and make new device registrations fail
until 'all_sleeping' is reset to 'false', in order to avoid having
unsuspended devices around while the system is going into a sleep state.

Remove pm_sleep_rwsem which is not necessary any more.

Special thanks to Alan Stern for discussions and suggestions that
lead to the creation of this patch.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:24 -07:00
Ben Dooks
da009f39f8 sysdev: detect multiple driver registrations
I've just found how easy it is to accidentally register a sysdev_driver for
two different classes.  When this happens, bad things happen as the
sysdev_driver structure keeps has the list entry for the driver
registration.

The following patch makes a WARN_ON() if this happens, although I think
BUG_ON or returning -EAGAIN could also be valid responses to this.

Signed-off-by: Ben Dooks <ben@fluff.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:24 -07:00
Sam Ravnborg
6c847402e1 driver core: cpu: fix section mismatch in cpu.c:store_online
Fix following warning:
WARNING: vmlinux.o(.text+0x64609c): Section mismatch in reference from the function store_online() to the function .cpuinit.text:cpu_up()

store_online() is defined inside a HOTPLUG_CPU block so references are OK. 
Ignore references by annotating store_online() with __ref.

Note: This is needed because cpu_up() most likely should not have been
__cpuinit but all the hotplug cpu code misuses the __cpuinit annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:23 -07:00
Pavel Machek
35d313b874 power_state: remove it from driver core
power_state is scheduled for removal, and it is used only for debug
prints by driver core. Remove it.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:23 -07:00
Badari Pulavarty
00a41db522 driver core: register_memory/unregister_memory clean ups and bugfix
register_memory()/unregister_memory() never gets called with
"root". unregister_memory() is accessing kobject_name of
the object just freed up. Since no one uses the code,
lets take the code out. And also, make register_memory() static.

Another bug fix - before calling unregister_memory()
remove_memory_block() gets a ref on kobject. unregister_memory()
need to drop that ref before calling sysdev_unregister().

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:19 -07:00
Daniel Walker
da19cbcf71 driver core: memory: semaphore to mutex
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:19 -07:00
Mike Travis
9d1fe3236a cpumask: add show cpu map functions
* Add cpu_sysdev_class functions to display the following maps
    with cpulist_scnprintf().

	cpu_online_map
	cpu_present_map
	cpu_possible_map

  * Small change to include/linux/sysdev.h to allow the attribute
    name and label to be different (to avoid collision with the
    "attr_online" entry for bringing cpus on- and off-line.)

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Mike Travis
39106dcf85 cpumask: use new cpus_scnprintf function
* Cleaned up references to cpumask_scnprintf() and added new
    cpulist_scnprintf() interfaces where appropriate.

  * Fix some small bugs (or code efficiency improvments) for various uses
    of cpumask_scnprintf.

  * Clean up some checkpatch errors.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Mike Travis
c5f59f0833 nodemask: use new node_to_cpumask_ptr function
* Use new node_to_cpumask_ptr.  This creates a pointer to the
    cpumask for a given node.  This definition is in mm patch:

	asm-generic-add-node_to_cpumask_ptr-macro.patch

  * Use new set_cpus_allowed_ptr function.

Depends on:
	[mm-patch]: asm-generic-add-node_to_cpumask_ptr-macro.patch
	[sched-devel]: sched: add new set_cpus_allowed_ptr function
	[x86/latest]: x86: add cpus_scnprintf function

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Greg Banks <gnb@melbourne.sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Matthew Wilcox
6188e10d38 Convert asm/semaphore.h users to linux/semaphore.h
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:22:54 -04:00
James Bottomley
2f3edc6936 [SCSI] transport_class: BUG if we can't release the attribute container
Every current transport class calls transport_container_release but
ignores the return value.  This is catastrophic if it returns an error
because the containers are part of a global list and the next action of
almost every transport class is to free the memory used by the
container.

Fix this by making transport_container_release a void, but making it BUG
if attribute_container_release returns an error ... this catches the
root cause of a system panic much earlier.  If we don't do this, we get
an eventual BUG when the attribute container list notices the corruption
caused by the freed memory it's still referencing.

Also made attribute_container_release __must_check as a reminder.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Jesper Juhl
d478376cb0 driver core: fix small mem leak in driver_add_kobj()
The Coverity checker spotted that we leak the storage allocated to 'name' in
int driver_add_kobj().  The leak looks legit to me - this is the code :

int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
                    const char *fmt, ...)
{
        va_list args;
        char *name;
        int ret;

        va_start(args, fmt);
        name = kvasprintf(GFP_KERNEL, fmt, args);
        ^^^^^^^^ This dynamically allocates space...

        va_end(args);

        if (!name)
                return -ENOMEM;

        return kobject_add(kobj, &drv->p->kobj, "%s", name);
	^^^^^^^^ This neglects to free the space allocated
}

Inside kobject_add() a copy of 'name' will be made and used.  As far as I can
see, Coverity is correct in flagging this as a leak, but I'd like some
configmation before the patch is applied.

This should fix it.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:45:23 -07:00
Andrew Morton
815d2d50da driver core: debug for bad dev_attr_show() return value.
Try to find the culprit who caused
http://bugzilla.kernel.org/show_bug.cgi?id=10150

Cc: <balajirrao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:33:49 -07:00
James Bottomley
e88a0c2ca8 drivers: fix dma_get_required_mask
There's a bug in the current implementation of dma_get_required_mask()
where it ands the returned mask with the current device mask.  This
rather defeats the purpose if you're using the call to determine what
your mask should be (since you will at that time have the default
DMA_32BIT_MASK).  This bug results in any driver that uses this function
*always* getting a 32 bit mask, which is wrong.

Fix by removing the and with dev->dma_mask.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:33:33 -07:00
Greg Kroah-Hartman
ef79df2630 sysdev: fix problem with sysdev_class being re-registered
We need to initialize the kobject for a sysdev_class as it could have
been recycled (stupid static kobjects...)

We also do the same thing in case sysdev devices are being
re-registered.

Thanks to Balaji Rao <balajirrao@gmail.com> for pointing out the
problem.

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:33:32 -07:00
Cornelia Huck
c1fe539a7e Driver core: Fix cleanup when failing device_add().
Driver core: Fix cleanup when failing device_add().

 - Don't call cleanup_device_parent() if we didn't call setup_parent().
 - dev->kobj.parent may be NULL when cleanup_device_parent() is called,
   so we need to handle glue_dir == NULL in cleanup_glue_dir().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:47:05 -08:00
Rafael J. Wysocki
135dee0cd0 driver core: Remove dpm_sysfs_remove() from error path of device_add()
Since device_pm_remove(dev) calls dpm_sysfs_remove(dev), it's
incorrect to call the latter after the former in the device_add()
error path.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:47:05 -08:00