Protected mode code may have corrupted the real-mode tss, so re-initialize
it when switching to real mode.
Signed-off-by: Avi Kivity <avi@qumranet.com>
With kernel-injected interrupts, we need to check for interrupts on
lightweight exits too.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
If the time stamp counter goes backwards, a guest delay loop can become
infinite. This can happen if a vcpu is migrated to another cpu, where
the counter has a lower value than the first cpu.
Since we're doing an IPI to the first cpu anyway, we can use that to pick
up the old tsc, and use that to calculate the adjustment we need to make
to the tsc offset.
Signed-off-by: Avi Kivity <avi@qumranet.com>
When a vcpu causes a shadow tlb entry to have reduced permissions, it
must also clear the tlb on remote vcpus. We do that by:
- setting a bit on the vcpu that requests a tlb flush before the next entry
- if the vcpu is currently executing, we send an ipi to make sure it
exits before we continue
Signed-off-by: Avi Kivity <avi@qumranet.com>
Switch guest paging context may require us to allocate memory, which
might fail. Instead of wiring up error paths everywhere, make context
switching lazy and actually do the switch before the next guest entry,
where we can return an error if allocation fails.
Signed-off-by: Avi Kivity <avi@qumranet.com>
MSR_EFER.LME/LMA bits are automatically save/restored by VMX
hardware, KVM only needs to save NX/SCE bits at time of heavy
weight VM Exit. But clearing NX bits in host envirnment may
cause system hang if the host page table is using EXB bits,
thus we leave NX bits as it is. If Host NX=1 and guest NX=0, we
can do guest page table EXB bits check before inserting a shadow
pte (though no guest is expecting to see this kind of gp fault).
If host NX=0, we present guest no Execute-Disable feature to guest,
thus no host NX=0, guest NX=1 combination.
This patch reduces raw vmexit time by ~27%.
Me: fix compile warnings on i386.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
In a lightweight exit (where we exit and reenter the guest without
scheduling or exiting to userspace in between), we don't need various
msrs on the host, and avoiding shuffling them around reduces raw exit
time by 8%.
i386 compile fix by Daniel Hecken <dh@bahntechnik.de>.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instructions with address size override prefix opcode 0x67
Cause the #SS fault with 0 error code in VM86 mode. Forward
them to the emulator.
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
kunmap() expects a struct page, not a virtual address. Fixes an oops loading
kvm-intel.ko on i386 with CONFIG_HIGHMEM.
Thanks to Michael Ivanov <deruhu@peterstar.ru> for reporting.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The real mode tr needs to be set to a specific tss so that I/O
instructions can function. Divert the new tr values to the real
mode save area from where they will be restored on transition to
protected mode.
This fixes some crashes on reboot when the bios accesses an I/O
instruction.
Signed-off-by: Avi Kivity <avi@qumranet.com>
If we set an msr via an ioctl() instead of by handling a guest exit, we
have the host state loaded, so reloading the msrs would clobber host
state instead of guest state.
This fixes a host oops (and loss of a cpu) on a guest reboot.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Everyone owns a piece of the exception bitmap, but they happily write to
the entire thing like there's no tomorrow. Centralize handling in
update_exception_bitmap() and have everyone call that.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The lightweight vmexit path avoids saving and reloading certain host
state. However in certain cases lightweight vmexit handling can schedule()
which requires reloading the host state.
So we store the host state in the vcpu structure, and reloaded it if we
relinquish the vcpu.
Signed-off-by: Avi Kivity <avi@qumranet.com>
i386 wants fs for accessing the pda even on a lightweight exit, so ensure
we can always restore it. This fixes a regression on i386 introduced by
the lightweight vmexit patch.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Many msrs and the like will only be used by the host if we schedule() or
return to userspace. Therefore, we avoid saving them if we handle the
exit within the kernel, and if a reschedule is not requested.
Based on a patch from Eddie Dong <eddie.dong@intel.com> with a couple of
fixes by me.
Signed-off-by: Yaozu(Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch enables IO bitmaps control on vmx and unmask the 0x80 port to
avoid VMEXITs caused by accessing port 0x80. 0x80 is used as delays (see
include/asm/io.h), and handling VMEXITs on its access is unnecessary but
slows things down. This patch improves kernel build test at around
3%~5%.
Because every VM uses the same io bitmap, it is shared between
all VMs rather than a per-VM data structure.
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The lazy fpu changes did not take into account that some vmexit handlers
can sleep. Move loading the guest state into the inner loop so that it
can be reloaded if necessary, and move loading the host state into
vmx_vcpu_put() so it can be performed whenever we relinquish the vcpu.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Fix following section mismatch warning in kvm-intel.o:
WARNING: o-i386/drivers/kvm/kvm-intel.o(.init.text+0xbd): Section mismatch: reference to .exit.text: (between 'hardware_setup' and 'vmx_disabled_by_bios')
The function free_kvm_area is used in the function alloc_kvm_area which
is marked __init.
The __exit area is discarded by some archs during link-time if a
module is built-in resulting in an oops.
Note: This warning is only seen by my local copy of modpost
but the change will soon hit upstream.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only save/restore the FPU host state when the guest is actually using the
FPU.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Set all of the host mask bits for CR0 so that we can maintain a proper
shadow of CR0. This exposes CR0.TS, paving the way for lazy fpu handling.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Make the exit statistics per-vcpu instead of global. This gives a 3.5%
boost when running one virtual machine per core on my two socket dual core
(4 cores total) machine.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Intel hosts only support syscall/sysret in long more (and only if efer.sce
is enabled), so only reload the related MSR_K6_STAR if the guest will
actually be able to use it.
This reduces vmexit cost by about 500 cycles (6400 -> 5870) on my setup.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Some msrs are only used by x86_64 instructions, and are therefore
not needed when the guest is legacy mode. By not bothering to switch
them, we reduce vmexit latency by 2400 cycles (from about 8800) when
running a 32-bt guest on a 64-bit host.
Signed-off-by: Avi Kivity <avi@qumranet.com>
THe automatically switched msrs are never changed on the host (with
the exception of MSR_KERNEL_GS_BASE) and thus there is no need to save
them on every vm entry.
This reduces vmexit latency by ~400 cycles on i386 and by ~900 cycles (10%)
on x86_64.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The expression
sp - 6 < sp
where sp is a u16 is undefined in C since 'sp - 6' is promoted to int,
and signed overflow is undefined in C. gcc 4.2 actually warns about it.
Replace with a simpler test.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Mapping a guest page to a host page is a common operation. Currently,
one has first to find the memory slot where the page belongs (gfn_to_memslot),
then locate the page itself (gfn_to_page()).
This is clumsy, and also won't work well with memory aliases. So simplify
gfn_to_page() not to require memory slot translation first, and instead do it
internally.
Signed-off-by: Avi Kivity <avi@qumranet.com>
As usual, we need to mangle segment registers when emulating real mode
as vm86 has specific constraints. We special case the reset segment base,
and set the "access rights" (or descriptor flags) to vm86 comaptible values.
This fixes reboot on vmx.
Signed-off-by: Avi Kivity <avi@qumranet.com>
set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).
Signed-off-by: Avi Kivity <avi@qumranet.com>
The reset state has cs.selector == 0xf000 and cs.base == 0xffff0000,
which aren't compatible with vm86 mode, which is used for real mode
virtualization.
When we create a vcpu, we set cs.base to 0xf0000, but if we get there by
way of a reset, the values are inconsistent and vmx refuses to enter
guest mode.
Workaround by detecting the state and munging it appropriately.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions. This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.
Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there. The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This is redundant, as we also return -EINTR from the ioctl, but it
allows us to examine the exit_reason field on resume without seeing
old data.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently, userspace is told about the nature of the last exit from the
guest using two fields, exit_type and exit_reason, where exit_type has
just two enumerations (and no need for more). So fold exit_type into
exit_reason, reducing the complexity of determining what really happened.
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM used to handle cpuid by letting userspace decide what values to
return to the guest. We now handle cpuid completely in the kernel. We
still let userspace decide which values the guest will see by having
userspace set up the value table beforehand (this is necessary to allow
management software to set the cpu features to the least common denominator,
so that live migration can work).
The motivation for the change is that kvm kernel code can be impacted by
cpuid features, for example the x86 emulator.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently when passing the a PIO emulation request to userspace, we
rely on userspace updating %rax (on 'in' instructions) and %rsi/%rdi/%rcx
(on string instructions). This (a) requires two extra ioctls for getting
and setting the registers and (b) is unfriendly to non-x86 archs, when
they get kvm ports.
So fix by doing the register fixups in the kernel and passing to userspace
only an abstract description of the PIO to be done.
Signed-off-by: Avi Kivity <avi@qumranet.com>
