Modify wmi layer API calls with respect to new common wmi layer.
Register all wmi service events using standard wmi event register API.
Remove TLV formation of common API from wma layer.
Pass rx scheduling context of wmi events during event registration.
CRs-Fixed: 976998
Change-Id: Id490db96c28778ec371dd633d43dfa002c08c16a
qcacld-2.0 to qcacld-3.0 propagation.
Rename enumeration associated with scan types.
WMI interface files shared between host and Firmware have
the same macro defined resulting in compilaiton issue. Hence
renaming these enumeration with LIM prefix.
Change-Id: Ia196b8e4bb582490a9f957b8cdf1e3a12c4fbde0
CRs-Fixed: 981355
Reduce the api footprint of hif and make hif responsible for controlling
its own timer as part of suspend resume.
Change-Id: Ifdcc95f65cd56e5987d961c01c4e35a9a93787f7
CRs-Fixed: 986480
Praprogation from qcacld-3.0 to qcacld-3.1.
Change skb->sb such that it is overlayed between tx
and rx and each one of then still fits 48 bytes.
Note that this will break IPA and it will be fixed
subsequently by another change.
Change-Id: I96168aee99dbdbecbdbd4259597e179b02d29f5d
CRs-Fixed: 881090
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
Max_peers configuration is needed only by WMA. Remove dependency of
ol layer for max_peers and move it WMA.
Change-Id: I336b02ae84c72c70ca459425b38b197e5fe551a0
CRs-Fixed: 967765
Refactor Transport Layer from cds_get_context and pass the hif context
to all the API's to operate.
Change-Id: I2fb376fda12951a77007f46ceb351bb2e7740ace
CRs-Fixed: 967765
Suspend type should be CDF_SYSTEM_SUSPEND. Host gets
stuck while trying to post runtime suspend messages.
Change-Id: I5deeba401b7bda2a057802389d620149a92fcfbc
CRs-Fixed: 970656
Use single channel scan request for preauth operation, similar to
remain-on-channel. Remove all roaming preauth logic from WMA.
Change-Id: Ie3783306e0ff5b8a5bbcb6437e982590b03fe040
CRs-Fixed: 957094
qcacld-2.0 to qcacld-3.0 propagation
Add support to handle an error indicated by the fw in offload mode.
In this case - MIC error type.
Change-Id: I53363bdbaafad7fab0a6e067a43892a3066abbb6
CRs-Fixed: 791274
Add support to use fine timing measurement capabilities coming
from the Firmware.
Currently INI config is being used for setting initiator
and responder roles. With this change, intersection of INI
config and FW indicated capability will be used.
Change-Id: If20bc8de2b6ec12bc638b75806e2a870a5ebc189
CRs-Fixed: 942290
- Add handler for the vdev delete and peer delete response at WMA.
- As part of timeout handler, assert if the response is not
received in 3 seconds.
Change-Id: I7b20254013266414174f686e1f3918822adc65d8
CRs-fixed: 960173
Introduce DFS-3 support changes in DFS layer.
Add support for per segment based queuing, processing
and pattern matching of the radar events in 80+80 channel
width mode, when both segments are dfs.
Also, add support for parsing the new DFS-3 radar summary
report and extract the segment ID on which a phyerror is
seen. Report the segment ID on which the radar has been
detected to the WMA layer to add only radar detected 80MHz
segment channels to be added to NOL in 80+80 MHz channel
width mode.
Change-Id: Ib9ed2122844cef5fde2b632accc8c798e86bf7a3
CRs-Fixed: 964262
Adding support for parsing the WMI_PHYERR_EVENTID
for DFS-3 in WMA event handler. Configure the hw
board id to DFS module fetched from the wmi service
ready event.
Change-Id: I003fab790c7f46b54e5d41bcf1bbfa16f0cdc722
CRs-Fixed: 964262
Fix memory leak in case of txrx_fw_st_rst command where
we are not expecting any response from firmware.
CRs-Fixed: 964465
Change-Id: Iad91cb5557ef167d126ef68e07f02445ad7a0b97
Rename API cds_is_load_unload_in_progress() to
cds_is_load_or_unload_in_progress() for clarity purpose.
Change-Id: I209c661ccee760f822d5df53577d822f3c741b37
CRs-Fixed: 964217
Remove typedef tPowerdBm. Rename and use linux style for channel
enum, channel state, channel power and country source data
structures.
Change-Id: Iebc59e6f001ccdb403c7445f4cea02c6a8141366
CRs-Fixed: 856727
Check runtime pm status while sending messages.
Update runtime pm when sending messages to hif.
Update runtime pm when messages are tx completed.
Change-Id: I27840f57ff87d6d27b1e3611e7fe1f2cd933ddd0
CRs-Fixed: 935300
wma has to do some extra steps that were part of 802.11 suspend
for runtime suspend.
Change-Id: I91fbdcacd6c557f30e0d4f422324f2db67cb96dc
CRs-Fixed: 935300
Send one suspend indication message to wma after configuring
all the offloads. Reduce context switches and complexity.
Change-Id: I020fc8864dbf7378805361d54dc6cff60b2652e5
CRs-Fixed: 935297
Remove the CB mode usage in channel bonding since the center
center frequency is calculated using channel width and channel
number.
Change-Id: Ie9685a833750bf3b69cce40c5d9587fb9b232047
CRs-Fixed: 962174
The current roam sync propagation for LFR3.0 in the host driver is
based on queuing and message processing mechanism. This can lead
to many unknown sequence of operations as there might be other
messages sitting in the queue which may interrupt with this
operation. Hence, it would be good to introduce a callback mechanism
which take care of running the code to execution completely in case
of roam synch propagation.
It also improves to reduce the roam delay by 50 percent as compared
to the existing mechanism.
CRs-Fixed: 962290
Change-Id: I4af569b1e3020a64beb606e8bbffd7613775138f
qcacld-2.0 to qcacld-3.0 propagation
During SSR, since VDEV detach won't happen, some contexts saved in VDEV
may not get a chance to be freed. Add change to check these contexts
in SSR shutdown routine to make sure they are freed.
Change-Id: I36d12b3bb524ca107ece2441c1dc1d80293cb31b
CRs-fixed: 957587
If DBS hwmode is not available from FW, return accrodingly in
wma_get_hw_mode_from_idx.
Change-Id: I603edd8a49bfd584300dcfc21c2b3c8c4c3c1892
CRs-Fixed: 934012
wma_suspend_req is rewritten in changes
I020fc8864dbf7378805361d54dc6cff60b2652e5
and I95876979652ab16976f23561038c877cee4c930a
Revert "qcacld-3.0: Fix the PNO WoW is not configured in concurrency case"
This reverts commit 3bf7846a5ee12e0641f90b9ff05a80a068cde777.
Revert "qcacld-3.0: Cleanup WOW_NLO_SCAN_COMPLETE_EVENT"
This reverts commit 8098644b8cbf89f23442c5bef02f186460cd9f8f.
Revert "qcacld-3.0: Find extscan_in_progress irrespective of connected or pno"
This reverts commit 7bb7f564b75965bfbf09fef6b5406aaa19c245a7.
Change-Id: If0953ad7ca8d7224c87f026e77d1a3f256c4f124
CRs-Fixed: 935297
The api is clearer without the abreviation. The api is
cleaner without an unused cdf_handle. Also remove
unnecessary cdf_schedule_work api. cdf_create_work
is also cleaner without cdf_handle.
Change-Id: Id8c32596a92184d6768e2bc3210c308b44da2a57
CRs-Fixed: 935297
Driver state of loading, unloading, logp are maintained in
multiple modules like HDD, CDS. Change to maintain the driver
state in CDS and provide CDS APIs to find out the state of the
driver so that any of the module can query it.
Also rename the logp to recovery in progress for clarity purpose.
Change-Id: I8e1864e1bc7f3b1dd6f4eb804ce2578c6695967d
CRs-fixed: 958659
Add event handler for oem data response event from FW.
Add new boolean member to differentiate the response
generated internally and one coming from the FW.
Change-Id: Ia906c5dcbb7e560fd78ccd96fc47c7801b33aa6a
CRs-Fixed: 942261
Do not allocate txrx descriptors for management
if management over WMI is enabled.
Change-Id: Iafb231bebe83b658940119ed13a41d64a10d4eb0
CRs-Fixed: 955450
