Commit Graph

755 Commits

Author SHA1 Message Date
Linus Torvalds
e86908614f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11 21:55:47 -07:00
Scott Wood
15f8c604a7 [POWERPC] cpm: Describe multi-user ram in its own device node.
The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 15:47:05 -05:00
Scott Wood
d948a29ea7 [POWERPC] cpm_uart: Issue STOP_TX command before initializing console.
This prevents some bootloader/bootwrapper characters from being lost.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood
c1dcfd9d19 [POWERPC] cpm_uart: sparse fixes
Mostly a bunch of direct access to in/out conversions, plus a few
cast removals, __iomem annotations, and miscellaneous cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood
7ae870368d [POWERPC] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.
The existing OF glue code was crufty and broken.  Rather than fix it,
it has been removed, and the serial driver now talks to the device tree
directly.

The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms
are dropped from arch/ppc (which will hopefully be soon), and existing
arch/powerpc boards that I wasn't able to test on for this patchset get
converted (which should be even sooner).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Grant Likely
e077b50c29 [POWERPC] Uartlite: Revert register io access changes
Reverts commit a15da8eff3

This driver is used by devices other than the xilinx opb-uartlite which
depend on bytewise access to the registers.  The change to 32 bit access
does not work on these devices.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:37:41 -05:00
Grant Likely
fb4e6e663b [POWERPC] Uartlite: Let the console be initialized earlier
By configuring it earlier we get console output sooner which is helpful
for debugging when the kernel crashes before the serial drivers are
initialized.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:16 -05:00
Grant Likely
852e1ea748 [POWERPC] Uartlite: Add of-platform-bus binding
Add of_platform bus binding so this driver can be used with arch/powerpc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely
435706b385 [POWERPC] Uartlite: Comment block tidy
Tidy the comments to split the driver into logical section; the main driver,
the console driver, the platform bus binding, and module initialization
and teardown.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely
8fa7b61006 [POWERPC] Uartlite: Separate the bus binding from the driver proper
Separate the bus binding code from the driver structure allocation code in
preparation for adding the of_platform_bus bindings needed by arch/powerpc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely
00775828e6 [POWERPC] Uartlite: Add macro for uartlite device name
Changed to make the following OF_platform bus binding patch a wee bit cleaner

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely
483c79db95 [POWERPC] Uartlite: change name of ports to ulite_ports
Changed to match naming convention used in the rest of the module

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely
a15da8eff3 [POWERPC] Uartlite: Fix reg io to access documented register size
The Uartlite data sheet defines the registers as 32 bit wide.  This
patch changes the register access to use 32 bit transfers and eliminates
the magic +3 offset which is currently required to make the device
work.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Williams <jwilliams@itee.uq.edu.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:14 -05:00
Paul Mackerras
70f227d884 Merge branch 'linux-2.6' into for-2.6.24 2007-10-03 15:33:17 +10:00
Jochen Friedrich
d214602804 [POWERPC] Fix cpm_uart driver for cpm1 machines
in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp.
On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't
be used for arithmetric compare operations with virtual addresses
returned by cpm_dpram_addr. This patch changes the assignment to use
cpm_dpram_addr as well, like in cpm_uart_cpm2.h.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28 10:26:30 -05:00
Thomas Bogendoerfer
744551cceb [SUNSAB]: Fix broken SYSRQ.
Include SYSRQ support for SUNSAB if SUNSAB_CONSOLE is selected

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 22:49:37 -07:00
David Woodhouse
e4533b243e [POWERPC] Optionally use new device number for pmac_zilog
This adds the option for the pmac_zilog driver to use the major/minor
numbers recently allocated specifically for it (/dev/ttyPZn) instead
of the /dev/ttySn numbers.  The advantage of doing this is that it
allows the pmac_zilog and 8250 drivers to coexist.  The disadvantage
of doing this is that it is a user-visible ABI change and it will
break existing working setups on powermacs, and could be confusing to
users.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Paul Mackerras
0ce49a3945 Merge branch 'linux-2.6' 2007-09-20 10:09:27 +10:00
Olaf Hering
aa0154290f [POWERPC] Fix pmac_zilog debug arg
drivers/serial/pmac_zilog.c:1590: warning: format '%d' expects type 'int', but argument 3 has type 'pm_message_t'

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 14:40:54 +10:00
Al Viro
9c5b34806c [SUNSAB]: Fix several bugs.
* don't register irq until ->startup() (and release in ->shutdown()).
That avoids oopsen with the current tree when interrupt comes before we'd
set up the data structures for ttyb.
	* handle console=ttyS... even when OBP talks to screen/keyboard
	* register irq handler for each port, let kernel/irq/handle.c
call it for both if needed.  Kills code duplication in sunsab_interrupt().
BTW, there'd been bitrot in it - ttya handling had stopped calling
check_status() on BRK (correctly), ttyb copy of that code had kept the
bogus call in that case.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 16:47:07 -07:00
John Rigby
af6a9aabc1 [POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct index
Use idx as index into mpc52xx_uart_nodes instead of i

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:05 -05:00
Adrian Bunk
7111de7643 fix SERIAL_CORE_CONSOLE driver dependencies
SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y.

Additionally, this patch fixes whitespace instead of tabs at the
SERIAL_MUX_CONSOLE option.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:27 -07:00
Thiemo Seufer
719b6f29fc BCM1480 serial build fix
Restores serial functionality for the BCM1480.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:19 -07:00
Ralf Baechle
f79abb828e Fix modpost warning in serial driver
This is triggered if PCI && !HOTPLUG.

  MODPOST vmlinux.o
WARNING: vmlinux.o(.data+0xc910): Section mismatch: reference to .init.text:pci_ite887x_init (between 'pci_serial_quirks' and 'serial_pci_tbl')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
David S. Miller
4f1296a516 [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c
resource_size_t can be either a u64 or a u32, and we can't
really know for sure, so when printing such a value out
always use long-long printf formatting and cast the argument
to that type.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26 18:49:11 -07:00
Olof Johansson
aa79850562 serial: add pci ids for PA Semi PWRficient onchip uarts
Add PCI IDs for the onchip UARTs on PA Semi PWRficient.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Christian Schmidt
436bbd431d Add blacklisting capability to serial_pci to avoid misdetection of serial ports
The serial_pci driver tries to guess serial ports on unknown devices based
on the PCI class (modem or serial).  On certain softmodems (AC'97 modems)
this can lead to the recognition of non-existing serial ports.

This patch adds a blacklist of PCI IDs that are to be ignored by the driver.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Christian Schmidt <schmidt@digadd.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Corey Minyard
ad4c2aa635 Serial 8250: handle saving the clear-on-read bits from the LSR and MSR
Reading the LSR clears the break, parity, frame error, and overrun bits in
the 8250 chip, but these are not being saved in all places that read the
LSR.  Same goes for the MSR delta bits.  Save the LSR bits off whenever the
lsr is read so they can be handled later in the receive routine.  Save the
MSR bits to be handled in the modem status routine.

Also, clear the stored bits and clear the interrupt registers before
enabling interrupts, to avoid handling old values of the stored bits in the
interrupt routines.

[akpm@linux-foundation.org: clean up pre-existing code]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Atsushi Nemoto
999999616e serial_txx9: Fix modem control line handling
This chip does not have modem control lines.  Return TIOCM_CAR and
TIOCM_DSR always on get_mctrl() and ajust some bits in termios cflag.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Niels de Vos
84f8c6fc0e serial: add support for ITE 887x chips
Add support for the it887x-chips (PCI) manufactured by ITE.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
David Woodhouse
20620d688a serial: don't optimise away baud rate changes when BOTHER is used
The uart_set_termios() function will bail out early without bothering to
touch the hardware, if it decides that nothing "relevant" has changed.
Unfortunately, its idea of "relevant" doesn't include c_[io]speed.  So if
the baud rate bits are BOTHER and you just change the speed, the change
gets optimised away.

This patch makes it ignore the old Bfoo bits in c_cflag and just check
whether c_ispeed and c_ospeed have changed.  Those integers are always set
appropriately for us by set_termios().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Mike Frysinger
bbf275f092 Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230
pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230
as when that was fixed, the fallout also fixed the break flood

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 16:48:08 +08:00
Sonic Zhang
a359cca71e Blackfin arch: update kgdb patch
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 16:47:58 +08:00
Robin Getz
0ae53640b5 Blackfin arch: Initial patch to add earlyprintk support
This allows debugging of problems which happen eary in the kernel
boot process (after bootargs are parsed, but before serial subsystem
is fully initialized)

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:24:49 +08:00
Daniel Ritz
b6b1d87785 serial: fix 8250 early console setup
the early setup function serial8250_console_early_setup() can be called
from non __init code (eg. hotpluggable serial ports like serial_cs) so
remove the __init from the call chain to avoid crashes.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03 15:02:56 -07:00
Maciej W. Rozycki
86d0004abc sb1250-duart: __maybe_unused, etc. fixes
This is a set of small fixes addressing points raised with the original
driver submission.  In particular, __maybe_unused is used rather than a
local hack and sbd_ops is made const.  Additionally I have made two local
string variables automatic as rodata space was wasted for pointers
unnecessarily.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:43 -07:00
Mark A. Greer
2e89db75ae serial: MPSC: Fix coding style and whitespace issues
Fix up mpsc.c to be aligned with Documentation/CodingStyle.  Also fix up some
whitespace issues.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Mark A. Greer
79f851733c serial: MPSC: Remove duplicate SUPPORT_SYSRQ definition
Remove the duplicate definition of SUPPORT_SYSRQ in mpsc driver.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Stephane Chazelas
5797ae364c serial: MPSC: Stop rx engine when CREAD cleared
Currently, the MPSC driver doesn't stop recieving characters when the CREAD
flag in termios->c_cflag is cleared.  It should.  Also, only start receiving
if its not already started.

Signed-off-by: Stephane Chazelas <stephane@artesyncp.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Carlos Sanchez
6c1ead5e77 serial: MPSC: Remove race between Rx stop & restart
The patch in commit ID f7232056bf stops (aborts)
the MPSC's receive engine just before restarting it.  Unfortunately, it
doesn't wait for the abort to complete before restarting it which creates a
race between the abort and the restart.  If the restart occurs first, the
in-progress abort stops it again and the rx engine remains stopped.

Instead, do the abort when the SDMA engine is being stopped.  Make sure to
wait for the abort to complete before continuing.

Signed-off-by: Carlos Sanchez <carlos.sanchez@gecoinc.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa
2174041d66 serial: fix vr41xx_siu serial console support
The serial console can select only SERIAL_VR41XX=y.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa
a95d32094c serial: fix vr41xx_siu interface select
only PORT_VR41XX_SIU can select interface.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa
a24ac9fba1 serial: fix section mismatch vr41xx_siu
Fix section mismatch vr41xx_siu.

WARNING: drivers/built-in.o(.text+0x2ce4c): Section mismatch: reference to .init.text:uart_parse_options (between 'siu_console_setup' and 'siu_request_port')
WARNING: drivers/built-in.o(.text+0x2ce70): Section mismatch: reference to .init.text:uart_set_options (between 'siu_console_setup' and 'siu_request_port')

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa
5b232ecfd9 DDB5477: remove driver bits of support
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Andrew Morton
57d4810ea0 revert "x86, serial: convert legacy COM ports to platform devices"
Revert 7e92b4fc34.  It broke Sébastien Dugué's
machine and Jeff said (persuasively)

  This seems like it will break decades-long-working stuff, in favor of
  breaking new ground in our favorite area, "trusting the BIOS."

  It's just not worth it for serial ports, IMO.  Serial ports are something
  that just shouldn't break at this late stage in the game.  My new Intel
  platform boxes don't even have serial ports, so I question the value of
  messing with serial port probing even more...  because...  just wait a year,
  and your box won't have a serial port either!  :)

  I certainly don't object to the use of platform devices (or isa_driver),
  but the probe change seems questionable.  That's sorta analagous to
  rewriting the floppy driver probe routine.  Sure you could do it...  but why
  risk all that damage and go through debugging all over again?

  It seems clear from this report that we cannot, should not, trust BIOS for
  something (a) so simple and (b) that has been working for over a decade.

Much discussion ensued and we've decided to have another go at all of this.

Cc: Sébastien Dugué <sebastien.dugue@bull.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Atsushi Nemoto
ddb437b7f7 serial_txx9: fix printk format mismatch
Since the commit 4f640efb31, "%lx" is not
suitable for p->mapbase (resource_size_t) in 32-bit.  This patch fixes a
compiler warning caused by the mismatch.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:37 -07:00
Linus Torvalds
6a302358d8 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: Fix fs.h removal from mm.h regressions.
  sh: fix get_wchan() for SH kernels without framepointers
  sh: arch/sh/boot - fix shell usage
  rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
  sh: remove support for sh7300 and solution engine 7300
  sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
  sh: Kill off virt_to_bus()/bus_to_virt().
  sh: sh-sci - fix SH7708 support
  sh: Restrict DSP support to specific CPUs.
  sh: Silence sq compile warning on sh4 nommu.
  sh: Kill the rest of the SE73180 cruft.
  sh: remove support for sh73180 and solution engine 73180
  sh: remove old broken pint code
  sh: Reclaim beginning of P3 space for vmalloc area.
  sh: Fix Dreamcast DMA issues.
  sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
2007-07-30 21:54:37 -07:00
Magnus Damm
d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Magnus Damm
0fbde9509d sh: sh-sci - fix SH7708 support
This patch makes sure the sci serial port driver compiles for sh7708.
The approach taken is to treat the sh7708 as a subset of sh7706, sh7707,
sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only
equipped with a single sci port. The platform data in setup-sh770x.c
already limits the number of serial ports for sh7708 to a single one,
so the non-existing scif ports pointed out in sh-sci.h will remain
unused in case of sh7708.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:35:54 +09:00
Greg Ungerer
931f9cde5c m68knommu: fix workqueues in 68328 serial driver
Fix workqueues in 68328 serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 11:05:01 -07:00