Commit Graph

66 Commits

Author SHA1 Message Date
Russell King
d83a12a409 [ARM] s3c: S3C options should depend on PLAT_S3C
This avoids non-Samsung builds being asked about Samsung specific
configuration options.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-21 15:02:07 +00:00
Russell King
6fd7c7fe72 [ARM] s3c: define __io using the typesafe version
as per 0560cf5aa5

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-18 23:29:15 +00:00
Ben Dooks
6a148eaa20 [ARM] S3C: Remove unnecessary <linux/delay.h> includes
As per Russell King's last review comment, find and remove
all unnecessary includes of <linux/delay.h> in the files
that do not need them.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:36:02 +00:00
Ben Dooks
dbf35992e1 [ARM] S3C24XX: Add fourth UART definition for S3C2443
Add the fourth UART definition for the S3C2443, and at the
same time fixup the problems caused by the enlarging of the
UART array in the previous commits.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:26:16 +00:00
Ben Dooks
bdd4915a9f [ARM] S3C: Update CONFIG_SERIAL_SAMSUNG_UARTS handling
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places
in the kernel where it had been missed. This finishes fixing a
long standing issue where S3C2443 and S3C64XX could not use the
4th UART

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:26:14 +00:00
Ben Dooks
56c035c9ce Merge branch 'next-s3c64xx-device' into next-merged
Conflicts:

	arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18 16:17:37 +00:00
Ben Dooks
7f2754378f Merge branch 'next-s3c64xx' into next-merged 2008-12-18 14:52:04 +00:00
Ben Dooks
28ab44c5be [ARM] S3C24XX: ADC driver core
A common core driver for the S3C24XX ADC block so that
the touchscreen, hwmon and any other drivers can share
the resource.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 14:20:04 +00:00
Ben Dooks
e7aa6f46f6 [ARM] S3C: Add UART FIFO selection during arch decompression
Add a configuration option to start the UART FIFOs during the
decompressions sequence to improve boot time when the bootloader
fails to enable the UART FIFOs.

For example, the SMDK6410 UBoot 1.1.6 leaves the FIFOs off.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:32:02 +00:00
Ben Dooks
9d325f2341 [ARM] S3C: Update time initialisation to fix S3C64XX time problems
The S3C64XX timer is running at the wrong rate due to the
assumptions made in the timer initialisation about the way
the pwm dividers work. This means that time on the S3C64XX
runs twice as fast as it should.

Fix the problem by moving to using the clk framework to setup
the pwm timer clock muxes, as the pwm-clock code has all the
necessary knowledge of how the timer clock inputs are routed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:13:02 +00:00
Ben Dooks
b09bcdd4c2 [ARM] S3C64XX: Update TCFG for new timer divider settings.
The S3C64XX series has a new TCFG divider setting to allow the clock
directly through, which means that we need to update the pwm-clock
code to cope with this.

Add <mach/pwm-clock.h> containing the specific code to deal with the
TCFG divider settings and provide any other per-arch data that the
pwm-clock driver needs to function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:01:23 +00:00
Ben Dooks
58435f7b2d [ARM] S3C: Add new FB device definition
Add a device definition for the new S3C framebuffer
driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:56:53 +00:00
Ben Dooks
1aba834da1 [ARM] S3C: Add i2c1 device definition
Add device definition and support functions for the
second i2c device (i2c1). If this is selected, the first
i2c bus will become index 0 instead of index -1.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:56:41 +00:00
Ben Dooks
8f995cc3ac [ARM] S3C: Add register defines for new style framebuffer
Provide  the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:55:10 +00:00
Ben Dooks
713e9dede6 [ARM] S3C: Fix SDHCI setup compilation
Fix the compilation of the SDHCI configuration/setup
functions to depend on their respective configuration
variables.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:54:21 +00:00
Ben Dooks
d6bc5f70e0 [ARM] S3C6410: Fix gpio configuration for channel 1.
Select the correct GPIO configuration function for channel 1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:53:59 +00:00
Ben Dooks
6a5f4b8535 [ARM] S3C64XX: Fix missing definition of s3c64xx_init_io()
The function s3c64xx_init_io was missing from <plat/cpu.h>
and was masked by the SMDK6410 having an local definition.

Fix by removing the SMDK6410 variant and adding it to the
relevant <plat/cpu.h> file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:48:20 +00:00
Ben Dooks
4f507d19ca [ARM] S3C: Add header for initial i2c device core setup.
Add a header to define setup functions for the i2c
devices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:47:03 +00:00
Ben Dooks
3e1b776c2b [ARM] S3C: Make i2c device definition common to plat-s3c
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:26 +00:00
Ben Dooks
a2205cd2cb [ARM] S3C: Add SDHCI (HSMMC) channel 1 device definition
Add device definition and support code for the Samsung
HSMMC channel 1 device.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:07 +00:00
Ben Dooks
5cc7fd88fc [ARM] S3C6410: Add helper for setting SDHCI device information
Add the necessary helper functions for setting up the SDHCI
device information.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:39:34 +00:00
Ben Dooks
ea522c7a54 [ARM] S3C: Add Samsung SDHCI register definitions
Add the specific register definitions for the Samsung SDHCI
(HSMMC) block for the S3C2443 and S3C64XX series.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:39:24 +00:00
Ben Dooks
21b23664b9 [ARM] S3C: Add new GPIO configuration calls
Add new GPIO configuration calls that mesh with the
new gpiolib support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:34:15 +00:00
Ben Dooks
8a53bdb907 [ARM] S3C: Add GPIO chip tracking
The gpiolib driver keeps its chip array to itself
and having a separate array for s3c-only gpios stops
any non-s3c gpio being used in one of the s3c specific
configuration calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:42 +00:00
Ben Dooks
7db6c82a37 [ARM] S3C: Move common GPIO code from plat-s3c24xx
Move the common parts of the GPIO code into plat-s3c
for use with both the s3c24xx and s3c64xx systems.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:20 +00:00
Ben Dooks
efd3a8eb15 [ARM] S3C64XX: Add gpio bank numbering
Define the gpio numbers for the S3C64XX GPIO banks
available on the S3C6400 and S3C6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:08 +00:00
Ben Dooks
5b323c7beb [ARM] S3C: Move HSMMC device definition to plat-s3ec
Move the definition for the hsmmc device to plat-s3c
to be shared between the s3c24xx and s3c64xx platforms.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:32:34 +00:00
Ben Dooks
b690ace50b [ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs
Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:58:11 +00:00
Ben Dooks
cf18acf0e0 [ARM] S3C64XX: Clock support for S3C6400/S3C6410
Add the PLL clock initialisation and clock registration
and include the clocks sourced via CLKDIVx for most of
the on-chip peripherals.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:54:36 +00:00
Ben Dooks
c652d2ddb9 [ARM] S3C: Add TICK_MAX for timer code
Add TICK_MAX definition for the timer code
as the S3C64XX series have 32bit capable
PWM timers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:54:16 +00:00
Ben Dooks
4b31d8b225 [ARM] S3C64XX: Add initial clock framework
Add the initial clocks definitions for the s3c6400
and s3c6410. Move the epll and ext clock from the
s3c2443 support into the common code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:53:58 +00:00
Ben Dooks
f982dc5321 [ARM] S3C64XX: Map timer memory and interrupts
Add the physical to virtual memory mapping and the
necessary interrupt demuxing for the PWM timer blocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:52:51 +00:00
Ben Dooks
e550ae7416 [ARM] S3C: Fix PWM build on S3C6400
The pwm-clock.c needs <mach/map.h> which is included
via other means on S3C24XX systems, so ensure it is
explicitly included.

Remove the includes of regs-clock.h and regs-gpio.h as
these are not needed by the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:52:11 +00:00
Ben Dooks
d9b79fb568 [ARM] S3C64XX: Add VIC0 and VIC1 sourced interripts
Add and initialise the two VIC (PL192) found on
the S3C64XX series CPUs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:51:22 +00:00
Ben Dooks
0241cbb9d6 [ARM] S3C64XX: Add UARTdevice definitions
Add resources and information for the UART deviecs
on the S3C64XX CPUs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:49:46 +00:00
Ben Dooks
e1a2bd1d2f [ARM] S3C64XX: Add system boot-time support
Add the necessary defines for <mach/uncompress.h>
to function and build an working header code block.

Signed-off-by: Ben Doioks <ben-linux@fluff.org>
2008-12-15 21:49:32 +00:00
Ben Dooks
a08ab63761 [ARM] S3C64XX: Initial arch directory
Add the initial PLAT_S3C64XX support files
and directory structure.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:47:24 +00:00
Ben Dooks
9bc1aaeac0 [ARM] S3C24XX: Split timer pending code out
Split the timer pending code out to a seperate per-machine
header so that when compiling for mach-s3c2410 or mach-s3c24a0
we can use the right timer code without having to #ifdef the
timer driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:41 +00:00
Ben Dooks
bcae8aeb32 [ARM] S3C24A0: Initial architecture support files
Initial architecture support for the S3C24A0 ARCH_S3C24A0.

We don't yet add an kconfig entry in the main arch/arm/Kconfig
file as the series is not complete, so that is left until enough
support is in to be useful.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:39 +00:00
Ben Dooks
ce46a9c497 [ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410
Split the map.h definitions into common S3C24XX code by
adding arch/arm/plat-s3c24xx/include/plat/map.h and
altering the machine specific header for the S3C24A0.

As we add a new <plat/map.h> we move the original one
in arch/arm/plat-s3c include directory to be called
map-base.h to distinguish the two files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:38 +00:00
Sandeep Patil
1d4bab0824 [ARM] S3C24A0: Serial port definitions and driver support.
Add serial support for S3C24A0, based on current S3C2410
UART driver. It adds necessary new defines in regs-serial.h
for S3C24A0 and the code to support this device in
drivers/serial/s3c24a0.c

Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:36 +00:00
Ben Dooks
f0c9eb4ec2 [ARM] S3C24A0: Debug macro definitions
Add the necessary debug macros for the S3C24A0 to enable
kernel debugging, and fix a bug with selecting the wrong
default debug implementation from the base include.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:33 +00:00
Ben Dooks
7d2dbcf9fa [ARM] S3C: Fix scaler1 clock rate information
The pwm-scaler0 and pwm-scaler1 clocks have their
.id field set to -1 as they are not referenced to
any specific device. However, parts of the pwm-clock
code used the .id field to identify which scaler
clock was being used.

Fix the problem by comparing against the pointer to
the clock to identify the scalers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:25 +00:00
Ben Dooks
82fd8e681d [ARM] S3C: Add set_rate/round_rate methods for pwm-scaler clock
Add the set_rate and round_rate methods for the pwm-scaler
clock for use with the time code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:24 +00:00
Ben Dooks
cec444b790 [ARM] S3C: BUG_ON() if clock has already been registered
Add a simple check when registering a clock on whether
the clock has already been added to the list.

Any attempt to re-register a clock will cause the
clock list to be come looped and thus produces silent
failures when looking up clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:22 +00:00
Ben Dooks
93b458858f [ARM] S3C: Move pwm-clock.c to arch/arm/plat-s3c
Move pwm-clock.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:20 +00:00
Ben Dooks
adbefaa5fd [ARM] S3C: Move core clock support to plat-s3c
Move the core clock registration and definitions
in arch/arm/plat-s3c24xx/clock.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:18 +00:00
Ben Dooks
b915a12511 [ARM] S3C: Move time.c to arch/arm/plat-s3c
Move time.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:15 +00:00
Ben Dooks
6af0e929e9 [ARM] S3C: Move S3C2410_EXTINT to common regs-irqtype.h header
Add a common include file (regs-irqtype.h) for the IRQ
trigger control register values S3C2410_EXTINT*.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:13 +00:00
Ben Dooks
a503059c14 [ARM] S3C24XX: Move headers from plat-s3c24xx to plat-s3c
Move clock.h, cpu.h and devs.h to plat-s3c for use
with the s3c64xx support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:10 +00:00