qcacld-2.0 to qcacld-3.0 propagation.
Send tdls mgmt frames with VI tid to give more priority
to tdls mgmt frames.
CRs-Fixed: 873749
Change-Id: I9196680f09678185c1010b472851c1aca00b1635
We already know kernel version is more than equal to 3.10.
So remove static checks for any previous kernel.
Change-Id: I4e17614fae47782a02dd528c7b4adf3d2802ec69
CRs-Fixed: 920681
qcacld-2.0 to qcacld-3.0 propagation
Fix incorrect completion of pending CONS RM request/release
notification, which is sent when receiving PROD RM notification
from IPA. Also cleanup pending CONS request flag when IPA resource
loading/unloading is compelted.
Change-Id: Ie37b7d21e1ad016dbaf9aa0f89c97402911b4a02
CRs-Fixed: 943635
qcacld-2.0 to qcacld-3.0 propagation
When IPA requests WLAN CONS resource while IPA resource loading is in
progress, resource will not be granted even after the loading is
completed. This will eventually result IPA uC timeout.
Change-Id: Iae8373c43709cbbccef790973642f5992ddcd359
CRs-Fixed: 943635
qcacld-2.0 to qcacld-3.0 propagation
Since CLIENT_CONNECT message is sent to IPA before enabling WDI pipes,
CLIENT_CONNECT message count could be more than CLIENT_DISCONNECT
count, and this could cause an abnormal behavior in the IPACM.
Change-Id: I03d30c7f82aadf83979084b7e65b8ed14565588d
CRs-fixed: 941894
Module_init waits for probe to complete after registering the
driver. But this is unnecessary and module load is intended for
loading the module but probe would be called when hardware is
ready. Remove the wait during module_init.
Change-Id: Ic2fe7efa78a1527acf1fd5b7689d70f6d450ccd3
CRs-fixed: 950170
In module init, bunch of initializations are done which are not
required till probe call back gets called. Also in module exit,
some clean-up done which should wait till remove call back gets
called. Move the initialization done in module init to probe call back and
clean-up done in module exit to remove call back.
Change-Id: Id4a0cb21300de1ceab8ed043638b735f31d516d4
CRs-fixed: 950170
For statically linked driver, con_mode is used for moving from
machine mode to FTM mode but it has conditional compilation
issues. Fix the conditional compilation to properly compile when
FTM feature is enabled.
Along with it, unify the usage of con_mode such that
curr_con_mode is the variable which holds the connection mode
passed as part of module parameter as well as set by the driver.
Change-Id: I7d6a5c9b82d1dbb727208caca78089d6be357e71
CRs-fixed: 950170
Move module init/exit related implementation together and at the
end of the file.
Change-Id: I17a02e4fdddc17fc3a725c29e89a52f5bd9d49b9
CRs-fixed: 950170
qcacld-2.0 to qcacld-3.0 propagation.
FW checks the peer Rx LDPC capability in ht and vht capabilities
to do Tx LPDC. But host sets the Tx LPDC flag in peer_flags.
To disable Tx LDPC reset the Rx LDPC capability in peer ht
and vht caps based on Tx LPDC configuration in INI.
Change-Id: I211fd73fd70a35faaf4cfc2c5dc8d842c7ff1e5a
CRs-Fixed: 894306
LFR3 to indicate the change in IP subnet to user space (supplicant).
This enables the DHCP refresh in case of IP subnet change during
roaming.
Change-Id: I9842a28461346fe97ab39f5a11ae504f2e32fa16
CRs-Fixed: 876335
Add handler for gateway parameter request vendor command. The
request is issued to update the gateway parameters to be used
during subnet detection post roaming.
Change-Id: I848f24b36a1d65a0e8bb8465b2b6f2016cb2224c
CRs-Fixed: 876335
Add LFR subnet detection support to protocol stack and
device access layers. In LFR3, the device may perform multiple
roams (may be across multiple IP subnets) without the knowledge
of wlan host. The LFR subnet detection feature enables the device
to regain IP connectivity if the firmware has roamed across the
subnets which otherwise is not possible without disconnect and
reconnect.
Change-Id: I60959af8b6ed330313a7f08f8aa1edfb63938bb8
CRs-Fixed: 876335
Add an INI item to configure LFR subnet detection feature.
LFR subnet detection is enabled by default.
Change-Id: Ifb4bba60dfcd0347137f4a690db50b0c453d1ae8
CRs-Fixed: 876335
At present and going forward ESE and ESE_UPLOAD will be the
de-facto approach of supporting ESE.
There is no support for #ifndef FEATURE_WLAN_ESE_UPLOAD block of code.
Hence clean up this code.
Change-Id: I1e1307ec3430353496b1cf7aaa2eb5291ca1d5b2
CRs-Fixed: 949634
Currently tx STBC param sent to FW is taken from peer's response frame, which
is wrong if current hardware does not support 2x2 for given channel width.
Update the driver to check number of tx stream for current vdev and clear txSTBC
if needed.
Change-Id: If05e5de72ba5af95b343817d811db0f413493ee1
CRs-Fixed: 941217
qcacld-2.0 to qcacld-3.0 propagation
Fix soft AP to not send Assoc response for Assoc req which is
unprotected and initiated by an injector rather than a testbed
station.
If STAUT sends duplicate Assoc request, Assoc response should
be sent only in case of non-PMF connection.
Change-Id: I6fb4c139af333c937e767cb111df4d1d69bddbd9
CRs-Fixed: 902969
qcacld-2.0 to qcacld-3.0 propagation
Add configuration option for mpdu density through INI. Update
the default value of mpdu density from 0 to 7.
Change-Id: Ib97869d4aec160065c945cd62876d6fd191d63a5
CRs-Fixed: 941182
qcacld-2.0 to qcacld-3.0 propagation.
Current TDLS default teardown interval does not work in
all the scenarios. Hence, change the default teadown
interval to 5 seconds and default TDLS idle packet
threshold to 3 to support all TDLS use cases.
Change-Id: Idf8b4cd02963d24350a1322ac4c7465fbfc7204f
CRs-Fixed: 936003
qcacld-2.0 to qcacld-3.0 propagation.
Add new TDLS mode for TDLS external control operation to
achieve power save on the target. Firmware will use this mode
to control timers precisely and save the power.
Add configuration "gTDLSPeerKickoutThreshold" to fine tune
TDLS peer sta kick out operation.
Change-Id: Ie941f93b54983ca6323ef4384a66e0807a56a7b1
CRs-Fixed: 929749
qcacld-2.0 to qcacld-3.0 propagation.
Firmware uses same notification interval to send trigger to the
driver for both TDLS setup and TDLS teardown operations. In ideal
scenario firmware needs to have an option to configure different
values for TDLS setup and TDLS tear down operations. This change
will enable firmware to have different values for setup and
teardown operations.
Change-Id: I300350c56d4ef23993953338529f29df2ea122a1
CRs-Fixed: 920835
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_green_ap.c to use the unified set of APIs.
Change-Id: If58683a833b1650a6cbea147debcead2551697da
CRs-Fixed: 937202
Propagation from qcacld-2.0 to qcacld-3.0
- WLAN firmware does not support get/set operations for power
gating VDEV parameters
- Remove support for power gating VDEV parameters from WLAN host
driver
Change-Id: I5b262b71364c11f648b579a8bdb6fa993ecb4a81
CRs-Fixed: 880180
qcacld-2.0 to qcacld-3.0 propagation
Sometime the thread sleeps in kzalloc for long time, resulting in
thread stuck.
This change prints time taken by kzalloc, if time taken is more
than 3 seconds.
Change-Id: I027ab2ad4e93f8a02ba9e48e47d7aa3123785a31
CRs-Fixed: 926479
qcacld-2.0 to qcacld-3.0 propagation
Too many log prints are seen by default if unhandled action frame
are received.
This change lowers the log level for unhandled Action frame logs.
Change-Id: I4af258eed12c2f352f97df0f73e9ab0c6278a437
CRs-Fixed: 924661
qcacld-2.0 to qcacld-3.0 propagation
If connect is received and queued to sme pending list while scan
is in progress in sme, once scan is completed, again scan is
queued to get the scanned channel info with reason
eCsrScanGetScanChnInfo behind connect command.
Connect is executed next with scan command in pending queue.
Now if disconnect is received from hdd it is also queued in sme
pending cmd list behind scan.
Once connect is executed the wait for key state is set and wait
key timer is started. As only disconnect and set key command are
allowed in wait for key state, the pending cmd queue is not
executed with scan command at the head and thus the disconnect is
not executed. Also as supplicant has issued disconnect, no keys
will be set and pending command queue will not be processed till
wait for key timer expires.
If during this time unload starts all the commands including the
disconnect command sme pending queue are flushed and thus no
DEL BSS is sent to firmware before HAL STOP which leads to crash.
To avoid this add disconnect to the head of sme pending command
list so that disconnect can be processed after connect during
wait for key state.
Change-Id: I333e7b103ac10e368d34b5bf8b87cc360650cd50
CRs-Fixed: 930713
Since management frames have been added to the wmi pipe,
the wmi pipe may fill up before the driver schedules the
tx completion processing.
Make tx completion processing use the DDR ce index to
avoid register access durring reaping.
Change-Id: I213aa0274d3c66e583bcdb700ced1133c2c30ebc
CRs-Fixed: 945831
Fix WMI command path Tx failure case:
1) Current WMI command path frees the packet with dummy completion when hif
fails to send the packet down. Fix it by putting back cmd to endpoint
Tx queue for retry.
2) Also separate WMI mgmt command/event log buffer from control path
command logs
Change-Id: Icc3f7fde10a592de3c5354ba720d6810ce1b635a
CRs-Fixed: 940100
Ignore HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND from firmware if
management over WMI is enabled.
Change-Id: Ic196d17526c251ae26dd59ca2f42b7bff9a46ffe
CRs-Fixed: 949946
Do not reserve tx descriptors for management packets
if management over WMI is enabled.
Change-Id: Iafe758d91d11f4875e3152d92538055784490a14
CRs-Fixed: 949917
Use list_for_each_entry_safe API to traverse list
while deleting list entry in cds_drop_rxpkt_by_staid
to avoid crash.
CRs-Fixed: 943767
Change-Id: I4d09fd88f0faefacfc886866d9045b09feeb4432
Remove per vdev tx descriptor pool feature as
it is applicable only for High Latency.
CRs-Fixed: 916724
Change-Id: I22ab3dd187518790694356bdde8475b194845bf5
a) Enabled flow control
b) Add small helper functions to avoid duplication of
code.
c) Fix thermal mitigation unpause issue with flow control.
CRs-Fixed: 916716
Change-Id: Ic02b66d1c23768a1c71dc08ed50dcedd02b647ce
This is a qcacld-2.0 to qcacld-3.0 propagation.
QCACLD firmware already addresses power concern during PNO scanning by
extending fast_scan_period, slow_scan_period and fast_scan_max_cycles
configuration which need to be set by the host driver.
Add the host driver support to do the same.
Description:
1. fast_scan_period: This is the fast PNO scan period. The scan interval time
sent down by the supplicant is assigned to this.
2. fast_scan_max_cycles: This parameter tells firmware to switch from
fast to slow scan period after this many number of fast_scan_periods
has elapsed.
3. slow_scan_period: This is slow PNO scan period with which scan happens
less frequently to save power. Once the FW switches from fast to slow period,
it remains in slow scan period until next PNO Start.
cfg.ini items:
1. Repurpose gPNOScanTimerRepeatValue to fast_scan_max_cycles.
2. Introduce new cfg.ini gPNOSlowScanMultiplier to act as multiplier of
fast_scan_period.
Change-Id: I453f09d42be3228ecc9c5023eca26eae1e589d6a
CRs-Fixed: 902381
qcacld-2.0 to qcacld-3.0 propagation
Add new RTT related wmi interface changes to support
TLV based messaging.
Change-Id: I0591907984c3c58039a06ce123dca777d24c590f
CRs-Fixed: 865207
Fix mangled APIs sme_configure_ext_wo_w,
sme_process_ready_to_ext_wo_w and
lim_remove_timeout_pbc_sessions which were introduced
while converting the names programmatically.
Change-Id: Ie0a79b476a99bf1be0411dae0542359e7d58141a
CRs-Fixed: 882962
qcacld-2.0 to qcacld-3.0 propagation
During SSR, Host is sending packets to firmware before WMI_READY_EVENT.
Fix is to avoid sending tx when logp_in_progress & clean ll-queue
packets in shutdown.
Change-Id: Ib6b9f4d51f2aa7f85d384831818b45763c702c88
CRs-Fixed: 834887
qcacld-2.0 to qcacld-3.0 propagation
Multicast packets using different sequence number space
gets dropped on the host due to the existing logic of
running duplicate detection check and out-of-order packet check
on all non-aggregation (legacy) TIDs, since f/w uses a
special (non-aggregation) TID (18) to indicate these packets
to the host, irrespective of sequence number space.
The fix is in 2 parts:
1) Do only duplicate detection on mcast packets & not out-of-order check
(Also do dup-detection only if retry bit is set)
2) Instead of using mcast TID indicated by f/w, use the actual
packet TID from the Rx descriptor to perform the duplicate detection
and use a separate (new) field in rx_reorder_array to store
the last successful mcast sequence number. On the next mcast packet
perform the duplicate detection against mcast sequence number, rather
than the ucast sequence number.
Change-Id: I4c3542e82a1917b4ed27513e9244702bb212df88
CRs-FIXED: 788954
qcacld-2.0 to qcacld-3.0 propagation
In Low-latency interface, to avoid 1d2 happening during roaming
test, host need to send HTC header to fw, by setting SendFlags
to zero to avoid deadlock situation.1d2 happened during roaming
test.
Change-Id: Ib3d16deadf038708fb75bcba692bd6adf3959c4e
CRs-Fixed: 807505
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Return value of memcmp function must be checked with NOT operation.
Change-Id: Ic866a70917c1e713855c28a8f156ffe7c381fa07
CRs-Fixed: 642070
qcacld-2.0 to qcacld-3.0 propagation
Current implementation defers all the received frames
when ADD TS request is sent out over the air. This,
in addition, to check for pMac->lim.gLimAddtsSent
incurs delay, till ADD TS response timeout, in processing
of the ADD TS response received if SET_LIM_PROCESS_DEFD_MESGS
is set to FALSE. As there is no rationale defer processing
of Rx frames while waiting for ADDTS response, changes are
made to not defer processing of RX frames for the same.
Change-Id: I1d1a41a0e3555ae19548a0cabf3b9569af775f72
CRs-Fixed: 839546
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Change-Id: Ifa30ed624c1f9f3c549def45cdb9e5f8ebfae233
CRs-Fixed: 627650
qcacld-2.0 to qcacld-3.0 propagation
This reverts Change-Id I858cd3cbd536ec189ea808c5d637abffe388f7aa.
With change id I858cd3cbd536ec189ea808c5d637abffe388f7aa,
host is not sending WMI_STA_UAPSD_AUTO_TRIG_CMDID command to firmware
during disable UAPSD per AC.
Change-Id: Ifdbcd6926ca86b1baeeadcf7a4720e460d41a6e5
CRs-Fixed: 911229
This is qcacld-2.0 to qcacld-3.0 propagation
Avoid invoking vfree inside spinlock during logging service
activation and deactivation. Since vfree is prone to sleep, this
disables the IRQs for duration longer than the acceptable limit.
vfree can be done without spin lock here, as there is no
synchronization issue in this scenario.
CRs-Fixed: 914363
Change-Id: I4d69431a98a4e4301dfc1e2b3b4c40c408a7ef99
For OEM to do OTA tests, power save, background scan, and low RSSI
scanning need to be disabled and it should be done dynamically.
Implement a vendor command to enable and disable OTA test mode.
CRs-fixed: 941776
Change-Id: Ic9da11cf5f4bb19a01d9b55c50c0aea196abbfb6
In P2P GO + GO concurrency case, only DBS mode is supported for
the two interfaces. Second P2P GO interface startup is blocked
if its channel is on the same band as the first P2P GO interface.
Change-Id: Ic85bd8f92983c8c08f61fdaf09be1ad13a17cd8f
CRs-fixed: 945804
qcacld-2.0 to qcacld-3.0 propagation
Default value of Tx beamformee is 0.
As as part of fix, enable the default value
of Tx beamformee.
Change-Id: Ib4b30f2a925e95cd96cc789ac7bc223274fa6a67
CRs-Fixed: 921834
qcacld-2.0 to qcacld-3.0 propagation
Currently tpAniSirGlobal pnoOffload value is initialized with
FW caps first time only and resetting to 0 while starting a bss in
go mode. Existing value of pnoOffload is not retained while
getting config for tSmeConfigParams.
Added changes to retain current value of pnoOffload from
tpAniSirGlobal while getting config for new tSmeConfigParams.
Change-Id: I0eda12ec1c69aeca4465d41f3e3ba96b8e1944cb
CRs-Fixed: 913994
qcacld-2.0 to qcacld-3.0 propagation
Add support to parse operating class from xcsa frame and select
channel bandwidth on basis of new operating class.
Change-Id: I33d794e77220ef82cca793767d459979eb940669
CRs-Fixed: 942104
qcacld-2.0 to qcacld-3.0 propagation
Currently there are many LL stats related logs
which doesn't provide any useful information.
As a part of fix, remove all those redundant logs.
Change-Id: Id1a89f209cfb57646828c5ee059f6f3790aac1c0
CRs-Fixed: 903941
qcacld-2.0 to qcacld-3.0 propagation
In Stop Adapter IBSS mode is not handled properly and
no DEL BSS is sent for the connected IBSS before DEL SELF STA.
This may lead to crash in FW.
As part of fix handle the IBSS mode and send DEL BSS if IBSS is
connected.
Change-Id: Ice1304aced1a158c7b589a95337412cda0183a04
CRs-Fixed: 908990
qcacld-2.0 to qcacld-3.0 propagation
If deauth is received just after Assoc rsp from AP in addSTA
response Re/assoc confirm is sent with status failure.
But protStatusCode in assoc confirm is not updated and thus the
pRoamInfo->reasonCode may have garbage value.
In case of Wep connection failure reason code,
pRoamInfo->reasonCode, is sent to the supplicant in connect
result. Now if pRoamInfo->reasonCode is 0 supplicant receives
connection success though connection have actually failed.
To avoid this update protStatusCode, before sending Re/assoc
failure.
Also properly derive if connection is WEP from roamProfile before
clearing it.
CRs-Fixed: 926572
Change-Id: I5ae0832d37746be16696f521bddd5b67307b1ee4
wdi20 enable implementation for hsoffload. Large physical address
support and wdi20 interface propagate to IPA.
part of HDD and CDS
Change-Id: Iaccab3ae233e0b9a8e4942bee0ebaa40ce94fc16
CRs-fixed: 941041
wdi20 enable implementation for hsoffload. Large physical address
support and wdi20 interface propagate to IPA.
This is part of HIF and DP.
Change-Id: If898f03a8a75689c98c70d1e55910f476d8fe329
CRs-fixed: 941041
qcacld-2.0 to qcacld-3.0 propagation
IPA pending_event list keeps IPA events arrived while IPA resource
loading/unloading.
This list is freed only when TX/Rx resume/suspend OP code from FW.
This change is to limit the pending event list size and free up the
pending event list when WLAN driver is unloaded.
Change-Id: Id0489a59bd3c2b04d2faba1069df7b2244a2a730
CRs-Fixed: 937765
qcacld-2.0 to qcacld-3.0 propagation
In the case of SAP + STA mode we fail to enable PNO on the STA interface,
and as a result the PNO feature will fail to find a network and wake the
host. Fix this by making sure PNO is configured in all appropriate
concurrency cases.
Change-Id: I97084cfde73025f0d09b60616959c9530ba82c80
CRs-fixed: 921150
qcacld-2.0 to qcacld-3.0 propagation
While processing GET STATES IOCTL, in a while loop, HOST prints PE, LIM
and MLM states of each session. Normally while loading, HOST allocates
memory for five sessions, but while processing this IOCTL, it iterating
in a loop assuming there are 255 sessions allocated, leading to crash
because of invalid memory access.
Hence while printing PE, LIM and MLM states iterate only for allocated
number of sessions.
Change-Id: I29c9a627615a1983d23831578f45aefe116dac25
CRs-Fixed: 879950
qcacld-2.0 to qcacld-3.0 propagation
Add support in driver for a new vendor command to get
the link properties nss, rate flags and operating
frequency.
Change-Id: Ie3b8d5b2c3886055d303441c5d8b2f2a0a2719bd
CRs-Fixed: 834199
qcacld-2.0 to qcacld-3.0 propagation
PE generated disassoc request is not serialized in SME queue. This
results in corrupting 'lim.limDisassocDeauthCnfReq.pMlmDisassocReq'
which is a global context to save disassoc request.
Address the above by indicating all the PE generated disassoc requests
to SME and process disconnection request only after receiving
eWNI_SME_DISASSOC_CNF from SME(similar to that of processing disassoc
request from peer).
Change-Id: I2b93925ba64c4d9ff22b071dd2e5c7681be59e15
CRs-Fixed: 934183
qcacld-2.0 to qcacld-3.0 propagation
Honor NL80211_SCAN_FLAG_FLUSH scan flag by flushing
sme and lim scan cache entries.
Change-Id: I1ff59e583f815bfec2df458c58a40b30b7bffa00
CRs-Fixed: 934979
Currently as part of application triggered channel switch both the
channel bandwith and bonding mode are limited to 20MHz.
Change made to properly update the channel width and bonding
parameters.
Change-Id: I48297eed74c9e3bfed6fefa67f664f3503fac1f6
CRs-Fixed: 944647
qcacld-2.0 to qcacld-3.0 propagation.
Too many log prints are seen if mtrace are dumped and this cause
WD bark.
To avoid this lower the log level of mtrace to Info.
Change-Id: I05d3fa8b3494785a1933f159280b6c9ba6923c0d
CRs-Fixed: 926416
Propagation from qcacld-2.0 to qcacld-3.0
Added sanity checks for below variable before accessing in the
driver exit path.
nl_srv_sock
pdev_txrx_ctx
Change-Id: I793db21e1a6d1eded027ecbd2805494ea7610852
CRs-Fixed: 846457
qcacld-2.0 to qcacld-3.0 propagation
Create a configuration item to program the first bucket
threshold of the scan results to have the flexibility to
adjust the first bucket threshold.
CRs-Fixed: 922979
Change-Id: I6fad27a2990f7555173e4735131e8392d0277009
1) Check for bssid if it is NULL, before dereferencing it.
2) Check for hal_ctx if it is NULL, before dereferencing it.
CRs-Fixed: 940721
Change-Id: I836416a4717b15902e8b8f27fa2e5e5e7935c12f
